aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2016-10-10virtio-net: handle virtio_net_receive() errorsGreg Kurz
All these errors are caused by a buggy guest: let's switch the device to the broken state instead of terminating QEMU. Also we detach the element from the virtqueue and free it. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-net: handle virtio_net_handle_ctrl() errorGreg Kurz
This error is caused by a buggy guest: let's switch the device to the broken state instead of terminating QEMU. Also we detach the element from the virtqueue and free it. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-blk: handle virtio_blk_handle_request() errorsGreg Kurz
All these errors are caused by a buggy guest: QEMU should not exit. With this patch, if virtio_blk_handle_request() detects a buggy request, it marks the device as broken and returns an error to the caller so it takes appropriate action. In the case of virtio_blk_handle_vq(), we detach the request from the virtqueue, free its allocated memory and stop popping new requests. We don't need to bother about multireq since virtio_blk_handle_request() errors out early and mrb.num_reqs == 0. In the case of virtio_blk_dma_restart_bh(), we need to detach and free all queued requests as well. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-9p: handle handle_9p_output() errorGreg Kurz
A broken guest may send a request without providing buffers for the reply or for the request itself, and virtqueue_pop() will return an element with either in_num == 0 or out_num == 0. All 9P requests are expected to start with the following 7-byte header: uint32_t size_le; uint8_t id; uint16_t tag_le; If iov_to_buf() fails to return these 7 bytes, then something is wrong in the guest. In both cases, it is wrong to crash QEMU, since the root cause lies in the guest. This patch hence does the following: - keep the check of in_num since pdu_complete() assumes it has enough space to store the reply and we will send something broken to the guest - let iov_to_buf() handle out_num == 0, since it will return 0 just like if the guest had provided an zero-sized buffer. - call virtio_error() to inform the guest that the device is now broken, instead of aborting - detach the request from the virtqueue and free it Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-blk: make some functions staticGreg Kurz
Some functions that were called from the dataplane code are now only used locally: virtio_blk_init_request() virtio_blk_handle_request() virtio_blk_submit_multireq() since commit "03de2f527499 virtio-blk: do not use vring in dataplane", and virtio_blk_free_request() since commit "6aa46d8ff1ee virtio: move VirtQueueElement at the beginning of the structs". This patch converts them to static. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-9p: add parentheses to sizeof operatorGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-serial: add missing virtio_detach_element() callStefan Hajnoczi
Ports enter a "throttled" state when writing to the chardev would block. The current output VirtQueueElement is kept around until the chardev becomes writable again. There are several places in the virtio-serial lifecycle where the VirtQueueElement should be thrown away. For example, if the virtio device is reset then virtqueue elements are no longer valid. This patch adds the discard_throttle_data() function to unmap the scatter-gather list and decrement vq->inuse. This ensures that the VirtQueueElement is freed properly. Cc: amit.shah@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-blk: add missing virtio_detach_element() callStefan Hajnoczi
Make sure to unmap the scatter-gather list and decrement vq->inuse before freeing requests in virtio_blk_reset(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio: add virtio_detach_element()Stefan Hajnoczi
During device reset or similar situations a VirtQueueElement needs to be freed without pushing it onto the used ring or rewinding the virtqueue. Extract a new function to do this. Later patches add virtio_detach_element() calls to existing device so that scatter-gather lists are unmapped and vq->inuse goes back to zero during device reset. Currently some devices don't bother and simply call g_free(elem) which is not a clean way to throw away a VirtQueueElement. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Reviewed-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10acpi: provide _PXM method for CPU devices if QEMU is started numa enabledIgor Mammedov
Workaround for long standing issue where Linux kernel assigns hotplugged CPU to 1st numa node as it discards proximity for possible CPUs from SRAT after it's parsed. _PXM method allows linux query proximity directly from hotplugged CPU object, which allows Linux to assing CPU to the correct numa node. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10numa: reduce code duplication by adding helper numa_get_node_for_cpu()Igor Mammedov
Replace repeated pattern for (i = 0; i < nb_numa_nodes; i++) { if (test_bit(idx, numa_info[i].node_cpu)) { ... break; with a helper function to lookup numa node index for cpu. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-serial: enable virtio console emergency write featureSascha Silbe
Add support for enabling the virtio 1.0 "emergency write" (VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced the plumbing required for this; now we expose the virtio feature to the guest. The feature is disabled for compatibility machines to avoid exposing a new feature to existing guests. As required by the virtio 1.0 spec, the emergency write functionality is available to the guest even if the guest doesn't negotatiate the feature, as well as before feature negotation. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-serial: add plumbing for virtio console emergency write supportSascha Silbe
Add the infrastructure required for the virtio 1.0 "emergency write" (VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the size of the configuration area, guests will not be able to actually make use of this without further patches. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-balloon: Remove needless precompiled directiveLiang Li
Since there in wrapper around madvise(), the virtio-balloon code is able to work without the precompiled directive, the directive can be removed. Signed-off-by: Liang Li <liang.z.li@intel.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reviewd-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-06hw/ppc/spapr: Use POWER8 by default for the pseries-2.8 machineThomas Huth
A couple of distributors are compiling their distributions with "-mcpu=power8" for ppc64le these days, so the user sooner or later runs into a crash there when not explicitely specifying the "-cpu POWER8" option to QEMU (which is currently using POWER7 for the "pseries" machine by default). Due to this reason, the linux-user target already switched to POWER8 a while ago (see commit de3f1b98410e0d5b406a0df3a48547b559d18602). Since the softmmu target of course has the same problem, we should switch there to POWER8 for the newer machine types, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-06spapr: fix check of cpu alias name in spapr_get_cpu_core_type()Greg Kurz
If the user passes an alias name and a property to -cpu, QEMU fails to find the CPU definition and exits. $ qemu-system-ppc64 -cpu POWER8E,compat=power7 qemu-system-ppc64: Unable to find sPAPR CPU Core definition This happens because spapr_get_cpu_core_type() passes the full string from the command line (i.e. "POWER8E,compat=power7") to ppc_cpu_lookup_alias(), instead of the alias name piece only (i.e. "POWER8E"). The fix is to pass model_pieces[0] to ppc_cpu_lookup_alias(). Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-05ppc: Check the availability of transactional memoryThomas Huth
KVM-PR currently does not support transactional memory, and the implementation in TCG is just a fake. We should not announce TM support in the ibm,pa-features property when running on such a system, so disable it by default and only enable it if the KVM implementation supports it (i.e. recent versions of KVM-HV). These changes are based on some earlier work from Anton Blanchard (thanks!). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-05hw/ppc/spapr: Fix the selection of the processor featuresThomas Huth
The current code uses pa_features_206 for POWERPC_MMU_2_06, and for everything else, it uses pa_features_207. This is bad in some cases because there is also a "degraded" MMU version of ISA 2.06, called POWERPC_MMU_2_06a, which should of course use the flags for 2.06 instead. And there is also the possibility that the user runs the pseries machine with a POWER5+ or even 970 processor. In that case we certainly do not want to set the flags for 2.07, and rather simply skip the setting of the pa-features property instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-05hw/ppc/spapr: Move code related to "ibm,pa-features" to a separate functionThomas Huth
The function spapr_populate_cpu_dt() has become quite big already, and since we likely have to extend the pa-features property for every new processor generation, it is nicer if we put the related code into a separate function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-05pseries: Add 2.8 machine type, set up compatibility macrosDavid Gibson
Now that 2.7 is released, create the pseries-2.8 machine type and add the boilerplate compatiblity macro stuff. There's nothing new to put into the 2.7 compatiliby properties yet, but we'll need something eventually, so we might as well get it ready now. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-05spapr_vscsi: fix build error introduced by f19661c8Felipe Franciosi
A typo introduced in f19661c8 prevents qemu from building when configured with --enable-trace-backend=dtrace. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-04Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Thu 29 Sep 2016 14:11:30 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: oslib-posix: add a configure switch to debug stack usage coroutine-sigaltstack: use helper for allocating stack memory coroutine-ucontext: use helper for allocating stack memory coroutine: add a macro for the coroutine stack size coroutine-sigaltstack: rename coroutine struct appropriately oslib-posix: add helpers for stack alloc and free block: Remove qemu_root_bds_opts block: Move 'discard' option to bdrv_open_common() block: Use 'detect-zeroes' option for 'blockdev-change-medium' block: Parse 'detect-zeroes' in bdrv_open_common() block/qapi: Move 'aio' option to file driver block/qapi: Use separate options type for curl driver block: Drop aio/cache consistency check from qmp_blockdev_add() block: Fix error path in qmp_blockdev_change_medium() block-backend: remove blk_flush_all qemu: use bdrv_flush_all for vm_stop et al block: reintroduce bdrv_flush_all Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04cadence_gem: Fix priority queue out of bounds accessAlistair Francis
There was an error with some of the register implementation assuming there are 16 priority queues supported when the IP only supports 8. This patch corrects the registers to only support 8 queues. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 33bf2d28326d22875602234b8b15cf56fb678333.1474911607.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04generic-loader: Add a generic loaderAlistair Francis
Add a generic loader to QEMU which can be used to load images or set memory values. Internally inside QEMU this is a device. It is a strange device that provides no hardware interface but allows QEMU to monkey patch memory specified when it is created. To be able to do this it has a reset callback that does the memory operations. This device allows the user to monkey patch memory. To be able to do this it needs a backend to manage the datas, the same as other memory-related devices. In this case as the backend is so trivial we have merged it with the frontend instead of creating and maintaining a seperate backend. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 10f2a9dce5e5e11b6c6d959415b0ad6ee22bcba5.1475195078.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04ARM: Virt: ACPI: Add GIC ITS description in ACPI MADT tableShannon Zhao
If GIC ITS is supported, add description in ACPI MADT table, then guest could use ITS when booting with ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1474616617-366-9-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04arm/virt: Add ITS to the virt boardPavel Fedin
If supported by the configuration, ITS will be added automatically. This patch also renames v2m_phandle to msi_phandle because it's now used by both MSI implementations. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1474616617-366-7-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulationPavel Fedin
The ITS control frame is in-kernel emulated while accesses to the GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI direct MSI injection advertised by the CAP_SIGNAL_MSI capability) the kvm_gsi_direct_mapping is explicitly set to false to emphasize the difference with GICv2M. Direct mapping cannot work with ITS since the content of the MSI data is not the target interrupt ID but an eventd id. GSI routing is advertised (kvm_gsi_routing_allowed) as well as msi/irqfd signaling (kvm_msi_via_irqfd_allowed). The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI ioctl. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1474616617-366-6-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/intc/arm_gicv3_its: Implement ITS base classPavel Fedin
This is the basic skeleton for both KVM and software-emulated ITS. Since we already prepare status structure, we also introduce complete VMState description. But, because we currently have no migratable implementations, we also set unmigratable flag. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1474616617-366-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/intc/arm_gic(v3)_kvm: Initialize gsi routingEric Auger
Advertise gsi routing and set up irqchip routing entries for GIC SPIs. This is not mandated as long as MSI routing is not used (because the kernel sets a default irqchip routing table). However once MSI routing gets used (for VIRTIO-PCI vhost for example), the first call to KVM_SET_GSI_ROUTING overrides the kernel default irqchip table. If no routing entry exists for the GSI, any IRQFD signaling for this GSI will fail. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1474616617-366-2-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/arm/virt: add 2.8 machine typeAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1474641676-25017-1-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04vmstateify tsc210xDr. David Alan Gilbert
I'm now saving all 3 of the pll entries; only 2 were saved before. There are a couple of times that were previously stored as offsets from 'now' calculated before saving; with vmstate it's easier to store the 'now' and fix it up on reload. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1474977735-10156-3-git-send-email-dgilbert@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04vmstateify tsc2005Dr. David Alan Gilbert
I've converted the fields in it's main data structure to fixed size types in ways that look sane. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1474977735-10156-2-git-send-email-dgilbert@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/arm: Fix Integrator/CM initializationJakub Jermar
Initialization of a class instance cannot depend on its own properties as these are not yet set. Move parts of integratorcm_init() that depend on the "memsz" property to the newly added integratorcm_realize(). This fixes: https://bugs.launchpad.net/qemu/+bug/1624726 Signed-off-by: Jakub Jermar <jakub@jermar.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04mainstone: Add mapping for dot, slash and backspace.Vijay Kumar B
Add missed out mappings. These mappings are from the "Intel PXA27x Processor Developer's Kit User Guide". Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Reviewed-by: Deepak S. <deepak@zilogic.com> Message-id: 1475063033-8176-3-git-send-email-vijaykumar@zilogic.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04mainstone: Fix incorrect key mapping for Enter key.Vijay Kumar B
According to the manual the (5, 5) corresponds to backspace key, and not Enter key. Linux kernel maps (5, 4) to the enter key. Fixing it up to match the mapping in the Linux kernel. Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Reviewed-by: Deepak S. <deepak@zilogic.com> Message-id: 1475063033-8176-2-git-send-email-vijaykumar@zilogic.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F205: Connect the SPI devicesAlistair Francis
Connect the SPI devices to the STM32F205 SoC. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: d05849120420f8db0d9aa053bd23134c33cd9180.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F205: Connect the ADC devicesAlistair Francis
Connect the ADC devices to the STM32F205 SoC. Signed-off-by: Alistair Francis <alistair@alistair23.me> Message-id: 6214eda399da7b47014f6f895be25323d52dbc9e.1474742262.git.alistair@alistair23.me Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04irq: Add a new irq device that allows the ORing of linesAlistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me> Message-id: 52e5d361e3b5a0ea8554aca73ee65ae2b586112e.1474742262.git.alistair@alistair23.me Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F2xx: Add the SPI deviceAlistair Francis
Add the STM32F2xx SPI device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8197811d5c94f814fa67c6a33ca2f7fd0aa97432.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F2xx: Add the ADC deviceAlistair Francis
Add the STM32F2xx ADC device. This device randomly generates values on each read. This also includes creating a hw/adc directory. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F2xx: Display PWM duty cycle from timerAlistair Francis
If correctly configured allow the STM32F2xx timer to print out the PWM duty cycle information. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: cdb59039a25e061615713a94b40797baa12ea9f9.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F205: Remove the individual device variablesAlistair Francis
Cleanup the individual DeviceState and SysBusDevice variables to re-use the same variable for each device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: fc5d75a57d320b69704df2c1146ff0fd482e4a88.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into stagingPeter Maydell
# gpg: Signature made Sun 02 Oct 2016 02:49:58 BST # gpg: using RSA key 0xCA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/for-upstream: docker: Build in a clean directory smbios: fix uuid copy xenpv: Fix qemu_uuid compiling error Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-30Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20160927' into ↵Peter Maydell
staging Couple of s390x patches: - some PCI cleanups - fix build error due to uuid rework - fix potential deadlock in sigp handling - enable ccw devices in BIOS and enforce checking in QEMU # gpg: Signature made Wed 28 Sep 2016 12:27:03 BST # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20160927: s390x/kvm: fix build against qemu_uuid s390x/css: {c,h,t,r,x}sch: require enable AND device number valid pc-bios/s390-ccw.img: rebuild image pc-bios/s390-ccw: enable subchannel for IPL I/O devices s390x/kvm: Fix potential deadlock in sigp handling s390x/pci: code cleanup s390x/pci: assign msix io region for each pci device s390x/pci: re-arrange variable declarations Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-30Merge remote-tracking branch 'remotes/yongbok/tags/mips-20160929' into stagingPeter Maydell
MIPS patches 2016-09-29 Changes: * MIPS Maintainer update * vmstateify rc4030 # gpg: Signature made Thu 29 Sep 2016 13:09:09 BST # gpg: using RSA key 0x2238EB86D5F797C2 # gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2 * remotes/yongbok/tags/mips-20160929: hw/dma: vmstateify rc4030 MAINTAINERS: update target-mips maintainers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-30Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell
# gpg: Signature made Thu 29 Sep 2016 21:13:46 BST # gpg: using RSA key 0x7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: ide: Fix memory leak in ide_register_restart_cb() MAINTAINERS: Add some more headers to the IDE section ahci: clear aiocb in ncq_cb ide: fix DMA register transitions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-29ide: Fix memory leak in ide_register_restart_cb()Ashijeet Acharya
Fix a memory leak in ide_register_restart_cb() in hw/ide/core.c and add idebus_unrealize() in hw/ide/qdev.c to have calls to qemu_del_vm_change_state_handler() to deal with the dangling change state handler during hot-unplugging ide devices which might lead to a crash. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1474995212-10580-1-git-send-email-ashijeetacharya@gmail.com [Minor whitespace fix --js] Signed-off-by: John Snow <jsnow@redhat.com>
2016-09-29ahci: clear aiocb in ncq_cbJohn Snow
Similar to existing fixes for IDE (87ac25fd) and ATAPI (7f951b2d), the AIOCB must be cleared in the callback. Otherwise, we may accidentally try to reset a dangling pointer in bdrv_aio_cancel() from a port reset. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1474575040-32079-2-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-09-29ide: fix DMA register transitionsJohn Snow
ATA8-APT defines the state transitions for both a host controller and for the hardware device during the lifecycle of a DMA transfer, in section 9.7 "DMA command protocol." One of the interesting tidbits here is that when a device transitions from DDMA0 ("Prepare state") to DDMA1 ("Data_Transfer State"), it can choose to set either BSY or DRQ to signal this transition, but not both. as ide_sector_dma_start is the last point in our preparation process before we begin the real data transfer process (for either AHCI or BMDMA), this is the correct transition point for DDMA0 to DDMA1. I have chosen !BSY && DRQ for QEMU to make the transition from DDMA0 the most obvious. Reported-by: Benjamin David Lunt <fys@fysnet.net> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Stefan Weil <sw@weilnetz.de> Message-id: 1470175541-19344-1-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-09-29block-backend: remove blk_flush_allJohn Snow
We can teach Xen to drain and flush each device as it needs to, instead of trying to flush ALL devices. This removes the last user of blk_flush_all. The function is therefore removed under the premise that any new uses of blk_flush_all would be the wrong paradigm: either flush the single device that requires flushing, or use an appropriate flush_all mechanism from outside of the BlkBackend layer. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-05 11:57:15 +0000