aboutsummaryrefslogtreecommitdiff
path: root/include/hw/arm/aspeed_soc.h
AgeCommit message (Collapse)Author
2023-10-25hw/arm/aspeed: Move AspeedSoCState::cpu/vic to Aspeed2400SoCStatePhilippe Mathieu-Daudé
The ARM array and VIC peripheral are only used by the 2400 series, remove them from the common AspeedSoCState. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-10-25hw/arm/aspeed: Move AspeedSoCState::a7mpcore to Aspeed2600SoCStatePhilippe Mathieu-Daudé
The v7-A cluster is specific to the Aspeed 2600 series, remove it from the common AspeedSoCState. The ARM cores belong to the MP cluster, but the array is currently used by TYPE_ASPEED2600_SOC. We'll clean that soon, but for now keep it in Aspeed2600SoCState. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-10-25hw/arm/aspeed: Move AspeedSoCState::armv7m to Aspeed10x0SoCStatePhilippe Mathieu-Daudé
The v7-M core is specific to the Aspeed 10x0 series, remove it from the common AspeedSoCState. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-10-25hw/arm/aspeed: Introduce TYPE_ASPEED2400_SOCPhilippe Mathieu-Daudé
TYPE_ASPEED2400_SOC inherits from TYPE_ASPEED_SOC. In few commits we'll add more fields, but to keep review process simple, don't add any yet. TYPE_ASPEED_SOC is common to various Aspeed SoCs, define it in aspeed_soc_common.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-10-25hw/arm/aspeed: Introduce TYPE_ASPEED2600_SOCPhilippe Mathieu-Daudé
TYPE_ASPEED2600_SOC inherits from TYPE_ASPEED_SOC. In few commits we'll add more fields, but to keep review process simple, don't add any yet. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-10-25hw/arm/aspeed: Introduce TYPE_ASPEED10X0_SOCPhilippe Mathieu-Daudé
TYPE_ASPEED10X0_SOC inherits from TYPE_ASPEED_SOC. In few commits we'll add more fields, but to keep review process simple, don't add any yet. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-02aspeed: Introduce a spi_boot region under the SoCCédric Le Goater
The default boot address of the Aspeed SoCs is 0x0. For this reason, the FMC flash device contents are remapped by HW on the first 256MB of the address space. In QEMU, this is currently done in the machine init with the setup of a region alias. Move this code to the SoC and introduce an extra container to prepare ground for the boot ROM region which will overlap the FMC flash remapping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map the secure SRAMPhilippe Mathieu-Daudé
Some SRAM appears to be used by the Secure Boot unit and crypto accelerators. Name it 'secure sram'. Note, the SRAM base address was already present but unused (the 'SBC' index is used for the MMIO peripheral). Interestingly using CFLAGS=-Winitializer-overrides reports: ../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] [ASPEED_DEV_SBC] = 0x7E6F2000, ^~~~~~~~~~ ../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here [ASPEED_DEV_SBC] = 0x79000000, ^~~~~~~~~~ This fixes with Zephyr: uart:~$ rsa test rsa test vector[0]: [00:00:26.156,000] <err> os: ***** BUS FAULT ***** [00:00:26.157,000] <err> os: Precise data bus error [00:00:26.157,000] <err> os: BFAR Address: 0x79000000 [00:00:26.158,000] <err> os: r0/a1: 0x79000000 r1/a2: 0x00000000 r2/a3: 0x00001800 [00:00:26.158,000] <err> os: r3/a4: 0x79001800 r12/ip: 0x00000800 r14/lr: 0x0001098d [00:00:26.158,000] <err> os: xpsr: 0x81000000 [00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc [00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0 [00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart) [00:00:26.165,000] <err> os: Halting system Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: Fixed size of Secure Boot Controller Memory ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Add various unimplemented peripheralsPhilippe Mathieu-Daudé
Based on booting Zephyr demo from [1] running QEMU with '-d unimp' and checking missing devices in [2]. [1] https://github.com/AspeedTech-BMC/zephyr/releases/tag/v00.01.07 [2] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14aspeed: Make aspeed_board_init_flashes publicPeter Delevoryas
Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220705191400.41632-5-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14aspeed: Refactor UART init for multi-SoC machinesPeter Delevoryas
This change moves the code that connects the SoC UART's to serial_hd's to the machine. It makes each UART a proper child member of the SoC, and then allows the machine to selectively initialize the chardev for each UART with a serial_hd. This should preserve backwards compatibility, but also allow multi-SoC boards to completely change the wiring of serial devices from the command line to specific SoC UART's. This also removes the uart-default property from the SoC, since the SoC doesn't need to know what UART is the "default" on the machine anymore. I tested this using the images and commands from the previous refactoring, and another test image for the ast1030: wget https://github.com/facebook/openbmc/releases/download/v2021.49.0/fuji.mtd wget https://github.com/facebook/openbmc/releases/download/v2021.49.0/wedge100.mtd wget https://github.com/peterdelevoryas/OpenBIC/releases/download/oby35-cl-2022.13.01/Y35BCL.elf Fuji uses UART1: qemu-system-arm -machine fuji-bmc \ -drive file=fuji.mtd,format=raw,if=mtd \ -nographic ast2600-evb uses uart-default=UART5: qemu-system-arm -machine ast2600-evb \ -drive file=fuji.mtd,format=raw,if=mtd \ -serial null -serial mon:stdio -display none Wedge100 uses UART3: qemu-system-arm -machine palmetto-bmc \ -drive file=wedge100.mtd,format=raw,if=mtd \ -serial null -serial null -serial null \ -serial mon:stdio -display none AST1030 EVB uses UART5: qemu-system-arm -machine ast1030-evb \ -kernel Y35BCL.elf -nographic Fixes: 6827ff20b2975 ("hw: aspeed: Init all UART's with serial devices") Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220705191400.41632-4-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/misc/aspeed: Add PECI controllerPeter Delevoryas
This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed: Map unimplemented devices in SoC memoryPeter Delevoryas
Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-5-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed: Remove usage of sysbus_mmio_mapPeter Delevoryas
sysbus_mmio_map maps devices into "get_system_memory()". With the new SoC memory attribute, we want to make sure that each device is mapped into the SoC memory. In single SoC machines, the SoC memory is the same as "get_system_memory()", but in multi SoC machines it will be different. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-4-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed: Add memory property to Aspeed SoCPeter Delevoryas
Multi-SoC machines can use this property to specify a memory container for each SoC. Single SoC machines will just specify get_system_memory(). Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed: Set the dram container at the SoC levelCédric Le Goater
Currently, the Aspeed machines allocate a ram container region in which the machine ram region is mapped. See commit ad1a9782186d ("aspeed: add a RAM memory region container"). An extra region is mapped after ram in the ram container to catch invalid access done by FW. That's how FW determines the size of ram. See commit ebe31c0a8ef7 ("aspeed: add a max_ram_size property to the memory controller"). Let's move all the logic under the SoC where it should be. It will also ease the work on multi SoC support. Reviewed-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220623202123.3972977-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25hw: aspeed: Introduce common UART init functionPeter Delevoryas
Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516062328.298336-5-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25hw: aspeed: Add uarts_num SoC attributePeter Delevoryas
AST2400 and AST2500 have 5 UART's, while the AST2600 and AST1030 have 13. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516062328.298336-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25hw: aspeed: Add missing UART'sPeter Delevoryas
This adds the missing UART memory and IRQ mappings for the AST2400, AST2500, AST2600, and AST1030. This also includes the new UART interfaces added in the AST2600 and AST1030 from UART6 to UART13. The addresses and interrupt numbers for these two later chips are identical. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516062328.298336-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25aspeed: Introduce a get_irq AspeedSoCClass methodCédric Le Goater
and make routine aspeed_soc_get_irq() common to all SoCs. This will be useful to share code. Cc: Jamin Lin <jamin_lin@aspeedtech.com> Cc: Peter Delevoryas <pdel@fb.com> Reviewed-by: Peter Delevoryas <pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516055620.2380197-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02aspeed/soc : Add AST1030 supportSteven Lee
The embedded core of AST1030 SoC is ARM Coretex M4. It is hard to be integrated in the common Aspeed Soc framework. We introduce a new ast1030 class with instance_init and realize handlers. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: rename aspeed_ast10xx.c to aspeed_ast10x0.c to match zephyr ] Message-Id: <20220401083850.15266-8-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02aspeed: Add eMMC Boot Controller stubJoel Stanley
Guest code (u-boot) pokes at this on boot. No functionality is required for guest code to work correctly, but it helps to document the region being read from. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220318092211.723938-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-26ast2600: Add Secure Boot Controller modelJoel Stanley
Just a stub that indicates the system has booted in secure boot mode. Used for testing the driver: https://lore.kernel.org/all/20211019080608.283324-1-joel@jms.id.au/ Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: - Fixed typo - Adjusted Copyright dates ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-20hw/arm/aspeed: Add the i3c device to the AST2600 SoCTroy Lee
Add the new i3c device to the AST2600 SoC. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-3-troy_lee@aspeedtech.com [PMM: tidied commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-07Add dummy Aspeed AST2600 Display Port MCU (DPMCU)Troy Lee
AST2600 Display Port MCU introduces 0x18000000~0x1803FFFF as it's memory and io address. If guest machine try to access DPMCU memory, it will cause a fatal error. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211210083034.726610-1-troy_lee@aspeedtech.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-10-12hw/arm: Integrate ADC model into Aspeed SoCAndrew Jeffery
Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20211005052604.1674891-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20hw/arm/aspeed: Allow machine to set UART defaultPeter Delevoryas
When you run QEMU with an Aspeed machine and a single serial device using stdio like this: qemu -machine ast2600-evb -drive ... -serial stdio The guest OS can read and write to the UART5 registers at 0x1E784000 and it will receive from stdin and write to stdout. The Aspeed SoC's have a lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on the board design, may be using any of them as the serial console. (See "stdout-path" in a DTS to check which one is chosen). Most boards, including all of those currently defined in hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds some flexibility for different boards without requiring users to change their command-line invocation of QEMU. I tested this doesn't break existing code by booting an AST2500 OpenBMC image and an AST2600 OpenBMC image, each using UART5 as the console. Then I tested switching the default to UART1 and booting an AST2600 OpenBMC image that uses UART1, and that worked too. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210901153615.2746885-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01aspeed: Integrate HACEJoel Stanley
Add the hash and crypto engine model to the Aspeed socs. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210409000253.1475587-3-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09hw/misc: Model KCS devices in the Aspeed LPC controllerAndrew Jeffery
Keyboard-Controller-Style devices for IPMI purposes are exposed via LPC IO cycles from the BMC to the host. Expose support on the BMC side by implementing the usual MMIO behaviours, and expose the ability to inspect the KCS registers in "host" style by accessing QOM properties associated with each register. The model caters to the IRQ style of both the AST2600 and the earlier SoCs (AST2400 and AST2500). The AST2600 allocates an IRQ for each LPC sub-device, while there is a single IRQ shared across all subdevices on the AST2400 and AST2500. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210302014317.915120-6-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09hw/misc: Add a basic Aspeed LPC controller modelCédric Le Goater
This is a very minimal framework to access registers which are used to configure the AHB memory mapping of the flash chips on the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20210302014317.915120-5-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-18Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27aspeed_soc: Rename memmap/irqmap enum constantsEduardo Habkost
Some of the enum constant names conflict with the QOM type check macros: ASPEED_GPIO ASPEED_I2C ASPEED_RTC ASPEED_SCU ASPEED_SDHCI ASPEED_SDMC ASPEED_VIC ASPEED_WDT ASPEED_XDMA This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to ASPEED_DEV_*, to avoid conflicts. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-7-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-06-15arm/aspeed: Compute the number of CPUs from the SoC definitionCédric Le Goater
Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-02-13hw/arm: ast2400/ast2500: Wire up EHCI controllersGuenter Roeck
Initialize EHCI controllers on AST2400 and AST2500 using the existing TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux successfully instantiates a USB interface. ehci-platform 1e6a3000.usb: EHCI Host Controller ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000 ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206183437.3979-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/arm: ast2600: Wire up the eMMC controllerAndrew Jeffery
Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Add a DRAM memory region at the SoC levelCédric Le Goater
Currently, we link the DRAM memory region to the FMC model (for DMAs) through a property alias at the SoC level. The I2C model will need a similar region for DMA support, add a DRAM region property at the SoC level for both model to use. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-12-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-15aspeed/soc: Add ASPEED Video stubJoel Stanley
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-24-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed: add support for the Aspeed MII controller of the AST2600Cédric Le Goater
The AST2600 SoC has an extra controller to set the PHY registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-23-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed: Parameterise number of MACsJoel Stanley
To support the ast2600's four MACs allow SoCs to specify the number they have, and create that many. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-22-clg@kaod.org [clg: - included a check on sc->macs_num when realizing the macs - included interrupt definitions for the AST2600 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed/soc: Add AST2600 supportCédric Le Goater
Initial definitions for a simple machine using an AST2600 SoC (Cortex CPU). The Cortex CPU and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new Aspeed SoC class with instance_init and realize handlers to handle the differences with the AST2400 and the AST2500 SoCs. This will add extra work to keep in sync both models with future extensions but it makes the code clearer. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-19-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed: Introduce an object class per SoCCédric Le Goater
It prepares ground for the AST2600. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15hw: wdt_aspeed: Add AST2600 supportJoel Stanley
The AST2600 has four watchdogs, and they each have a 0x40 of registers. When running as part of an ast2600 system we must check a different offset for the system reset control register in the SCU. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-12-clg@kaod.org [clg: - reworked model integration into new object class ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15hw/sd/aspeed_sdhci: New deviceEddie James
The Aspeed SOCs have two SD/MMC controllers. Add a device that encapsulates both of these controllers and models the Aspeed-specific registers and behavior. Tested by reading from mmcblk0 in Linux: qemu-system-arm -machine romulus-bmc -nographic \ -drive file=flash-romulus,format=raw,if=mtd \ -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-3-clg@kaod.org [clg: - changed the controller MMIO window size to 0x1000 - moved the MMIO mapping of the SDHCI slots at the SoC level - merged code to add SD drives on the SD buses at the machine level ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed: Use consistent typenamesCédric Le Goater
Improve the naming of the different controller models to ease their generation when initializing the SoC. The rename of the SMC types is breaking migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-5-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed: add a GPIO controller to the SoCRashmica Gupta
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16include: Make headers more self-containedMarkus Armbruster
Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-01hw/misc/aspeed_xdma: New deviceEddie James
The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations between the SOC (acting as a BMC) and a host processor in a server. The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so enable it for all of those. Add trace events on the important register writes in the XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-21-clg@kaod.org [clg: - changed title ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-19 09:46:59 +0000