| Age | Commit message (Collapse) | Author |
|---|
|
Fix bug imported by 27ce0f3afc9dd ("fix Power Management Control Register for PCI Express virtio devices"
After this change, observe that QEMU may erroneously clear the power status of the device,
or may erroneously clear non writable registers, such as NO_SOFT_RESET, etc.
Only state of PM_CTRL is writable.
Only when flag VIRTIO_PCI_FLAG_INIT_PM is set, need to reset state.
Fixes: 27ce0f3afc9dd ("fix Power Management Control Register for PCI Express virtio devices"
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Message-Id: <20240515073526.17297-2-Jiqian.Chen@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The virtio-1.3 specification
<https://docs.oasis-open.org/virtio/virtio/v1.3/virtio-v1.3.html> writes:
2.8.6 Next Flag: Descriptor Chaining
Buffer ID is included in the last descriptor in the list.
If the feature (_F_INDIRECT_DESC) has been negotiated, install only
one descriptor in the virtqueue.
Therefor the buffer id should be obtained from the first descriptor.
In descriptor chaining scenarios, the buffer id should be obtained
from the last descriptor.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240510072753.26158-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Not having VIRTIO_F_RING_PACKED in feature_bits[] is a problem when the
vhost-vsock device does not offer the feature bit VIRTIO_F_RING_PACKED
but the in QEMU device is configured to try to use the packed layout
(the virtio property "packed" is on).
As of today, the Linux kernel vhost-vsock device does not support the
packed queue layout (as vhost does not support packed), and does not
offer VIRTIO_F_RING_PACKED. Thus when for example a vhost-vsock-ccw is
used with packed=on, VIRTIO_F_RING_PACKED ends up being negotiated,
despite the fact that the device does not actually support it, and
one gets to keep the pieces.
Fixes: 74b3e46630 ("virtio: add property to enable packed virtqueue")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20240429113334.2454197-1-pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add support for the VIRTIO_F_NOTIFICATION_DATA feature across a variety
of vhost devices.
The inclusion of VIRTIO_F_NOTIFICATION_DATA in the feature bits arrays
for these devices ensures that the backend is capable of offering and
providing support for this feature, and that it can be disabled if the
backend does not support it.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-6-jonah.palmer@oracle.com>
Acked-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add support to virtio-ccw devices for handling the extra data sent from
the driver to the device when the VIRTIO_F_NOTIFICATION_DATA transport
feature has been negotiated.
The extra data that's passed to the virtio-ccw device when this feature
is enabled varies depending on the device's virtqueue layout.
That data passed to the virtio-ccw device is in the same format as the
data passed to virtio-pci devices.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-5-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add support to virtio-mmio devices for handling the extra data sent from
the driver to the device when the VIRTIO_F_NOTIFICATION_DATA transport
feature has been negotiated.
The extra data that's passed to the virtio-mmio device when this feature
is enabled varies depending on the device's virtqueue layout.
The data passed to the virtio-mmio device is in the same format as the
data passed to virtio-pci devices.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Prevent the realization of a virtio device that attempts to use the
VIRTIO_F_NOTIFICATION_DATA transport feature without disabling
ioeventfd.
Due to ioeventfd not being able to carry the extra data associated with
this feature, having both enabled is a functional mismatch and therefore
Qemu should not continue the device's realization process.
Although the device does not yet know if the feature will be
successfully negotiated, many devices using this feature wont actually
work without this extra data and would fail FEATURES_OK anyway.
If ioeventfd is able to work with the extra notification data in the
future, this compatibility check can be removed.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add support to virtio-pci devices for handling the extra data sent
from the driver to the device when the VIRTIO_F_NOTIFICATION_DATA
transport feature has been negotiated.
The extra data that's passed to the virtio-pci device when this
feature is enabled varies depending on the device's virtqueue
layout.
In a split virtqueue layout, this data includes:
- upper 16 bits: shadow_avail_idx
- lower 16 bits: virtqueue index
In a packed virtqueue layout, this data includes:
- upper 16 bits: 1-bit wrap counter & 15-bit shadow_avail_idx
- lower 16 bits: virtqueue index
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-2-jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
On setups with one or more virtio-net devices with vhost on,
dirty tracking iteration increases cost the bigger the number
amount of queues are set up e.g. on idle guests migration the
following is observed with virtio-net with vhost=on:
48 queues -> 78.11% [.] vhost_dev_sync_region.isra.13
8 queues -> 40.50% [.] vhost_dev_sync_region.isra.13
1 queue -> 6.89% [.] vhost_dev_sync_region.isra.13
2 devices, 1 queue -> 18.60% [.] vhost_dev_sync_region.isra.14
With high memory rates the symptom is lack of convergence as soon
as it has a vhost device with a sufficiently high number of queues,
the sufficient number of vhost devices.
On every migration iteration (every 100msecs) it will redundantly
query the *shared log* the number of queues configured with vhost
that exist in the guest. For the virtqueue data, this is necessary,
but not for the memory sections which are the same. So essentially
we end up scanning the dirty log too often.
To fix that, select a vhost device responsible for scanning the
log with regards to memory sections dirty tracking. It is selected
when we enable the logger (during migration) and cleared when we
disable the logger. If the vhost logger device goes away for some
reason, the logger will be re-selected from the rest of vhost
devices.
After making mem-section logger a singleton instance, constant cost
of 7%-9% (like the 1 queue report) will be seen, no matter how many
queues or how many vhost devices are configured:
48 queues -> 8.71% [.] vhost_dev_sync_region.isra.13
2 devices, 8 queues -> 7.97% [.] vhost_dev_sync_region.isra.14
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
There could be a mix of both vhost-user and vhost-kernel clients
in the same QEMU process, where separate vhost loggers for the
specific vhost type have to be used. Make the vhost logger per
backend type, and have them properly reference counted.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-1-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* tests/avocado: update firmware for sbsa-ref and use all cores
* hw/arm/smmu-common: Replace smmu_iommu_mr with smmu_find_sdev
* arm: Fix VCMLA Dd, Dn, Dm[idx]
* arm: Fix SQDMULH (by element) with Q=0
* arm: Fix FJCVTZS vs flush-to-zero
* arm: More conversion of A64 AdvSIMD to decodetree
* arm: Enable FEAT_Debugv8p8 for -cpu max
* MAINTAINERS: Update family name for Patrick Leis
* hw/arm/xilinx_zynq: Add boot-mode property
* docs/system/arm: Add a doc for zynq board
* hw/misc: In STM32L4x5 EXTI, correct configurable interrupts
* tests/qtest: fix minor issues in STM32L4x5 tests
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaC1BMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3nDOEACCoewjO2FJ4RFXMSmgr0Zf
# jxWliu7osw7oeG4ZNq1+xMiXeW0vyS54eW41TMki1f98N/yK8v55BM8kBBvDvZaz
# R5DUXpN+MtwD9A62md3B2c4mFXHqk1UOGbKi4btbtFj4lS8pV51mPmApzBUr2iTj
# w6dCLciLOt87NWgtLECXsZ3evn+VlTRc+Hmfp1M/C/Rf2Qx3zis/CFHGQsZLGwzG
# 2WhTpU1BKeOfsQa1VbSX6un14d72/JATFZN3rSgMbOEbvsCEeP+rnkzX57ejGyxV
# 4DUx69gEAqS5bOfkQHLwy82WsunD/oIgp+GpYaYgINHzh6UkEsPoymrHAaPgV1Vh
# g0TaBtbv2p89RFY1C2W2Mi4ICQ14a+oIV9FPvDsOE8Wq+wDAy/ZxZs7G6flxqods
# s4JvcMqB3kUNBZaMsFVXTKdqT1PufICS+gx0VsKdKDwXcOHwMS10nTlEOPzqvoBA
# phAsEbjnjWVhf03XTfCus+l5NT96lswCzPcUovb3CitSc2A1KUye3TyzHnxIqmOt
# Owcl+Oiso++cgYzr/BCveTAYKYoRZzVcq5jCl4bBUH/8sLrRDbT0cpFpcMk72eE9
# VhR00kbkDfL3nKrulLsG8FeUlisX5+oGb3G5AdPtU9sqJPJMmBGaF+KniI0wi7VN
# 5teHq08upLMF5JAjiKzZIA==
# =faXD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:06:43 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240701' of https://git.linaro.org/people/pmaydell/qemu-arm: (29 commits)
tests/qtest: Ensure STM32L4x5 EXTI state is correct at the end of QTests
hw/misc: In STM32L4x5 EXTI, correct configurable interrupts
tests/qtest: Fix STM32L4x5 SYSCFG irq line 15 state assumption
docs/system/arm: Add a doc for zynq board
hw/arm/xilinx_zynq: Add boot-mode property
hw/misc/zynq_slcr: Add boot-mode property
MAINTAINERS: Update my family name
target/arm: Enable FEAT_Debugv8p8 for -cpu max
target/arm: Move initialization of debug ID registers
target/arm: Fix indentation
target/arm: Delete dead code from disas_simd_indexed
target/arm: Convert FCMLA to decodetree
target/arm: Convert FCADD to decodetree
target/arm: Add data argument to do_fp3_vector
target/arm: Convert BFMMLA, SMMLA, UMMLA, USMMLA to decodetree
target/arm: Convert BFMLALB, BFMLALT to decodetree
target/arm: Convert BFDOT to decodetree
target/arm: Convert SUDOT, USDOT to decodetree
target/arm: Convert SDOT, UDOT to decodetree
target/arm: Convert SQRDMLAH, SQRDMLSH to decodetree
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Read boot-mode value as machine property and propagate that to
SLCR.BOOT_MODE register.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
boot-mode property sets user values into BOOT_MODE register, on hardware
these are derived from board switches.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-2-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
A malicious or buggy guest may generated buffered ioreqs faster than
QEMU can process them in handle_buffered_iopage(). The result is a
livelock - QEMU continuously processes ioreqs on the main thread without
iterating through the main loop which prevents handling other events,
processing timers, etc. Without QEMU handling other events, it often
results in the guest becoming unsable and makes it difficult to stop the
source of buffered ioreqs.
To avoid this, if we process a full page of buffered ioreqs, stop and
reschedule an immediate timer to continue processing them. This lets
QEMU go back to the main loop and catch up.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240404140833.1557953-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
|
|
When running in a stubdomain, the config space access via sysfs needs to
use BDF as seen inside stubdomain (connected via xen-pcifront), which is
different from the real BDF. For other purposes (hypercall parameters
etc), the real BDF needs to be used.
Get the in-stubdomain BDF by looking up relevant PV PCI xenstore
entries.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <35049e99da634a74578a1ff2cb3ae4cc436ede33.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
|
|
Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
|
|
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config().
Do it directly instead of bridging with an iommu mr pointer.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20240619002218.926674-1-nicolinc@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
private keys
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Replace stubbed OTP memory region with the new OTP device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The OTP device registers are currently stubbed. For now, the device
houses the OTP rows which will be accessed directly by other peripherals.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
trivial patches for 2024-06-30
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmaBjTkACgkQcBtPaxpp
# PlmhAAf+PZEsiBvffwwNH5n1q39Hilih35p/GCVpNYKcLsFB6bLmt9A/x062NqTS
# ob1Uj134ofHlSQtNjP1KxXdriwc40ZMahkTO+x6gYc+IpoRJGTGYEA0MWh4gPPYK
# S6l/nOI9JK1x+ot+bQzGOzOjz3/S7RJteXzwOPlWQ7GChz8NIUPWV3DkcVP0AeT0
# 7Lq7GtDBSV5Jbne2IrvOGadjPOpJiiLEmLawmw1c9qapIKAu2wxNBMlO98ufsg6L
# hDFEg6K0CKvM9fcdK8UXhnMa+58QwHhoJT+Q00aQcU1xzu+ifi/CrmgbRCK5ruTA
# o0I8q6ONbK33cTzyZ/ZmKtoA8b/Rzw==
# =N3GX
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 30 Jun 2024 09:52:09 AM PDT
# gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
hw/core/loader: gunzip(): fix memory leak on error path
vl.c: select_machine(): add selected machine type to error message
vl.c: select_machine(): use g_autoptr
vl.c: select_machine(): use ERRP_GUARD instead of error propagation
docs/system/devices/usb: Replace the non-existing "qemu" binary
docs/cxl: fix some typos
os-posix: Expand setrlimit() syscall compatibility
net/can: Remove unused struct 'CanBusState'
hw/arm/bcm2836: Remove unusued struct 'BCM283XClass'
linux-user: sparc: Remove unused struct 'target_mc_fq'
linux-user: cris: Remove unused struct 'rt_signal_frame'
monitor: Remove obsolete stubs
target/i386: Advertise MWAIT iff host supports
vl: Allow multiple -overcommit commands
cpu: fix memleak of 'halt_cond' and 'thread'
hmp-commands-info.hx: Add missing info command for stats subcommand
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We should call inflateEnd() like on success path to cleanup state in s
variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This struct has been unused since
Commit f932093ae165 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Since a4c2735f35 (cpu: move Qemu[Thread|Cond] setup into common code,
2024-05-30) these fields are now allocated at cpu_common_initfn(). So
let's make sure we also free them at cpu_common_finalize().
Furthermore, the code also frees these on round robin, but we missed
'halt_cond'.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This patch fixes two points reported in coverity scan report [1]. Check
the MMIO access address with (addr + size), not just with the start offset
addr to make sure that the requested memory access not to exceed the
actual register region. We also updated (uint8_t *) to (uint32_t *) to
represent we are accessing the MMIO registers by dword-sized only.
[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/
Cc: Jeuk Kim <jeuk20.kim@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240623024555.78697-1-minwoo.im.dev@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
|
|
RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.
We also need to set no_cdrom to avoid getting a default cdrom device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one
and set it zero.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240531202759.911601-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interrupt-controller' node.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property.
Not 'riscv,delegate'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The DT docs for riscv,aplic [1] predicts a 'qemu,aplic' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The correct name of the aplic controller node, as per Linux kernel DT
docs [1], is 'interrupt-controller@addr'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
We'll change the aplic DT nodename in the next patch and the name is
hardcoded in 2 different functions. Create a helper to change a single
place later.
While we're at it, in create_fdt_socket_aplic(), move 'aplic_name'
inside the conditional to avoid allocating a string that won't be used
when socket == NULL.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
We need #address-cells properties in all interrupt controllers that are
referred by an interrupt-map [1]. For the RISC-V machine, both PLIC and
APLIC controllers must have this property.
PLIC already sets it in create_fdt_socket_plic(). Set the property for
APLIC in create_fdt_one_aplic().
[1] https://lore.kernel.org/linux-arm-kernel/CAL_JsqJE15D-xXxmELsmuD+JQHZzxGzdXvikChn6KFWqk6NzPw@mail.gmail.com/
Suggested-by: Anup Patel <apatel@ventanamicro.com>
Fixes: e6faee65855b ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
vfio queue:
* Add a host IOMMU device abstraction
* VIRTIO-IOMMU/VFIO: Fix host iommu geometry handling
* QOMify VFIOContainer
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmZ541QACgkQUaNDx8/7
# 7KFdnQ/8Dih3HI2qtY93bTxg0lmJ+ZMibojTkEkTu3kSvwoI12wkiSMFKzzTWpZE
# UtGyIqQQij8IfQtIz87uQskv7oFiZKG6JWMTAX4uJ8ZIgZiih29/e/38VGEbogBh
# yO+1Pqr3ETlyLnQcu9ruBTJ293LXovmD4d9feoaVdURBNZ1EqIh7sv/y7YdUsR+i
# tXa6kW1ZIlKBI54o/uuODHWQYyOHs39VtZ6JZvgxVVEQsNikcJsosK9ts9A1EByi
# 0roQVXm2QAK/nPXlmMGLvJWzQcdeXQ6W6hzYkO2HqGnCLURnpW+y/ZVbNcxGOOiU
# 2G6L0TASlqA3yqCJeLuZZqjM6S2VbnvrA8omyg4QnygIHppYjp2CdcCmUpg6wfze
# rkgbVLNasX+le4ss2emuHPh55dLDP20yW83DeGeqSgE//foaJWhtOK/cnvs04zV2
# D6oSAVsOsZ6ozYlQckYnaxIBANDKLRnzCXVZLUCmHxCUhxHuiNJUsHfZYIv/Zxen
# C5ZjD/JPgx3onkoKbNfTRTgwOCdXhVPjWnnp7Su49jymsekqdk1ntln4ixDT3Vol
# ghQPQLjICBc8qXiOJAcFDwqLf/telPlzUUzvlDeC4BYMnpBAP6rQ3JJ8i0vCCiWv
# zKCtmbcDqDRMDpWyJWM3XA/kVKP9i2tNa1R/ej2SleCFLgRapBw=
# =3koe
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 02:21:24 PM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240624' of https://github.com/legoater/qemu: (42 commits)
vfio/container: Move vfio_container_destroy() to an instance_finalize() handler
vfio/container: Introduce vfio_iommu_legacy_instance_init()
vfio/container: Remove vfio_container_init()
vfio/container: Remove VFIOContainerBase::ops
vfio/container: Introduce an instance_init() handler
vfio/container: Switch to QOM
vfio/container: Change VFIOContainerBase to use QOM
vfio/container: Discover IOMMU type before creating the container
vfio/container: Introduce vfio_create_container()
vfio/container: Introduce vfio_get_iommu_class_name()
vfio/container: Modify vfio_get_iommu_type() to use a container fd
vfio/container: Simplify vfio_container_init()
vfio/container: Introduce vfio_address_space_insert()
vfio/common: Extract vIOMMU code from vfio_sync_dirty_bitmap()
vfio/common: Move dirty tracking ranges update to helper
vfio: Remove unused declarations from vfio-common.h
vfio: Make vfio_devices_dma_logging_start() return bool
memory: Remove IOMMU MR iommu_set_iova_range API
hw/vfio: Remove memory_region_iommu_set_iova_ranges() call
virtio-iommu: Remove the implementation of iommu_set_iova_range
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
SD/MMC patches queue
One fix and various cleanups for the SD card model.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZ5cRUACgkQ4+MsLN6t
# wN59Qw//cUdjD287pB5Ml5aQqr9sOTyVnHUceZtz7AOZ5w8RM2tlPDgOImeLOvU6
# OV7qfWvNaUxtQxhfh5jpe8Pj4eHBtRQzA6a1AWToEvnN4189QWHZpqf5TUa4AlFS
# uAk7k2TkoNv9zbNKca0bP3L1x6sT9l0VPZBLaLbgdXDIX2ycD0r3NVQxXb/bJRgM
# 6pFRcLCF/isKzLQDwqnTa11hB/JDTvOU7xnY0kazGRvyWjbSvE2sOJzLNJXHkW0I
# /FNfRbOKJo2t+47Z5qSXUFFLeIEBTy7VqNBsOQ6sMIgrWzbOSrtBcuxKp0p9NCGH
# fdZHlDVRnNGXewUya4RjbmXiCNuGL4zJ82b2BaQZVd5ZwU2opIr8xO96WCojQ4dZ
# +Dq3uv7su3PUVOh95i38Eo93OG9jXFx642XD4q2uKu5j70IoGXAkIoLUcFkZZdGS
# 9rCsaNUHyHJrN6nXf3Cekvkqxz36p6QXaUF9I1vB0JF6CrexMD35sBUK+RE9k4uW
# LnqL7ZwQDGDGVl3kPS/VCXv1mMim4aRLSEIveq7Ui6dKzaaJMIIodZ8CFMuyTTsD
# cGE+Cd053nf6SzX3+kEZftNdjtJ906O8xIAw+RNdARYx003l4kUxgsPDk7ELyzIP
# Tb+VlZl2P+ROJmeWvRMTW7ZQ49M9IEMrg8zlGF4hLCxB1JndeOA=
# =O5er
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 06:13:57 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240624' of https://github.com/philmd/qemu:
hw/sd/sdcard: Add comments around registers and commands
hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros
hw/sd/sdcard: Add sd_invalid_mode_for_cmd to report invalid mode switch
hw/sd/sdcard: Only call sd_req_get_address() where address is used
hw/sd/sdcard: Factor sd_req_get_address() method out
hw/sd/sdcard: Only call sd_req_get_rca() where RCA is used
hw/sd/sdcard: Factor sd_req_get_rca() method out
hw/sd/sdcard: Have cmd_valid_while_locked() return a boolean value
hw/sd/sdcard: Trace update of block count (CMD23)
hw/sd/sdcard: Remove explicit entries for illegal commands
hw/sd/sdcard: Remove ACMD6 handler for SPI mode
hw/sd/sdcard: Use Load/Store API to fill some CID/CSD registers
hw/sd/sdcard: Use registerfield CSR::CURRENT_STATE definition
hw/sd/sdcard: Use HWBLOCK_SHIFT definition instead of magic values
hw/sd/sdcard: Fix typo in SEND_OP_COND command name
hw/sd/sdcard: Rewrite sd_cmd_ALL_SEND_CID using switch case (CMD2)
hw/sd/sdcard: Correct code indentation
hw/sd/sdcard: Avoid OOB in sd_read_byte() during unexpected CMD switch
bswap: Add st24_be_p() to store 24 bits in big-endian order
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
vfio_container_destroy() clears the resources allocated
VFIOContainerBase object. Now that VFIOContainerBase is a QOM object,
add an instance_finalize() handler to do the cleanup. It will be
called through object_unref().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Just as we did for the VFIOContainerBase object, introduce an
instance_init() handler for the legacy VFIOContainer object and do the
specific initialization there.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
It's now empty.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Instead, use VFIO_IOMMU_GET_CLASS() to get the class pointer.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This allows us to move the initialization code from vfio_container_init(),
which we will soon remove.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Instead of allocating the container struct, create a QOM object of the
appropriate type.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
VFIOContainerBase was made a QOM interface because we believed that a
QOM object would expose all the IOMMU backends to the QEMU machine and
human interface. This only applies to user creatable devices or objects.
Change the VFIOContainerBase nature from interface to object and make
the necessary adjustments in the VFIO_IOMMU hierarchy.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Since the QEMU struct type representing the VFIO container is deduced
from the IOMMU type exposed by the host, this type should be well
defined *before* creating the container struct. This will be necessary
to instantiate a QOM object of the correct type in future changes.
Rework vfio_set_iommu() to extract the part doing the container
initialization and move it under vfio_create_container().
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This routine allocates the QEMU struct type representing the VFIO
container. It is minimal currently and future changes will do more
initialization.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Rework vfio_get_iommu_class() to return a literal class name instead
of a class object. We will need this name to instantiate the object
later on. Since the default case asserts, remove the error report as
QEMU will simply abort before.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
The 'container' pointer has no other use than its 'fd' attribute.
Simplify the prototype to ease future changes.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Assign the base container VFIOAddressSpace 'space' pointer in
vfio_address_space_insert(). The ultimate goal is to remove
vfio_container_init() and instead rely on an .instance_init() handler
to perfom the initialization of VFIOContainerBase.
To be noted that vfio_connect_container() will assign the 'space'
pointer later in the execution flow. This should not have any
consequence.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
It prepares ground for a future change initializing the 'space' pointer
of VFIOContainerBase. The goal is to replace vfio_container_init() by
an .instance_init() handler when VFIOContainerBase is QOMified.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
