aboutsummaryrefslogtreecommitdiff
path: root/include/hw/arm/virt.h
AgeCommit message (Collapse)Author
2018-03-23mach-virt: Set VM's SMBIOS system version to mc->nameWei Huang
Instead of using "1.0" as the system version of SMBIOS, we should use mc->name for mach-virt machine type to be consistent other architectures. With this patch, "dmidecode -t 1" (e.g., "-M virt-2.12,accel=kvm") will show: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: virt-2.12 Serial Number: Not Specified ... instead of: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: 1.0 Serial Number: Not Specified ... For backward compatibility, we allow older machine types to keep "1.0" as the default system version. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180322212318.7182-1-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28hw/arm/virt: Add a user option to disallow ITS instantiationEric Auger
In 2.9 ITS will block save/restore and migration use cases. As such, let's introduce a user option that allows to turn its instantiation off, along with GICv3. With the "its" option turned false, migration will be possible, obviously at the expense of MSI support (with GICv3). Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1487681108-14452-1-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20hw/arm/virt: Add board property to enable EL2Peter Maydell
Add a board level property to the virt board which will enable EL2 on the CPU if the user asks for it. The default is not to provide EL2. If EL2 is enabled then we will use SMC as our PSCI conduit, and report the virtualization support in the GICv3 device tree node and the ACPI tables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1483977924-14522-19-git-send-email-peter.maydell@linaro.org
2017-01-20hw/arm/virt: Support using SMC for PSCIPeter Maydell
If we are giving the guest a CPU with EL2, it is likely to want to use the HVC instruction itself, for instance for providing PSCI to inner guest VMs. This makes using HVC as the PSCI conduit for the outer QEMU a bad idea. We will want to use SMC instead is this case: this makes sense because QEMU's PSCI implementation is effectively an emulation of functionality provided by EL3 firmware. Add code to support selecting the PSCI conduit to use, rather than hardcoding use of HVC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1483977924-14522-15-git-send-email-peter.maydell@linaro.org
2017-01-20hw/arm/virt: Wire VIRQ, VFIQ, maintenance irq lines from GIC to CPUPeter Maydell
Wire the new VIRQ, VFIQ and maintenance interrupt lines from the GIC to each CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1483977924-14522-5-git-send-email-peter.maydell@linaro.org
2017-01-09hw/arm/virt: remove VirtGuestInfoAndrew Jones
by moving VirtGuestInfo.fw_cfg to VirtMachineState. This is the mach-virt equivalent of "pc: Move PcGuestInfo.fw_cfg to PCMachineState" and "pc: Eliminate PcGuestInfo struct" combined. Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-14-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt-acpi-build: remove redundant members from VirtGuestInfoAndrew Jones
Now that we pass VirtMachineState, and guest-info is just part of that state, we can remove all the redundant members and access the VirtMachineState directly. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-12-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: pass VirtMachineState instead of VirtGuestInfoAndrew Jones
Only two functions take VirtGuestInfo parameters. Now that guest-info is part of VirtMachineState, and VirtMachineState is defined in the virt header, pass that instead. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-11-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: move VirtMachineState/Class to virt.hAndrew Jones
In preparation to share more Virt machine state than just guest-info with other mach-virt source files, move the State and Class structures to virt.h Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-10-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: remove include/hw/arm/virt-acpi-build.hAndrew Jones
include/hw/arm/virt-acpi-build.h is only used for VirtGuestInfo, which doesn't even necessarily have to be ACPI specific. Move VirtGuestInfo to include/hw/arm/virt.h, allowing us to remove include/hw/arm/virt-acpi-build.h, and to prepare for even more code motion. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-9-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: Add PMU node for virt machineShannon Zhao
Add a virtual PMU device for virt machine while use PPI 7 for PMU overflow interrupt number. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04hw/arm/virt: Provide a secure-only RAM if booting in Secure modePeter Maydell
If we're booting in Secure mode, provide a secure-only RAM (just 16MB) so that secure firmware has somewhere to run from that won't be accessible to the Non-secure guest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455288361-30117-2-git-send-email-peter.maydell@linaro.org
2016-01-21hw/arm/virt: add secure memory region and UARTPeter Maydell
Add a secure memory region to the virt board, which is the same as the nonsecure memory region except that it also has a secure-only UART in it. This is only created if the board is started with the '-machine secure=on' property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-12-17ARM: Virt: Add a GPIO controllerShannon Zhao
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for powerdown, hotplug evnets. Add a GPIO controller in machine virt, to support powerdown, maybe can be used for cpu hotplug. And here we use pl061. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Wei Huang <wei@redhat.com> Tested-by: Wei Huang <wei@redhat.com> Message-id: 1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-24hw/arm/virt: Add gic-version option to virt machinePavel Fedin
Add gic_version to VirtMachineState, set it to value of the option and pass it around where necessary. Instantiate devices and fdt nodes according to the choice. max_cpus for virt machine increased to 123 (calculated from redistributor space available in the memory map). GICv2 compatibility check happens inside arm_gic_common_realize(). ITS region is added to the memory map too, however currently it not used, just reserved. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Tested-by: Ashok kumar <ashoks@broadcom.com> [PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07hw/arm/virt: Add high MMIO PCI region, 512G in sizePavel Fedin
This large region is necessary for some devices like ivshmem and video cards 32-bit kernels can be built without LPAE support. In this case such a kernel will not be able to use PCI controller which has windows in high addresses. In order to work around the problem, "highmem" option is introduced. It defaults to on on, but can be manually set to off in order to be able to run those old 32-bit guests. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> [PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02hw/arm/virt: add dynamic sysbus device supportEric Auger
Allows sysbus devices to be instantiated from command line by using -device option. Machvirt creates a platform bus at init. The dynamic sysbus devices are attached to this platform bus device. The platform bus device registers a machine init done notifier whose role will be to bind the dynamic sysbus devices. Indeed dynamic sysbus devices are created after machine init. machvirt also registers a notifier that will build the device tree nodes for the platform bus and its children dynamic sysbus devices. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1433244554-12898-4-git-send-email-eric.auger@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02target-arm: Add the GICv2m to the virt boardChristoffer Dall
Add a GICv2m device to the virt board to enable MSIs on the generic PCI host controller. We allocate 64 SPIs in the IRQ space for now (this can be increased/decreased later) and map the GICv2m right after the GIC in the memory map. Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1432897270-7780-5-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt-acpi-build: Generate GTDT tableShannon Zhao
ACPI v5.1 defines GTDT for ARM devices as a place to describe timer related information in the system. The Arch Timer interrupts must be provided for GTDT. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-11-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt: Record PCIe ranges in MemMapEntry arrayShannon Zhao
To generate ACPI table for PCIe controller, we need the base and size of the PCIe ranges. Record these ranges in MemMapEntry array, then we could share and use them for generating ACPI table. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1432522520-8068-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt: Move common definitions to virt.hShannon Zhao
Move some common definitions to virt.h. These will be used by generating ACPI tables. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>