aboutsummaryrefslogtreecommitdiff
path: root/include/hw/hyperv
AgeCommit message (Collapse)Author
2022-05-30hw/hyperv/vmbus: Remove unused vmbus_load/save_req()Philippe Mathieu-Daudé
vmbus_save_req() and vmbus_load_req() are not used. Remove them to avoid maintaining dead code. This essentially reverts commit 4dd8a7064b8a6527f99a62be11 ("vmbus: add infrastructure to save/load vmbus requests"). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211106134155.582312-2-philmd@redhat.com> [MSS: Remove also corresponding variables, which are now unused] Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
2022-04-06hyperv: Add support to process syndbg commandsJon Doron
SynDbg commands can come from two different flows: 1. Hypercalls, in this mode the data being sent is fully encapsulated network packets. 2. SynDbg specific MSRs, in this mode only the data that needs to be transfered is passed. Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220216102500.692781-4-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06hyperv: Add definitions for syndbgJon Doron
Add all required definitions for hyperv synthetic debugger interface. Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220216102500.692781-3-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18qom: Remove module_obj_name parameter from OBJECT_DECLARE* macrosEduardo Habkost
One of the goals of having less boilerplate on QOM declarations is to avoid human error. Requiring an extra argument that is never used is an opportunity for mistakes. Remove the unused argument from OBJECT_DECLARE_TYPE and OBJECT_DECLARE_SIMPLE_TYPE. Coccinelle patch used to convert all users of the macros: @@ declarer name OBJECT_DECLARE_TYPE; identifier InstanceType, ClassType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_TYPE(InstanceType, ClassType, - lowercase, UPPERCASE); @@ declarer name OBJECT_DECLARE_SIMPLE_TYPE; identifier InstanceType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_SIMPLE_TYPE(InstanceType, - lowercase, UPPERCASE); Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200916182519.415636-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use OBJECT_DECLARE_TYPE where possibleEduardo Habkost
Replace DECLARE_OBJ_CHECKERS with OBJECT_DECLARE_TYPE where the typedefs can be safely removed. Generated running: $ ./scripts/codeconverter/converter.py -i \ --pattern=DeclareObjCheckers $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200831210740.126168-16-ehabkost@redhat.com> Message-Id: <20200831210740.126168-17-ehabkost@redhat.com> Message-Id: <20200831210740.126168-18-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27vmbus: Move QOM macros to vmbus.hEduardo Habkost
Move all declarations related to TYPE_VMBUS to the same place in vmbus.h. This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-35-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-06-26hyperv: vmbus: Remove the 2nd IRQJon Doron
It seems like Windows does not really require 2 IRQs to have a functioning VMBus. Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200617160904.681845-2-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10vmbus: add infrastructure to save/load vmbus requestsJon Doron
This can be allow to include controller-specific data while saving/loading in-flight scsi requests of the vmbus scsi controller. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-7-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10i386: Hyper-V VMBus ACPI DSDT entryJon Doron
Guest OS uses ACPI to discover VMBus presence. Add a corresponding entry to DSDT in case VMBus has been enabled. Experimentally Windows guests were found to require this entry to include two IRQ resources. They seem to never be used but they still have to be there. Make IRQ numbers user-configurable via corresponding properties; use 7 and 13 by default. Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-6-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10vmbus: vmbus implementationJon Doron
Add the VMBus infrastructure -- bus, devices, root bridge, vmbus state machine, vmbus channel interactions, etc. VMBus is a collection of technologies. At its lowest layer, it's a message passing and signaling mechanism, allowing efficient passing of messages to and from guest VMs. A layer higher, it's a mechanism for defining channels of communication, where each channel is tagged with a type (which implies a protocol) and a instance ID. A layer higher than that, it's a bus driver, serving as the basis of device enumeration within a VM, where a channel can optionally be exposed as a paravirtual device. When a server-side (paravirtual back-end) component wishes to offer a channel to a guest VM, it does so by specifying a channel type, a mode, and an instance ID. VMBus then exposes this in the guest. More information about VMBus can be found in the file vmbuskernelmodeclientlibapi.h in Microsoft's WDK. TODO: - split into smaller palatable pieces - more comments - check and handle corner cases Kudos to Evgeny Yakovlev (formerly eyakovlev@virtuozzo.com) and Andrey Smetatin (formerly asmetanin@virtuozzo.com) for research and prototyping. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-4-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10vmbus: add vmbus protocol definitionsJon Doron
Add a header with data structures and constants used in Hyper-V VMBus hypervisor <-> guest interactions. Based on the respective stuff from Linux kernel. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-3-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10hyperv: expose API to determine if synic is enabledJon Doron
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-2-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: process POST_MESSAGE hypercallRoman Kagan
Add handling of POST_MESSAGE hypercall. For that, add an interface to regsiter a handler for the messages arrived from the guest on a particular connection id (IOW set up a message connection in Hyper-V speak). Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-10-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: process SIGNAL_EVENT hypercallRoman Kagan
Add handling of SIGNAL_EVENT hypercall. For that, provide an interface to associate an EventNotifier with an event connection number, so that it's signaled when the SIGNAL_EVENT hypercall with the matching connection ID is called by the guest. Support for using KVM functionality for this will be added in a followup patch. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-8-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: add synic event flag signalingRoman Kagan
Add infrastructure to signal SynIC event flags by atomically setting the corresponding bit in the event flags page and firing a SINT if necessary. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-7-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: add synic message deliveryRoman Kagan
Add infrastructure to deliver SynIC messages to the SynIC message page. Note that KVM may also want to deliver (SynIC timer) messages to the same message slot. The problem is that the access to a SynIC message slot is controlled by the value of its .msg_type field which indicates if the slot is being owned by the hypervisor (zero) or by the guest (non-zero). This leaves no room for synchronizing multiple concurrent producers. The simplest way to deal with this for both KVM and QEMU is to only deliver messages in the vcpu thread. KVM already does this; this patch makes it for QEMU, too. Specifically, - add a function for posting messages, which only copies the message into the staging buffer if its free, and schedules a work on the corresponding vcpu to actually deliver it to the guest slot; - instead of a sint ack callback, set up the sint route with a message status callback. This function is called in a bh whenever there are updates to the message slot status: either the vcpu made definitive progress delivering the message from the staging buffer (succeeded or failed) or the guest issued EOM; the status is passed as an argument to the callback. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-6-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: qom-ify SynICRoman Kagan
Make Hyper-V SynIC a device which is attached as a child to a CPU. For now it only makes SynIC visibile in the qom hierarchy, and maintains its internal fields in sync with the respecitve msrs of the parent cpu (the fields will be used in followup patches). Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: factor out arch-independent API into hw/hypervRoman Kagan
A significant part of hyperv.c is not actually tied to x86, and can be moved to hw/. This will allow to maintain most of Hyper-V and VMBus target-independent, and to avoid conflicts with inclusion of arch-specific headers down the road in VMBus implementation. Also this stuff can now be opt-out with CONFIG_HYPERV. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: split hyperv-proto.h into x86 and arch-independent partsRoman Kagan
Some parts of the Hyper-V hypervisor-guest interface appear to be target-independent, so move them into a proper header. Not that Hyper-V ARM64 emulation is around the corner but it seems more conveninent to have most of Hyper-V and VMBus target-independent, and allows to avoid conflicts with inclusion of arch-specific headers down the road in VMBus implementation. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-2-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 16:22:32 +0000