aboutsummaryrefslogtreecommitdiff
path: root/include/hw/i2c
AgeCommit message (Collapse)Author
2023-11-07hw/i2c: pmbus: add VCAP registerTitus Rwantare
VCAP is a register for devices with energy storage capacitors. Reviewed-by: Benjamin Streb <bstreb@google.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-ID: <20231023-staging-pmbus-v3-v4-4-07a8cb7cd20a@google.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-07hw/i2c: pmbus: add fan supportTitus Rwantare
PMBus devices may integrate fans whose operation is configurable over PMBus. This commit allows the driver to read and write the fan control registers but does not model the operation of fans. Reviewed-by: Stephen Longfield <slongfield@google.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-ID: <20231023-staging-pmbus-v3-v4-3-07a8cb7cd20a@google.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-07hw/i2c: pmbus: add vout mode bitfieldsTitus Rwantare
The VOUT_MODE command is described in the PMBus Specification, Part II, Ver 1.3 Section 8.3 VOUT_MODE has a three bit mode and 4 bit parameter, the three bit mode determines whether voltages are formatted as uint16, uint16, VID, and Direct modes. VID and Direct modes use the remaining 5 bits to scale the voltage readings. Reviewed-by: Hao Wu <wuhaotsh@google.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-ID: <20231023-staging-pmbus-v3-v4-2-07a8cb7cd20a@google.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-07hw/i2c: pmbus add support for block receiveTitus Rwantare
PMBus devices can send and receive variable length data using the block read and write format, with the first byte in the payload denoting the length. This is mostly used for strings and on-device logs. Devices can respond to a block read with an empty string. Reviewed-by: Hao Wu <wuhaotsh@google.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-ID: <20231023-staging-pmbus-v3-v4-1-07a8cb7cd20a@google.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-09-06Merge tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu into ↵Stefan Hajnoczi
staging aspeed queue: * Fixes for the Aspeed I2C model * New SDK image for avocado tests * blockdev support for flash device definition * SD refactoring preparing ground for eMMC support # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmTxsaQACgkQUaNDx8/7 # 7KGXmg//XJNisscl/VWSBaGmH5MbQUAg/QCRalXx1V/lJ8rhE/JqwnWKuoPFd4EN # iDlh3ufpzxPhHFc9boechuM5ytlrJxpLJoCIJ4sw/4qnO3Dy3Q6BCy1t8Ma62D1u # oE7cAMHsriJ1uTJNHUTFo72VapTaH2XwFN9lFDuQW45d+WWAXtVJsqvRgFETNmw6 # YYnTTpH2gLTZZFEgOixhWpGLh4Ibc/l8U1VzL0ctQmC11xng0bqk3PAqU9NGzcM5 # MJmEGAxg43CnFu9NJI1nMqC/coi/8PFtrM7HprSwE3H8Jkwncs4ePVT+kZQC+VNQ # 7EaVkksfEGHlN8XP5+eQDrQ5yT6ve+fbHTLQhwULfeyt0GlQ8h1yewvHCDWo/zw3 # XI1ZyOcNZ2yiaenSUrTPzu0LiqZEJQnzRjPCpgTi1fU08ryEMEaPtr176YDLCguQ # cpRj4QSZHCrGl/Eo9NlkFP/2rQDKTvCcedKPkYLQtsurSiH/36Oj9YvZycNtZ574 # ortKAtru4YV/rglNX4L8JDhdI+nqvy1liifpJsiS/2KBZDpVFaP8PzGIV40HNy3G # 8/LVTnaggZaScF3ftHhkg84uQumELS9l2dhsNCL9HqdlrNXLQrVAIR6iuQlpOKBa # 5S/6h7ZXGOb1qNVQjYp4HCrB7X1KIJYksZ3GdUREf8ot5Ds1FhE= # =ymmX # -----END PGP SIGNATURE----- # gpg: Signature made Fri 01 Sep 2023 05:40:52 EDT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown] # gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu: (26 commits) hw/sd: Introduce a "sd-card" SPI variant model hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler hw/sd: Add sd_cmd_SEND_TUNING_BLOCK() handler hw/sd: Add sd_cmd_SEND_RELATIVE_ADDR() handler hw/sd: Add sd_cmd_ALL_SEND_CID() handler hw/sd: Add sd_cmd_SEND_OP_CMD() handler hw/sd: Add sd_cmd_GO_IDLE_STATE() handler hw/sd: Add sd_cmd_unimplemented() handler hw/sd: Add sd_cmd_illegal() handler hw/sd: Introduce sd_cmd_handler type hw/sd: Move proto_name to SDProto structure hw/sd: When card is in wrong state, log which spec version is used hw/sd: When card is in wrong state, log which state it is hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01 aspeed: Get the BlockBackend of FMC0 from the flash device m25p80: Introduce an helper to retrieve the BlockBackend of a device aspeed: Create flash devices only when defaults are enabled hw/ssi: Check for duplicate CS indexes aspeed/smc: Wire CS lines at reset hw/ssi: Introduce a ssi_get_cs() helper ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-09-01hw/i2c/aspeed: Add support for buffer organizationHang Yu
Added support for the buffer organization option in pool buffer control register.when set to 1,The buffer is split into two parts: Lower 16 bytes for Tx and higher 16 bytes for Rx. Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: checkpatch fixes ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-09-01hw/i2c/aspeed: Fix Tx count and Rx size error in buffer pool modeHang Yu
Fixed inconsistency between the regisiter bit field definition header file and the ast2600 datasheet. The reg name is I2CD1C:Pool Buffer Control Register in old register mode and I2CC0C: Master/Slave Pool Buffer Control Register in new register mode. They share bit field [12:8]:Transmit Data Byte Count and bit field [29:24]:Actual Received Pool Buffer Size according to the datasheet. According to the ast2600 datasheet,the actual Tx count is Transmit Data Byte Count plus 1, and the max Rx size is Receive Pool Buffer Size plus 1, both in Pool Buffer Control Register. The version before forgot to plus 1, and mistake Rx count for Rx size. Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn> Fixes: 3be3d6ccf2ad ("aspeed: i2c: Migrate to registerfields API") Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-08-31hw/i2c: spelling fixesMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-04-20qtest: Add functions for accessing devices on Aspeed I2C controllerStefan Berger
Add read and write functions for accessing registers of I2C devices connected to the Aspeed I2C controller. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-03-06hw: allwinner-i2c: Fix TWI_CNTR_INT_FLAG on SUN6i SoCsqianfan Zhao
TWI_CNTR_INT_FLAG is W1C(write 1 to clear and write 0 has non-effect) register on SUN6i based SoCs, we should lower interrupt when the guest set this bit. The linux kernel will hang in irq handler(mv64xxx_i2c_intr) if no device connected on the i2c bus, next is the trace log: allwinner_i2c_write write CNTR(0x0c): 0xc4 A_ACK BUS_EN INT_EN allwinner_i2c_write write CNTR(0x0c): 0xcc A_ACK INT_FLAG BUS_EN INT_EN allwinner_i2c_read read CNTR(0x0c): 0xcc A_ACK INT_FLAG BUS_EN INT_EN allwinner_i2c_read read STAT(0x10): 0x20 STAT_M_ADDR_WR_NACK allwinner_i2c_write write CNTR(0x0c): 0x54 A_ACK M_STP BUS_EN allwinner_i2c_write write CNTR(0x0c): 0x4c A_ACK INT_FLAG BUS_EN allwinner_i2c_read read CNTR(0x0c): 0x4c A_ACK INT_FLAG BUS_EN allwinner_i2c_read read STAT(0x10): 0xf8 STAT_IDLE allwinner_i2c_write write CNTR(0x0c): 0x54 A_ACK M_STP BUS_EN allwinner_i2c_write write CNTR(0x0c): 0x4c A_ACK INT_FLAG BUS_EN allwinner_i2c_read read CNTR(0x0c): 0x4c A_ACK INT_FLAG BUS_EN allwinner_i2c_read read STAT(0x10): 0xf8 STAT_IDLE ... Fix it. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Tested-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-02hw/i2c: only schedule pending master when bus is idleKlaus Jensen
It is not given that the current master will release the bus after a transfer ends. Only schedule a pending master if the bus is idle. Fixes: 37fa5ca42623 ("hw/i2c: support multiple masters") Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20221116084312.35808-2-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-01-23hw/i2c/versatile_i2c: Replace TYPE_VERSATILE_I2C -> TYPE_ARM_SBCON_I2CPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230110082508.24038-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23hw/i2c/versatile_i2c: Replace VersatileI2CState -> ArmSbconI2CStatePhilippe Mathieu-Daudé
In order to rename TYPE_VERSATILE_I2C as TYPE_ARM_SBCON_I2C (the formal ARM naming), start renaming its state. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230110082508.24038-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23hw/i2c/bitbang_i2c: Define TYPE_GPIO_I2C in public headerPhilippe Mathieu-Daudé
Define TYPE_GPIO_I2C in the public "hw/i2c/bitbang_i2c.h" header and use it in hw/arm/musicpal.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-id: 20230111085016.44551-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()Philippe Mathieu-Daudé
NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12{hw/i2c,docs/system/arm}: Allwinner TWI/I2C EmulationStrahinja Jankovic
This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-24hw/i2c/aspeed: Fix old reg slave receivePeter Delevoryas
I think when Klaus ported his slave mode changes from the original patch series to the rewritten I2C module, he changed the behavior of the first byte that is received by the slave device. What's supposed to happen is that the AspeedI2CBus's slave device's i2c_event callback should run, and if the event is "send_async", then it should populate the byte buffer with the 8-bit I2C address that is being sent to. Since we only support "send_async", the lowest bit should always be 0 (indicating that the master is requesting to send data). This is the code Klaus had previously, for reference. [1] switch (event) { case I2C_START_SEND: bus->buf = bus->dev_addr << 1; bus->buf &= I2CD_BYTE_BUF_RX_MASK; bus->buf <<= I2CD_BYTE_BUF_RX_SHIFT; bus->intr_status |= (I2CD_INTR_SLAVE_ADDR_RX_MATCH | I2CD_INTR_RX_DONE); aspeed_i2c_set_state(bus, I2CD_STXD); break; [1]: https://lore.kernel.org/qemu-devel/20220331165737.1073520-4-its@irrelevant.dk/ Fixes: a8d48f59cd021b25 ("hw/i2c/aspeed: add slave device in old register mode") Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Message-Id: <20220820225712.713209-2-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14hw/i2c/pmbus: Add idle state to return 0xff'sPeter Delevoryas
Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Titus Rwantare <titusr@google.com> Message-Id: <20220701000626.77395-2-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c/aspeed: Add new-registers DMA slave mode RX supportPeter Delevoryas
This commit adds support for DMA RX in slave mode while using the new register set in the AST2600 and AST1030. This patch also pretty much assumes packet mode is enabled, I'm not sure if this will work in DMA step mode. This is particularly useful for testing IPMB exchanges between Zephyr and external devices, which requires multi-master I2C support and DMA in the new register mode, because the Zephyr drivers from Aspeed use DMA in the new mode by default. The Zephyr drivers are also using packet mode. The typical sequence of events for receiving data in DMA slave + packet mode is that the Zephyr firmware will configure the slave address register with an address to receive on and configure the bus's function control register to enable master mode and slave mode simultaneously at startup, before any transfers are initiated. RX DMA is enabled in the slave mode command register, and the slave RX DMA buffer address and slave RX DMA buffer length are set. TX DMA is not covered in this patch. When the Aspeed I2C controller receives data from some other I2C master, it will reset the I2CS_DMA_LEN RX_LEN value to zero, then buffer incoming data in the RX DMA buffer while incrementing the I2CC_DMA_ADDR address counter and decrementing the I2CC_DMA_LEN counter. It will also update the I2CS_DMA_LEN RX_LEN value along the way. Once all the data has been received, the bus controller will raise an interrupt indicating a packet command was completed, the slave address matched, a normal stop condition was seen, and the transfer was an RX operation. If the master sent a NACK instead of a normal stop condition, or the transfer timed out, then a slightly different set of interrupt status values would be set. Those conditions are not handled in this commit. The Zephyr firmware then collects data from the RX DMA buffer and clears the status register by writing the PKT_MODE_EN bit to the status register. In packet mode, clearing the packet mode interrupt enable bit also clears most of the other interrupt bits automatically (except for a few bits above it). Note: if the master transmit or receive functions were in use simultaneously with the slave mode receive functionality, then the master mode functions may have raised the interrupt line for the bus before the DMA slave transfer is complete. It's important to have the slave's interrupt status register clear throughout the receive operation, and if the slave attempts to raise the interrupt before the master interrupt status is cleared, then it needs to re-raise the interrupt once the master interrupt status is cleared. (And vice-versa). That's why in this commit, when the master interrupt status is cleared and the interrupt line is lowered, we call the slave interrupt _raise_ function, to see if the interrupt was pending. (And again, vice-versa). Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220630045133.32251-8-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c/aspeed: add slave device in old register modeKlaus Jensen
Add slave mode functionality for the Aspeed I2C controller in old register mode. This is implemented by realizing an I2C slave device owned by the I2C controller and attached to its own bus. The I2C slave device only implements asynchronous sends on the bus, so slaves not supporting that will not be able to communicate with it. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: checkpatch fixes ] Message-Id: <20220601210831.67259-6-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-7-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c: add asynchronous sendKlaus Jensen
Add an asynchronous version of i2c_send() that requires the slave to explicitly acknowledge on the bus with i2c_ack(). The current master must use the new i2c_start_send_async() to indicate that it wants to do an asynchronous transfer. This allows the i2c core to check if the target slave supports this or not. This approach relies on adding a new enum i2c_event member, which is why a bunch of other devices needs changes in their event handling switches. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Message-Id: <20220601210831.67259-5-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-6-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c: support multiple mastersKlaus Jensen
Allow slaves to master the bus by registering a bottom halve. If the bus is busy, the bottom half is queued up. When a slave has succesfully mastered the bus, the bottom half is scheduled. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg : - fixed typos in commit log ] Message-Id: <20220601210831.67259-4-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-5-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22hw/i2c/aspeed: add DEV_ADDR in old register modeKlaus Jensen
Add support for writing and reading the device address register in old register mode. On the AST2400 (only 1 slave address) * no upper bits On the AST2500 (2 possible slave addresses), * bit[31] : Slave Address match indicator * bit[30] : Slave Address Receiving pending On the AST2600 (3 possible slave addresses), * bit[31-30] : Slave Address match indicator * bit[29] : Slave Address Receiving pending The model could be more precise to take into account all fields but since the Linux driver is masking the register value being set, it should be fine. See commit 3fb2e2aeafb2 ("i2c: aspeed: disable additional device addresses on ast2[56]xx") from Zeiv. This can be addressed later. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: add details to commit log ] Message-Id: <20220601210831.67259-3-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed/i2c: Add ast1030 controller modelsCédric Le Goater
Based on : https://lore.kernel.org/qemu-devel/20220324100439.478317-2-troy_lee@aspeedtech.com/ Cc: Troy Lee <troy_lee@aspeedtech.com> Cc: Jamin Lin <jamin_lin@aspeedtech.com> Cc: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Move regs and helpers to header fileJoe Komlodi
Moves register definitions and short commonly used inlined functiosn to the header file to help tidy up the implementation file. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324 Message-Id: <20220331043248.2237838-8-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Add new mode supportJoe Komlodi
On AST2600, I2C has a secondary mode, called "new mode", which changes the layout of registers, adds some minor behavior changes, and introduces a new way to transfer data called "packet mode". Most of the bit positions of the fields are the same between old and new mode, so we use SHARED_FIELD_XX macros to reuse most of the code between the different modes. For packet mode, most of the command behavior is the same compared to other modes, but there are some minor changes to how interrupts are handled compared to other modes. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I072f8301964f623afc74af1fe50c12e5caef199e Message-Id: <20220331043248.2237838-6-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Use reg array instead of individual varsJoe Komlodi
Using a register array will allow us to represent old-mode and new-mode I2C registers by using the same underlying register array, instead of adding an entire new set of variables to represent new mode. As part of this, we also do additional cleanup to use ARRAY_FIELD_ macros instead of FIELD_ macros on registers. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: Ib94996b17c361b8490c042b43c99d8abc69332e3 [ clg: use of memset in aspeed_i2c_bus_reset() ] Message-Id: <20220331043248.2237838-5-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-11Clean up ill-advised or unusual header guardsMarkus Armbruster
Leading underscores are ill-advised because such identifiers are reserved. Trailing underscores are merely ugly. Strip both. Our header guards commonly end in _H. Normalize the exceptions. Macros should be ALL_CAPS. Normalize the exception. Done with scripts/clean-header-guards.pl. include/hw/xen/interface/ and tools/virtiofsd/ left alone, because these were imported from Xen and libfuse respectively. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220506134911.2856099-3-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-11Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220506134911.2856099-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Change to generated file ebpf/rss.bpf.skeleton.h backed out]
2022-03-08hw/i2c: Added linear mode translation for pmbus devicesShengtan Mao
Signed-off-by: Shengtan Mao <stmao@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-7-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/i2c: pmbus: fix error returns and guard against out of range accessesTitus Rwantare
Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-3-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/i2c: pmbus: add registersTitus Rwantare
- add the VOUT_MIN and STATUS_MFR registers Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-2-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-10-12aspeed/i2c: QOMify AspeedI2CBusCédric Le Goater
Introduce an AspeedI2CBus SysBusDevice model and attach the associated memory region and IRQ to the newly instantiated objects. Before this change, the I2C bus IRQs were all attached to the SysBusDevice model of the I2C controller. Adapt the AST2600 SoC realize routine to take into account this change. Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-07-08hw/i2c: add support for PMBusTitus Rwantare
QEMU has support for SMBus devices, and PMBus is a more specific implementation of SMBus. The additions made in this commit makes it easier to add new PMBus devices to QEMU. https://pmbus.org/specification-archives/ Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-2-titusr@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Introduce i2c_start_recv() and i2c_start_send()Philippe Mathieu-Daudé
To ease reviewing code using the I2C bus API, introduce the i2c_start_recv() and i2c_start_send() helpers which don't take the confusing 'is_recv' boolean argument. Use these new helpers in the SMBus / AUX bus models. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Make i2c_start_transfer() direction argument a booleanBALATON Zoltan
Make the argument representing the direction of the transfer a boolean type. Rename the boolean argument as 'is_recv' to match i2c_recv_send(). Document the function prototype. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20200621145235.9E241745712@zero.eik.bme.hu> [PMD: Split patch, added docstring] Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()Philippe Mathieu-Daudé
Other functions from I2C slave API are named "i2c_slave_XXX()". Follow that pattern with set_address(). Add docstring along. No logical change. Patch created mechanically using: $ sed -i s/i2c_set_slave_address/i2c_slave_set_address/ \ $(git grep -l i2c_set_slave_address) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Remove confusing i2c_send_recv()Philippe Mathieu-Daudé
We replaced all the i2c_send_recv() calls by the clearer i2c_recv() and i2c_send(), so we can remove this confusing API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/input/lm832x: Move lm832x_key_event() declaration to "lm832x.h"Philippe Mathieu-Daudé
lm832x_key_event() is specific go LM832x devices, not to the I2C bus API. Move it out of "i2c.h" to a new header. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-04-15hw/i2c: add pca954x i2c-mux switchPatrick Venture
The pca954x is an i2c mux, and this adds support for two variants of this device: the pca9546 and pca9548. This device is very common on BMCs to route a different channel to each PCIe i2c bus downstream from the BMC. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Message-Id: <20210412194522.664594-5-venture@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-04-15hw/i2c: move search to i2c_scan_bus methodPatrick Venture
Moves the search for matching devices on an i2c bus into a separate method. This allows for an object that owns an I2CBus can avoid duplicating this method. Tested: A BMC firmware was booted to userspace and i2c devices were detected. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-Id: <20210412194522.664594-4-venture@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-04-15hw/i2c: add match method for device searchPatrick Venture
At the start of an i2c transaction, the i2c bus searches its list of children to identify which devices correspond to the address (or broadcast). Now the I2CSlave device has a method "match" that encapsulates the lookup behavior. This allows the behavior to be changed to support devices, such as i2c muxes. Tested: A BMC firmware was booted to userspace and i2c devices were detected. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-Id: <20210412194522.664594-3-venture@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-04-15hw/i2c: name I2CNode list in I2CBusPatrick Venture
To enable passing the current_devs field as a parameter, we need to use a named struct type. Tested: BMC firmware with i2c devices booted to userspace. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210412194522.664594-2-venture@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-02-16hw/i2c: Implement NPCM7XX SMBus Module FIFO ModeHao Wu
This patch implements the FIFO mode of the SMBus module. In FIFO, the user transmits or receives at most 16 bytes at a time. The FIFO mode allows the module to transmit large amount of data faster than single byte mode. Since we only added the device in a patch that is only a few commits away in the same patch set. We do not increase the VMstate version number in this special case. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-6-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16hw/i2c: Implement NPCM7XX SMBus Module Single ModeHao Wu
This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18qom: Remove module_obj_name parameter from OBJECT_DECLARE* macrosEduardo Habkost
One of the goals of having less boilerplate on QOM declarations is to avoid human error. Requiring an extra argument that is never used is an opportunity for mistakes. Remove the unused argument from OBJECT_DECLARE_TYPE and OBJECT_DECLARE_SIMPLE_TYPE. Coccinelle patch used to convert all users of the macros: @@ declarer name OBJECT_DECLARE_TYPE; identifier InstanceType, ClassType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_TYPE(InstanceType, ClassType, - lowercase, UPPERCASE); @@ declarer name OBJECT_DECLARE_SIMPLE_TYPE; identifier InstanceType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_SIMPLE_TYPE(InstanceType, - lowercase, UPPERCASE); Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200916182519.415636-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use OBJECT_DECLARE_TYPE where possibleEduardo Habkost
Replace DECLARE_OBJ_CHECKERS with OBJECT_DECLARE_TYPE where the typedefs can be safely removed. Generated running: $ ./scripts/codeconverter/converter.py -i \ --pattern=DeclareObjCheckers $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200831210740.126168-16-ehabkost@redhat.com> Message-Id: <20200831210740.126168-17-ehabkost@redhat.com> Message-Id: <20200831210740.126168-18-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-19 22:28:23 +0000