| Age | Commit message (Collapse) | Author |
|---|
|
The functions operating on capability don't have a consistent return style.
Below functions are in bool-valued functions style:
vfio_msi_setup()
vfio_msix_setup()
vfio_add_std_cap()
vfio_add_capabilities()
Below two are integer-valued functions:
vfio_add_vendor_specific_cap()
vfio_setup_pcie_cap()
But the returned integer is only used for check succeed/failure.
Change them all to return bool so now all capability related
functions follow the coding standand in qapi/error.h to return
bool.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Since vfio_populate_device() takes an 'Error **' argument,
best practices suggest to return a bool. See the qapi/error.h
Rules section.
By this chance, pass errp directly to vfio_populate_device() to
avoid calling error_propagate().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
bool
Since vfio_pci_relocate_msix() and vfio_msix_early_setup() takes
an 'Error **' argument, best practices suggest to return a bool.
See the qapi/error.h Rules section.
By this chance, pass errp directly to vfio_msix_early_setup() to avoid
calling error_propagate().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Since vfio_intx_enable_kvm() takes an 'Error **' argument,
best practices suggest to return a bool. See the qapi/error.h
Rules section.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Since vfio_populate_device() takes an 'Error **' argument,
best practices suggest to return a bool. See the qapi/error.h
Rules section.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
return bool
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Local pointer irq_set is freed before return from
vfio_set_irq_signaling().
Use 'g_autofree' to avoid the g_free() calls.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
vfio_display_dmabuf_init() and vfio_display_region_init() calls
ramfb_setup() without checking its return value.
So we may run into a situation that vfio_display_probe() succeed
but errp is set. This is risky and may lead to assert failure in
error_setv().
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b290659fc3d ("hw/vfio/display: add ramfb support")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Misc HW patches queue
- Fix build when GBM buffer management library is detected (Cédric)
- Fix PFlash block write (Gerd)
- Allow 'parameter=1' for SMP topology on any machine (Daniel)
- Allow guest-debug tests to run with recent GDB (Gustavo)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZHcOsACgkQ4+MsLN6t
# wN4CqxAA15Ow9ubxipORpM+XJgJ5isyPjD1s/6bR6lj7joBS6CYQbMaaskXuDQK8
# FpeoWw2DI2Fh/61NcUMAk7XBFF59DLrtngDhfLZJYdwBh0S8RFs1wp6sKyaBA9K6
# wDy39plxt/abKGzj3EcJUGDvhBLPJNnqy5OF9fZtWGrQg+A1i9uLMu/ac6srfX+K
# zau/CxQaHYRYLYFmRcQCOhFVAtp2TQHw14CiiLYMCxF3GvUCN0xmtg8lzj9/y4ke
# Yt0VN6jC3opfmQuDtPJNNkp8beaHbwMARFmXepDVB2cHp8DY5Gm4Ij2WiR0K985G
# fqDknHEXDPI+RislV9+EN3p2c05m7ihPKLiDLYCulD4TIRDz+eUf71Onus9uecj9
# zCDdPYjU1ly9pyt7EVG2Bla9D/F51ZvbrzJQrHbvqhxWuZGOPSzHdpSsHZBIOXk6
# OhxTtUPeWDYW5K+wdNpxYPy5dqIR3jSEbDwLh2Wts2iPKxCGC8ly6CbZJPgA5lQE
# hwYbiSKNcxAMV3V9qBfKLRSGadnnfPwG/zrGOHBni9ejz+m7foA13mJ4H6VFBn7Q
# GGe9f00MCKcWTTlzRty1oIzAKcpupCOanX0MpVNcTYUqVtODhlQpDdH63ZVuiyRU
# kux9xz71I+mwkjQiTHTki1qcAbLNj9+jgwbcc74Zz1BngIauqtc=
# =Octv
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 May 2024 04:59:55 PM CEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240517' of https://github.com/philmd/qemu:
tests: Gently exit from GDB when tests complete
tests: add testing of parameter=1 for SMP topology
hw/core: allow parameter=1 for SMP topology on any machine
hw/pflash: fix block write start
ui/console: Only declare variable fence_fd when CONFIG_GBM is defined
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This effectively reverts
commit 54c4ea8f3ae614054079395842128a856a73dbf9
Author: Zhao Liu <zhao1.liu@intel.com>
Date: Sat Mar 9 00:01:37 2024 +0800
hw/core/machine-smp: Deprecate unsupported "parameter=1" SMP configurations
but is not done as a 'git revert' since the part of the changes to the
file hw/core/machine-smp.c which add 'has_XXX' checks remain desirable.
Furthermore, we have to tweak the subsequently added unit test to
account for differing warning message.
The rationale for the original deprecation was:
"Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind
of configurations is marked deprecated since 9.0."
There are varying POVs on the topic of 'unsupported' topology levels.
It is common to say that on a system without hyperthreading, that there
is always 1 thread. Likewise when new CPUs introduced a concept of
multiple "dies', it was reasonable to say that all historical CPUs
before that implicitly had 1 'die'. Likewise for the more recently
introduced 'modules' and 'clusters' parameter'. From this POV, it is
valid to set 'parameter=1' on the -smp command line for any machine,
only a value > 1 is strictly an error condition.
It doesn't cause any functional difficulty for QEMU, because internally
the QEMU code is itself assuming that all "unsupported" parameters
implicitly have a value of '1'.
At the libvirt level, we've allowed applications to set 'parameter=1'
when configuring a guest, and pass that through to QEMU.
Deprecating this creates extra difficulty for because there's no info
exposed from QEMU about which machine types "support" which parameters.
Thus, libvirt can't know whether it is valid to pass 'parameter=1' for
a given machine type, or whether it will trigger deprecation messages.
Since there's no apparent functional benefit to deleting this deprecated
behaviour from QEMU, and it creates problems for consumers of QEMU,
remove this deprecation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-ID: <20240513123358.612355-2-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Move the pflash_blk_write_start() call. We need the offset of the
first data write, not the offset for the setup (number-of-bytes)
write. Without this fix u-boot can do block writes to the first
flash block only.
While being at it drop a leftover FIXME.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2343
Fixes: 284a7ee2e290 ("hw/pflash: implement update buffer for block writes")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240516121237.534875-1-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
adapter_info_so_needed() treats its "opaque" parameter as a S390FLICState,
but the function belongs to a VMStateDescription that is attached to a
TYPE_VIRTIO_CCW_BUS device. This is currently causing a crash when the
user tries to save or migrate the VM state. Fix it by using s390_get_flic()
to get the correct device here instead.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: 9d1b0f5bf5 ("s390_flic: add migration-enabled property")
Message-ID: <20240517061553.564529-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
The changed functions include:
iommufd_backend_connect
iommufd_backend_alloc_ioas
By this chance, simplify the functions a bit by avoiding duplicate
recordings, e.g., log through either error interface or trace, not
both.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
The changed functions include:
iommufd_cdev_kvm_device_add
iommufd_cdev_connect_and_bind
iommufd_cdev_attach_ioas_hwpt
iommufd_cdev_detach_ioas_hwpt
iommufd_cdev_attach_container
iommufd_cdev_get_info_iova_range
After the change, all functions in hw/vfio/iommufd.c follows the
standand.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Make VFIOIOMMUClass::add_window() and its wrapper function
vfio_container_add_section_window() return bool.
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Make VFIOIOMMUClass::attach_device() and its wrapper function
vfio_attach_device() return bool.
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Local pointer info is freed before return from
iommufd_cdev_get_info_iova_range().
Use 'g_autofree' to avoid the g_free() calls.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Local pointer name is allocated before vfio_attach_device() call
and freed after the call.
Same for tmp when calling realpath().
Use 'g_autofree' to avoid the g_free() calls.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Move trace_vfio_migration_set_state() to the top of the function, add
recover_state to it, and add a new trace event to
vfio_migration_set_device_state().
This improves tracing of device state changes as state changes are now
also logged when vfio_migration_set_state() fails (covering recover
state and device reset transitions) and in no-op state transitions to
the same state.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
When migrating a VFIO device that supports pre-copy, it is transitioned
to STOP_COPY twice: once in vfio_vmstate_change() and second time in
vfio_save_complete_precopy().
The second transition is harmless, as it's a STOP_COPY->STOP_COPY no-op
transition. However, with the newly added VFIO migration QAPI event, the
STOP_COPY event is undesirably emitted twice.
Prevent this by returning early in vfio_migration_set_state() if
new_state is the same as current device state.
Note that the STOP_COPY transition in vfio_save_complete_precopy() is
essential for VFIO devices that don't support pre-copy, for migrating an
already stopped guest and for snapshots.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Emit VFIO migration QAPI event when a VFIO device changes its migration
state. This can be used by management applications to get updates on the
current state of the VFIO device for their own purposes.
A new per VFIO device capability, "migration-events", is added so events
can be enabled only for the required devices. It is disabled by default.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
in VSC during restore/load
In case of migration, during restore operation, qemu checks config space of the
pci device with the config space in the migration stream captured during save
operation. In case of config space data mismatch, restore operation is failed.
config space check is done in function get_pci_config_device(). By default VSC
(vendor-specific-capability) in config space is checked.
Due to qemu's config space check for VSC, live migration is broken across NVIDIA
vGPU devices in situation where source and destination host driver is different.
In this situation, Vendor Specific Information in VSC varies on the destination
to ensure vGPU feature capabilities exposed to the guest driver are compatible
with destination host.
If a vfio-pci device is migration capable and vfio-pci vendor driver is OK with
volatile Vendor Specific Info in VSC then qemu should exempt config space check
for Vendor Specific Info. It is vendor driver's responsibility to ensure that
VSC is consistent across migration. Here consistency could mean that VSC format
should be same on source and destination, however actual Vendor Specific Info
may not be byte-to-byte identical.
This patch skips the check for Vendor Specific Information in VSC for VFIO-PCI
device by clearing pdev->cmask[] offsets. Config space check is still enforced
for 3 byte VSC header. If cmask[] is not set for an offset, then qemu skips
config space check for that offset.
VSC check is skipped for machine types >= 9.1. The check would be enforced on
older machine types (<= 9.0).
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Vinayak Kale <vkale@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Since vfio_ccw_register_irq_notifier() takes an 'Error **' argument,
best practices suggest to return a bool. See the qapi/error.h Rules
section.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Since vfio_ap_register_irq_notifier() takes and 'Error **' argument,
best practices suggest to return a bool. See the qapi/error.h Rules
section.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
vfio_save_complete_precopy() currently returns before doing the trace
event. Change that.
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Let the callers do the error reporting. Add documentation while at it.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Let the callers do the reporting. This will be useful in
vfio_iommu_map_dirty_notify().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
It will simplify the changes coming after.
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Use vmstate_save_state_with_err() to improve error reporting in the
callers and store a reported error under the migration stream. Add
documentation while at it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add an Error** argument to vfio_migration_set_state() and adjust
callers, including vfio_save_setup(). The error will be propagated up
to qemu_savevm_state_setup() where the save_setup() handler is
executed.
Modify vfio_vmstate_change_prepare() and vfio_vmstate_change() to
store a reported error under the migration stream if a migration is in
progress.
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Use it to update the current error of the migration stream if
available and if not, simply print out the error. Next changes will
update with an error to report.
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This allows to update the Error argument of the VFIO log_global_start()
handler. Errors for container based logging will also be propagated to
qemu_savevm_state_setup() when the ram save_setup() handler is executed.
Also, errors from vfio_container_set_dirty_page_tracking() are now
collected and reported.
The vfio_set_migration_error() call becomes redundant in
vfio_listener_log_global_start(). Remove it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
We will use the Error object to improve error reporting in the
.log_global*() handlers of VFIO. Add documentation while at it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This commit introduces utility functions for the creation and deallocation
of QemuDmaBuf instances. Additionally, it updates all relevant sections
of the codebase to utilize these new utility functions.
v7: remove prefix, "dpy_gl_" from all helpers
qemu_dmabuf_free() returns without doing anything if input is null
(Daniel P. Berrangé <berrange@redhat.com>)
call G_DEFINE_AUTOPTR_CLEANUP_FUNC for qemu_dmabuf_free()
(Daniel P. Berrangé <berrange@redhat.com>)
v8: Introduction of helpers was removed as those were already added
by the previous commit
v9: set dmabuf->allow_fences to 'true' when dmabuf is created in
virtio_gpu_create_dmabuf()/virtio-gpu-udmabuf.c
removed unnecessary spaces were accidently added in the patch,
'ui/console: Use qemu_dmabuf_new() a...'
v11: Calling qemu_dmabuf_close was removed as closing dmabuf->fd will be
done in qemu_dmabuf_free anyway.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: --- Calling qemu_dmabuf_close separately as qemu_dmabuf_free doesn't
do it.
--- 'dmabuf' is now allocated space so it should be freed at the end of
dbus_scanout_texture
v13: --- Immediately free dmabuf after it is released to prevent possible
leaking of the ptr
(Marc-André Lureau <marcandre.lureau@redhat.com>)
--- Use g_autoptr macro to define *dmabuf for auto clean up instead of
calling qemu_dmabuf_free
(Marc-André Lureau <marcandre.lureau@redhat.com>)
v14: --- (vhost-user-gpu) Change qemu_dmabuf_free back to g_clear_pointer
as it was done because of some misunderstanding (v13).
--- (vhost-user-gpu) g->dmabuf[m->scanout_id] needs to be set to NULL
to prevent freed dmabuf to be accessed again in case if(fd==-1)break;
happens (before new dmabuf is allocated). Otherwise, it would cause
invalid memory access when the same function is executed. Also NULL
check should be done before qemu_dmabuf_close (it asserts dmabuf!=NULL.).
(Marc-André Lureau <marcandre.lureau@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-6-dongwon.kim@intel.com>
|
|
This commit updates all instances where fields within the QemuDmaBuf
struct are directly accessed, replacing them with calls to these new
helper functions.
v6: fix typos in helper names in ui/spice-display.c
v7: removed prefix, "dpy_gl_" from all helpers
v8: Introduction of helpers was removed as those were already added
by the previous commit
v11: -- Use new qemu_dmabuf_close() instead of close(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
-- Use new qemu_dmabuf_dup_fd() instead of dup(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-4-dongwon.kim@intel.com>
|
|
All other boards require libfdt if it can be used (including for example
i386/x86_64), so change the "imply" to "select" and always allow -dtb
in qemu-system-xtensa.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a new Kconfig symbol, CONFIG_DEVICE_TREE, that specifies whether
to include the common device tree code in system/device_tree.c and to
link to libfdt. For now, include it unconditionally if libfdt is
available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
