aboutsummaryrefslogtreecommitdiff
path: root/include/hw/i386
AgeCommit message (Collapse)Author
2016-07-14Add optionrom compatible with fw_cfg DMA versionMarc Marí
This optionrom is based on linuxboot.S. Signed-off-by: Marc Marí <markmb@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com> [Add -fno-toplevel-reorder, support clang without -m16. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-12Clean up decorations and whitespace around header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, pci, virtio: new features, cleanups, fixes iommus can not be added with -device. cleanups and fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 05 Jul 2016 11:18:32 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (30 commits) vmw_pvscsi: remove unnecessary internal msi state flag e1000e: remove unnecessary internal msi state flag vmxnet3: remove unnecessary internal msi state flag mptsas: remove unnecessary internal msi state flag megasas: remove unnecessary megasas_use_msi() pci: Convert msi_init() to Error and fix callers to check it pci bridge dev: change msi property type megasas: change msi/msix property type mptsas: change msi property type intel-hda: change msi property type usb xhci: change msi/msix property type change pvscsi_init_msi() type to void tests: add APIC.cphp and DSDT.cphp blobs tests: acpi: add CPU hotplug testcase log: Permit -dfilter 0..0xffffffffffffffff range: Replace internal representation of Range range: Eliminate direct Range member access log: Clean up misuse of Range for -dfilter pci_register_bar: cleanup Revert "virtio-net: unbreak self announcement and guest offloads after migration" ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-05Merge remote-tracking branch 'remotes/kraxel/tags/pull-ipxe-20160704-1' into ↵Peter Maydell
staging ipxe: update submodule from 4e03af8ec to 041863191 e1000e+vmxnet3: add boot rom # gpg: Signature made Mon 04 Jul 2016 07:25:46 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-ipxe-20160704-1: build: add pc-bios to config-host.mak deps ipxe: add new roms to BLOBS ipxe: update prebuilt binaries vmxnet3: add boot rom e1000e: add boot rom ipxe: add vmxnet3 rom ipxe: add e1000e rom ipxe: update submodule from 4e03af8ec to 041863191 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-04pc: Eliminate PcPciInfoMarkus Armbruster
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and w64 is the PCI64 hole. Three users: * I440FXState and MCHPCIState have a member PcPciInfo pci_info, but only pci_info.w32 is actually used. This is confusing. Replace by Range pci_hole. * acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes from acpi_get_pci_info() to build_dsdt(). Replace by two variables Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to acpi_get_pci_holes(). PcPciInfo is now unused; drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-29ich9: implement SCI_IRQ_SEL registerPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 LPC: handle GSI as qdev GPIOEfimov Vasily
The ICH9 LPC bridge has 24 output IRQs connected to GSI. Currently the IRQs are referenced by pointers. The pointers are initialized at startup by direct access to the structure fields. This violates Qemu device model. The patch makes the IRQs handling to use GPIO model. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: unify pic and ioapic IRQ vectorsPaolo Bonzini
ich9->pic and ich9->ioapic differ for the first 16 GSIs (because ich9->pic is wired to 8259+IOAPIC but ich9->ioapic is wired to IOAPIC only). However, ich9->ioapic is never used for the first 16 GSIs, so the two vectors can be merged. Reviewed-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 SMB: make TYPE_ICH9_SMB_DEVICE macro publicEfimov Vasily
ICH9 SMB bridge can be created using qdev API despite existence of helper function. The type name is needed for such creation. Using a preprocessor alias instead the string type name itself is preferable. The patch makes the alias accessible through the header. Signed-off-by: Efimov Vasily <real@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29port92: handle A20 IRQ as GPIOEfimov Vasily
The port92 device has outgouing IRQ line A20. Currently the IRQ is referenced by a pointer which normally is set during machine initialization. The pointer is never changed at runtime. Hence, common GPIO model can be applied to A20 IRQ line. Note that checking for IRQ to be connected as in previous version of code is not required qemu_set_irq will do it. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29pckbd: handle A20 IRQ as GPIOEfimov Vasily
The i8042 device has outgouing IRQ line A20. Currently the IRQ is referenced by a pointer which normally is set during machine initialization. The pointer is never changed at runtime. So common GPIO model can be applied to A20 IRQ line. Note that checking for IRQ to be connected as in previous version of code is not required because qemu_set_irq will do it. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29Q35: implement property interfece to several parametersEfimov Vasily
During creation of Q35 instance several parameters are set using direct access. It violates Qemu device model. Correctly, the parameters should be handled as object properties. The patch adds four link type properties for fields: mch.ram_memory mch.pci_address_space mch.system_memory mch.address_space_io And, it adds two size type properties for fields: mch.below_4g_mem_size mch.above_4g_mem_size Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29vmport: identify vmport type by macro TYPE_VMPORTEfimov Vasily
Currently vmport device is identified by the string literal. Using a preprocessor alias instead is preferable. Signed-off-by: Efimov Vasily <real@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-24vmxnet3: add boot romGerd Hoffmann
Disable for old machine types as this is a guest visible change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-24pc: acpi: drop intermediate PCMachineState.node_cpuIgor Mammedov
PCMachineState.node_cpu was used for mapping APIC ID to numa node id as CPU entries in SRAT used to be built on sparse APIC ID bitmap (up to apic_id_limit). However since commit 5803fce pc: acpi: SRAT: create only valid processor lapic entries CPU entries in SRAT aren't build using apic bitmap but using 0..maxcpus index instead which is also used for creating numa_info[x].node_cpu map. So instead of doing useless intermediate conversion from 1. node by cpu index -> node by apic id i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu 2. apic id -> srat entry PMX PCMachineState.node_cpu[apic id] -> PMX value use numa_info[x].node_cpu map directly like ARM does and do 1. numa_info[x].node_cpu -> PMX value using index in range 0..maxcpus and drop not necessary PCMachineState.node_cpu and related code. That also removes the last (not counting legacy hotplug) dependency of ACPI code on apic_id_limit and need to allocate huge sparse PCMachineState.node_cpu array in case of 32-bit APIC IDs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: use new CPU hotplug interface since 2.7 machine typeIgor Mammedov
For compatibility reasons PC/Q35 will start with legacy CPU hotplug interface by default but with new CPU hotplug AML code since 2.7 machine type. That way legacy firmware that doesn't use QEMU generated ACPI tables will be able to continue using legacy CPU hotplug interface. While new machine type, with firmware supporting QEMU provided ACPI tables, will generate new CPU hotplug AML, which will switch to new CPU hotplug interface when guest OS executes its _INI method on ACPI tables loading. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hookIgor Mammedov
Add madt_cpu callback to AcpiDeviceIfClass and use it for generating LAPIC MADT entries for CPUs. Later it will be used for generating x2APIC entries in case of more than 255 CPUs and also would be reused by ARM target when ACPI CPU hotplug is introduced there. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-14target-i386: Implement CPUID[0xB] (Extended Topology Enumeration)Radim Krčmář
I looked at a dozen Intel CPU that have this CPUID and all of them always had Core offset as 1 (a wasted bit when hyperthreading is disabled) and Package offset at least 4 (wasted bits at <= 4 cores). QEMU uses more compact IDs and it doesn't make much sense to change it now. I keep the SMT and Core sub-leaves even if there is just one thread/core; it makes the code simpler and there should be no harm. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-06-14pc: Add 2.7 machineIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-06-07ICH9: fix typoCao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-23pc: Set CPU model-id on compat_props for pc <= 2.4Eduardo Habkost
Instead of relying on x86_cpudef_setup() calling qemu_hw_version(), just make old machines set model-id explicitly on compat_props for qemu64, qemu32, and athlon. This will allow us to eliminate x86_cpudef_setup() later. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23ioapic: keep RO bits for IOAPIC entryPeter Xu
Currently IOAPIC RO bits can be written. To be better aligned with hardware, we should let them read-only. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1462875682-1349-2-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-20machine: add properties to compat_props incrementalyIgor Mammedov
Switch to adding compat properties incrementaly instead of completly overwriting compat_props per machine type. That removes data duplication which we have due to nested [PC|SPAPR]_COMPAT_* macros. It also allows to set default device properties from default foo_machine_options() hook, which will be used in following patch for putting VMGENID device as a function if ISA bridge on pc/q35 machines. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-19apic: move target-dependent definitions to cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22Use scripts/clean-includes to drop redundant qemu/typedefs.hMarkus Armbruster
Re-run scripts/clean-includes to apply the previous commit's corrections and updates. Besides redundant qemu/typedefs.h, this only finds a redundant config-host.h include in ui/egl-helpers.c. No idea how that escaped the previous runs. Some manual whitespace trimming around dropped includes squashed in. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16machine: Use type_init() to register machine classesEduardo Habkost
Change all machine_init() users that simply call type_register*() to use type_init(). Cc: Evgeny Voevodin <e.voevodin@samsung.com> Cc: Maksim Kozlov <m.kozlov@samsung.com> Cc: Igor Mitsyanko <i.mitsyanko@gmail.com> Cc: Dmitry Solodkiy <d.solodkiy@samsung.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Alexander Graf <agraf@suse.de> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-03-11machine: introduce MachineClass.possible_cpu_arch_ids() hookIgor Mammedov
on x86 currently range 0..max_cpus is used to generate architecture-dependent CPU ID (APIC Id) for each present and possible CPUs. However architecture-dependent CPU IDs list could be sparse and code that needs to enumerate all IDs (ACPI) ended up doing guess work enumerating all possible and impossible IDs up to apic_id_limit = x86_cpu_apic_id_from_index(max_cpus). That leads to creation of MADT entries and Processor objects in ACPI tables for not possible CPUs. Fix it by allowing board specify a concrete list of CPU IDs accourding its own rules (which for x86 depends on topology). So that code that needs this list could request it from board instead of trying to guess what IDs are correct on its own. This interface will also allow to help making AML part of CPU hotplug target independent so it could be reused for ARM target. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-03-11nvdimm acpi: initialize the resource used by NVDIMM ACPIXiao Guangrong
32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into NVDIMM ACPI binary code OSPM uses this port to tell QEMU the final address of the DSM memory and notify QEMU to emulate the DSM method Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ich9lpc: fix typoCao jin
change some "rbca" to "rcrb"(root complex register block) while the other to "rcba"(root complex base address). Bonus: add more comments and fix some indentation. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11i386: expose floppy drive CMOS typeRoman Kagan
Make it possible to query the CMOS type of a floppy drive outside of the source file where it's defined. It will allow to properly populate the corresponding ACPI objects and thus enable Windows on BIOS-less systems to access the floppy drives. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-08pc: fw_cfg: move ioport base constant to pc.hGabriel L. Somlo
Move BIOS_CFG_IOPORT define from pc.c to pc.h, and rename it to FW_CFG_IO_BASE. Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marc Marí <markmb@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1455906029-25565-3-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-25Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, virtio, pci, pc Fixes all over the place. virtio dataplane migration support. Old q35 machine types removed. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 25 Feb 2016 11:16:46 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (21 commits) q35: No need to check gigabyte_align q35: Remove unused q35-acpi-dsdt.aml file ich9: Remove enable_tco arguments from init functions machine: Remove no_tco field q35: Remove old machine versions tests/vhost-user-bridge: fix build on 32 bit systems vring: remove virtio-scsi: do not use vring in dataplane virtio-blk: do not use vring in dataplane virtio-blk: fix "disabled data plane" mode virtio: export vring_notify as virtio_should_notify virtio: add AioContext-specific function for host notifiers vring: make vring_enable_notification return void block-migration: acquire AioContext as necessary pci core: function pci_bus_init() cleanup pci core: function pci_host_bus_register() cleanup balloon: Use only 'pc-dimm' type dimm for ballooning virtio-balloon: rewrite get_current_ram_size() move get_current_ram_size to virtio-balloon.c vhost-user: don't merge regions with different fds ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-25ich9: Remove enable_tco arguments from init functionsEduardo Habkost
The enable_tco arguments are always true, so they are not needed anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-23include: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. NB: If this commit breaks compilation for your out-of-tree patchseries or fork, then you need to make sure you add #include "qemu/osdep.h" to any new .c files that you have. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-06intel_iommu: large page supportJason Wang
Current intel_iommu only supports 4K page which may not be sufficient to cover guest working set. This patch tries to enable 2M and 1G mapping for intel_iommu. This is also useful for future device IOTLB implementation to have a better hit rate. Major work is adding a page mask field on IOTLB entry to make it support large page. And also use the slpte level as key to do IOTLB lookup. MAMV was increased to 18 to support direct invalidation for 1G mapping. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06pc: Eliminate PcGuestInfo structEduardo Habkost
The struct is not used for anything, now. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06pc: Move APIC and NUMA data from PcGuestInfo to PCMachineStateEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Move PcGuestInfo.fw_cfg to PCMachineStateEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Remove PcGuestInfo.isapc_ram_fw fieldEduardo Habkost
The code can use the PCMachineClass.pci_enabled field directly. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Remove RAM size fields from PcGuestInfoEduardo Habkost
The ACPI code can use the PCMachineState fields directly. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Remove compat fields from PcGuestInfoEduardo Habkost
Remove the fields: legacy_acpi_table_size, has_acpi_build, has_reserved_memory, and rsdp_in_ram from PcGuestInfo, and let the existing code use the PCMachineClass fields directly. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Simplify xen_load_linux() signatureEduardo Habkost
We can get the PcGuestInfo struct directly from PCMachineState, and the return value is not needed at all. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Simplify pc_memory_init() signatureEduardo Habkost
We can get the PcGuestInfo struct directly from PCMachineState, and the return value is not needed at all. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Eliminate struct PcGuestInfoStateEduardo Habkost
Instead of allocating a new struct just for PcGuestInfo and the mchine_done Notifier, place them inside PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Move PcGuestInfo declaration to top of fileEduardo Habkost
The struct will be used inside PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-01-22fpu: Replace uint32 typedef with uint32_tPeter Maydell
Replace the uint32 softfloat-specific typedef with uint32_t. This change was made with find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g' together with manual removal of the typedef definition, manual undoing of various mis-hits, and another couple of fixes found via test compilation. All the uses in hw/ were using the wrong type by mistake. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Leon Alrae <leon.alrae@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
2016-01-21target-i386: Add support to migrate vcpu's TSC rateHaozhong Zhang
This patch enables migrating vcpu's TSC rate. If KVM on the destination machine supports TSC scaling, guest programs will observe a consistent TSC rate across the migration. If TSC scaling is not supported on the destination machine, the migration will not be aborted and QEMU on the destination will not set vcpu's TSC rate to the migrated value. If vcpu's TSC rate specified by CPU option 'tsc-freq' on the destination machine is inconsistent with the migrated TSC rate, the migration will be aborted. For backwards compatibility, the migration of vcpu's TSC rate is disabled on pc-*-2.5 and older machine types. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: Rewrote comment at kvm_arch_put_registers()] [ehabkost: Moved compat code to pc-2.5] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-11Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160111' ↵Peter Maydell
into staging ppc patch queue 2016-01-11 Biggest content is a thorough cleanups of spapr machine type handling. Also contains several other minor cleanups, bugfixes and extensions. # gpg: Signature made Mon 11 Jan 2016 04:34:38 GMT using RSA key ID 20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.6-20160111: hw/ppc/spapr: fix spapr->kvm_type leak spapr vio: fix to incomplete QOMify hw/ppc/spapr: Use XHCI as host controller for new spapr machines pseries: Add pseries-2.6 machine type pseries: Improve setting of default machine version pseries: Restructure class_options functions pseries: DEFINE_SPAPR_MACHINE pseries: Use SET_MACHINE_COMPAT Move SET_MACHINE_COMPAT macro to boards.h pseries: Remove versions from mc->desc pseries: Remove redundant calls to spapr_machine_initfn() pseries: Rearrange versioned machine type code pseries: Remove redundant setting of mc->name for pseries-2.5 machine spapr: Add /system-id target-ppc: Define kvmppc_read_int_dt() hw/ppc/spapr_rtc: Remove bad class_size value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11Move SET_MACHINE_COMPAT macro to boards.hDavid Gibson
pc.h defines a SET_MACHINE_COMPAT macro to make setting up compat_props for the various PC machine versions less verbose. There's nothing inherently PC specific about it, though, so move it to boards.h where other versioned machine types (like pseries-*) can use it. While we're doing that, change it's indentation to be a bit more regular. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-09i386/pc: expose identifying the floppy controllerRoman Kagan
Factor out and expose the function to locate the floppy controller in the system. It will allow to dynamically populate the relevant objects in the ACPI tables. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: qemu-block@nongnu.org Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 16:46:40 +0000