aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2018-03-02mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA imagePeter Maydell
Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org
2018-03-02hw/arm/iotkit: Model Arm IOT KitPeter Maydell
Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org
2018-03-02hw/misc/iotkit-secctl: Add remaining simple registersPeter Maydell
Add remaining easy registers to iotkit-secctl: * NSCCFG just routes its two bits out to external GPIO lines * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's bus fabric can never report errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180220180325.29818-18-peter.maydell@linaro.org
2018-03-02hw/misc/iotkit-secctl: Add handling for PPCsPeter Maydell
The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org
2018-03-02hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeletonPeter Maydell
The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org
2018-03-02hw/misc/tz-ppc: Model TrustZone peripheral protection controllerPeter Maydell
Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org
2018-03-02hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505Peter Maydell
The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org
2018-03-02hw/core/split-irq: Device that splits IRQ linesPeter Maydell
In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org
2018-03-02qdev: Add new qdev_init_gpio_in_named_with_opaque()Peter Maydell
The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org
2018-03-02hw/misc/unimp: Move struct to header filePeter Maydell
Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org
2018-03-02armv7m: Forward init-svtor property to CPU objectPeter Maydell
Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org
2018-03-02armv7m: Forward idau property to CPU objectPeter Maydell
Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org
2018-03-02hw/arm/armv7m: Honour CPU's address space for image loadsPeter Maydell
Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org
2018-03-02hw/arm/boot: Honour CPU's address space for image loadsPeter Maydell
Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org
2018-03-02loader: Add new load_ramdisk_as()Peter Maydell
Add a function load_ramdisk_as() which behaves like the existing load_ramdisk() but allows the caller to specify the AddressSpace to use. This matches the pattern we have already for various other loader functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-2-peter.maydell@linaro.org
2018-03-02xlnx-zynqmp: Connect the RTC deviceAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02xlnx-zynqmp-rtc: Add basic time supportAlistair Francis
Allow the guest to determine the time set from the QEMU command line. This includes adding a trace event to debug the new time. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02xlnx-zynqmp-rtc: Initial commitAlistair Francis
Initial commit of the ZynqMP RTC device. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, fixes and cleanups - documentation updates - vhost fixes - new crypto vhost device Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 01 Mar 2018 16:27:25 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: cryptodev-vhost-user: set the key length cryptodev-vhost-user: add crypto session handler cryptodev: add vhost support cryptodev: add vhost-user as a new cryptodev backend docs/vmcoreinfo: detail unsupported host format behaviour vhost: fix incorrect check in vhost_verify_ring_mappings vhost: avoid to start/stop virtqueue which is not ready vhost: fix memslot limit check docs: pcie: Spell out machine type needs for PCIe features docs: document virtio-balloon stats intel-iommu: Accept 64-bit writes to FEADDR virtio-pci: trivial fixes in error message vhost-user: fix memory leak Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180301-v2' into ↵Peter Maydell
staging - add query-cpus-fast and deprecate query-cpus, while adding s390 cpu information - remove s390x memory hotplug implementation, which is not useable in this form - add boot menu support in the s390-ccw bios - expose s390x guest crash information - fixes and cleaups # gpg: Signature made Thu 01 Mar 2018 12:54:47 GMT # gpg: using RSA key DECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cohuck@redhat.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20180301-v2: (27 commits) s390x/tcg: fix loading 31bit PSWs with the highest bit set s390x: remove s390_get_memslot_count s390x/sclp: remove memory hotplug support s390x/cpumodel: document S390FeatDef.bit not applicable hmp: change hmp_info_cpus to use query-cpus-fast qemu-doc: deprecate query-cpus qmp: add architecture specific cpu data for query-cpus-fast qmp: add query-cpus-fast qmp: expose s390-specific CPU info s390x/tcg: add various alignment checks s390x/tcg: fix disabling/enabling DAT s390/stattrib: Make SaveVMHandlers data static s390x/cpu: expose the guest crash information pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes s390-ccw: interactive boot menu for scsi s390-ccw: use zipl values when no boot menu options are present s390-ccw: set cp_receive mask only when needed and consume pending service irqs s390-ccw: read user input for boot index via the SCLP console s390-ccw: print zipl boot menu s390-ccw: read stage2 boot loader data to find menu ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01cryptodev-vhost-user: add crypto session handlerGonglei
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side support crypto operation in cryptodev host-user backend. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev: add vhost supportGonglei
Impliment the vhost-crypto's funtions, such as startup, stop and notification etc. Introduce an enum QCryptoCryptoDevBackendOptionsType in order to identify the cryptodev vhost backend is vhost-user or vhost-kernel-module (If exist). At this point, the cryptdoev-vhost-user works. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01vhost: fix incorrect check in vhost_verify_ring_mappingsJia He
In commit 0ca1fd2d6878 ("vhost: Simplify ring verification checks"), it checks the virtqueue desc mapping for 3 times. Fixed: commit 0ca1fd2d6878 ("vhost: Simplify ring verification checks") Signed-off-by: Jia He <jia.he@hxt-semitech.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-01vhost: avoid to start/stop virtqueue which is not readyJia He
In our Armv8a server, we try to configure the vhost scsi but fail to boot up the guest (-machine virt-2.10). The guest's boot failure is very early, even earlier than grub. There are 3 virtqueues (ctrl, event and cmd) for virtio scsi device, but ovmf and seabios will only set the physical address for the 3rd one (cmd). Then in vhost_virtqueue_start(), virtio_queue_get_desc_addr will be 0 for ctrl and event vq when qemu negotiates with ovmf. So vhost_memory_map fails with ENOMEM. This patch just fixs it by early quitting the virtqueue start/stop when virtio_queue_get_desc_addr is 0. Btw, after guest kernel starts, all the 3 queues will be initialized and set address correctly. Already tested on Arm64 and X86_64 qemu. Signed-off-by: Jia He <jia.he@hxt-semitech.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180301' into staging target-arm queue: * update MAINTAINERS for Alistair's new email address * add Arm v8.2 FP16 arithmetic extension for linux-user * implement display connector emulation for vexpress board * xilinx_spips: Enable only two slaves when reading/writing with stripe * xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands * hw: register: Run post_write hook on reset # gpg: Signature made Thu 01 Mar 2018 11:22:46 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180301: (42 commits) MAINTAINERS: Update my email address linux-user: Report AArch64 FP16 support via hwcap bits target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU arm/translate-a64: add all single op FP16 to handle_fp_1src_half arm/translate-a64: implement simd_scalar_three_reg_same_fp16 arm/translate-a64: add all FP16 ops in simd_scalar_pairwise arm/translate-a64: add FP16 FMOV to simd_mod_imm arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 arm/helper.c: re-factor rsqrte and add rsqrte_f16 arm/translate-a64: add FP16 FSQRT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FRECPE arm/helper.c: re-factor recpe and add recepe_f16 arm/translate-a64: add FP16 FNEG/FABS to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 SCVTF/UCVFT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FCMxx (zero) to simd_two_reg_misc_fp16 arm/translate-a64: add FCVTxx to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16 arm/translate-a64: initial decode for simd_two_reg_misc_fp16 arm/translate-a64: add FP16 x2 ops for simd_indexed ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01vhost: fix memslot limit checkJay Zhou
Since used_memslots will be updated to the actual value after registering memory listener for the first time, move the memslots limit checking to the right place. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01intel-iommu: Accept 64-bit writes to FEADDRJan Kiszka
Xen is doing this [1] and currently triggers an abort. [1] http://xenbits.xenproject.org/gitweb/?p=xen.git;a=blob;f=xen/drivers/passthrough/vtd/iommu.c;h=daaed0abbdd06b6ba3d948ea103aadf02651e83c;hb=refs/heads/master#l1108 Reported-by: Luis Lloret <luis_lloret@mentor.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01virtio-pci: trivial fixes in error messageGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into ↵Peter Maydell
staging qemu-sparc update # gpg: Signature made Tue 27 Feb 2018 19:03:28 GMT # gpg: using RSA key 5BC2C56FAE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-sparc-signed: loader: don't perform overlapping address check for memory region ROM images Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01arm/vexpress: Add proper display connector emulationLinus Walleij
This adds the SiI9022 (and implicitly EDID I2C) device to the ARM Versatile Express machine, and selects the two I2C devices necessary in the arm-softmmu.mak configuration so everything will build smoothly. I am implementing proper handling of the graphics in the Linux kernel and adding proper emulation of SiI9022 and EDID makes the driver probe as nicely as before, retrieving the resolutions supported by the "QEMU monitor" and overall just working nice. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-6-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01hw/sii9022: Add support for Silicon Image SII9022Linus Walleij
This adds support for emulating the Silicon Image SII9022 DVI/HDMI bridge. It's not very clever right now, it just acknowledges the switch into DDC I2C mode and back. Combining this with the existing DDC I2C emulation gives the right behavior on the Versatile Express emulation passing through the QEMU EDID to the emulated platform. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-5-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: explictly reset ddc_req/ddc_skip_finish/ddc] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01hw/i2c-ddc: Do not fail writesLinus Walleij
The tx function of the DDC I2C slave emulation was returning 1 on all writes resulting in NACK in the I2C bus. Changing it to 0 makes the DDC I2C work fine with bit-banged I2C such as the versatile I2C. I guess it was not affecting whatever I2C controller this was used with until now, but with the Versatile I2C it surely does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-4-linus.walleij@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01i2c: Move the bus class to i2c.hCorey Minyard
Some devices need access to it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-3-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01i2c: Fix some brace style issuesCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-2-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commandsFrancisco Iglesias
Use 8 dummy cycles (4 dummy bytes) with the QIOR/QIOR4 commands in legacy mode for matching what is expected by Micron (Numonyx) flashes (the default target flash type of the QSPI). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-3-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01xilinx_spips: Enable only two slaves when reading/writing with stripeFrancisco Iglesias
Assert only the lower cs on bus 0 and upper cs on bus 1 when both buses and chip selects are enabled (e.g reading/writing with stripe). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-2-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01hw: register: Run post_write hook on resetAlistair Francis
Ensure that the post write hook is called during reset. This allows us to rely on the post write functions instead of having to call them from the reset() function. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: d131e24b911653a945e46ca2d8f90f572469e1dd.1517856214.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanberger/tags/pull-tpm-2018-02-21-2' into staging Merge tpm 2018/02/21 v2 # gpg: Signature made Tue 27 Feb 2018 13:50:28 GMT # gpg: using RSA key 75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2018-02-21-2: tests: add test for TPM TIS device tests: Move common TPM test code into tpm-emu.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-27loader: don't perform overlapping address check for memory region ROM imagesMark Cave-Ayland
All memory region ROM images have a base address of 0 which causes the overlapping address check to fail if more than one memory region ROM image is present, or an existing ROM image is loaded at address 0. Make sure that we ignore the overlapping address check in rom_check_and_register_reset() if this is a memory region ROM image. In particular this fixes the "rom: requested regions overlap" error on startup when trying to run qemu-system-sparc with a -kernel image since commit 7497638642: "tcx: switch to load_image_mr() and remove prom_addr hack". Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-02-27Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180227-pull-request' ↵Peter Maydell
into staging usb: add mtp write support. # gpg: Signature made Tue 27 Feb 2018 08:39:01 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20180227-pull-request: usb-mtp: Advertise SendObjectInfo for write support usb-mtp: Introduce write support for MTP objects usb-mtp: Support delete of mtp objects usb-mtp: print parent path in IN_IGNORED trace fn usb-mtp: Add one more argument when building results Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-27Merge tag 'tags/s390-ccw-bios-2018-02-26' into s390-nextCornelia Huck
Boot menu patches by Collin L. Walling # gpg: Signature made Mon 26 Feb 2018 11:24:21 AM CET # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] * tag 'tags/s390-ccw-bios-2018-02-26': pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes s390-ccw: interactive boot menu for scsi s390-ccw: use zipl values when no boot menu options are present s390-ccw: set cp_receive mask only when needed and consume pending service irqs s390-ccw: read user input for boot index via the SCLP console s390-ccw: print zipl boot menu s390-ccw: read stage2 boot loader data to find menu s390-ccw: set up interactive boot menu parameters s390-ccw: parse and set boot menu options s390-ccw: move auxiliary IPL data to separate location s390-ccw: update libc s390-ccw: refactor IPL structs s390-ccw: refactor eckd_block_num to use CHS s390-ccw: refactor boot map table code
2018-02-26virtio-gpu-3d: add support for second capability set (v4)Dave Airlie
Due to a kernel bug we can never increase the size of capability set 1, so introduce a new capability set in parallel, old userspace will continue to use the old set, new userspace will start using the new one when it detects a fixed kernel. v2: don't use a define from virglrenderer, just probe it. v3: fix compilation when virglrenderer disabled v4: fix style warning, just use ?: op instead. Signed-off-by: Dave Airlie <airlied@redhat.com> Message-id: 20180223023814.24459-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26s390x/sclp: remove memory hotplug supportDavid Hildenbrand
From an architecture point of view, nothing can be mapped into the address space on s390x. All there is is memory. Therefore there is also not really an interface to communicate such information to the guest. All we can do is specify the maximum ram address and guests can probe in that range if memory is available and usable (TPROT). Also memory hotplug is strange. The guest can decide at some point in time to add / remove memory in some range. While the hypervisor can deny to online an increment, all increments have to be predefined and there is no way of telling the guest about a newly "hotplugged" increment. So if we specify right now e.g. -m 2G,slots=2,maxmem=20G An ordinary fedora guest will happily online (hotplug) all memory, resulting in a guest consuming 20G. So it really behaves rather like -m 22G There is no way to hotplug memory from the outside like on other architectures. This is of course bad for upper management layers. As the guest can create/delete memory regions while it is running, of course migration support is not available and tricky to implement. With virtualization, it is different. We might want to map something into guest address space (e.g. fake DAX devices) and not detect it automatically as memory. So we really want to use the maxmem and slots parameter just like on all other architectures. Such devices will have to expose the applicable memory range themselves. To finally be able to provide memory hotplug to guests, we will need a new paravirtualized interface to do that (e.g. something into the direction of virtio-mem). This implies, that maxmem cannot be used for s390x memory hotplug anymore and has to go. This simplifies the code quite a bit. As migration support is not working, this change cannot really break migration as guests without slots and maxmem don't see the SCLP features. Also, the ram size calculation does not change. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180219174231.10874-1-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> [CH: tweaked patch description, as discussed on list] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26qmp: expose s390-specific CPU infoViktor Mihajlovski
Presently s390x is the only architecture not exposing specific CPU information via QMP query-cpus. Upstream discussion has shown that it could make sense to report the architecture specific CPU state, e.g. to detect that a CPU has been stopped. With this change the output of query-cpus will look like this on s390: [ {"arch": "s390", "current": true, "props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0, "qom_path": "/machine/unattached/device[0]", "halted": false, "thread_id": 63115}, {"arch": "s390", "current": false, "props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1, "qom_path": "/machine/unattached/device[1]", "halted": true, "thread_id": 63116} ] This change doesn't add the s390-specific data to HMP 'info cpus'. A follow-on patch will remove all architecture specific information from there. Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26s390/stattrib: Make SaveVMHandlers data staticDr. David Alan Gilbert
There's no need for this to be dynamic, make it static. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180212154903.8859-1-dgilbert@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26usb-mtp: Advertise SendObjectInfo for write supportBandan Das
This patch implements a dummy ObjectInfo structure so that it's easy to typecast the incoming data. If the metadata is valid, write_pending is set. Also, the incoming filename is utf-16, so, instead of depending on external libraries, just implement a simple function to get the filename Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-6-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: Introduce write support for MTP objectsBandan Das
Allow write operations on behalf of the initiator. The precursor to write is the sending of the write metadata that consists of the ObjectInfo dataset. This patch introduces a flag that is set when the responder is ready to receive write data based on a previous SendObjectInfo operation by the initiator (The SendObjectInfo implementation is in a later patch) Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-5-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: Support delete of mtp objectsBandan Das
Write of existing objects by the initiator is acheived by making a temporary buffer with the new changes, deleting the old file and then writing a new file with the same name. Also, add a "readonly" property which needs to be set to false for deletion to work. Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-4-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: print parent path in IN_IGNORED trace fnBandan Das
Fix a possible null dereference when deleting a folder and its contents. An ignored event might be received for its contents after the parent folder is deleted which will return a null object. Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-3-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: Add one more argument when building resultsBandan Das
The response to a SendObjectInfo consists of the storageid, parent obejct handle and the handle reserved for the new incoming object Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-2-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 02:35:59 +0000