aboutsummaryrefslogtreecommitdiff
path: root/include/block
AgeCommit message (Collapse)Author
2022-03-04crypto: perform permission checks under BQLEmanuele Giuseppe Esposito
Move the permission API calls into driver-specific callbacks that always run under BQL. In this case, bdrv_crypto_luks needs to perform permission checks before and after qcrypto_block_amend_options(). The problem is that the caller, block_crypto_amend_options_generic_luks(), can also run in I/O from .bdrv_co_amend(). This does not comply with Global State-I/O API split, as permissions API must always run under BQL. Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean() callbacks. These two callbacks are guaranteed to be invoked under BQL, respectively before and after .bdrv_co_amend(). They take care of performing the permission checks in the same way as they are currently done before and after qcrypto_block_amend_options(). These callbacks are in preparation for next patch, where we delete the original permission check. Right now they just add redundant control. Then, call .bdrv_amend_pre_run() before job_start in qmp_x_blockdev_amend(), so that it will be run before the job coroutine is created and stay in the main loop. As a cleanup, use JobDriver's .clean() callback to call .bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL. After this patch, permission failures occur early in the blockdev-amend job to update a LUKS volume's keys. iotest 296 must now expect them in x-blockdev-amend's QMP reply instead of waiting for the actual job to fail later. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220209105452.1694545-2-eesposit@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220304153729.711387-6-hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-03hw/nvme: 64-bit pi supportNaveen Nagar
This adds support for one possible new protection information format introduced in TP4068 (and integrated in NVMe 2.0): the 64-bit CRC guard and 48-bit reference tag. This version does not support storage tags. Like the CRC16 support already present, this uses a software implementation of CRC64 (so it is naturally pretty slow). But its good enough for verification purposes. This may go nicely hand-in-hand with the support that Keith submitted for the Linux kernel[1]. [1]: https://lore.kernel.org/linux-nvme/20220126165214.GA1782352@dhcp-10-100-145-180.wdc.com/T/ Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Naveen Nagar <naveen.n1@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-03-03hw/nvme: add support for the lbafee hbs featureNaveen Nagar
Add support for up to 64 LBA formats through the LBAFEE field of the Host Behavior Support feature. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Naveen Nagar <naveen.n1@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-03-03hw/nvme: add host behavior support featureNaveen Nagar
Add support for getting and setting the Host Behavior Support feature. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Naveen Nagar <naveen.n1@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-02-14hw/nvme: add support for zoned random write areaKlaus Jensen
Add support for TP 4076 ("Zoned Random Write Area"), v2021.08.23 ("Ratified"). This adds three new namespace parameters: "zoned.numzrwa" (number of zrwa resources, i.e. number of zones that can have a zrwa), "zoned.zrwas" (zrwa size in LBAs), "zoned.zrwafg" (granularity in LBAs for flushes). Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-02-14hw/nvme: add ozcs enumKlaus Jensen
Add enumeration for OZCS values. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-02-14hw/nvme: add struct for zone management sendKlaus Jensen
Add struct for Zone Management Send in preparation for more zone send flags. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-02-01block.h: remove outdated commentEmanuele Giuseppe Esposito
The comment "disk I/O throttling" doesn't make any sense at all any more. It was added in commit 0563e191516 to describe bdrv_io_limits_enable()/disable(), which were removed in commit 97148076, so the comment is just a forgotten leftover. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220131125615.74612-1-eesposit@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-01-14Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches - qemu-storage-daemon: Add vhost-user-blk help - block-backend: Fix use-after-free for BDS pointers after aio_poll() - qemu-img: Fix sparseness of output image with unaligned ranges - vvfat: Fix crashes in read-write mode - Fix device deletion events with -device JSON syntax - Code cleanups # gpg: Signature made Fri 14 Jan 2022 13:50:16 GMT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: iotests/testrunner.py: refactor test_field_width block: drop BLK_PERM_GRAPH_MOD qemu-img: make is_allocated_sectors() more efficient iotests: Test qemu-img convert of zeroed data cluster vvfat: Fix vvfat_write() for writes before the root directory vvfat: Fix size of temporary qcow file iotests/308: Fix for CAP_DAC_OVERRIDE iotests/stream-error-on-reset: New test block-backend: prevent dangling BDS pointers across aio_poll() qapi/block: Restrict vhost-user-blk to CONFIG_VHOST_USER_BLK_SERVER qemu-storage-daemon: Add vhost-user-blk help docs: Correct 'vhost-user-blk' spelling softmmu: fix device deletion events with -device JSON syntax include/sysemu/blockdev.h: remove drive_get_max_devs include/sysemu/blockdev.h: remove drive_mark_claimed_by_board and inline drive_def block_int: make bdrv_backing_overridden static Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-14block: drop BLK_PERM_GRAPH_MODVladimir Sementsov-Ogievskiy
First, this permission never protected a node from being changed, as generic child-replacing functions don't check it. Second, it's a strange thing: it presents a permission of parent node to change its child. But generally, children are replaced by different mechanisms, like jobs or qmp commands, not by nodes. Graph-mod permission is hard to understand. All other permissions describe operations which done by parent node on its child: read, write, resize. Graph modification operations are something completely different. The only place where BLK_PERM_GRAPH_MOD is used as "perm" (not shared perm) is mirror_start_job, for s->target. Still modern code should use bdrv_freeze_backing_chain() to protect from graph modification, if we don't do it somewhere it may be considered as a bug. So, it's a bit risky to drop GRAPH_MOD, and analyzing of possible loss of protection is hard. But one day we should do it, let's do it now. One more bit of information is that locking the corresponding byte in file-posix doesn't make sense at all. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210902093754.2352-1-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-01-14block_int: make bdrv_backing_overridden staticEmanuele Giuseppe Esposito
bdrv_backing_overridden is only used in block.c, so there is no need to leave it in block_int.h Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20211215121140.456939-2-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-01-12aio-posix: split poll check from ready handlerStefan Hajnoczi
Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-28blockjob: drop BlockJob.blk fieldVladimir Sementsov-Ogievskiy
It's unused now (except for permission handling)[*]. The only reasonable user of it was block-stream job, recently updated to use own blk. And other block jobs prefer to use own source node related objects. So, the arguments of dropping the field are: - block jobs prefer not to use it - block jobs usually has more then one node to operate on, and better to operate symmetrically (for example has both source and target blk's in specific block-job state structure) *: BlockJob.blk is used to keep some permissions. We simply move permissions to block-job child created in block_job_create() together with blk. In mirror, we just should not care anymore about restoring state of blk. Most probably this code could be dropped long ago, after dropping bs->job pointer. Now it finally goes away together with BlockJob.blk itself. iotest 141 output is updated, as "bdrv_has_blk(bs)" check in qmp_blockdev_del() doesn't fail (we don't have blk now). Still, new error message looks even better. In iotest 283 we need to add a job id, otherwise "Invalid job ID" happens now earlier than permission check (as permissions moved from blk to block-job node). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
2021-12-28blockjob: implement and use block_job_get_aio_contextVladimir Sementsov-Ogievskiy
We are going to drop BlockJob.blk. So let's retrieve block job context from underlying job instead of main node. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
2021-11-02linux-aio: add `dev_max_batch` parameter to laio_io_unplug()Stefano Garzarella
Between the submission of a request and the unplug, other devices with larger limits may have been queued new requests without flushing the batch. Using the new `dev_max_batch` parameter, laio_io_unplug() can check if the batch exceeds the device limit to flush the current batch. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20211026162346.253081-4-sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-11-02linux-aio: add `dev_max_batch` parameter to laio_co_submit()Stefano Garzarella
This new parameter can be used by block devices to limit the Linux AIO batch size more than the limit set by the AIO context. file-posix backend supports this, passing its `aio-max-batch` option previously added. Add an helper function to calculate the maximum batch size. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20211026162346.253081-3-sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-06block: introduce max_hw_iov for use in scsi-genericPaolo Bonzini
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel sources, IOV_MAX in POSIX). Because of this, on some host adapters requests with many iovecs are rejected with -EINVAL by the io_submit() or readv()/writev() system calls. In fact, the same limit applies to SG_IO as well. To fix both the EINVAL and the possible performance issues from using fewer iovecs than allowed by Linux (some HBAs have max_segments as low as 128), introduce a separate entry in BlockLimits to hold the max_segments value from sysfs. This new limit is used only for SG_IO and clamped to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to bs->bl.max_transfer. Reported-by: Halil Pasic <pasic@linux.ibm.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Cc: qemu-stable@nongnu.org Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-06block: implement bdrv_new_open_driver_opts()Vladimir Sementsov-Ogievskiy
Add version of bdrv_new_open_driver() that supports QDict options. We'll use it in further commit. Simply add one more argument to bdrv_new_open_driver() is worse, as there are too many invocations of bdrv_new_open_driver() to update then. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Suggested-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210920115538.264372-2-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-06include/block.h: remove outdated commentEmanuele Giuseppe Esposito
There are a couple of errors in bdrv_drained_begin header comment: - block_job_pause does not exist anymore, it has been replaced with job_pause in b15de82867 - job_pause is automatically invoked as a .drained_begin callback (child_job_drained_begin) by the child_job BdrvChildClass struct in blockjob.c. So no additional pause should be required. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210903113800.59970-1-eesposit@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-09-29block: use int64_t instead of int in driver discard handlersVladimir Sementsov-Ogievskiy
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver discard handlers bytes parameter to int64_t. The only caller of all updated function is bdrv_co_pdiscard in block/io.c. It is already prepared to work with 64bit requests, but pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver. Let's look at all updated functions: blkdebug: all calculations are still OK, thanks to bdrv_check_qiov_request(). both rule_check and bdrv_co_pdiscard are 64bit blklogwrites: pass to blk_loc_writes_co_log which is 64bit blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to cbw_do_copy_before_write which is 64bit file-posix: one handler calls raw_account_discard() is 64bit and both handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass to RawPosixAIOData::aio_nbytes, which is 64bit (and calls raw_account_discard()) gluster: somehow, third argument of glfs_discard_async is size_t. Let's set max_pdiscard accordingly. iscsi: iscsi_allocmap_set_invalid is 64bit, !is_byte_request_lun_aligned is 64bit. list.num is uint32_t. Let's clarify max_pdiscard and pdiscard_alignment. mirror_top: pass to bdrv_mirror_top_do_write() which is 64bit nbd: protocol limitation. max_pdiscard is alredy set strict enough, keep it as is for now. nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits to nvme_refresh_limits(). preallocate: pass to bdrv_co_pdiscard() which is 64bit. rbd: pass to qemu_rbd_start_co() which is 64bit. qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(), qcow2_cluster_discard() is 64bit. raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too. throttle: pass to bdrv_co_pdiscard() which is 64bit and to throttle_group_co_io_limits_intercept() which is 64bit as well. test-block-iothread: bytes argument is unused Great! Now all drivers are prepared to handle 64bit discard requests, or else have explicit max_pdiscard limits. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: make BlockLimits::max_pdiscard 64bitVladimir Sementsov-Ogievskiy
We are going to support 64 bit discard requests. Now update the limit variable. It's absolutely safe. The variable is set in some drivers, and used in bdrv_co_pdiscard(). Update also max_pdiscard variable in bdrv_co_pdiscard(), so that bdrv_co_pdiscard() is now prepared for 64bit requests. The remaining logic including num, offset and bytes variables is already supporting 64bit requests. So the only thing that prevents 64 bit requests is limiting max_pdiscard variable to INT_MAX in bdrv_co_pdiscard(). We'll drop this limitation after updating all block drivers. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20210903102807.27127-10-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of int in driver write_zeroes handlersVladimir Sementsov-Ogievskiy
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write_zeroes handlers bytes parameter to int64_t. The only caller of all updated function is bdrv_co_do_pwrite_zeroes(). bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s max_write_zeroes is limited to INT_MAX. So, updated functions all are safe, they will not get "bytes" larger than before. Still, let's look through all updated functions, and add assertions to the ones which are actually unprepared to values larger than INT_MAX. For these drivers also set explicit max_pwrite_zeroes limit. Let's go: blkdebug: calculations can't overflow, thanks to bdrv_check_qiov_request() in generic layer. rule_check() and bdrv_co_pwrite_zeroes() both have 64bit argument. blklogwrites: pass to blk_log_writes_co_log() with 64bit argument. blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pwrite_zeroes() which is OK copy-before-write: Calls cbw_do_copy_before_write() and bdrv_co_pwrite_zeroes, both have 64bit argument. file-posix: both handler calls raw_do_pwrite_zeroes, which is updated. In raw_do_pwrite_zeroes() calculations are OK due to bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes which is uint64_t. Check also where that uint64_t gets handed: handle_aiocb_write_zeroes_block() passes a uint64_t[2] to ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate() which takes off_t (and we compile to always have 64-bit off_t), as does handle_aiocb_write_zeroes_unmap. All look safe. gluster: bytes go to GlusterAIOCB::size which is int64_t and to glfs_zerofill_async works with off_t. iscsi: Aha, here we deal with iscsi_writesame16_task() that has uint32_t num_blocks argument and iscsi_writesame16_task() has uint16_t argument. Make comments, add assertions and clarify max_pwrite_zeroes calculation. iscsi_allocmap_() functions already has int64_t argument is_byte_request_lun_aligned is simple to update, do it. mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t argument nbd: Aha, here we have protocol limitation, and NBDRequest::len is uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are OK for now. nvme: Again, protocol limitation. And no inherent limit for write-zeroes at all. But from code that calculates cdw12 it's obvious that we do have limit and alignment. Let's clarify it. Also, obviously the code is not prepared to handle bytes=0. Let's handle this case too. trace events already 64bit preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both 64bit. rbd: pass to qemu_rbd_start_co() which is 64bit. qcow2: offset + bytes and alignment still works good (thanks to bdrv_check_qiov_request()), so tail calculation is OK qcow2_subcluster_zeroize() has 64bit argument, should be OK trace events updated qed: qed_co_request wants int nb_sectors. Also in code we have size_t used for request length which may be 32bit. So, let's just keep INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and don't care. raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both 64bit. throttle: Both throttle_group_co_io_limits_intercept() and bdrv_co_pwrite_zeroes() are 64bit. vmdk: pass to vmdk_pwritev which is 64bit quorum: pass to quorum_co_pwritev() which is 64bit Hooray! At this point all block drivers are prepared to support 64bit write-zero requests, or have explicitly set max_pwrite_zeroes. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: use <= rather than < in assertions relying on max_pwrite_zeroes] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: make BlockLimits::max_pwrite_zeroes 64bitVladimir Sementsov-Ogievskiy
We are going to support 64 bit write-zeroes requests. Now update the limit variable. It's absolutely safe. The variable is set in some drivers, and used in bdrv_co_do_pwrite_zeroes(). Update also max_write_zeroes variable in bdrv_co_do_pwrite_zeroes(), so that bdrv_co_do_pwrite_zeroes() is now prepared to 64bit requests. The remaining logic including num, offset and bytes variables is already supporting 64bit requests. So the only thing that prevents 64 bit requests is limiting max_write_zeroes variable to INT_MAX in bdrv_co_do_pwrite_zeroes(). We'll drop this limitation after updating all block drivers. Ah, we also have bdrv_check_request32() in bdrv_co_pwritev_part(). It will be modified to do bdrv_check_request() for write-zeroes path. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-7-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in copy_range driver handlersVladimir Sementsov-Ogievskiy
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver copy_range handlers parameters which are already 64bit to signed type. Now let's consider all callers. Simple git grep '\->bdrv_co_copy_range' shows the only caller: bdrv_co_copy_range_internal(), which does bdrv_check_request32(), so everything is OK. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_co_copy_range_\(from\|to\)\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows no more callers. So, we are done. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20210903102807.27127-6-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver write handlersVladimir Sementsov-Ogievskiy
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver read handlersVladimir Sementsov-Ogievskiy
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29qcow2: check request on vmstate save/load pathVladimir Sementsov-Ogievskiy
We modify the request by adding an offset to vmstate. Let's check the modified request. It will help us to safely move .bdrv_co_preadv_part and .bdrv_co_pwritev_part to int64_t type of offset and bytes. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20210903102807.27127-3-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-24hw/nvme: fix verification of select field in namespace attachmentNaveen Nagar
Fix is added to check for reserved value in select field for namespace attachment CC: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Naveen Nagar <naveen.n1@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-09-15block: Clarify that @bytes is no limit on *pnumHanna Reitz
.bdrv_co_block_status() implementations are free to return a *pnum that exceeds @bytes, because bdrv_co_block_status() in block/io.c will clamp *pnum as necessary. On the other hand, if drivers' implementations return values for *pnum that are as large as possible, our recently introduced block-status cache will become more effective. So, make a note in block_int.h that @bytes is no upper limit for *pnum. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210812084148.14458-4-hreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2021-09-15block: block-status cache for data regionsHanna Reitz
As we have attempted before (https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg06451.html, "file-posix: Cache lseek result for data regions"; https://lists.nongnu.org/archive/html/qemu-block/2021-02/msg00934.html, "file-posix: Cache next hole"), this patch seeks to reduce the number of SEEK_DATA/HOLE operations the file-posix driver has to perform. The main difference is that this time it is implemented as part of the general block layer code. The problem we face is that on some filesystems or in some circumstances, SEEK_DATA/HOLE is unreasonably slow. Given the implementation is outside of qemu, there is little we can do about its performance. We have already introduced the want_zero parameter to bdrv_co_block_status() to reduce the number of SEEK_DATA/HOLE calls unless we really want zero information; but sometimes we do want that information, because for files that consist largely of zero areas, special-casing those areas can give large performance boosts. So the real problem is with files that consist largely of data, so that inquiring the block status does not gain us much performance, but where such an inquiry itself takes a lot of time. To address this, we want to cache data regions. Most of the time, when bad performance is reported, it is in places where the image is iterated over from start to end (qemu-img convert or the mirror job), so a simple yet effective solution is to cache only the current data region. (Note that only caching data regions but not zero regions means that returning false information from the cache is not catastrophic: Treating zeroes as data is fine. While we try to invalidate the cache on zero writes and discards, such incongruences may still occur when there are other processes writing to the image.) We only use the cache for nodes without children (i.e. protocol nodes), because that is where the problem is: Drivers that rely on block-status implementations outside of qemu (e.g. SEEK_DATA/HOLE). Resolves: https://gitlab.com/qemu-project/qemu/-/issues/307 Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20210812084148.14458-3-hreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [hreitz: Added `local_file == bs` assertion, as suggested by Vladimir] Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-09-15block: Drop BDS comment regarding bdrv_append()Hanna Reitz
There is a comment above the BDS definition stating care must be taken to consider handling newly added fields in bdrv_append(). Actually, this comment should have said "bdrv_swap()" as of 4ddc07cac (nine years ago), and in any case, bdrv_swap() was dropped in 8e419aefa (six years ago). So no such care is necessary anymore. Signed-off-by: Hanna Reitz <hreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210812084148.14458-2-hreitz@redhat.com>
2021-09-01block/block-copy: block_copy_state_new(): drop extra argumentsVladimir Sementsov-Ogievskiy
The only caller pass copy_range and compress both false. Let's just drop these arguments. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210824083856.17408-35-vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-09-01block/backup: move cluster size calculation to block-copyVladimir Sementsov-Ogievskiy
The main consumer of cluster-size is block-copy. Let's calculate it here instead of passing through backup-top. We are going to publish copy-before-write filter soon, so it will be created through options. But we don't want for now to make explicit option for cluster-size, let's continue to calculate it automatically. So, now is the time to get rid of cluster_size argument for bdrv_cbw_append(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-10-vsementsov@virtuozzo.com> [hreitz: Add qemu/error-report.h include to block/block-copy.c] Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-09-01block/block-copy: introduce block_copy_set_copy_opts()Vladimir Sementsov-Ogievskiy
We'll need a possibility to set compress and use_copy_range options after initialization of the state. So make corresponding part of block_copy_state_new() separate and public. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210824083856.17408-8-vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-09-01block-copy: move detecting fleecing scheme to block-copyVladimir Sementsov-Ogievskiy
We want to simplify initialization interface of copy-before-write filter as we are going to make it public. So, let's detect fleecing scheme exactly in block-copy code, to not pass this information through extra levels. Why not just set BDRV_REQ_SERIALISING unconditionally: because we are going to implement new more efficient fleecing scheme which will not rely on backing feature. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20210824083856.17408-7-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-09-01block: introduce bdrv_replace_child_bs()Vladimir Sementsov-Ogievskiy
Add function to transactionally replace bs inside BdrvChild. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-2-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-07-26hw/nvme: use symbolic names for registersKlaus Jensen
Add the NvmeBarRegs enum and use these instead of explicit register offsets. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-07-26hw/nvme: split pmrmsc register into upper and lowerKlaus Jensen
The specification uses a set of 32 bit PMRMSCL and PMRMSCU registers to make up the 64 bit logical PMRMSC register. Make it so. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-07-21iothread: add aio-max-batch parameterStefano Garzarella
The `aio-max-batch` parameter will be propagated to AIO engines and it will be used to control the maximum number of queued requests. When there are in queue a number of requests equal to `aio-max-batch`, the engine invokes the system call to forward the requests to the kernel. This parameter allows us to control the maximum batch size to reduce the latency that requests might accumulate while queued in the AIO engine queue. If `aio-max-batch` is equal to 0 (default value), the AIO engine will use its default maximum batch size value. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20210721094211.69853-3-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-07-10Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches - Make blockdev-reopen stable - Remove deprecated qemu-img backing file without format - rbd: Convert to coroutines and add write zeroes support - rbd: Updated MAINTAINERS - export/fuse: Allow other users access to the export - vhost-user: Fix backends without multiqueue support - Fix drive-backup transaction endless drained section # gpg: Signature made Fri 09 Jul 2021 13:49:22 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (28 commits) block: Make blockdev-reopen stable API iotests: Test reopening multiple devices at the same time block: Support multiple reopening with x-blockdev-reopen block: Acquire AioContexts during bdrv_reopen_multiple() block: Add bdrv_reopen_queue_free() qcow2: Fix dangling pointer after reopen for 'file' qemu-img: Improve error for rebase without backing format qemu-img: Require -F with -b backing image qcow2: Prohibit backing file changes in 'qemu-img amend' blockdev: fix drive-backup transaction endless drained section vhost-user: Fix backends without multiqueue support MAINTAINERS: add block/rbd.c reviewer block/rbd: fix type of task->complete iotests/fuse-allow-other: Test allow-other iotests/308: Test +w on read-only FUSE exports export/fuse: Let permissions be adjustable export/fuse: Give SET_ATTR_SIZE its own branch export/fuse: Add allow-other option export/fuse: Pass default_permissions for mount util/uri: do not check argument of uri_free() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09block: Acquire AioContexts during bdrv_reopen_multiple()Kevin Wolf
As the BlockReopenQueue can contain nodes in multiple AioContexts, only one of which may be locked when AIO_WAIT_WHILE() can be called, we can't let the caller lock the right contexts. Instead, individually lock the AioContext of a single node when iterating the queue. Reintroduce bdrv_reopen() as a wrapper for reopening a single node that drains the node and temporarily drops the AioContext lock for bdrv_reopen_multiple(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210708114709.206487-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-07-09block: Add bdrv_reopen_queue_free()Alberto Garcia
Move the code to free a BlockReopenQueue to a separate function. It will be used in a subsequent patch. [ kwolf: Also free explicit_options and options, and explicitly qobject_ref() the value when it continues to be used. This makes future memory leaks less likely. ] Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210708114709.206487-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-07-05util/async: add a human-readable name to BHs for debuggingStefan Hajnoczi
It can be difficult to debug issues with BHs in production environments. Although BHs can usually be identified by looking up their ->cb() function pointer, this requires debug information for the program. It is also not possible to print human-readable diagnostics about BHs because they have no identifier. This patch adds a name to each BH. The name is not unique per instance but differentiates between cb() functions, which is usually enough. It's done by changing aio_bh_new() and friends to macros that stringify cb. The next patch will use the name field when reporting leaked BHs. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210414200247.917496-2-stefanha@redhat.com>
2021-07-02Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches - Supporting changing 'file' in x-blockdev-reopen - ssh: add support for sha256 host key fingerprints - vhost-user-blk: Implement reconnection during realize - introduce QEMU_AUTO_VFREE - Don't require password of encrypted backing file for image creation - Code cleanups # gpg: Signature made Wed 30 Jun 2021 17:00:55 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (24 commits) vhost-user-blk: Implement reconnection during realize vhost-user-blk: Factor out vhost_user_blk_realize_connect() vhost: Distinguish errors in vhost_dev_get_config() vhost-user-blk: Add Error parameter to vhost_user_blk_start() vhost: Return 0/-errno in vhost_dev_init() vhost: Distinguish errors in vhost_backend_init() vhost: Add Error parameter to vhost_dev_init() block/ssh: add support for sha256 host key fingerprints block/commit: use QEMU_AUTO_VFREE introduce QEMU_AUTO_VFREE iotests: Test replacing files with x-blockdev-reopen block: Allow changing bs->file on reopen block: BDRVReopenState: drop replace_backing_bs field block: move supports_backing check to bdrv_set_file_or_backing_noperm() block: bdrv_reopen_parse_backing(): simplify handling implicit filters block: bdrv_reopen_parse_backing(): don't check frozen child block: bdrv_reopen_parse_backing(): don't check aio context block: introduce bdrv_set_file_or_backing_noperm() block: introduce bdrv_remove_file_or_backing_child() block: comment graph-modifying function not updating permissions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-30Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into ↵Peter Maydell
staging hw/nvme patches * namespace eui64 support (Heinrich) * aiocb refactoring (Klaus) * controller parameter for auto zone transitioning (Niklas) * misc fixes and additions (Gollu, Klaus, Keith) # gpg: Signature made Tue 29 Jun 2021 19:46:55 BST # gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9 # gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown] # gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838 # Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9 * remotes/nvme/tags/nvme-next-pull-request: (23 commits) hw/nvme: add 'zoned.zasl' to documentation hw/nvme: fix pin-based interrupt behavior (again) hw/nvme: fix missing check for PMR capability hw/nvme: documentation fix hw/nvme: fix endianess conversion and add controller list Partially revert "hw/block/nvme: drain namespaces on sq deletion" hw/nvme: reimplement format nvm to allow cancellation hw/nvme: reimplement zone reset to allow cancellation hw/nvme: reimplement the copy command to allow aio cancellation hw/nvme: add dw0/1 to the req completion trace event hw/nvme: use prinfo directly in nvme_check_prinfo and nvme_dif_check hw/nvme: remove assert from nvme_get_zone_by_slba hw/nvme: save reftag when generating pi hw/nvme: reimplement dsm to allow cancellation hw/nvme: add nvme_block_status_all helper hw/nvme: reimplement flush to allow cancellation hw/nvme: default for namespace EUI-64 hw/nvme: namespace parameter for EUI-64 hw/nvme: fix csi field for cns 0x00 and 0x11 hw/nvme: add param to control auto zone transitioning to zone state closed ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-29block: Allow changing bs->file on reopenAlberto Garcia
When the x-blockdev-reopen was added it allowed reconfiguring the graph by replacing backing files, but changing the 'file' option was forbidden. Because of this restriction some operations are not possible, notably inserting and removing block filters. This patch adds support for replacing the 'file' option. This is similar to replacing the backing file and the user is likewise responsible for the correctness of the resulting graph, otherwise this can lead to data corruption. Signed-off-by: Alberto Garcia <berto@igalia.com> [vsementsov: bdrv_reopen_parse_file_or_backing() is modified a lot] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210610120537.196183-9-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-29block: BDRVReopenState: drop replace_backing_bs fieldVladimir Sementsov-Ogievskiy
It's used only in bdrv_reopen_commit(). "backing" is covered by the loop through all children except for case when we removed backing child during reopen. Make it more obvious and drop extra boolean field: qdict_del will not fail if there is no such entry. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210610120537.196183-8-vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-29hw/nvme: fix endianess conversion and add controller listGollu Appalanaidu
Add the controller identifiers list CNS 0x13, available list of ctrls in NVM Subsystem that may or may not be attached to namespaces. In Identify Ctrl List of the CNS 0x12 and 0x13 no endian conversion for the nsid field. These two CNS values shows affect when there exists a Subsystem. Added condition if there is no Subsystem return invalid field in command. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-06-29hw/nvme: use prinfo directly in nvme_check_prinfo and nvme_dif_checkKlaus Jensen
The nvme_check_prinfo() and nvme_dif_check() functions operate on the 16 bit "control" member of the NvmeCmd. These functions do not otherwise operate on an NvmeCmd or an NvmeRequest, so change them to expect the actual 4 bit PRINFO field and add constants that work on this field as well. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-06-29hw/nvme: add identify namespace flbas/mc enumsGollu Appalanaidu
Add enums for the Identify Namespace FLBAS and MC fields. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> [k.jensen: squashed separate flbas/mc commits into one] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 00:20:30 +0000