aboutsummaryrefslogtreecommitdiff
path: root/include/hw/misc
AgeCommit message (Collapse)Author
2021-07-11Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into stagingPeter Maydell
Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to a sensor directory, since with new BMCs coming in lots of different sensors should be coming in. Keep from cluttering things up. Add support for I2C PMBus devices. Replace the confusing and error-prone i2c_send_recv and i2c_transfer with specific send and receive functions. Several errors have already been made with these, avoid any new errors. Fix the watchdog_expired field in the IPMI watchdog, it's not a bool, it's a u8. After a vmstate transfer, the new value could be wrong. # gpg: Signature made Fri 09 Jul 2021 17:25:04 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-2: (24 commits) tests/qtest: add tests for MAX34451 device model hw/misc: add MAX34451 device tests/qtest: add tests for ADM1272 device model hw/misc: add ADM1272 device hw/i2c: add support for PMBus ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct hw/i2c: Introduce i2c_start_recv() and i2c_start_send() hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer() hw/i2c: Make i2c_start_transfer() direction argument a boolean hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address() hw/i2c: Remove confusing i2c_send_recv() hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/misc/auxbus: Replace 'is_write' boolean by its value hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases hw/misc/auxbus: Fix MOT/classic I2C mode hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/i2c/ppc4xx_i2c: Add reference to datasheet hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/display/sm501: Simplify sm501_i2c_write() logic hw/input/lm832x: Define TYPE_LM8323 in public header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-02hw/arm: Add basic power management to raspi.Nolan Leake
This is just enough to make reboot and poweroff work. Works for linux, u-boot, and the arm trusted firmware. Not tested, but should work for plan9, and bare-metal/hobby OSes, since they seem to generally do what linux does for reset. The watchdog timer functionality is not yet implemented. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/64 Signed-off-by: Nolan Leake <nolan@sigbus.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210625210209.1870217-1-nolan@sigbus.net [PMM: tweaked commit title; fixed region size to 0x200; moved header file to include/] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-17sensor: Move hardware sensors from misc to a sensor directoryCorey Minyard
Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-06-17adc: Move the max111x driver to the adc directoryCorey Minyard
It's an adc, put it where it belongs. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-17adc: Move the zynq-xadc file to the adc directoriesCorey Minyard
It's an ADC, put it where it belongs. Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-05-10hw/misc/mps2-scc: Support using CFG0 bit 0 for remappingPeter Maydell
On some boards, SCC config register CFG0 bit 0 controls whether parts of the board memory map are remapped. Support this with: * a device property scc-cfg0 so the board can specify the initial value of the CFG0 register * an outbound GPIO line which tracks bit 0 and which the board can wire up to provide the remapping Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210504120912.23094-3-peter.maydell@linaro.org
2021-05-10hw/misc/mps2-scc: Add "QEMU interface" commentPeter Maydell
The MPS2 SCC device doesn't have any documentation of its properties; add a "QEMU interface" format comment describing them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210504120912.23094-2-peter.maydell@linaro.org
2021-05-05Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Trivial patches pull request 20210503 # gpg: Signature made Mon 03 May 2021 09:34:56 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits) hw/rx/rx-gdbsim: Do not accept invalid memory size docs: More precisely describe memory-backend-*::id's user scripts: fix generation update-binfmts templates docs/system: Document the removal of "compat" property for POWER CPUs mc146818rtc: put it into the 'misc' category Do not include exec/address-spaces.h if it's not really necessary Do not include cpu.h if it's not really necessary Do not include hw/boards.h if it's not really necessary Do not include sysemu/sysemu.h if it's not really necessary hw: Do not include qemu/log.h if it is not necessary hw: Do not include hw/irq.h if it is not necessary hw: Do not include hw/sysbus.h if it is not necessary hw: Remove superfluous includes of hw/hw.h ui: Fix memory leak in qemu_xkeymap_mapping_table() hw/usb: Constify VMStateDescription hw/display/qxl: Constify VMStateDescription hw/arm: Constify VMStateDescription vmstate: Constify some VMStateDescriptions Fix typo in CFI build documentation hw/pcmcia: Do not register PCMCIA type if not required ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-02hw: Remove superfluous includes of hw/hw.hThomas Huth
The include/hw/hw.h header only has a prototype for hw_error(), so it does not make sense to include this in files that do not use this function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210326151848.2217216-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-01hw/misc/aspeed_xdma: Add AST2600 supportCédric Le Goater
When we introduced support for the AST2600 SoC, the XDMA controller was forgotten. It went unnoticed because it's not used under emulation. But the register layout being different, the reset procedure is bogus and this breaks kexec. Add a AspeedXDMAClass to take into account the register differences. Cc: Eddie James <eajames@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Eddie James <eajames@linux.ibm.com> Message-Id: <20210407171637.777743-14-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01hw: Model ASPEED's Hash and Crypto EngineJoel Stanley
The HACE (Hash and Crypto Engine) is a device that offloads MD5, SHA1, SHA2, RSA and other cryptographic algorithms. This initial model implements a subset of the device's functionality; currently only MD5/SHA hashing, and on the ast2600's scatter gather engine. Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> [ clg: - fixes for 32-bit and OSX builds ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210409000253.1475587-2-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18Merge remote-tracking branch 'remotes/vivier/tags/q800-for-6.0-pull-request' ↵Peter Maydell
into staging q800 pull request 20210316 Several fixes for mac_via needed for future support of MacOS ROM # gpg: Signature made Tue 16 Mar 2021 21:14:42 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-for-6.0-pull-request: mac_via: remove VIA1 timer optimisations mac_via: fix 60Hz VIA1 timer interval mac_via: rename VBL timer to 60Hz timer mac_via: don't re-inject ADB response when switching to IDLE state mac_via: allow long accesses to VIA registers mac_via: fix up adb_via_receive() trace events mac_via: switch rtc pram trace-events to use hex rather than decimal for addresses Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16mac_via: rename VBL timer to 60Hz timerMark Cave-Ayland
According to the "Guide To The Macintosh Family Hardware", the 60Hz VIA1 timer on newer Macs such as the Quadra only exists for compatibility with old software and is no longer synced to the VBL interval. Rename the VBL timer to 60Hz timer to emphasise this and to prevent confusion when the real VBL interrupt (now handled as a NuBus slot interrupt) is added in future. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20210311100505.22596-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-15m68k: add a system controllerLaurent Vivier
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
2021-03-15hw/misc/led: Add yellow LEDPhilippe Mathieu-Daudé
Add the yellow "lime" LED. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com> Message-Id: <20210313165445.2113938-2-f4bug@amsat.org>
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add GPIOs for duty in NPCM7xx PWMHao Wu
This patch adds GPIOs in NPCM7xx PWM module for its duty values. The purpose of this is to connect it to the MFT module to provide an input for measuring a PWM fan's RPM. Each PWM module has NPCM7XX_PWM_PER_MODULE of GPIOs, each one corresponds to one PWM instance and can connect to multiple fan instances in MFT. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: versal: Add a model of the XRAM controllerEdgar E. Iglesias
Add a model of the Xilinx Versal Accelerator RAM (XRAM). This is mainly a stub to make firmware happy. The size of the RAMs can be probed. The interrupt mask logic is modelled but none of the interrups will ever be raised unless injected. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' ↵Peter Maydell
into staging Aspeed patches : * New model for the Aspeed LPC controller * Misc cleanups # gpg: Signature made Tue 09 Mar 2021 11:54:25 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210309: hw/misc: Model KCS devices in the Aspeed LPC controller hw/misc: Add a basic Aspeed LPC controller model hw/arm: ast2600: Correct the iBT interrupt ID hw/arm: ast2600: Set AST2600_MAX_IRQ to value from datasheet hw/arm: ast2600: Force a multiple of 32 of IRQs for the GIC hw/arm/aspeed: Fix location of firmware images in documentation arm/ast2600: Fix SMP booting with -kernel Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09hw/misc: Model KCS devices in the Aspeed LPC controllerAndrew Jeffery
Keyboard-Controller-Style devices for IPMI purposes are exposed via LPC IO cycles from the BMC to the host. Expose support on the BMC side by implementing the usual MMIO behaviours, and expose the ability to inspect the KCS registers in "host" style by accessing QOM properties associated with each register. The model caters to the IRQ style of both the AST2600 and the earlier SoCs (AST2400 and AST2500). The AST2600 allocates an IRQ for each LPC sub-device, while there is a single IRQ shared across all subdevices on the AST2400 and AST2500. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210302014317.915120-6-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09hw/misc: Add a basic Aspeed LPC controller modelCédric Le Goater
This is a very minimal framework to access registers which are used to configure the AHB memory mapping of the flash chips on the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20210302014317.915120-5-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-08hw/misc/mps2-fpgaio: Support AN547 DBGCTRL registerPeter Maydell
For the AN547 image, the FPGAIO block has an extra DBGCTRL register, which is used to control the SPNIDEN, SPIDEN, NPIDEN and DBGEN inputs to the CPU. These signals control when the CPU permits use of the external debug interface. Our CPU models don't implement the external debug interface, so we model the register as reads-as-written. Implement the register, with a property defining whether it is present, and allow mps2-tz boards to specify that it is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-39-peter.maydell@linaro.org
2021-03-08hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register blockPeter Maydell
The SSE-300 has a new register block CPU<N>_PWRCTRL. There is one instance of this per CPU in the system (so just one for the SSE-300), and as well as the usual CIDR/PIDR ID registers it has just one register, CPUPWRCFG. This register allows the guest to configure behaviour of the system in power-down and deep-sleep states. Since QEMU does not model those, we make the register a dummy reads-as-written implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-21-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Handle SSE-300 changes to PDCM_PD_*_SENSE registersPeter Maydell
The sysctl PDCM_PD_*_SENSE registers control various power domains in the system and allow the guest to configure which conditions keep a power domain awake and what power state to use when the domain is in a low power state. QEMU doesn't model power domains, so for us these registers are dummy reads-as-written implementations. The SSE-300 has a different power domain setup, so the set of registers is slightly different: Offset SSE-200 SSE-300 --------------------------------------------------- 0x200 PDCM_PD_SYS_SENSE PDCM_PD_SYS_SENSE 0x204 reserved PDCM_PD_CPU0_SENSE 0x208 reserved reserved 0x20c PDCM_PD_SRAM0_SENSE reserved 0x210 PDCM_PD_SRAM1_SENSE reserved 0x214 PDCM_PD_SRAM2_SENSE PDCM_PD_VMR0_SENSE 0x218 PDCM_PD_SRAM3_SENSE PDCM_PD_VMR1_SENSE Offsets 0x200 and 0x208 are the same for both, so handled in a previous commit; here we deal with 0x204, 0x20c, 0x210, 0x214, 0x218. (We can safely add new lines to the SSE300 vmstate because no board uses this device in an SSE300 yet.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-18-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Implement dummy version of SSE-300 PWRCTRL registerPeter Maydell
The SSE-300 has a new PWRCTRL register at offset 0x1fc (previously reserved). This register controls accessibility of some registers in the Power Policy Units (PPUs). Since QEMU doesn't implement the PPUs, we don't need to implement any real behaviour for this register, so we just handle the UNLOCK bit which controls whether writes to the register itself are permitted and otherwise make it be reads-as-written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-17-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysinfo.c: Implement SYS_CONFIG1 and IIDRPeter Maydell
For SSE-300, the SYSINFO register block has two new registers: * SYS_CONFIG1 indicates the config for a potential CPU2 and CPU3; since the SSE-300 can only be configured with a single CPU it is always zero * IIDR is the subsystem implementation identity register; its value is set by the SoC integrator, so we plumb this in from the armsse.c code as we do with SYS_VERSION and SYS_CONFIG Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-11-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysinfo.c: Implement SSE-300 PID register valuesPeter Maydell
The version of the SYSINFO Register Block in the SSE-300 has different CIDR/PIDR register values to the SSE-200; pass in the sse-version property and use it to select the correct ID register values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-9-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-secctl.c: Implement SSE-300 PID register valuesPeter Maydell
The versions of the Secure Access Configuration Register Block and Non-secure Access Configuration Register Block in the SSE-300 are the same as those in the SSE-200, but the CIDR/PIDR ID register values are different. Plumb through the sse-version property and use it to select the correct ID register values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-8-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Remove is_sse200 flagPeter Maydell
Remove the is_sse200 flag in favour of just directly testing the new sse_version field. Since some of these registers exist in the SSE-300 but some do not or have different behaviour, we expand out the if() statements in the read and write functions into switch()es, so we have an easy place to put SSE-300 specific behaviour. (Until we do add the SSE-300 behaviour, the thing preventing us reaching the "unreachable" default cases is that armsse.c doesn't yet pass us an ARMSSE_SSE300 version.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-7-peter.maydell@linaro.org
2021-03-08hw/arm/armsse: Introduce SSE subsystem version propertyPeter Maydell
We model Arm "Subsystems for Embedded" SoC subsystems using generic code which is split into various sub-devices which are configurable by QOM properties to handle the behaviour differences between the SSE subsystems we implement. Currently the only sub-device which needs to change is the IOTKIT_SYSCTL device, and we do this with a mix of properties that directly specify divergent behaviours (eg CPUWAIT_RST) and passing it the SYS_VERSION register value as a way for it to distinguish IoTKit from SSE-200. The "pass SYS_VERSION" approach is already a bit hacky, since the IOTKIT_SYSCTL device has to know that the different part of the register value happens to be bits [31:28]. For SSE-300 this register is renamed SOC_IDENTITY and has a different format entirely, all of whose fields can be configured by the SoC integrator when they integrate the SSE into their SoC, and so "pass SYS_VERSION" breaks down completely. Switch to using a simple integer property representing an internal-to-QEMU enumeration of the SSE flavour. For the moment we only need this in IOTKIT_SYSCTL, but as we add SSE-300 support a few of the other devices will also need to know. We define and permit a value for the SSE-300 so we can start using it in subsequent commits which add SSE-300 support. The now-redundant is_sse200 flag in IoTKitSysCtl will be removed in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-6-peter.maydell@linaro.org
2021-03-08hw/arm/mps2: Update old infocenter.arm.com URLsPeter Maydell
Update old infocenter.arm.com URLs to the equivalent developer.arm.com ones (the old URLs should redirect, but we might as well avoid the redirection notice, and the new URLs are pleasantly shorter). This commit covers the links to the MPS2 board TRM, the various Application Notes, the IoTKit and SSE-200 documents. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-25-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524Peter Maydell
The AN524 version of the SCC interface has different behaviour for some of the CFG registers; implement it. Each board in this family can have minor differences in the meaning of the CFG registers, so rather than trying to specify all the possible semantics via individual device properties, we make the behaviour conditional on the part-number field of the SCC_ID register which the board code already passes us. For the AN524, the differences are: * CFG3 is reserved rather than being board switches * CFG5 is a new register ("ACLK Frequency in Hz") * CFG6 is a new register ("Clock divider for BRAM") We implement both of the new registers as reads-as-written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-11-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-fpgaio: Support SWITCH registerPeter Maydell
MPS3 boards have an extra SWITCH register in the FPGAIO block which reports the value of some switches. Implement this, governed by a property the board code can use to specify whether whether it exists. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-7-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-fpgaio: Make number of LEDs configurable by boardPeter Maydell
The MPS2 board has 2 LEDs, but the MPS3 board has 10 LEDs. The FPGAIO device is similar on both sets of boards, but the LED0 register has correspondingly more bits that have an effect. Add a device property for number of LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-6-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-scc: Support configurable number of OSCCLK valuesPeter Maydell
Currently the MPS2 SCC device implements a fixed number of OSCCLK values (3). The variant of this device in the MPS3 AN524 board has 6 OSCCLK values. Switch to using a PROP_ARRAY, which allows board code to specify how large the OSCCLK array should be as well as its values. With a variable-length property array, the SCC no longer specifies default values for the OSCCLKs, so we must set them explicitly in the board code. This defaults are actually incorrect for the an521 and an505; we will correct this bug in a following patch. This is a migration compatibility break for all the mps boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-3-peter.maydell@linaro.org
2021-02-20Fix SPDX-License-Identifier typosRyan Finnie
Several SPDX headers contain "SPDX-License-Identifer" (note the missing "i" before "er"); fix these typos. Signed-off-by: Ryan Finnie <ryan@finnie.org> Cc: qemu-trivial@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210201200147.211914-1-ryan@finnie.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-11arm: Update infocenter.arm.com URLsPeter Maydell
Update infocenter.arm.com URLs for various pieces of Arm documentation to the new developer.arm.com equivalents. (There is a redirection in place from the old URLs, but we might as well update our comments in case the redirect ever disappears in future.) This patch covers all the URLs which are not MPS2/SSE-200/IoTKit related (those are dealt with in a different patch). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210205171456.19939-1-peter.maydell@linaro.org
2021-01-29hw/misc/pvpanic: add PCI interface supportMihai Carabas
Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-29hw/misc/pvpanic: split-out generic and bus dependent codeMihai Carabas
To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-13macio: wire macio GPIOs to OpenPIC using sysbus IRQsMark Cave-Ayland
This both allows the wiring to be done as Ben suggested in his original comment in gpio.c and also enables the OpenPIC object property link to be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20201229175619.6051-7-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-01-13macio: move OpenPIC inside macio-newworld deviceMark Cave-Ayland
The OpenPIC device is located within the macio device on real hardware so make it a child of the macio-newworld device. This also removes the need for setting and checking a separate PIC object property link on the macio-newworld device which currently causes the automated QOM introspection tests to fail. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20201229175619.6051-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-01-13macio: move heathrow PIC inside macio-oldworld deviceMark Cave-Ayland
The heathrow PIC is located within the macio device on real hardware so make it a child of the macio-oldworld device. This also removes the need for setting and checking a separate PIC object property link on the macio-oldworld device which currently causes the automated QOM introspection tests to fail. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20201229175619.6051-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-01-12hw/misc: Add a PWM module for NPCM7XXHao Wu
The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12hw/timer: Refactor NPCM7XX Timer to use CLK clockHao Wu
This patch makes NPCM7XX Timer to use a the timer clock generated by the CLK module instead of the magic number TIMER_REF_HZ. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12hw/misc: Add clock converter in NPCM7XX CLK moduleHao Wu
This patch allows NPCM7XX CLK module to compute clocks that are used by other NPCM7XX modules. Add a new struct NPCM7xxClockConverterState which represents a single converter. Each clock converter in CLK module represents one converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter takes one or more input clocks and converts them into one output clock. They form a clock hierarchy in the CLK module and are responsible for outputing clocks for various other modules in an NPCM7XX SoC. Each converter has a function pointer called "convert" which represents the unique logic for that converter. The clock contains two initialization information: ConverterInitInfo and ConverterConnectionInfo. They represent the vertices and edges in the clock diagram respectively. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108190945.949196-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-10hw/ssi: Rename SSI 'slave' as 'peripheral'Philippe Mathieu-Daudé
In order to use inclusive terminology, rename SSI 'slave' as 'peripheral', following the specification resolution: https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/ Patch created mechanically using: $ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave) $ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE) $ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave) $ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave) $ sed -i s/ssi_create_slave/ssi_create_peripheral/ \ $(git grep -l ssi_create_slave) Then in VMStateDescription vmstate_ssi_peripheral we restored the "SSISlave" migration stream name (to avoid breaking migration). Finally the following files have been manually tweaked: - hw/ssi/pl022.c - hw/ssi/xilinx_spips.c Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012124955.3409127-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10hw/misc: add an EMC141{3,4} device modelJohn Wang
Largely inspired by the TMP421 temperature sensor, here is a model for the EMC1413/EMC1414 temperature sensors. Specs can be found here : http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-11-10hw/misc/stm32f2xx_syscfg: Remove extraneous IRQPhilippe Mathieu-Daudé
The system configuration controller (SYSCFG) doesn't have any output IRQ (and the INTC input #71 belongs to the UART6). Remove the invalid code. Fixes: db635521a02 ("stm32f205: Add the stm32f205 SoC") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201107193403.436146-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-04Merge remote-tracking branch ↵Peter Maydell
'remotes/philmd-gitlab/tags/mips-fixes-20201103' into staging MIPS patches queue - Removal of the 'r4k' machine (deprecated before 5.0) - Fix LGPL license text (Chetan Pant) - Support unaligned accesses on Loongson-3 (Huacai Chen) - Fix out-of-bound access in Loongson-3 embedded I/O interrupt controller (Alex Chen) CI jobs results: . https://cirrus-ci.com/build/6324890389184512 . https://gitlab.com/philmd/qemu/-/pipelines/211275262 . https://travis-ci.org/github/philmd/qemu/builds/741188958 # gpg: Signature made Tue 03 Nov 2020 17:30:30 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/mips-fixes-20201103: target/mips: Add unaligned access support for MIPS64R6 and Loongson-3 target/mips: Fix Lesser GPL version number hw/intc/loongson: Fix incorrect 'core' calculation in liointc_read/write hw/mips/boston: Fix Lesser GPL version number hw/mips: Fix Lesser GPL version number hw/mips: Remove the 'r4k' machine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-13 08:52:53 +0000