aboutsummaryrefslogtreecommitdiff
path: root/include/hw/cxl
AgeCommit message (Collapse)Author
2023-11-15hw/cxl: spelling fixes: limitaions, potentialy, intializedMichael Tokarev
Fixes: 388d6b574e28 "hw/cxl: Use switch statements for read and write of cachemem registers" Fixes: 3314efd276ad "hw/cxl/mbox: Add Physical Switch Identify command." Fixes: 004e3a93b814 "hw/cxl: Add tunneled command support to mailbox for switch cci." Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-11-07hw/cxl: Add tunneled command support to mailbox for switch cci.Jonathan Cameron
This implementation of tunneling makes the choice that our Type 3 device is a Logical Device (LD) of a Multi-Logical Device (MLD) that just happens to only have one LD for now. Tunneling is supported from a Switch Mailbox CCI (and shortly via MCTP over I2C connected to the switch MCTP CCI) via an outer level to the FM owned LD in the MLD Type 3 device. From there an inner tunnel may be used to access particular LDs. Protocol wise, the following is what happens in a real system but we don't emulate the transports - just the destinations and the payloads. ( Host -> Switch Mailbox CCI - in band FM-API mailbox command or Host -> Switch MCTP CCI - MCTP over I2C using the CXL FM-API MCTP Binding. ) then (if a tunnel command) Switch -> Type 3 FM Owned LD - MCTP over PCI VDM using the CXL FM-API binding (addressed by switch port) then (if unwrapped command also a tunnel command) Type 3 FM Owned LD to LD0 via internal transport (addressed by LD number) or (added shortly) Host to Type 3 FM Owned MCTP CCI - MCTP over I2C using the CXL FM-API MCTP Binding. then (if unwrapped comand is a tunnel comamnd) Type 3 FM Owned LD to LD0 via internal transport. (addressed by LD number) It is worth noting that the tunneling commands over PCI VDM presumably use the appropriate MCTP binding depending on opcode. This may be the CXL FMAPI binding or the CXL Memory Device Binding. Additional commands will need to be added to make this useful beyond testing the tunneling works. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-18-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Add support for device sanitationDavidlohr Bueso
Make use of the background operations through the sanitize command, per CXL 3.0 specs. Traditionally run times can be rather long, depending on the size of the media. Estimate times based on: https://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-14-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Wire up interrupts for background completionDavidlohr Bueso
Notify when the background operation is done. Note that for now background commands are only supported on the main Type 3 mailbox. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-13-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Add support for background operationsDavidlohr Bueso
Support background commands in the mailbox, and update cmd_infostat_bg_op_sts() accordingly. This patch does not implement mbox interrupts upon completion, so the kernel driver must rely on polling to know when the operation is done. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-12-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Add Physical Switch Identify command.Jonathan Cameron
Enable it for the switch CCI. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-9-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Add a switch mailbox CCI functionJonathan Cameron
CXL switch CCIs were added in CXL r3.0. They are a PCI function, identified by class code that provides a CXL mailbox (identical to that previously defined for CXL type 3 memory devices) over which various FM-API commands may be used. Whilst the intent of this feature is enable switch control from a BMC attached to a switch upstream port, it is also useful to allow emulation of this feature on the upstream port connected to a host using the CXL devices as this greatly simplifies testing. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Generalize the CCI command processingJonathan Cameron
By moving the parts of the mailbox command handling that are CCI type specific out to the caller, make the main handling code generic. Rename it to cxl_process_cci_message() to reflect this new generality. Change the type3 mailbox handling (reused shortly for the switch mailbox CCI) to take a snapshot of the mailbox input data rather than operating on it in place. This reduces the chance of bugs due to aliasing going forwars. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Pull the CCI definition out of the CXLDeviceStateJonathan Cameron
Enables having multiple CCIs per devices. Each CCI (mailbox) has it's own state and command list, so they can't share a single structure. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-4-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Split mailbox command payload into separate input and outputJonathan Cameron
New CCI types that will be supported shortly do not have a single buffer used in both directions. As such, split it up. To avoid the complexities of implementing all commands to handle potential aliasing, take a copy of the input before use. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-3-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Pull the payload out of struct cxl_cmd and make instances constantJonathan Cameron
Putting the pointer in the structure for command handling puts a single variable element inside an otherwise constant structure. Move it out as a directly passed variable and take the cxl_cmd structures constant. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023160806.13206-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Line length reductionsJonathan Cameron
Michael Tsirkin observed that there were some unnecessarily long lines in the CXL code in a recent review. This patch is intended to rectify that where it does not hurt readability. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023140210.3089-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: CXLDVSECPortExtensions renamed to CXLDVSECPortExtJonathan Cameron
Done to reduce line lengths where this is used. Ext seems sufficiently obvious that it need not be spelt out fully. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023140210.3089-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04hw/cxl: Support 4 HDM decoders at all levels of topologyJonathan Cameron
Support these decoders in CXL host bridges (pxb-cxl), CXL Switch USP and CXL Type 3 end points. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230913132523.29780-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04hw/cxl: Fix and use same calculation for HDM decoder block size everywhereJonathan Cameron
In order to avoid having the size of the per HDM decoder register block repeated in lots of places, create the register definitions for HDM decoder 1 and use the offset between the first registers in HDM decoder 0 and HDM decoder 1 to establish the offset. Calculate in each function as this is more obvious and leads to shorter line lengths than a single #define which would need a long name to be specific enough. Note that the code currently only supports one decoder, so the bugs this fixes don't actually affect anything. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230913132523.29780-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04hw/cxl: Add utility functions decoder interleave ways and target count.Jonathan Cameron
As an encoded version of these key configuration parameters is available in a register, provide functions to extract it again so as to avoid the need for duplicating the storage. Whilst here update the _enc() function to include additional values as defined in the CXL 3.0 specification. Whilst they are not currently used in the emulation, they may be in future and it is easier to compare with the specification if all values are covered. Add a spec reference for cxl_interleave_ways_enc() for consistency with the target count equivalent (and because it's nice to know where the magic numbers come from). Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230913132523.29780-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .cJonathan Cameron
There is no strong justification for keeping these in the header so push them down into the associated cxl-component-utils.c file. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230913132523.29780-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-09-21hw/cxl: Fix out of bound array accessDmitry Frolov
According to cxl_interleave_ways_enc(), fw->num_targets is allowed to be up to 16. This also corresponds to CXL r3.0 spec. So, the fw->target_hbs[] array is iterated from 0 to 15. But it is statically declared of length 8. Thus, out of bound array access may occur. Fixes: c28db9e000 ("hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEV") Signed-off-by: Dmitry Frolov <frolov@swemel.ru> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Link: https://lore.kernel.org/r/20230913101055.754709-1-frolov@swemel.ru Cc: qemu-stable@nongnu.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-09-21hw/cxl/cxl_device: Replace magic number in CXLError definitionFan Ni
Replace the magic number 32 with CXL_RAS_ERR_HEADER_NUM for better code readability and maintainability. Signed-off-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-09-08include/: spelling fixesMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2023-06-23hw/cxl/events: Add injection of Memory Module EventsJonathan Cameron
These events include a copy of the device health information at the time of the event. Actually using the emulated device health would require a lot of controls to manipulate that state. Given the aim of this injection code is to just test the flows when events occur, inject the contents of the device health state as well. Future work may add more sophisticate device health emulation including direct generation of these records when events occur (such as a temperature threshold being crossed). That does not reduce the usefulness of this more basic generation of the events. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-8-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl/events: Add injection of DRAM eventsJonathan Cameron
Defined in CXL r3.0 8.2.9.2.1.2 DRAM Event Record, this event provides information related to DRAM devices. Example injection command in QMP: { "execute": "cxl-inject-dram-event", "arguments": { "path": "/machine/peripheral/cxl-mem0", "log": "informational", "flags": 1, "dpa": 1000, "descriptor": 3, "type": 3, "transaction-type": 192, "channel": 3, "rank": 17, "nibble-mask": 37421234, "bank-group": 7, "bank": 11, "row": 2, "column": 77, "correction-mask": [33, 44, 55,66] }} Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl/events: Add injection of General Media EventsIra Weiny
To facilitate testing provide a QMP command to inject a general media event. The event can be added to the log specified. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl/events: Add event interrupt supportIra Weiny
Replace the stubbed out CXL Get/Set Event interrupt policy mailbox commands. Enable those commands to control interrupts for each of the event log types. Skip the standard input mailbox length on the Set command due to DCD being optional. Perform the checks separately. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl/events: Wire up get/clear event mailbox commandsIra Weiny
CXL testing is benefited from an artificial event log injection mechanism. Add an event log infrastructure to insert, get, and clear events from the various logs available on a device. Replace the stubbed out CXL Get/Clear Event mailbox commands with commands that operate on the new infrastructure. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: Move CXLRetCode definition to cxl_device.hJonathan Cameron
Following patches will need access to the mailbox return code type so move it to the header. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl/events: Add event status registerIra Weiny
The device status register block was defined. However, there were no individual registers nor any data wired up. Define the event status register [CXL 3.0; 8.2.8.3.1] as part of the device status register block. Wire up the register and initialize the event status for each log. To support CXL 3.0 the version of the device status register block needs to be 2. Change the macro to allow for setting the version. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: Add clear poison mailbox command support.Jonathan Cameron
Current implementation is very simple so many of the corner cases do not exist (e.g. fragmenting larger poison list entries) Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230526170010.574-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: QMP based poison injection supportJonathan Cameron
Inject poison using QMP command cxl-inject-poison to add an entry to the poison list. For now, the poison is not returned CXL.mem reads, but only via the mailbox command Get Poison List. So a normal memory read to an address that is on the poison list will not yet result in a synchronous exception (and similar for partial cacheline writes). That is left for a future patch. See CXL rev 3.0, sec 8.2.9.8.4.1 Get Poison list (Opcode 4300h) Kernel patches to use this interface here: https://lore.kernel.org/linux-cxl/cover.1665606782.git.alison.schofield@intel.com/ To inject poison using QMP (telnet to the QMP port) { "execute": "qmp_capabilities" } { "execute": "cxl-inject-poison", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "start": 2048, "length": 256 } } Adjusted to select a device on your machine. Note that the poison list supported is kept short enough to avoid the complexity of state machine that is needed to handle the MORE flag. Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230526170010.574-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: Introduce cxl_device_get_timestamp() utility functionIra Weiny
There are new users of this functionality coming shortly so factor it out from the GET_TIMESTAMP mailbox command handling. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230423162013.4535-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)Gregory Price
This commit enables each CXL Type-3 device to contain one volatile memory region and one persistent region. Two new properties have been added to cxl-type3 device initialization: [volatile-memdev] and [persistent-memdev] The existing [memdev] property has been deprecated and will default the memory region to a persistent memory region (although a user may assign the region to a ram or file backed region). It cannot be used in combination with the new [persistent-memdev] property. Partitioning volatile memory from persistent memory is not yet supported. Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info. Signed-off-by: Gregory Price <gregory.price@memverge.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-24hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEVJonathan Cameron
Previously, PXB_CXL_DEVICE, PXB_PCIE_DEVICE and PXB_DEVICE all have PCI_DEVICE as their direct parent but share a common state struct PXBDev. convert_to_pxb() is used to get the PXBDev instance from which ever of these types it is called on. This patch switches to an explicit hierarchy based on shared functionality. To allow use of OBJECT_DECLARE_SIMPLE_TYPE() whilst minimizing code changes, all types are renamed to have the postfix _DEV rather than _DEVICE. The new heirarchy has PXB_CXL_DEV with parent PXB_PCIE_DEV which in turn has parent PXB_DEV which continues to have parent PCI_DEVICE. This allows simple use of PXB_DEV() etc rather than a custom function + removal of duplicated properties and moving the CXL specific elements out of struct PXBDev. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230420142750.6950-3-Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pxb-cxl: Support passthrough HDM Decoders unless overriddenJonathan Cameron
The CXL r3.0 specification allows for there to be no HDM decoders on CXL Host Bridges if they have only a single root port. Instead, all accesses directed to the host bridge (as specified in CXL Fixed Memory Windows) are assumed to be routed to the single root port. Linux currently assumes this implementation choice. So to simplify testing, make QEMU emulation also default to no HDM decoders under these particular circumstances, but provide a hdm_for_passthrough boolean option to have HDM decoders as previously. Technically this is breaking backwards compatibility, but given the only known software stack used with the QEMU emulation is the Linux kernel and this configuration did not work before this change, there are unlikely to be any complaints that it now works. The option is retained to allow testing of software that does allow for these HDM decoders to exist, once someone writes it. Reported-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -- v2: Pick up and fix typo in tag from Fan Ni Message-Id: <20230227153128.8164-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/mem/cxl_type3: Add CXL RAS Error Injection Support.Jonathan Cameron
CXL uses PCI AER Internal errors to signal to the host that an error has occurred. The host can then read more detailed status from the CXL RAS capability. For uncorrectable errors: support multiple injection in one operation as this is needed to reliably test multiple header logging support in an OS. The equivalent feature doesn't exist for correctable errors, so only one error need be injected at a time. Note: - Header content needs to be manually specified in a fashion that matches the specification for what can be in the header for each error type. Injection via QMP: { "execute": "qmp_capabilities" } ... { "execute": "cxl-inject-uncorrectable-errors", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "errors": [ { "type": "cache-address-parity", "header": [ 3, 4] }, { "type": "cache-data-parity", "header": [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31] }, { "type": "internal", "header": [ 1, 2, 4] } ] }} ... { "execute": "cxl-inject-correctable-error", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "type": "physical" } } Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230302133709.30373-9-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-02hw/cxl/mailbox: Use new UUID network order define for cel_uuidIra Weiny
The cel_uuid was programatically generated previously because there was no static initializer for network order UUIDs. Use the new network order initializer for cel_uuid. Adjust cxl_initialize_mailbox() because it can't fail now. Update specification reference. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Gregory Price <gregory.price@memverge.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230206172816.8201-11-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-08hw/cxl: Clean up includesMarkus Armbruster
This commit was created with scripts/clean-includes. All .c should include qemu/osdep.h first. The script performs three related cleanups: * Ensure .c files include qemu/osdep.h first. * Including it in a .h is redundant, since the .c already includes it. Drop such inclusions. * Likewise, including headers qemu/osdep.h includes is redundant. Drop these, too. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20230202133830.2152150-8-armbru@redhat.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08include/hw/cxl: Break inclusion loop cxl_pci.h and cxl_cdat_hMarkus Armbruster
hw/cxl/cxl_pci.h and hw/cxl/cxl_cdat.h include each other. The former doesn't actually need the latter, so drop that inclusion to break the loop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-8-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08include/hw/pci: Split pci_device.h off pci.hMarkus Armbruster
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the header don't actually need them. Similar structs live in their own headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h, PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and PCIESlot in pcie_port.h. Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with the code that needs them. Adjust include directives. This also enables the next commit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-6-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08include/hw/cxl: Include hw/cxl/*.h where neededMarkus Armbruster
hw/cxl/cxl_component.h needs CDATObject from hw/cxl/cxl_cdat.h. hw/cxl/cxl_device.h needs CXLComponentState from hw/cxl/cxl_component.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20221222100330.380143-4-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08include/hw/cxl: Move typedef PXBDev to cxl.h, and put it to useMarkus Armbruster
hw/cxl/cxl.h uses the PXBDev structure tag instead of the typedef name. The typedef name is defined in hw/pci/pci_bridge.h. Its inclusion was dropped in the previous commit to break an inclusion loop. Move the typedef to hw/cxl/cxl.h, and use it there. Delete an extra typedef in hw/pci-bridge/pci_expander_bridge.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-3-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08include/hw/pci: Break inclusion loop pci_bridge.h and cxl.hMarkus Armbruster
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other. Fortunately, breaking the loop is merely a matter of deleting unnecessary includes from headers, and adding them back in places where they are now missing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-2-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07hw/pci-bridge/cxl-upstream: Add a CDAT table access DOEJonathan Cameron
This Data Object Exchange Mailbox allows software to query the latency and bandwidth between ports on the switch. For now only provide information on routes between the upstream port and each downstream port (not p2p). Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -- Changes since v8: Mostly to match the type 3 equivalent - Move enum out of function and give it a more descriptive namespace. Message-Id: <20221014151045.24781-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07hw/cxl/cdat: CXL CDAT Data Object Exchange implementationHuai-Cheng Kuo
The Data Object Exchange implementation of CXL Coherent Device Attribute Table (CDAT). This implementation is referring to "Coherent Device Attribute Table Specification, Rev. 1.03, July. 2022" and "Compute Express Link Specification, Rev. 3.0, July. 2022" This patch adds core support that will be shared by both end-points and switch port emulation. Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20221014151045.24781-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09mem/cxl-type3: Add sn option to provide serial number for PCI ecapJonathan Cameron
The Device Serial Number Extended Capability PCI r6.0 sec 7.9.3 provides a standard way to provide a device serial number as an IEEE defined 64-bit extended unique identifier EUI-64. CXL 2.0 section 8.1.12.2 Memory Device PCIe Capabilities and Extended Capabilities requires this to be used to uniquely identify CXL memory devices. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220923161835.9805-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ben Widawsky <bwidawsk@kernel.org>
2022-07-26hw/cxl: Fix size of constant in interleave granularity function.Jonathan Cameron
Whilst the interleave granularity is always small enough that this isn't a real problem (much less than 4GiB) let's change the constant to ULL to fix the coverity warning. Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: 829de299d1 ("hw/cxl/component: Add utils for interleave parameter encoding/decoding") Fixes: Coverity CID 1488868 Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220701132300.2264-4-Jonathan.Cameron@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-16pci-bridge/cxl_upstream: Add a CXL switch upstream portJonathan Cameron
An initial simple upstream port emulation to allow the creation of CXL switches. The Device ID has been allocated for this use. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220616145126.8002-2-Jonathan.Cameron@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.Jonathan Cameron
As the CXLState will no long be accessible via MachineState at time of PXB_CXL realization, come back later from the machine specific code to fill in the missing memory region setup. Only at this stage is it possible to check if cxl=on, so that check is moved to this later point. Note that for multiple host bridges, the allocation order of the register spaces is changed. This will be reflected in ACPI CEDT. Stubs are added to handle case of CONFIG_PXB=n for machines that call these functions. The bus walking logic is common to all machines so add a utility function + stub to cxl-host*. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Message-Id: <20220608145440.26106-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.cJonathan Cameron
Whilst here take the oportunity to shorten the function name. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Message-Id: <20220608145440.26106-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09hw/cxl: Make the CXL fixed memory window setup a machine parameter.Jonathan Cameron
Paolo Bonzini requested this change to simplify the ongoing effort to allow machine setup entirely via RPC. Includes shortening the command line form cxl-fixed-memory-window to cxl-fmw as the command lines are extremely long even with this change. The json change is needed to ensure that there is a CXLFixedMemoryWindowOptionsList even though the actual element in the json is never used. Similar to existing SgxEpcProperties. Update qemu-options.hx to reflect that this is now a -machine parameter. The bulk of -M / -machine parameters are documented under machine, so use that in preference to M. Update cxl-test and bios-tables-test to reflect new parameters. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13cxl/cxl-host: Add memops for CFMWS region.Jonathan Cameron
These memops perform interleave decoding, walking down the CXL topology from CFMWS described host interleave decoder via CXL host bridge HDM decoders, through the CXL root ports and finally call CXL type 3 specific read and write functions. Note that, whilst functional the current implementation does not support: * switches * multiple HDM decoders at a given level. * unaligned accesses across the interleave boundaries Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20220429144110.25167-34-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 04:20:01 +0000