aboutsummaryrefslogtreecommitdiff
path: root/include/hw/riscv
AgeCommit message (Collapse)Author
2019-05-24target/riscv: Add a base 32 and 64 bit CPUAlistair Francis
At the same time deprecate the ISA string CPUs. It is dobtful anyone specifies the CPUs, but we are keeping them for the Spike machine (which is about to be depreated) so we may as well just mark them as deprecated. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24SiFive RISC-V GPIO DeviceFabien Chouteau
QEMU model of the GPIO device on the SiFive E300 series SOCs. The pins are not used by a board definition yet, however this implementation can already be used to trigger GPIO interrupts from the software by configuring a pin as both output and input. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-13Clean up decorations and whitespace around header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-9-armbru@redhat.com>
2019-04-04riscv: plic: Fix incorrect irq calculationAlistair Francis
This patch fixes four different things, to maintain bisectability they have been merged into a single patch. The following fixes are below: sifive_plic: Fix incorrect irq calculation The irq is incorrectly calculated to be off by one. It has worked in the past as the priority_base offset has also been set incorrectly. We are about to fix the priority_base offset so first first the irq calculation. sifive_u: Fix PLIC priority base offset and numbering According to the FU540 manual the PLIC source priority address starts at an offset of 0x04 and not 0x00. The same manual also specifies that the PLIC only has 53 source priorities. Fix these two incorrect header files. We also need to over extend the plic_gpios[] array as the PLIC sources count from 1 and not 0. riscv: sifive_e: Fix PLIC priority base offset According to the FE31 manual the PLIC source priority address starts at an offset of 0x04 and not 0x00. riscv: virt: Fix PLIC priority base offset Update the virt offsets based on the newly updated SiFive U and SiFive E offsets. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20sifive_uart: Implement interrupt pending registerNathaniel Graff
The watermark bits are set in the interrupt pending register according to the configuration of txcnt and rxcnt in the txctrl and rxctrl registers. Since the UART TX does not implement a FIFO, the txwm bit is set as long as the TX watermark level is greater than zero. Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20sifive_u: Add clock DT node for GEM ethernetAnup Patel
The GEM ethernet on SiFive unleashed has fixed input clock of 125MHz as-per SiFive FU540 manual. This patch updates FDT generation for QEMU sifive_u machine to provide fixed-rate clock for GEM ethernet. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20hw/riscv/virt: Connect the gpex PCIeAlistair Francis
Connect the gpex PCIe device based on the device tree included in the HiFive Unleashed ROM. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20hw/riscv/virt: Increase the number of interruptsAlistair Francis
Increase the number of interrupts to match the HiFive Unleashed board. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-09-04RISC-V: Use atomic_cmpxchg to update PLIC bitmapsMichael Clark
The PLIC previously used a mutex to protect against concurrent access to the claimed and pending bitfields. Instead of using a mutex, we update the bitfields using atomic_cmpxchg. Rename sifive_plic_num_irqs_pending to sifive_plic_irqs_pending and add an early out if any interrupts are pending as the count of pending interrupts is not used. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-07-05hw/riscv/sifive_u: Connect the Cadence GEM Ethernet deviceAlistair Francis
Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_plic: Use gpios instead of irqsAlistair Francis
Instead of creating the interrupt in lines with qemu_allocate_irq() use qdev_init_gpio_in() as this gives us the ability to use the qdev*gpio*() helpers later on. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_e: Create a SiFive E SoC objectAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Create a SiFive U SoC objectAlistair Francis
Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-05-06RISC-V: Make virt header comment title consistentMichael Clark
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Make some header guards more specificMichael Clark
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Remove unused class definitionsMichael Clark
Removes a whole lot of unnecessary boilerplate code. Machines don't need to be objects. The expansion of the SOC object model for the RISC-V machines will happen in the future as SiFive plans to add their FE310 and FU540 SOCs to QEMU. However, it seems that this present boilerplate is complete unnecessary. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Use ROM base address and size from memmapMichael Clark
Another case of replacing hard coded constants, this time referring to the definition in the virt machine's memmap. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Replace hardcoded constants with enum valuesMichael Clark
The RISC-V device-tree code has a number of hard-coded constants and this change moves them into header enums. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-03-07SiFive Freedom U Series RISC-V MachineMichael Clark
This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07SiFive Freedom E Series RISC-V MachineMichael Clark
This provides a RISC-V Board compatible with the the SiFive Freedom E SDK. The following machine is implemented: - 'sifive_e'; CLINT, PLIC, UART, AON, GPIO, QSPI, PWM Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07SiFive RISC-V PRCI BlockMichael Clark
Simple model of the PRCI (Power, Reset, Clock, Interrupt) to emulate register reads made by the SDK BSP. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07SiFive RISC-V UART DeviceMichael Clark
QEMU model of the UART on the SiFive E300 and U500 series SOCs. BBL supports the SiFive UART for early console access via the SBI (Supervisor Binary Interface) and the linux kernel SBI console. The SiFive UART implements the pre qom legacy interface consistent with the 16550a UART in 'hw/char/serial.c'. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stefan O'Rear <sorear2@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V VirtIO MachineMichael Clark
RISC-V machine with device-tree, 16550a UART and VirtIO MMIO. The following machine is implemented: - 'virt'; CLINT, PLIC, 16550A UART, VirtIO MMIO, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07SiFive RISC-V Test FinisherMichael Clark
Test finisher memory mapped device used to exit simulation. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V Spike MachinesMichael Clark
RISC-V machines compatble with Spike aka riscv-isa-sim, the RISC-V Instruction Set Simulator. The following machines are implemented: - 'spike_v1.9.1'; HTIF console, config-string, Privileged ISA Version 1.9.1 - 'spike_v1.10'; HTIF console, device-tree, Privileged ISA Version 1.10 Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07SiFive RISC-V PLIC BlockMichael Clark
The PLIC (Platform Level Interrupt Controller) device provides a parameterizable interrupt controller based on SiFive's PLIC specification. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stefan O'Rear <sorear2@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07SiFive RISC-V CLINT BlockMichael Clark
The CLINT (Core Local Interruptor) device provides real-time clock, timer and interprocessor interrupts based on SiFive's CLINT specification. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Stefan O'Rear <sorear2@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V HART ArrayMichael Clark
Holds the state of a heterogenous array of RISC-V hardware threads. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07RISC-V HTIF ConsoleMichael Clark
HTIF (Host Target Interface) provides console emulation for QEMU. HTIF allows identical copies of BBL (Berkeley Boot Loader) and linux to run on both Spike and QEMU. BBL provides HTIF console access via the SBI (Supervisor Binary Interface) and the linux kernel SBI console. The HTIT chardev implements the pre qom legacy interface consistent with the 16550a UART in 'hw/char/serial.c'. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Stefan O'Rear <sorear2@gmail.com> Signed-off-by: Michael Clark <mjc@sifive.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 07:49:19 +0000