aboutsummaryrefslogtreecommitdiff
path: root/include/hw/pci
AgeCommit message (Collapse)Author
2019-01-14pci/pcie: stop plug/unplug if the slot is lockedDavid Hildenbrand
We better stop right away. For now, errors would be partially ignored (so the guest might get informed or the device might get unplugged), although actual plug/unplug will be reported as failed to the user. While at it, properly move the check to the pre_plug handler for the plug case, as we can test the slot state before the device will be realized. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-09pci: allow cleanup/unregistration of PCI root busesMichael Roth
This adds cleanup counterparts to pci_register_root_bus(), pci_root_bus_new(), and pci_bus_irqs(). These cleanup routines are needed in the case of hotpluggable PCIHostBridge implementations. Currently we can rely on the object_unparent()'ing of the PCIHostState recursively unparenting and cleaning up it's child buses, but we need explicit calls to also: 1) remove the PCIHostState from pci_host_bridges global list. otherwise, we risk accessing freed memory when we access the list later 2) clean up memory allocated in pci_bus_irqs() Both are handled outside the context of any particular bus or host bridge's init/realize functions, making it difficult to avoid the need for explicit cleanup functions without remodeling how PCIHostBridges are created. So keep it simple and just add them for now. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-20pci/shpc: perform unplug via the hotplug handlerDavid Hildenbrand
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci: Reuse pci-bridge hotplug handler handlers for pcie-pci-bridgeDavid Hildenbrand
These functions are essentially the same, we only have to use object_get_typename() for reporting errors. So let's share the implementation of hotplug handler callbacks. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcie: perform unplug via the hotplug handlerDavid Hildenbrand
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/shpc: rename hotplug handler callbacksDavid Hildenbrand
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename shpc_device_hotplug_common() to shpc_device_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcie: rename hotplug handler callbacksDavid Hildenbrand
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename pcie_cap_slot_hotplug_common() to pcie_cap_slot_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Add link speed and width fields to PCIESlotAlex Williamson
Add fields allowing the PCIe link speed and width of a PCIESlot to be configured, with an instance_post_init callback on the root port parent class to set defaults. This allows child classes to set these via properties or via their own instance_init callback, without requiring all implementions to support arbitrary user selected values. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pci: Sync PCIe downstream port LNKSTA on readAlex Williamson
The PCIe link speed and width between a downstream device and its upstream port is negotiated on real hardware and susceptible to dynamic changes due to signal issues and power management. In the emulated device case there is no real hardware link, but we still might wish to have some consistency between endpoint and downstream port via a virtual negotiation. There is of course a real link for assigned devices and this same virtual negotiation allows the downstream port to match the endpoint, synchronizing on every read to support underlying physical hardware dynamically adjusting the link. This negotiation is intentionally unidirectional for compatibility. If the endpoint exceeds the capabilities of the downstream port or there is no endpoint device, the downstream port reports negotiation to its maximum speed and width, matching the previous case where negotiation was absent. De-tuning the endpoint to match a virtual link doesn't seem to benefit anyone and is a condition we've thus far reported without functional issues. Note that PCI_EXP_LNKSTA is already ignored for migration compatibility via pcie_cap_v1_fill(). Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Create enums for link speed and widthAlex Williamson
In preparation for reporting higher virtual link speeds and widths, create enums and macros to help us manage them. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* icount fix (Clement) * dumping fixes for non-volatile memory (Marc-André, myself) * x86 emulation fix (Rudolf) * recent Hyper-V CPUID flag (Vitaly) * Q35 doc fix (Daniel) * lsi fix (Prasad) * SCSI block limits emulation fixes (myself) * qemu_thread_atexit rework (Peter) * ivshmem memory leak fix (Igor) # gpg: Signature made Tue 06 Nov 2018 21:34:30 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: util/qemu-thread-posix: Fix qemu_thread_atexit* for OSX include/qemu/thread.h: Document qemu_thread_atexit* API scsi-generic: do not do VPD emulation for sense other than ILLEGAL_REQUEST scsi-generic: avoid invalid access to struct when emulating block limits scsi-generic: avoid out-of-bounds access to VPD page list scsi-generic: keep VPD page list sorted lsi53c895a: check message length value is valid scripts/dump-guest-memory: Synchronize with guest_phys_blocks_region_add memory-mapping: skip non-volatile memory regions in GuestPhysBlockList nvdimm: set non-volatile on the memory region memory: learn about non-volatile memory region target/i386: Clear RF on SYSCALL instruction MAINTAINERS: remove or downgrade myself to reviewer from some subsystems ivshmem: fix memory backend leak i386: clarify that the Q35 machine type implements a P35 chipset x86: hv_evmcs CPU flag support icount: fix deadlock when all cpus are sleeping Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-06i386: clarify that the Q35 machine type implements a P35 chipsetDaniel P. Berrangé
The 'q35' machine type implements an Intel Series 3 chipset, of which there are several variants: https://www.intel.com/Assets/PDF/datasheet/316966.pdf The key difference between the 82P35 MCH ('p35', PCI device ID 0x29c0) and 82Q35 GMCH ('q35', PCI device ID 0x29b0) variants is that the latter has an integrated graphics adapter. QEMU does not implement integrated graphics, so uses the PCI ID for the 82P35 chipset, despite calling the machine type 'q35'. Thus we rename the PCI device ID constant to reflect reality, to avoid confusing future developers. The new name more closely matches what pci.ids reports it to be: $ grep P35 /usr/share/hwdata/pci.ids | grep 29 29c0 82G33/G31/P35/P31 Express DRAM Controller 29c1 82G33/G31/P35/P31 Express PCI Express Root Port 29c4 82G33/G31/P35/P31 Express MEI Controller 29c5 82G33/G31/P35/P31 Express MEI Controller 29c6 82G33/G31/P35/P31 Express PT IDER Controller 29c7 82G33/G31/P35/P31 Express Serial KT Controller $ grep Q35 /usr/share/hwdata/pci.ids | grep 29 29b0 82Q35 Express DRAM Controller 29b1 82Q35 Express PCI Express Root Port 29b2 82Q35 Express Integrated Graphics Controller 29b3 82Q35 Express Integrated Graphics Controller 29b4 82Q35 Express MEI Controller 29b5 82Q35 Express MEI Controller 29b6 82Q35 Express PT IDER Controller 29b7 82Q35 Express Serial KT Controller Arguably the QEMU machine type should be named 'p35'. At this point in time, however, it is not worth the churn for management applications & documentation to worry about renaming it. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20180830105757.10577-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-05hw/pci: Add missing includePhilippe Mathieu-Daudé
Noted while refactoring: CC mips-softmmu/hw/mips/gt64xxx_pci.o In file included from include/hw/pci-host/gt64xxx.h:2, from hw/mips/gt64xxx_pci.c:30: include/hw/pci/pci_bus.h:23:5: error: unknown type name ‘PCIIOMMUFunc’ PCIIOMMUFunc iommu_fn; ^~~~~~~~~~~~ include/hw/pci/pci_bus.h:27:5: error: unknown type name ‘pci_set_irq_fn’ pci_set_irq_fn set_irq; ^~~~~~~~~~~~~~ include/hw/pci/pci_bus.h:28:5: error: unknown type name ‘pci_map_irq_fn’ pci_map_irq_fn map_irq; ^~~~~~~~~~~~~~ include/hw/pci/pci_bus.h:29:5: error: unknown type name ‘pci_route_irq_fn’ pci_route_irq_fn route_intx_to_irq; ^~~~~~~~~~~~~~~~ include/hw/pci/pci_bus.h:31:24: error: ‘PCI_SLOT_MAX’ undeclared here (not in a function) PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX]; ^~~~~~~~~~~~ include/hw/pci/pci_bus.h:31:39: error: ‘PCI_FUNC_MAX’ undeclared here (not in a function) PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX]; ^~~~~~~~~~~~ make[1]: *** [rules.mak:69: hw/mips/gt64xxx_pci.o] Error 1 make: *** [Makefile:482: subdir-mips-softmmu] Error 2 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-25Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' ↵Peter Maydell
into staging ppc patch queue 2018-09-25 Here are the accumulated ppc target patches for the last several weeks. Highlights are: * A number of 40p / PReP cleanups * Preliminary irq rework on the pseries machine towards the new XIVE interrupt controller There are a few patches which make small changes to generic device and arm code as prerequisites to the 40p interrupt routing cleanup. They have acks from the relevant maintainers. # gpg: Signature made Tue 25 Sep 2018 08:00:06 BST # gpg: using RSA key 6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-3.1-20180925: 40p: add fixed IRQ routing for LSI SCSI device lsi53c895a: add optional external IRQ via qdev scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline() scsi: add lsi53c8xx_handle_legacy_cmdline() function sm501: Adjust endianness of pixel value in rectangle fill spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt spapr: increase the size of the IRQ number space spapr: introduce a spapr_irq class 'nr_msis' attribute 40p: use OR gate to wire up raven PCI interrupts raven: some minor IRQ-related tidy-ups hw/ppc: on 40p machine, change default firmware to OpenBIOS target/ppc/cpu-models: Re-group the 970 CPUs together again Record history of ppcemb target in common.json Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25scsi: remove unused lsi53c895a_create() and lsi53c810_create() functionsMark Cave-Ayland
Now that these functions are no longer required they can be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25scsi: add lsi53c8xx_handle_legacy_cmdline() functionMark Cave-Ayland
This is the function that will soon be used to replace lsi53c895a_create() and lsi53c810_create(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-07hw/pci: factor PCI reserve resources to a separate structureJing Liu
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve" and "pref64_reserve" fields of the "GenPCIERootPort" structure out to "PCIResReserve" structure, so that other PCI bridges can reuse it to add resource reserve capability. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23allocate pci id for mdpyGerd Hoffmann
mdpy is a sample pci device for vfio-mdev. Not (yet) merged upstream, patch available here: https://www.kraxel.org/cgit/linux/commit/?h=vfio-sample-display&id=6fd86cff3d7df38ab89625b16fdd6434b1c18749 Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20hw/pci: remove obsolete PCIDevice->init()Philippe Mathieu-Daudé
All PCI devices are now QOM'ified. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-18hw/ppc/prep: Fix implicit creation of "-drive if=scsi" devicesThomas Huth
The global hack for creating SCSI devices has recently been removed, but this apparently broke SCSI devices on some boards that were not ready for this change yet. For the 40p machine you now get: $ ppc64-softmmu/qemu-system-ppc64 -M 40p -cdrom x.iso qemu-system-ppc64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2 Fix it by providing a lsi53c810_create() function that takes care of calling scsi_bus_legacy_handle_cmdline() after creating the corresponding SCSI controller. Fixes: 1454509726719e0933c800fad00d6999752688ea Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-09pci: Add support for Designware IP blockAndrey Smirnov
Add code needed to get a functional PCI subsytem when using in conjunction with upstream Linux guest (4.13+). Tested to work against "e1000e" (network adapter, using MSI interrupts) as well as "usb-ehci" (USB controller, using legacy PCI interrupts). Based on "i.MX6 Applications Processor Reference Manual" (Document Number: IMX6DQRM Rev. 4) as well as corresponding dirver in Linux kernel (circa 4.13 - 4.16 found in drivers/pci/dwc/*) Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-19hw/rdma: Implementation of PVRDMA deviceYuval Shaia
PVRDMA is the QEMU implementation of VMware's paravirtualized RDMA device. It works with its Linux Kernel driver AS IS, no need for any special guest modifications. While it complies with the VMware device, it can also communicate with bare metal RDMA-enabled machines and does not require an RDMA HCA in the host, it can work with Soft-RoCE (rxe). It does not require the whole guest RAM to be pinned allowing memory over-commit and, even if not implemented yet, migration support will be possible with some HW assistance. Implementation is divided into 2 components, rdma general and pvRDMA specific functions and structures. The second PVRDMA sub-module - interaction with PCI layer. - Device configuration and setup (MSIX, BARs etc). - Setup of DSR (Device Shared Resources) - Setup of device ring. - Device management. Reviewed-by: Dotan Barak <dotanb@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-16ppc4xx: Add device models found in PPC440 core SoCsBALATON Zoltan
These devices are found in newer SoCs based on 440 core e.g. the 460EX (http://www.embeddeddeveloper.com/assets/processors/amcc/datasheets/ PP460EX_DS2063.pdf) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-13hw/pci-bridge: fix pcie root port's IO hints capabilityMarcel Apfelbaum
The gen_pcie_root_port mem-reserve and pref32-reserve properties are defined as size (so uint64_t), but passed as uint32_t when building the 'IO hints' vendor specific capability. Passing 4G (or more) gets truncated and passed as a zero reservation. Is not a huge issue since the guest firmware will always compare the hints with the default value and take the maximum. Fix it by passing the values as uint64_t and failing to init the gen_pcie_root_port id invalid values are used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-05pci: Eliminate pci_find_primary_bus()David Gibson
pci_find_primary_bus() only has one user, in pc_xen_hvm_init(). That's inside the machine construction code, so it already has easy access to the machine's primary PCI bus. Get it directly, and thereby remove pci_find_primary_bus(). This removes one of only a handful of users of the ugly pci_host_bridges global. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Add pci_dev_bus_num() helperDavid Gibson
A fair proportion of the users of pci_bus_num() want to get the bus number on a specific device, so first have to look up the bus from the device then call it. This adds a helper to do that (since we're going to make looking up the bus slightly more verbose). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Move bridge data structures from pci_bus.h to pci_bridge.hDavid Gibson
include/hw/pci/pci_bus.h contains several data structures related to PCI bridges that aren't needed by most users of pci_bus.h. We already have a pci_bridge.h, so move them there. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Rename root bus initialization functions for clarityDavid Gibson
pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus() are misleadingly named. They're not used for initializing *any* PCI bus, but only for a root PCI bus. Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead created with a direct qbus_create_inplace() (see pci_bridge_initfn()). This patch renames the functions to make it clear they're only used for a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-11-20Revert "Add new PCI ID for i82559a"Jason Wang
This reverts commit 5e89dc01133f8f5e621f6b66b356c6f37d31dafb since: - we should use ID in the spec instead the one used by OEM - in the future, we should allow changing id through either property or EEPROM file. Cc: Stefan Weil <sw@weilnetz.de> Cc: Michael Nawrocki <michael.nawrocki@gtri.gatech.edu> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13Add new PCI ID for i82559aMike Nawrocki
Adds a new PCI ID for the i82559a (0x8086 0x1030) interface. The "x-use-alt-device-id" property controls whether this new ID is to be used, and is true by default, and set to false in a compat entry. Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-05pci-assign: RemovePaolo Bonzini
Legacy PCI device assignment has been removed from Linux in 4.12, and had been deprecated 2 years ago there. We can remove it from QEMU as well. The ROM loading code was shared with Xen PCI passthrough, so move it to hw/xen. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-15pci: conventional-pci-device and pci-express-device interfacesEduardo Habkost
Those two interfaces will be used to indicate which device types support Conventional PCI or PCI Express buses. Management software will be able to use the qom-list-types QMP command to query that information. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-21net: add Sun HME (Happy Meal Ethernet) on-board NICMark Cave-Ayland
Enable it by default for the sparc64-softmmu configuration. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-09-15net: Add SunGEM device emulation as found on Apple UniNorthBenjamin Herrenschmidt
This adds a simplistic emulation of the Sun GEM ethernet controller found in Apple ASICs. Currently we only support the Apple UniNorth 1.x variant, but the other Apple or Sun variants should mostly be a matter of adding PCI IDs options. We have a very primitive emulation of a single Broadcom 5201 PHY which is supported by the MacOS driver. This model brings out-of-the-box networking to MacOS 9, and all versions of OS X I tried with the mac99 platform. Further improvements from Mark: - Remove sungem.h file, moving constants into sungem.c as required - Switch to using tracepoints for debugging - Split register blocks into separate memory regions - Use arrays in SunGEMState to hold register values - Add state-saving support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08pci: add reserved slot check to do_pci_register_device()Mark Cave-Ayland
Add a new slot_reserved_mask bitmask to PCIBus indicating whether or not each PCI slot on the bus is reserved. Ensure that it is initialised to zero to maintain the existing behaviour that all slots are available by default, and add the additional check with appropriate error reporting to do_pci_register_device(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root PortAleksandr Bezzubikov
To enable hotplugging of a newly created pcie-pci-bridge, we need to tell firmware (e.g. SeaBIOS) to reserve additional buses or IO/MEM/PREF space for pcie-root-port. Additional bus reservation allows us to hotplug pcie-pci-bridge into this root port. The number of buses and IO/MEM/PREF space to reserve are provided to the device via a corresponding property, and to the firmware via new PCI capability. The properties' default values are -1 to keep default behavior unchanged. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: introduce bridge-only vendor-specific capability to provide some ↵Aleksandr Bezzubikov
hints to firmware On PCI init PCI bridges may need some extra info about bus number, IO, memory and prefetchable memory to reserve. QEMU can provide this with a special vendor-specific PCI capability. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: introduce pcie-pci-bridge deviceAleksandr Bezzubikov
Introduce a new PCIExpress-to-PCI Bridge device, which is a hot-pluggable PCI Express device and supports devices hot-plug with SHPC. This device is intended to replace the DMI-to-PCI Bridge. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-30kvm: remove hard dependency on pciCornelia Huck
The msi routing code in kvm calls some pci functions: provide some stubs to enable builds without pci. Also, to make this more obvious, guard them via a pci_available boolean (which also can be reused in other places). Fixes: e1d4fb2de ("kvm-irqchip: x86: add msi route notify fn") Fixes: 767a554a0 ("kvm-all: Pass requester ID to MSI routing functions") Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-03pci: Convert shpc_init() to ErrorMao Zhongyi
In order to propagate error message better, convert shpc_init() to Error also convert the pci_bridge_dev_initfn() to realize. Cc: mst@redhat.com Cc: marcel@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Convert to realizeMao Zhongyi
Convert i82801b11, io3130_upstream, io3130_downstream and pcie_root_port devices to realize. Cc: mst@redhat.com Cc: marcel@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Replace pci_add_capability2() with pci_add_capability()Mao Zhongyi
After the patch 'Make errp the last parameter of pci_add_capability()', pci_add_capability() and pci_add_capability2() now do exactly the same. So drop the wrapper pci_add_capability() of pci_add_capability2(), then replace the pci_add_capability2() with pci_add_capability() everywhere. Cc: pbonzini@redhat.com Cc: rth@twiddle.net Cc: ehabkost@redhat.com Cc: mst@redhat.com Cc: dmitry@daynix.com Cc: jasowang@redhat.com Cc: marcel@redhat.com Cc: alex.williamson@redhat.com Cc: armbru@redhat.com Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Make errp the last parameter of pci_add_capability()Mao Zhongyi
Add Error argument for pci_add_capability() to leverage the errp to pass info on errors. This way is helpful for its callers to make a better error handling when moving to 'realize'. Cc: pbonzini@redhat.com Cc: rth@twiddle.net Cc: ehabkost@redhat.com Cc: mst@redhat.com Cc: jasowang@redhat.com Cc: marcel@redhat.com Cc: alex.williamson@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-06-01migration: Remove unneeded includes of migration/vmstate.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-08pci: Reduce scope of error injectionEric Blake
No one outside of pcie_aer.h was using error injection; mark them static for internal use. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-3-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24sm501: Add emulation of chip connected via PCIBALATON Zoltan
Only the display controller part is created automatically on PCI Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-16hw/virtio: fix Power Management Control Register for PCI Express virtio devicesMarcel Apfelbaum
Make Power Management State flag writable to conform with the PCI Express spec. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 08:07:43 +0000