aboutsummaryrefslogtreecommitdiff
path: root/include/hw/loongarch
AgeCommit message (Collapse)Author
2024-02-29loongarch: Change the UEFI loading mode to loongarchXianglai Li
The UEFI loading mode in loongarch is very different from that in other architectures:loongarch's UEFI code is in rom, while other architectures' UEFI code is in flash. loongarch UEFI can be loaded as follows: -machine virt,pflash=pflash0-format -bios ./QEMU_EFI.fd Other architectures load UEFI using the following methods: -machine virt,pflash0=pflash0-format,pflash1=pflash1-format loongarch's UEFI loading method makes qemu and libvirt incompatible when using NVRAM, and the cost of loongarch's current loading method far outweighs the benefits, so we decided to use the same UEFI loading scheme as other architectures. Cc: Andrea Bolognani <abologna@redhat.com> Cc: maobibo@loongson.cn Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Song Gao <gaosong@loongson.cn> Cc: zhaotianrui@loongson.cn Signed-off-by: Xianglai Li <lixianglai@loongson.cn> Tested-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2024-01-11hw/loongarch/virt: Set iocsr address space per-board rather than percpuBibo Mao
LoongArch system has iocsr address space, most iocsr registers are per-board, however some iocsr register spaces banked for percpu such as ipi mailbox and extioi interrupt status. For banked iocsr space, each cpu has the same iocsr space, but separate data. This patch changes iocsr address space per-board rather percpu, for iocsr registers specified for cpu, MemTxAttrs.requester_id can be parsed for the cpu. With this patches, the total address space on board will be simple, only iocsr address space and system memory, rather than the number of cpu and system memory. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20231215100333.3933632-3-maobibo@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-12-21hw/loongarch/virt: Align high memory base address with super page sizeBibo Mao
With LoongArch virt machine, there is low memory space with region 0--0x10000000, and high memory space with started from 0x90000000. High memory space is aligned with 256M, it will be better if it is aligned with 1G, which is super page aligned for 4K page size. Currently linux kernel and uefi bios has no limitation with high memory base address, it is ok to set high memory base address with 0x80000000. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20231127040231.4123715-1-maobibo@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-10-13hw/loongarch/virt: Remove unused ISA BusPhilippe Mathieu-Daudé
The LoongArch 'virt' machine doesn't use its ISA I/O region. If a ISA device were to be mapped there, there is no support for ISA IRQ. Unlikely useful. Simply remove. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20231010135342.40219-3-philmd@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-05-15hw/loongarch/virt: Set max 256 cpus support on loongarch virt machineSong Gao
Add separate macro EXTIOI_CPUS for extioi interrupt controller, extioi only supports 4 cpu. And set macro LOONGARCH_MAX_CPUS as 256 so that loongarch virt machine supports more cpus. Interrupts from external devices can only be routed cpu 0-3 because of extioi limits, cpu internal interrupt such as timer/ipi can be triggered on all cpus. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230512100421.1867848-3-gaosong@loongson.cn>
2023-05-15hw/loongarch/virt: Modify ipi as percpu deviceSong Gao
ipi is used to communicate between cpus, this patch modified loongarch ipi device as percpu device, so that there are 2 MemoryRegions with ipi device, rather than 2*cpus MemoryRegions, which may be large than QDEV_MAX_MMIO if more cpus are added on loongarch virt machine. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230512100421.1867848-2-gaosong@loongson.cn>
2023-03-03hw/loongarch/virt: add system_powerdown hmp command supportSong Gao
For loongarch virt machine, add powerdown notification callback and send ACPI_POWER_DOWN_STATUS event by acpi ged. Also add acpi dsdt table for ACPI_POWER_BUTTON_DEVICE device in this patch. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230303010548.295580-1-gaosong@loongson.cn>
2022-12-15hw/loongarch/virt: Add cfi01 pflash deviceXiaojuan Yang
Add cfi01 pflash device for LoongArch virt machine Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221130100647.398565-1-yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2022-12-05Revert "hw/loongarch/virt: Add cfi01 pflash device"Song Gao
This reverts commit 14dccc8ea6ece7ee63273144fb55e4770a05e0fd. Signed-off-by: Song Gao <gaosong@loongson.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20221205113007.683505-1-gaosong@loongson.cn>
2022-12-02hw/loongarch/virt: Add cfi01 pflash deviceXiaojuan Yang
Add cfi01 pflash device for LoongArch virt machine Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221130100647.398565-1-yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2022-11-04hw/loongarch: Load FDT table into dram memory spaceXiaojuan Yang
Load FDT table into dram memory space, and the addr is 2 MiB. Since lowmem region starts from 0, FDT base address is located at 2 MiB to avoid NULL pointer access. Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Acked-by: Song Gao <gaosong@loongson.cn> Message-Id: <20221028014007.2718352-2-yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2022-09-20hw/loongarch: Improve acpi dsdt tableXiaojuan Yang
Cleanup the previous pci information in acpi dsdt table. And using the common acpi_dsdt_add_gpex function to build the gpex and pci information. Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Acked-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220908094623.73051-10-yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2022-09-20hw/loongarch: Add platform bus supportXiaojuan Yang
Add platform bus support and add the bus information such as address, size, irq number to FDT table. Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Acked-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220908094623.73051-5-yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2022-07-29hw/loongarch: Change macro name 'LS7A_XXX' to 'VIRT_XXX'Xiaojuan Yang
Change macro name 'LS7A_XXX' to 'VIRT_XXX', as the loongarch virt machinue use the GPEX bridge instead of LS7A bridge. So the macro name should keep consistency. Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Message-Id: <20220729073018.27037-3-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19hw/loongarch: Add fdt supportXiaojuan Yang
Add LoongArch flatted device tree, adding cpu device node, firmware cfg node, pcie node into it, and create fdt rom memory region. Now fdt info is not full since only uefi bios uses fdt, linux kernel does not use fdt. Loongarch Linux kernel uses acpi table which is full in qemu virt machine. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn> [rth: Set TARGET_NEED_FDT, add fdt to meson.build] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19hw/loongarch: Add acpi ged supportXiaojuan Yang
Loongarch virt machine uses general hardware reduces acpi method, rather than LS7A acpi device. Now only power management function is used in acpi ged device, memory hotplug will be added later. Also acpi tables such as RSDP/RSDT/FADT etc. The acpi table has submited to acpi spec, and will release soon. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Message-Id: <20220712083206.4187715-6-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19hw/loongarch: Add smbios supportXiaojuan Yang
Add smbios support for loongarch virt machine, and put them into fw_cfg table so that bios can parse them quickly. The weblink of smbios spec: https://www.dmtf.org/dsp/DSP0134, the version is 3.6.0. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Message-Id: <20220712083206.4187715-5-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19hw/loongarch: Add uefi bios loading supportXiaojuan Yang
Add uefi bios loading support, now only uefi bios is porting to loongarch virt machine. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Message-Id: <20220712083206.4187715-3-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19hw/loongarch: Add fw_cfg table supportXiaojuan Yang
Add fw_cfg table for loongarch virt machine, including memmap table. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Message-Id: <20220712083206.4187715-2-yangxiaojuan@loongson.cn> [rth: Replace fprintf with assert; drop unused return value; initialize reserved slot to zero.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06hw/loongarch: Add LoongArch ipi interrupt support(IPI)Xiaojuan Yang
This patch realize the IPI interrupt controller. Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220606124333.2060567-32-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06hw/loongarch: Add support loongson3 virt machine type.Xiaojuan Yang
Emulate a 3A5000 board use the new loongarch instruction. 3A5000 belongs to the Loongson3 series processors. The board consists of a 3A5000 cpu model and the virt bridge. The host 3A5000 board is really complicated and contains many functions.Now for the tcg softmmu mode only part functions are emulated. More detailed info you can see https://github.com/loongson/LoongArch-Documentation Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>