aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2018-01-11Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180111' into staging target-arm queue: * add aarch64_be linux-user target * Virt: ACPI: fix qemu assert due to re-assigned table data address * imx_fec: various bug fixes and cleanups * hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask() * hw/sd/pxa2xx_mmci: add read/write() trace events * linux-user/arm/nwfpe: Check coprocessor number for FPA emulation * target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions * hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI * hw/intc/arm_gic: reserved register addresses are RAZ/WI # gpg: Signature made Thu 11 Jan 2018 13:37:25 GMT # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180111: (26 commits) hw/intc/arm_gic: reserved register addresses are RAZ/WI hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions linux-user/arm/nwfpe: Check coprocessor number for FPA emulation hw/sd/pxa2xx_mmci: add read/write() trace events hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask() imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file imx_fec: Fix a typo in imx_enet_receive() imx_fec: Use correct length for packet size imx_fec: Add support for multiple Tx DMA rings imx_fec: Emulate SHIFT16 in ENETx_RACC imx_fec: Use MIN instead of explicit ternary operator imx_fec: Use ENET_FTRL to determine truncation length imx_fec: Move Tx frame buffer away from the stack imx_fec: Change queue flushing heuristics imx_fec: Refactor imx_eth_enable_rx() imx_fec: Do not link to netdev Virt: ACPI: fix qemu assert due to re-assigned table data address target/arm: Fix stlxp for aarch64_be linux-user: Activate armeb handler registration ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11hw/intc/arm_gic: reserved register addresses are RAZ/WIPeter Maydell
The GICv2 specification says that reserved register addresses must RAZ/WI; now that we implement external abort handling for Arm CPUs this means we must return MEMTX_OK rather than MEMTX_ERROR, to avoid generating a spurious guest data abort. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
2018-01-11hw/intc/arm_gicv3: Make reserved register addresses RAZ/WIPeter Maydell
The GICv3 specification says that reserved register addresses should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR, because now that we support generating external aborts the latter will cause an abort on new board models. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
2018-01-11hw/sd/pxa2xx_mmci: add read/write() trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180104000156.30932-1-f4bug@amsat.org [PMM: add missing include] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180103224208.30291-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register fileAndrey Smirnov
Some i.MX SoCs (e.g. i.MX7) have FEC registers going as far as offset 0x614, so to avoid getting aborts when accessing those on QEMU, extend the register file to cover FSL_IMX25_FEC_SIZE(16K) of address space instead of just 1K. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Fix a typo in imx_enet_receive()Andrey Smirnov
Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Use correct length for packet sizeAndrey Smirnov
Use 'frame_size' instead of 'len' when calling qemu_send_packet(), failing to do so results in malformed packets send in case when that packed is fragmented into multiple DMA transactions. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Add support for multiple Tx DMA ringsAndrey Smirnov
More recent version of the IP block support more than one Tx DMA ring, so add the code implementing that feature. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Emulate SHIFT16 in ENETx_RACCAndrey Smirnov
Needed to support latest Linux kernel driver which relies on that functionality. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Use MIN instead of explicit ternary operatorAndrey Smirnov
Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Use ENET_FTRL to determine truncation lengthAndrey Smirnov
Frame truncation length, TRUNC_FL, is determined by the contents of ENET_FTRL register, so convert the code to use it instead of a hardcoded constant. To avoid the case where TRUNC_FL is greater that ENET_MAX_FRAME_SIZE, increase the value of the latter to its theoretical maximum of 16K. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Move Tx frame buffer away from the stackAndrey Smirnov
Make Tx frame assembly buffer to be a paort of IMXFECState structure to avoid a concern about having large data buffer on the stack. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Change queue flushing heuristicsAndrey Smirnov
In current implementation, packet queue flushing logic seem to suffer from a deadlock like scenario if a packet is received by the interface before before Rx ring is initialized by Guest's driver. Consider the following sequence of events: 1. A QEMU instance is started against a TAP device on Linux host, running Linux guest, e. g., something to the effect of: qemu-system-arm \ -net nic,model=imx.fec,netdev=lan0 \ netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \ ... rest of the arguments ... 2. Once QEMU starts, but before guest reaches the point where FEC deriver is done initializing the HW, Guest, via TAP interface, receives a number of multicast MDNS packets from Host (not necessarily true for every OS, but it happens at least on Fedora 25) 3. Recieving a packet in such a state results in imx_eth_can_receive() returning '0', which in turn causes tap_send() to disable corresponding event (tap.c:203) 4. Once Guest's driver reaches the point where it is ready to recieve packets it prepares Rx ring descriptors and writes ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that more descriptors are ready. And at this points emulation layer does this: s->regs[index] = ENET_RDAR_RDAR; imx_eth_enable_rx(s); which, combined with: if (!s->regs[ENET_RDAR]) { qemu_flush_queued_packets(qemu_get_queue(s->nic)); } results in Rx queue never being flushed and corresponding I/O event beign disabled. To prevent the problem, change the code to always flush packet queue when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Refactor imx_eth_enable_rx()Andrey Smirnov
Refactor imx_eth_enable_rx() to have more meaningfull variable name than 'tmp' and to reduce number of logical negations done. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Do not link to netdevAndrey Smirnov
Binding to a particular netdev doesn't seem to belong to this layer and should probably be done as a part of board or SoC specific code. Convert all of the users of this IP block to use qdev_set_nic_properties() instead. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11Virt: ACPI: fix qemu assert due to re-assigned table data addressZhaoshenglong
acpi_data_push uses g_array_set_size to resize the memory size. If there is no enough contiguous memory, the address will be changed. If we use the old value, it will assert. qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum: Assertion `start_offset < file->blob->len' failed.` This issue only happens in building SRAT table now but here we unify the pattern for other tables as well to avoid possible issues in the future. Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180111' ↵Peter Maydell
into staging ppc patch queue 2018-01-11 This pull request supersedes ppc-for-2.12-20180108 and several before it. The earlier pull request included a patch which exposed a bug in the ARM TCG backend. I've pulled that out and will repost once the ARM bug is fixed (a patch has been posted by Richard Henderson). Higlights from this series: * SLOF update * Several new devices for embedded platforms * Fix to correctly set compatiblity mode for hotplugged CPUs * dtc compile fix for older MacOS versions # gpg: Signature made Thu 11 Jan 2018 04:58:11 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.12-20180111: spapr: Correct compatibility mode setting for hotplugged CPUs hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge device Update dtc to fix compilation problem on Mac OS 10.6 target/ppc: more use of the PPC_*() macros ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistency hw/ide: Emulate SiI3112 SATA controller spapr_pci: use warn_report() ppc4xx_i2c: Implement basic I2C functions sm501: Add some more unimplemented registers sm501: Add panel hardware cursor registers also to read function pseries: Update SLOF firmware image to qemu-slof-20171214 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-10spapr: Correct compatibility mode setting for hotplugged CPUsDavid Gibson
Currently the pseries machine sets the compatibility mode for the guest's cpus in two places: 1) at machine reset and 2) after CAS negotiation. This means that if we set or negotiate a compatiblity mode, then hotplug a cpu, the hotplugged cpu doesn't get the right mode set and will incorrectly have the full native features. To correct this, we set the compatibility mode on a cpu when it is brought online with the 'start-cpu' RTAS call. Given that we no longer need to set the compatibility mode on all CPUs at machine reset, so we change that to only set the mode for the boot cpu. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2018-01-10hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge deviceThomas Huth
It's a deprecated dummy device since QEMU v2.6.0. That should have been enough time to allow the users to update their scripts in case they still use it, so let's remove this legacy code now. Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10target/ppc: more use of the PPC_*() macrosCédric Le Goater
Also introduce utilities to manipulate bitmasks (originaly from OPAL) which be will be used in the model of the XIVE interrupt controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistencyCédric Le Goater
The 'pnv' prefix is now used for all and the routines populating the device tree start with 'pnv_dt'. The handler of the PnvXScomInterface is also renamed to 'dt_xscom' which should reflect that it is populating the device tree under the 'xscom@' node of the chip. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10hw/ide: Emulate SiI3112 SATA controllerBALATON Zoltan
This is a common generic PCI SATA controller that is also used in PCs but more importantly guests running on the Sam460ex board prefer this card and have a driver for it (unlike for other SATA controllers already emulated). Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10spapr_pci: use warn_report()Greg Kurz
These two are definitely warnings. Let's use the appropriate API. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10ppc4xx_i2c: Implement basic I2C functionsBALATON Zoltan
Enough to please U-Boot and make it able to detect SDRAM SPD EEPROMs Signed-off-by: François Revol <revol@free.fr> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10sm501: Add some more unimplemented registersBALATON Zoltan
These are not really implemented (just return zero or default values) but add these so guests accessing them can run. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10sm501: Add panel hardware cursor registers also to read functionBALATON Zoltan
These were forgotten when adding panel layer support in ffd39257018 "SM501 emulation for R2D-SH4". Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [dwg: Added reference to earlier commit in message] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-09sun4u_iommu: add trace event for IOMMU translationsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4u_iommu: convert from IOMMU_DPRINTF to trace-eventsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4u_iommu: update to reflect IOMMU is no longer part of the APB deviceMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4u: split IOMMU device out from apb.c to sun4u_iommu.cMark Cave-Ayland
By separating the sun4u IOMMU device into new sun4u_iommu.c and sun4m_iommu.h files we noticeably simplify apb.c whilst bringing sun4u in line with all the other IOMMU-supporting architectures. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09apb: QOMify IOMMUMark Cave-Ayland
This is in preparation to split the IOMMU device out of the APB. As part of this commit we also enforce separation of the IOMMU and APB devices by using a QOM object link to pass the IOMMU reference and accessing the IOMMU registers via a separate memory region mapped into the APB config space rather than directly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4m: remove include/hw/sparc/sun4m.h and all references to itMark Cave-Ayland
With the previous commit there is now nothing left in sun4m.h so it can be removed, along with all remaining references to it. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4m: move IOMMU declarations from sun4m.h to sun4m_iommu.hMark Cave-Ayland
Also updating the relevant .c files as required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4m: move sun4m_iommu.c from hw/dma to hw/sparcMark Cave-Ayland
This seems more appropriate and brings sun4m in line with the other architectures. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4u: switch from EBUS_DPRINTF() macro to trace-eventsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sparc64: introduce trace-events for hw/sparc64Mark Cave-Ayland
This is in preparation for switching code in hw/sparc64 from DPRINTF over to trace events. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09apb: replace OBIO interrupt numbers in pci_pbmA_map_irq() with constantsMark Cave-Ayland
Following on from the previous commit, we can also do the same with with legacy OBIO interrupts in pci_pbmA_map_irq(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09ebus: wire up OBIO interrupts to APB pbm via qdev GPIOsMark Cave-Ayland
This enables us to remove the static array mapping in the ISA IRQ handler (and the embedded reference to the APB device) by formalising the interrupt wiring via the qdev GPIO API. For more clarity we replace the APB OBIO interrupt numbers with constants designating the interrupt source, and rename isa_irq_handler() to ebus_isa_irq_handler(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09apb: remove busA property from PBMPCIBridge stateMark Cave-Ayland
Since the previous commit the only remaining use of the qdev busA property is to configure the PCI bridge in front of the onboard ebus devices differently to allow early OpenBIOS serial console access. Instead we can now manually update the PCI configuration for bridge A in pci_pbm_reset() and thus completely remove the busA property from the PBMPCIBridge state. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09apb: split pci_pbm_map_irq() into separate functions for bus A and bus BMark Cave-Ayland
After the previous refactoring it is now possible to use separate functions to improve the clarity of the interrupt paths. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09apb: remove pci_apb_init() and instantiate APB device using qdevMark Cave-Ayland
By making the special_base and mem_base values qdev properties, we can move the remaining parts of pci_apb_init() into the pbm init() and realize() functions. This finally allows us to instantiate the APB directly using standard qdev create/init functions in sun4u.c. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09apb: move the two secondary PCI bridges objects into APBStateMark Cave-Ayland
This enables us to remove these parameters from pci_apb_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09apb: use gpios to wire up the apb device to the SPARC CPU IRQsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09apb: return APBState from pci_apb_init() rather than PCIBusMark Cave-Ayland
This is a first step towards removing pci_apb_init() completely. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09apb: APB QOMify tidy-upMark Cave-Ayland
Use DeviceClass rather than SysBusDeviceClass in pbm_host_class_init() and adjust pci_pbm_init_device() accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09sun4u: move initialisation of all ISABus devices into ebus_realize()Mark Cave-Ayland
This belongs in the PCI-ISA bridge rather than at the machine level. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09sun4u: remove pci_ebus_init() functionMark Cave-Ayland
This is initialisation that should really take place in the ebus realize function. As part of this we also rework the ebus IRQ mapping so that instead of having to pass in the array of pbm_irqs, we obtain a reference to them by looking up the APB device during ebus realize. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09sun4u: move ISABus inside of EBusStateMark Cave-Ayland
Since the EBus is effectively a PCI-ISA bridge then the underlying ISA bus should be contained within the PCI bridge itself. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09sun4u: ebus QOMify tidy-upMark Cave-Ayland
The main change here is to introduce the proper TYPE_EBUS/EBUS QOM macros and remove the use of DO_UPCAST. Alongside this there are some a couple of minor cosmetic changes and a rename of pci_ebus_realize() to ebus_realize() since the ebus device is always what is effectively a PCI-ISA bridge. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 16:56:15 +0000