aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2013-05-12remove double semicolonsDong Xu Wang
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-12m25p80.c: Sync Flash chip list with LinuxEd Maste
Add new devices for various manufacturers, and re-sort Spansion list to match the order in Linux, which requires chips with a non-zero extended ID to come first. With this commit the outstanding differences to Linux rev 55bf75b are: - Erase size flag differences in s25sl032p, s25sl064p, s25fl016k, s25fl064k (These devices have only some blocks that support small erase sizes.) - Linux lacks n25q128 - Devices without a Jedec ID have been excluded Signed-off-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-08Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Kevin Wolf (7) and Fam Zheng (3) # Via Kevin Wolf * kwolf/for-anthony: qemu-iotests: fix 017 018 for vmdk qemu-iotests: exclude vmdk and qcow from 043 qemu-iotests: exclude vmdk for test 042 qtest/ide-test: Test short and long PRDTs qtest/ide-test: Add simple DMA read/write test case qtest: Add IDE test case libqos/pci: Enable bus mastering ide: Reset BMIDEA bit when the bus master is stopped de_DE.po: Add missing leading spaces ahci: Don't allow creating slave drives Message-id: 1368023344-29731-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08virtio: properly validate address before accessing configJason Wang
There are several several issues in the current checking: - The check was based on the minus of unsigned values which can overflow - It was done after .{set|get}_config() which can lead crash when config_len is zero since vdev->config is NULL Fix this by: - Validate the address in virtio_pci_config_{read|write}() before .{set|get}_config - Use addition instead minus to do the validation Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Petr Matousek <pmatouse@redhat.com> Message-id: 1367905369-10765-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08virtio-pci: fix level interruptsMichael S. Tsirkin
mask notifiers are never called without msix, so devices with backend masking like vhost don't work. Call mask notifiers explicitly at startup/cleanup to make it work. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08ide: Reset BMIDEA bit when the bus master is stoppedKevin Wolf
The device is supposed to reset the Bus Master IDE Active bit in the status register when 0 is written to the Start/Stop Bus Master bit in the command register. In the common cases this happens automatically because bdrv_drain_all() flushes the requests, but with a large PRDT it could remain set. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08ahci: Don't allow creating slave drivesKevin Wolf
An IDE bus provided by AHCI can only take a single IDE drive. If you add a drive as slave, qemu used to accept the command line but the device wouldn't be actually usable. Catch the situation instead and error out. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-07Merge remote-tracking branch 'kraxel/usb.82' into stagingAnthony Liguori
# By Gerd Hoffmann (3) and Hans de Goede (1) # Via Gerd Hoffmann * kraxel/usb.82: xhci: handle USB_RET_BABBLE uhci: Use an intermediate buffer for usb packet data usb-host: add usb_host_full_speed_compat usb-host: live migration support for the libusb version Message-id: 1367920207-1404-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-07virtio-net: properly check the vhost status during status setJason Wang
Commit 32993698 (vhost: disable on tap link down) tries to disable the vhost also when the peer's link is down. But the check was not done properly, the vhost were only started when: 1) peer's link is not down 2) virtio-net has already been started. Since == have a higher precedence than &&, place a brace to make sure both the conditions were met then does the check. This fixes the crash when doing a savem after set the link off which let qemu crash and complains: virtio_net_save: Assertion `!n->vhost_started' failed. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1366972060-21606-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-07Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori
# By Eduardo Habkost (6) and others # Via Andreas Färber * afaerber/qom-cpu: target-i386: n270 can MOVBE target-i386: Introduce generic CPUID feature compat function target-i386: Change CPUID model of 486 to 8 target-i386: Emulate X86CPU subclasses for global properties qdev: Introduce qdev_prop_set_globals_for_type() qdev: Let qdev_prop_parse() pass through Error target-i386: Add "filtered-features" property to X86CPU target-i386: Introduce X86CPU::filtered_features field target-i386: Add "feature-words" property to X86CPU target-i386: Use FeatureWord loop on filter_features_for_kvm() target-i386: Add ECX information to FeatureWordInfo
2013-05-07xhci: handle USB_RET_BABBLEGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07uhci: Use an intermediate buffer for usb packet dataHans de Goede
Due to various unfortunate reasons we cannot reliable detect a guest cancelling a packet as soon as it happens, instead we detect cancels with some delay. When packets are handled async, and we directly pass the guest memory for the packet to the usb-device as iovec, this means that the usb-device can write to guest-memory which the guest has already re-used for other purposes -> not good! This patch fixes this by adding an intermediate buffer and writing back not only the result, but also the data, of async completed packets when scanning the schedule. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: add usb_host_full_speed_compatGerd Hoffmann
Alloes to pass through usb2 devices on usb1 host controllers if possible. Brings the libusb implementation to feature-parity with the linux usbfs code, so the usb-host implementation in 1.5 (libusb) doesn't regress compared to 1.4 (usbfs). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: live migration support for the libusb versionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-06Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
# By Marcelo Tosatti # Via Gleb Natapov * qemu-kvm/uq/master: kvmvapic: add ioport read accessor Message-id: cover.1367844188.git.gleb@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-06target-i386: n270 can MOVBEBorislav Petkov
The Atom core (cpu name "n270" in QEMU speak) supports MOVBE. This is needed when booting 3.8 and later linux kernels built with the MATOM target because we require MOVBE in order to boot properly now. Signed-off-by: Borislav Petkov <bp@suse.de> [ehabkost: added compat code to disable MOVBE on pc-*-1.4 and older] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06Merge branch 's390-for-upstream' of git://github.com/agraf/qemuAurelien Jarno
* 's390-for-upstream' of git://github.com/agraf/qemu: s390: update s390-ccw.img S390: BIOS boot from given device S390: Add virtio-blk boot S390: Merging s390_ipl_cpu and s390_ipl_reset S390: BIOS create link to src folder for .img file S390: BIOS check for file
2013-05-06qdev: Introduce qdev_prop_set_globals_for_type()Andreas Färber
Reuse it in qdev_prop_set_globals(). Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [AF: Renamed from qdev_prop_set_custom_globals()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06qdev: Let qdev_prop_parse() pass through ErrorAndreas Färber
Move error reporting to callers. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06S390: Add virtio-blk bootDominik Dingel
If no kernel IPL entry is specified, boot the bios and pass if available device information for the first boot device (as given by the boot index). The provided information will be used in the next commit from the BIOS. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: Merging s390_ipl_cpu and s390_ipl_resetDominik Dingel
There is no use in have this splitted in two functions. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: BIOS check for fileDominik Dingel
Add a check if the BIOS blob exists before trying to load. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06spapr_llan: fix device reenablingAlexey Kardashevskiy
Normally, the "tap" device is polled by QEMU if a guest NIC can receive packets. If a guest NIC is stopped during transfer (rmmod or ifdown), it may still have packets in a queue which have to be send to the guest before QEMU enables polling of a "tap" interface via tap_update_fd_handler(). However the spapr_llan device was missing the qemu_flush_queued_packets() call so the tap_send_completed() callback was never called and therefore "tap" interface polling was not enabled ever. The patch fixes this problem. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06PPC: e500: correct params->ram_size with ram_sizeTiejun Chen
We should sync params->ram_size after we fixup memory size on a alignment boundary. Otherwise Guest would exceed the actual memory region. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06PPC: e500: initialize GPRs as per epaprBharat Bhushan
ePAPR defines the initial values of cpu registers. This patch initialize the GPRs as per ePAPR specification. This resolves the issue of guest reboot/reset (guest hang on reboot). Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: add whitespace line] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06pseries: Fix debug message for out-of-bounds address in H_PUT_TCEDavid Gibson
Due to a brain outage, this message says "out-of-boards" instead of "out-of-bounds". Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06pseries: Factor out check for out-of-bounds LIOBNDavid Gibson
PAPR defines LIOBNs (Logical IO Bus Numbers) to be 32-bit, and we check for values that aren't in the code for H_PUT_TCE. This patch factors the check into spapr_tce_find_by_liobn(), which already checks if a 32-bit LIOBN actually exists. This will become more important as future patches add other hypercalls which need to look up a LIOBN. At the same time we fix the typo in the message. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06kvmvapic: add ioport read accessorMarcelo Tosatti
Necessary since memory region accessor assumes read and write methods are registered. Otherwise reading I/O port 0x7e segfaults. https://bugzilla.redhat.com/show_bug.cgi?id=954306 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-06Merge remote-tracking branch 'afaerber-or/prep-up' into stagingAnthony Liguori
# By Andreas Färber (1) and others # Via Andreas Färber * afaerber-or/prep-up: prep: Make System I/O port 0092 read/write prep: Add ELF support for -bios prep: Fix NIP reset value
2013-05-06Merge remote-tracking branch 'pmaydell/arm-devs.next' into stagingAnthony Liguori
# By Jean-Christophe DUBOIS # Via Peter Maydell * pmaydell/arm-devs.next: i.MX: implement a more correct version of EPIT timer. Message-id: 1367603215-5120-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-06prep: Make System I/O port 0092 read/writeJulio Guerra
Port 0x0092 is documented as read/write, so for now return the endianness state instead of hardcoded 0x00. Signed-off-by: Julio Guerra <guerr@julio.in> [AF: Extracted from larger port 0092 patch] Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-05-05prep: Add ELF support for -biosAndreas Färber
This prepares for switching from OpenHack'Ware to OpenBIOS. While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-05-05prep: Fix NIP reset valueFabien Chouteau
The value was changed by commit 09d9828ace37ead29d510a7e24e63c2f15cd4b1c "PPC: fix hreset_vector for 60x, ...". Change it back for prep machine to unbreak OpenHack'Ware. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-05-03i.MX: implement a more correct version of EPIT timer.Jean-Christophe DUBOIS
This patch is providing a complete version of the EPIT timer. Note, however that the GPT timer in the same file is still not complete. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Message-id: 1365624982-15647-1-git-send-email-jcd@tribudubois.net Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au> [PMM: wrapped an overly long line] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-05-03qdev: skip bus check for bus-less devices in qdev_unplug()Igor Mammedov
Since commit 2f7bd829db "qdev: Fix device_add bus assumptions" it's possible to device_add bus-less device, but if such device is unplugged it will dereference NULL parent_bus in qdev_unplug(). Fix it by taking in account that parent_bus might be NULL and skipping bus check. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1367587536-14964-1-git-send-email-imammedo@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03virtio-scsi: fix the command line compatibility.KONRAD Frederic
The bus name is wrong since the refactoring. This keeps the behaviour of the command line. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03virtio-serial: fix command line compatibility.KONRAD Frederic
The bus name is wrong since the refactoring. This keeps the behaviour of the command line. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03scsi: add bus_name parameter to scsi_bus_new.KONRAD Frederic
This adds the possibility to create a scsi-bus with a specified name. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03virtio: add virtio_device_set_child_bus_name.KONRAD Frederic
Add virtio_device_set_child_bus_name function. It will be used with virtio-serial-x and virtio-scsi-x to set the child bus name before calling virtio-x-device's init. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03virtio-x-bus: force bus name to virtio-bus.KONRAD Frederic
When the proxy id is set, this bus takes the name "id.0" which is expected to be the virtio-device's first bus. So force this name to "virtio-bus" as it is an internal bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-2-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-02Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori
# By Igor Mammedov (21) and others # Via Andreas Färber * afaerber/qom-cpu: (29 commits) Drop redundant resume_all_vcpus() from main() cpus: Fix pausing TCG CPUs while in vCPU thread target-i386: Replace cpuid_*features fields with a feature word array target-i386: Break CPUID feature definition lines target-i386/kvm.c: Code formatting changes target-i386: Group together level, xlevel, xlevel2 fields pc: Implement QEMUMachine::hot_add_cpu hook QMP: Add cpu-add command Add hot_add_cpu hook to QEMUMachine target-i386: Move APIC to ICC bus target-i386: Attach ICC bus to CPU on its creation target-i386: Introduce ICC bus/device/bridge cpu: Move cpu_write_elfXX_note() functions to CPUState kvmvapic: Make dependency on sysbus.h explicit target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZE target-i386: Do not allow to set apic-id once CPU is realized target-i386: Introduce apic-id CPU property target-i386: Introduce feat2prop() for CPU properties acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guest cpu: Add helper cpu_exists(), to check if CPU with specified id exists ...
2013-05-02target-i386: Replace cpuid_*features fields with a feature word arrayEduardo Habkost
This replaces the feature-bit fields on both X86CPU and x86_def_t structs with an array. With this, we will be able to simplify code that simply does the same operation on all feature words (e.g. kvm_check_features_against_host(), filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit property lookup/registration, and the proposed "feature-words" property) The following field replacements were made on X86CPU and x86_def_t: (cpuid_)features -> features[FEAT_1_EDX] (cpuid_)ext_features -> features[FEAT_1_ECX] (cpuid_)ext2_features -> features[FEAT_8000_0001_EDX] (cpuid_)ext3_features -> features[FEAT_8000_0001_ECX] (cpuid_)ext4_features -> features[FEAT_C000_0001_EDX] (cpuid_)kvm_features -> features[FEAT_KVM] (cpuid_)svm_features -> features[FEAT_SVM] (cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01Trivial grammar and spelling fixesStefan Weil
similiar -> similar recieve -> receive transfered -> transferred preperation -> preparation Most changes are in comments, one modifies a parameter name in a function prototype. The spelling fixes were made using codespell. Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-01pc: Implement QEMUMachine::hot_add_cpu hookIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Move APIC to ICC busIgor Mammedov
It allows APIC to be hotplugged. * map APIC's mmio at board level if it is present * do not register mmio region for each APIC, since only one is used/mapped Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Attach ICC bus to CPU on its creationIgor Mammedov
X86CPU should have parent bus so it could provide bus for child APIC. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Introduce ICC bus/device/bridgeIgor Mammedov
Provides a hotpluggable bus for APIC and CPU. * icc-bridge will serve as a parent for icc-bus and provide mmio mapping services to child icc-devices. * icc-device will replace SysBusDevice as a parent of APIC and IOAPIC devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01kvmvapic: Make dependency on sysbus.h explicitIgor Mammedov
Allows kvmvapic to compile if sysbus.h is removed from apic_internal.h, from which it is indirectly included. sysbus.h will be removed from apic_internal.h after converting APICs to ICCDevice. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZEIgor Mammedov
Put APIC_SPACE_SIZE in a public header so that it can be reused elsewhere later. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Introduce apic-id CPU propertyIgor Mammedov
The property is used from board level to set APIC ID for CPUs it creates. Do so in a new pc_new_cpu() helper, to be reused for hot-plug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-04 03:59:34 +0000