aboutsummaryrefslogtreecommitdiff
path: root/include/hw/i386
AgeCommit message (Collapse)Author
2014-08-14pc: Create 2.2 machine typeJan Kiszka
Yet identical to 2.1. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-01qemu: support xen hvm direct kernel bootChunyan Liu
qemu side patch to support xen HVM direct kernel boot: if -kernel exists, calls xen_load_linux(), which will read kernel/initrd and add a linuxboot.bin or multiboot.bin option rom. The linuxboot.bin/multiboot.bin will load kernel/initrd and jump to execute kernel directly. It's working when xen uses seabios. During this work, found the 'kvmvapic' is in option_rom list, it should not be there in xen case. Set s->vapic_control = 0 in xen_apic_realize() to handle that. Signed-off-by: Chunyan Liu <cyliu@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28pc: hack for migration compatibility from QEMU 2.0Paolo Bonzini
Changing the ACPI table size causes migration to break, and the memory hotplug work opened our eyes on how horribly we were breaking things in 2.0 already. The ACPI table size is rounded to the next 4k, which one would think gives some headroom. In practice this is not the case, because the user can control the ACPI table size (each CPU adds 97 bytes to the SSDT and 8 to the MADT) and so some "-smp" values will break the 4k boundary and fail to migrate. Similarly, PCI bridges add ~1870 bytes to the SSDT. This patch concerns itself with fixing migration from QEMU 2.0. It computes the payload size of QEMU 2.0 and always uses that one. The previous patch shrunk the ACPI tables enough that the QEMU 2.0 size should always be enough; non-AML tables can change depending on the configuration (especially MADT, SRAT, HPET) but they remain the same between QEMU 2.0 and 2.1, so we only compute our padding based on the sizes of the SSDT and DSDT. Migration from QEMU 1.7 should work for guests that have a number of CPUs other than 12, 13, 14, 54, 55, 56, 97, 98, 139, 140. It was already broken from QEMU 1.7 to QEMU 2.0 in the same way, though. Even with this patch, QEMU 1.7 and 2.0 have two different ideas of "-M pc-i440fx-2.0" when there are PCI bridges. Igor sent a patch to adopt the QEMU 1.7 definition. I think distributions should apply it if they move directly from QEMU 1.7 to 2.1+ without ever packaging version 2.0. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29pc: Fix "prog_if" typo on PC_COMPAT_2_0Eduardo Habkost
The property name is "prog_if", not "prof_if". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29pc: Move q35 compat props to PC_COMPAT_*Eduardo Habkost
For each compat property on PC_Q35_COMPAT_*, there are only two possibilities: * If the device is never instantiated when using a machine other than pc-q35, then the compat property can be safely added to PC_COMPAT_*; * If the device can be instantiated when using a machine other than pc-q35, that means the other machines also need the compat property to be set. That means we don't need separate PC_Q35_COMPAT_* macros at all, today. The hpet.hpet-intcap case is interesting: piix and q35 do have something that emulates different defaults, but the machine-specific default is applied _after_ compat_props are applied, by simply checking if the property is zero (which is the real default on the hpet code). The hpet.hpet-intcap=0x4 compat property can (should?) be applied to piix too, because 0x4 was the default on both piix and q35 before the hpet-intcap property was introduced. Now, if one day we change the default HPET intcap on one of the PC machine-types again, we may want to introduce PC_{Q35,I440FX}_COMPAT macros. But while we don't need that, we can keep the code simple. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23pc & q35: Add new machine opt max-ram-below-4gDon Slutz
This is a pc & q35 only machine opt. If you add enough PCI devices then all mmio for them will not fit below 4G which may not be the layout the user wanted. This allows you to increase the below 4G address space that PCI devices can use (aka decrease ram below 4G) and therefore in more cases not have any mmio that is above 4G. For example using "-machine pc,max-ram-below-4g=2G" on the command line will limit the amount of ram that is below 4G to 2G. Note: this machine option cannot be used to increase the amount of ram below 4G. Signed-off-by: Don Slutz <dslutz@verizon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix 32 bit
2014-06-23hw/pcie: implement power controller functionalityMarcel Apfelbaum
It is needed by hot-unplug in order to get an indication from the OS when the device can be physically detached. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,pci,virtio,hotplug fixes, enhancements numa work by Hu Tao and others memory hotplug by Igor vhost-user by Nikolay, Antonios and others guest virtio announcements by Jason qtest fixes by Sergey qdev hotplug fixes by Paolo misc other fixes mostly by myself Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (109 commits) numa: use RAM_ADDR_FMT with ram_addr_t qapi/string-output-visitor: fix bugs tests: simplify code qapi: fix input visitor bugs acpi: rephrase comment qmp: add ACPI_DEVICE_OST event handling qmp: add query-acpi-ospm-status command acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices acpi: introduce TYPE_ACPI_DEVICE_IF interface qmp: add query-memory-devices command numa: handle mmaped memory allocation failure correctly pc: acpi: do not hardcode preprocessor qmp: clean out whitespace qdev: recursively unrealize devices when unrealizing bus qdev: reorganize error reporting in bus_set_realized qapi: fix build on glib < 2.28 qapi: make string output visitor parse int list qapi: make string input visitor parse int list tests: fix memory leak in test of string input visitor hmp: add info memdev ... Conflicts: include/hw/i386/pc.h [PMM: fixed minor conflict in pc.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19pc: pass MachineState to pc_memory_initPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19virtio-net: announce self by guestJason Wang
It's hard to track all mac addresses and their configurations (e.g vlan or ipv6) in qemu. Without this information, it's impossible to build proper garp packet after migration. The only possible solution to this is let guest (who knows all configurations) to do this. So, this patch introduces a new readonly config status bit of virtio-net, VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce presence of its link through config update interrupt.When guest has done the announcement, it should ack the notification through VIRTIO_NET_CTRL_ANNOUNCE_ACK cmd. This feature is negotiated by a new feature bit VIRTIO_NET_F_ANNOUNCE (which has already been supported by Linux guest). During load, a counter of announcing rounds is set so that after the vm is running it can trigger rounds of config interrupts to notify the guest to build and send the correct garps. Cc: Liuyongan <liuyongan@huawei.com> Cc: Amos Kong <akong@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19ich: get rid of spaces in type nameMichael S. Tsirkin
Names with spaces in them are nasty, let's not go there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add "hotplug-memory-region-size" property to PC_MACHINEIgor Mammedov
... it will be used by acpi-build code and by unit tests Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add acpi-device link to PCMachineStateIgor Mammedov
the link will used later to access device implementing ACPI functions instead of adhoc lookup in QOM tree. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi:ich9: add memory hotplug handlingIgor Mammedov
Add memory hotplug initialization/handling to ICH9 LPC device and enable it by default for post 2.0 machine types Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi:piix4: add memory hotplug handlingIgor Mammedov
Add memory hotplug initialization/handling to PIIX4_PM device and enable it by default for post 2.0 machine types Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: resolve conflict in pc.h
2014-06-19pc: add memory hotplug handler to PC_MACHINEIgor Mammedov
that will perform mapping of PC_DIMM device into guest's RAM address space Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOSIgor Mammedov
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI BARs mapping could safely start in high memory. Allowing BIOS to start mapping 64-bit PCI BARs at address where it wouldn't conflict with other mappings QEMU might place before it. That permits QEMU to reserve extra address space before 64-bit PCI hole for memory hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: initialize memory hotplug address spaceIgor Mammedov
initialize and map hotplug memory address space container into guest's RAM address space. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18pc: create custom generic PC machine typeIgor Mammedov
it will be used for PC specific options/variables Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18virtio-scsi: add support for the any_layout featurePaolo Bonzini
Store the request and response headers by value, and let virtio_scsi_parse_req check that there is only one of datain and dataout. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,pci,virtio,qdev fixes, tests new tests for SMBIOS SMBIOS fixes pc, pci fixes qdev patches stayed on list for a month with no review, as I told people on KVM forum I'm merging stuch patches if they look fine. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: qdev: Add test of qdev_prop_check_global qdev: Display warning about unused -global tests: add smbios testing tests: rename acpi-test to bios-tables-test virtio-balloon: return empty data when no stats are available pcie_host: Turn pcie_host_init() into an instance_init SMBIOS: Fix type 17 field sizes SMBIOS: Update Type 0 struct generator for machines >= 2.1 SMBIOS: Fix endian-ness when populating multi-byte fields serial-pci: Set prog interface field of pci config to 16550 compatible Conflicts: include/hw/i386/pc.h [PMM: fixed trivial conflict in pc.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-02xhci: order superspeed ports firstGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-21SMBIOS: Fix type 17 field sizesGabriel L. Somlo
Fields for configured_clock_speed and various voltage values introduced in spec v2.7+ should be "word", i.e. 16 bits. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21SMBIOS: Update Type 0 struct generator for machines >= 2.1Gabriel L. Somlo
Update how type 0 (bios info) structures are generated, as follows: - convert bios_characteristics field to uin64_t (instead of uint8_t[8]), as described in the current smbios spec (v2.8) - enable "virtual machine" bit in bios_characteristics_extension_bits - add command line option to enable "uefi supported" bit in bios_characteristics_extension_bits These updates should make this optional structure more useful when used with edk2/ovmf. Only pc machines >= 2.1 are affected, and only when a type 0 structure is explicitly specified on the command line. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21serial-pci: Set prog interface field of pci config to 16550 compatibleBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-07apic: use emulated lapic version 0x14 on pc machines >= 2.1Gabriel L. Somlo
Add "version" property to local apic, and have it default to 0x14 for pc machines starting at 2.1. For compatibility with previous releases, pc machines up to 2.0 will have their local apic version set to 0x11. Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-07pc: add compat_props placeholder for 2.0 machine typeGabriel L. Somlo
Add the "boilerplate" necessary for subsequent patches to simply drop in compat_props for pc machines 2.0 and older. This patch contains no functional changes. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-05SMBIOS: Build aggregate smbios tables and entry pointGabriel L. Somlo
Build an aggregate set of smbios tables and an entry point structure. Insert tables and entry point into fw_cfg respectively under "etc/smbios/smbios-tables" and "etc/smbios/smbios-anchor". Machine types <= 2.0 will for now continue using field-by-field overrides to SeaBIOS defaults, but for machine types 2.1 and up we expect the BIOS to look for and use the aggregate tables generated by this patch. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> [ kraxel: fix 32bit build ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05SMBIOS: Use bitmaps to prevent incompatible comand line optionsGabriel L. Somlo
Replace existing smbios_check_collision() functionality with a pair of bitmaps: have_binfile_bitmap and have_fields_bitmap. Bits corresponding to each smbios type are set by smbios_entry_add(), which also uses the bitmaps to ensure that binary blobs and field values are never accepted for the same type. These bitmaps will also be used in the future to decide whether or not to build a full table for a given smbios type. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05SMBIOS: Update header file definitionsGabriel L. Somlo
Add definitions for smbios entry point (anchor), and for type 2 (base board) structure which is required by some versions of OS X. Remove definition for type 20 (memory device mapped address) structure, which is no longer required as of smbios spec v2.5. Update all other structure definitions to bring them into compliance with smbios spec v2.8. This patch contains no functional changes. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05SMBIOS: Rename symbols to better reflect future useGabriel L. Somlo
Rename the following symbols: - smbios_set_type1_defaults() to the more general smbios_set_defaults(); - bool smbios_type1_defaults to the more general smbios_defaults; - smbios_get_table() to smbios_get_table_legacy(); This patch contains no functional changes. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05E820: Add interface for accessing e820 tableGabriel L. Somlo
Add the following two functions: - e820_get_num_entries() - query the size of the e820 table - e820_get_entry() - grab an entry matching a given set of criteria This interface is currently necessary for creating type 19 (memory array mapped address) structures in smbios. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-11q35: Correct typo BRDIGE -> BRIDGEBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-14i2c: Rename i2c_bus to I2CBusAndreas Färber
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-01-26pc: Save size of RAM below 4GBEduardo Habkost
The ram_below_4g value will be useful in other places, such as the ACPI table code, and other code that currently requires passing below_4g_mem_size around in function arguments. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26piix4: add acpi pci hotplug supportMichael S. Tsirkin
Add support for acpi pci hotplug using the new infrastructure. PIIX4 legacy interface is maintained as is for machine types 1.7 and older. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-16usb: add support for microsoft os descriptorsGerd Hoffmann
This patch adds support for special usb descriptors used by microsoft windows. They allow more fine-grained control over driver binding and adding entries to the registry for configuration. As this is a guest-visible change the "msos-desc" compat property has been added to turn this off for 1.7 + older Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-01-10Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
acpi,pci,pc,fedora,virtio fixes and enhancements This includes some Preparatory patches for cpu hotplug for q25 and memory hotplug by Igor, tests and memory mapping change by Laszlo and pci reset cleanup by Paolo. There are also some fixes for fedora and virtio: included here since they are test blockers for me. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: target-arm: fix build with gcc 4.8.2 virtio: add back call to virtio_bus_device_unplugged piix: fix 32bit pci hole qdev: switch reset to post-order qdev: allow both pre- and post-order vists in qdev walking functions pci: clean up resetting of IRQs pci: do not export pci_bus_reset ACPI/DSDT-CPU: cleanup bogus comment ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler acpi: ich9: allow guest to clear SCI rised by GPE acpi: factor out common pm_update_sci() into acpi core acpi: piix4: remove not needed GPE0 mask i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash i440fx-test: generate temporary firmware blob i440fx-test: give each GTest case its own qtest i440fx-test: qtest_start() should be paired with qtest_end() hw/i386/pc_sysfw: support two flash drives pc_piix: document gigabyte_align piix: gigabyte alignment for ram Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-24ioapic: QOM'ify ioapicxiaoqiang zhao
Convert 'init' function to QOM's 'realize' for ioapic and kvm-ioapic. Change variable 'ioapic_no' from static to global. Then we can drop the 'instance_no' function argument. Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24apic: QOM'ify APICxiaoqiang zhao
Convert 'init' function to QOM's 'realize' for apic, kvm/apic and xen/xen_apic. Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23piix: fix 32bit pci holeGerd Hoffmann
Make the 32bit pci hole start at end of ram, so all possible address space is covered. We used to try and make addresses aligned so they are easier to cover with MTRRs, but since they are cosmetic on KVM, this is probably not worth worrying about. Of course the firmware can use less than that. Leaving space unused is no problem, mapping pci bars outside the hole causes problems though. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11hpet: enable to entitle more irq pins for hpetLiu Ping Fan
Owning to some different hardware design, piix and q35 need different compat. So making them diverge. On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 can be assigned to hpet as guest chooses. So we introduce intcap property to do that. Consider the compat and piix/q35, we finally have the following value for intcap: For piix, hpet's intcap is hard coded as IRQ2. For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise IRQ2, IRQ8, and IRQ16~23 are allowed. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10smbios: Set system manufacturer, product & version by defaultMarkus Armbruster
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs, no version. Best SeaBIOS can do, but we can provide better defaults: manufacturer QEMU, product & version taken from QEMUMachine desc and name. Take care to do this only for new machine types, of course. Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member product stable in the future. Use copies instead, and in a way that makes it obvious that they're guest ABI. Note that we can be trusted to keep values of member name, because that has always been ABI. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10pc: map PCI address space as catchall region for not mapped addressesMichael S. Tsirkin
With a help of negative memory region priority PCI address space is mapped underneath RAM regions effectively catching every access to addresses not mapped by any other region. It simplifies PCI address space mapping into system address space. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
2013-11-21pc: get rid of builtin pvpanic for "-M pc-1.5"Paolo Bonzini
This causes two slight backwards-incompatibilities between "-M pc-1.5" and 1.5's "-M pc": (1) a fw_cfg file is removed with this patch. This is only a problem if migration stops the virtual machine exactly during fw_cfg enumeration. (2) after migration, a VM created without an explicit "-device pvpanic" will stop reporting panics to management. The first problem only occurs if migration is done at a very, very early point (and I'm not sure it can happen in practice for reasonable-size VMs, since it will likely take more time to send the RAM to destination, than it will take for BIOS to scan fw_cfg). The second problem only occurs if the guest panics _and_ has a guest driver _and_ management knows to look at the crash event, so it is mostly theoretical at this point in time. Thus keep the code simple, and pretend it was never broken. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-10Fix pc migration from qemu <= 1.5Cole Robinson
The following commit introduced a migration incompatibility: commit 568f0690fd9aa4d39d84b04c1a5dbb53a915c3fe Author: David Gibson <david@gibson.dropbear.id.au> Date: Thu Jun 6 18:48:49 2013 +1000 pci: Replace pci_find_domain() with more general pci_root_bus_path() The issue is that i440fx savevm idstr went from 0000:00:00.0/I440FX to 0000:00.0/I440FX. Unfortunately we are stuck with the breakage for 1.6 machine types. Add a compat property to maintain the busted idstr for the 1.6 machine types, but revert to the old style format for 1.7+, and <= 1.5. Tested with migration from qemu 1.5, qemu 1.6, and qemu.git. Cc: qemu-stable@nongnu.org Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-31Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci, pc, acpi fixes, enhancements This includes some pretty big changes: - pci master abort support by Marcel - pci IRQ API rework by Marcel - acpi generation support by myself Everything has gone through several revisions, latest versions have been on list for a while without any more comments, tested by several people. Please pull for 1.7. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: (39 commits) ssdt-proc: update generated file ssdt: fix PBLK length i386: ACPI table generation code from seabios pc: use new api to add builtin tables acpi: add interface to access user-installed tables hpet: add API to find it pvpanic: add API to access io port ich9: APIs for pc guest info piix: APIs for pc guest info acpi/piix: add macros for acpi property names i386: define pc guest info loader: allow adding ROMs in done callbacks i386: add bios linker/loader loader: use file path size from fw_cfg.h acpi: ssdt pcihp: updat generated file acpi: pre-compiled ASL files acpi: add rules to compile ASL source i386: add ACPI table files from seabios q35: expose mmcfg size as a property q35: use macro for MCFG property name ... Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-14i386: ACPI table generation code from seabiosMichael S. Tsirkin
This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pvpanic: add API to access io portMichael S. Tsirkin
Add API to find pvpanic device and get its io port. Will be used to fill in guest info structure. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14ich9: APIs for pc guest infoMichael S. Tsirkin
This adds APIs that will be used to fill in acpi tables, implemented using QOM, to various ich9 components. Some information is still missing in QOM, so we fall back on lookups by type instead. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 17:50:15 +0000