aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2010-06-13Move stdbool.hPaul Brook
Move inclusion of stdbool.h to common header files, instead of including in an ad-hoc manner. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-06-13hpet: Add MSI supportJan Kiszka
This implements the HPET capability of routing IRQs to the front-side bus, aka MSI support. This feature can be enabled via the qdev property "msi" and is off by default. Note that switching it on can cause guests (at least Linux) to use the HPET as timer instead of the LAPIC. KVM users should recall that only the latter is currently available as fast in-kernel model. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Make number of timers configurableJan Kiszka
One HPET block supports up to 32 timers. Allow to instantiate more than the recommended and implemented minimum of 3. The number is configured via the qdev property "timers". It is also saved/restored so that it need not match between migration peers. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13vmstate: Add VMSTATE_STRUCT_VARRAY_UINT8Jan Kiszka
Required for hpet. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Add support for level-triggered interruptsJan Kiszka
By implementing this feature we can also remove a nasty way to kill qemu (by trying to enable level-triggered hpet interrupts). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Drop static stateJan Kiszka
Instead of keeping a static reference around, pass the state to hpet_enabled and hpet_get_ticks. All callers now have it at hand. Will once allow to instantiate the HPET more than a single time. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet/rtc: Rework RTC IRQ replacement by HPETJan Kiszka
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push routing to IRQ8 completely into the HPET. This allows to turn hpet_in_legacy_mode() into a private function. Furthermore, this stops the RTC from clearing IRQ8 even if the HPET is in control. This patch comes with a side effect: The RTC timers will no longer be stoppend when there is no IRQ consumer, possibly causing a minor performance degration. But as the guest may want to redirect the RTC to the SCI in that mode, it should normally disable unused IRQ source anyway. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Start/stop timer when HPET_TN_ENABLE is modifiedJan Kiszka
We have to update the qemu timer when the per-timer enable bit is toggled, just like for HPET_CFG_ENABLE changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Convert to qdevJan Kiszka
Register the HPET as a sysbus device and create it that way. As it can route its IRQs to any ISA IRQ, we need to connect it to all 24 of them. Once converted to qdev, we can move reset handler and vmstate registration into its hands as well. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Move static timer field initializationJan Kiszka
Properly initialize HPETTimer::tn and HPETTimer::state once during hpet_init instead of (re-)writing them on every reset. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Silence warning on write to running main counterJan Kiszka
Setting the main counter while the HPET is enabled may not be a good idea of the guest, but it is supported and should, thus, not spam the host console with warnings. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Coding style cleanups and some refactoringsJan Kiszka
This moves the private HPET structures into the C module, simplifies some helper functions and fixes most coding style issues (biggest chunk was improper switch-case indention). No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Catch out-of-bounds timer accessJan Kiszka
Also prevent out-of-bounds write access to the timers but don't spam the host console if it triggers. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10esp: lower IRQ on soft resetBlue Swirl
42f1ced228c9b616cfa2b69846025271618e4ef5 removed irq lowering during reset. However, for chip reset command and DMA reset signal, its actually the correct thing to do. Lower IRQ on soft reset only. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10qbus: fix memory leak in qbus_free()Isaku Yamahata
BusState::name is allocated in qbus_create_inplace(). So it should be freed by qbus_free(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10multiboot: compilation fix with DEBUG_MULTIBOOT enabled.Isaku Yamahata
This patch fixes the following compilation errors in multiboot.c when DEBUG_MULTIBOOT is defined. Use TARGET_FMT_plx instead of %x for target_phys_addr_t. CC i386-softmmu/multiboot.o cc1: warnings being treated as errors qemu/hw/multiboot.c: In function 'mb_add_mod': qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 4 has type 'target_phys_addr_t' qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t' qemu/hw/multiboot.c: In function 'load_multiboot': qemu/hw/multiboot.c:279: error: format '%#x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t' qemu/hw/multiboot.c:307: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t' qemu/hw/multiboot.c:308: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t' make[1]: *** [multiboot.o] Error 1 Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10vga-isa-mm: remove one #ifdef CONFIG_BOCHS_VBE.Isaku Yamahata
remove one #ifdef CONFIG_BOCHS_VBE. Call vga_init_vbe() instead. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-06-10cris: Break out image loading to hw/cris-boot.c.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
2010-06-09hw: honor low bit in mipssim machineNathan Froyd
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-07virtio-net: truncating packetMichael S. Tsirkin
virtio net attempts to peek into virtio queue to determine that we have enough space for the complete packet to fit. However, it fails to account for space consumed by virtio net header when it does this, under stress this results in a failure with the message 'truncating packet'. redhat bz 591494. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-07petlogix-3adsp: Tweak displacement of cmdline and fdt blob.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-06-02virtio-net: stop vhost backend on vmstopMichael S. Tsirkin
vhost net currently keeps running after vmstop, which causes trouble as qemy does not check for dirty pages anymore. The fix is to simply keep vm and vhost running/stopped status in sync. Tested-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-01Monitor: Drop QMP documentation from codeLuiz Capitulino
Previous commit added QMP documentation to the qemu-monitor.hx file, it's is a copy of this information. While it's good to keep it near code, maintaining two copies of the same information is too hard and has little benefit as we don't expect client writers to consult the code to find how to use a QMP command. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-01Merge remote branch 'mst/for_anthony' into HEADAnthony Liguori
2010-06-01virtio-serial-bus: fix ports_map allocation on initAlon Levy
Fix for too small allocation to ports_map Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-31ioapic: improve debuggingBlue Swirl
Add a DPRINTF macro, use it also to see irq deliveries. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-31arm: fix arm kernel boot for non zero start addrLars Munch
Booting an arm kernel has been broken a while when booting from non zero start address. This is due to the order of events: board init loads the kernel and sets register 15 to the start address and then qemu_system_reset reset the cpu making register 15 zero again. This patch fixes the usage of the register 15 start address trick in combination with arm_load_kernel. Signed-off-by: Lars Munch <lars@segv.dk> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-31pci-hotplug: make them aware of pci domain.Isaku Yamahata
add helper function which converts root bus to pci domain. make them aware of pci domain. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31msix: remove duplicated defines.Isaku Yamahata
remove defines which are already defined in pci_regs.h Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci.h: remove unused constants.Isaku Yamahata
So remove unused constants, PCI_STATUS_RESERVED_MASK_LO, PCI_STATUS_RESERVED_MASK_HI, PCI_COMMAND_RESERVED, PCI_COMMAND_RESERVED_MASK_HI. They were used once, but they aren't used anymore. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci: add const to pci_is_express(), pci_config_size().Isaku Yamahata
add const to pci_is_express(), pci_config_size(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci: clean up of pci_set_default_subsystem_id().Isaku Yamahata
Use pci accessor function. don't return value because it always return 0 and the caller doesn't check the return value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-30mc146818rtc: improve debuggingBlue Swirl
Add a separate flag for debugging coalesced interrupts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29pc: improve debuggingBlue Swirl
Add a DPRINTF macro and use it for ISA and PIC interrupts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29apic: improve debuggingBlue Swirl
Add a DPRINTF macro. Use TARGET_FMT_plx for printing target_phys_addr_t items. Add a separate flag for debugging coalescing interrupts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29i8259: improve debuggingBlue Swirl
Add a DPRINTF macro. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29Pad iommu with an empty slot (necessary for SunOS 4.1.4)Artyom Tarasenko
On the real hardware (SS-5, LX) the MMU is not padded, but aliased. Software shouldn't use aliased addresses, neither should it crash when it uses (on the real hardware it wouldn't). Using empty_slot instead of aliasing can help with debugging such accesses. Signed-off-by: Artyom Tarasenko <atar4qemu@googlemail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-28Fix hw/gt64xxx.c compilation with DEBUG definedRiccardo Magliocchetti
Use TARGET_FMT_plx as format placeholder for target_phys_addr_t Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-28musicpal: Drop redundant reset callJan Kiszka
Reset is now triggered after init, no need for explicit calls anymore. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-28Fix overflow in i440fx_init()Avi Kivity
The ram_size parameter can be larger than an int, so it may be truncated. Fix by using the correct type. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-27vhost_net.c: v2 Fix build failure introduced by ↵Jes Sorensen
0bfcd599e3f5c5679cc7d0165a0a1822e2f60de2 Fix build failure introduced by 0bfcd599e3f5c5679cc7d0165a0a1822e2f60de2 The format statement expects unsigned long on x86_64, but receives unsigned long long, so gcc exits with an error. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-26sparc64: clean up pci bridge mapIgor V. Kovalenko
- remove unused host state and store pci bus pointer only - do not map host state access into unused 1fe.10000000 range - reorder pci region registration - assign pci i/o region to isa_mem_base Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-26sparc64: rename sun4u cpu to Ultrasparc IIiIgor V. Kovalenko
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-24use new cursor struct + functions for vmware vga and sdl.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24Virtio-net: Replace the hardcode 6 with defined ETN_ALENAmos Kong
hw/virtio-net.h: #define ETH_ALEN 6 ETH_ALEN was defined by commit 7967406801aa897fae83caad3278ac85a342adaa Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-05-24Merge remote branch 'qmp/for-anthony' into stagingAnthony Liguori
2010-05-24microblaze: Handle new elf mach nr for sysemu.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-05-22lsi: Fix value overflow in request tag processingJan Kiszka
This fixes a mismerge of 64d564094cac5f72eeaeb950c442b773a00d3586 (wrong patch version): We need to mask the tag value properly to obtain its device ID. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-02 11:25:46 +0000