aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2024-03-08hw/riscv/virt.c: create '/soc/pci@...' fdt node earlierDaniel Henrique Barboza
Hotplugged FDT nodes will attempt to write this node that, at this moment, is being created only in create_fdt_pcie() during finalize_fdt(). Create it earlier. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240217192607.32565-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-08hw/riscv/virt-acpi-build.c: Add SRAT and SLIT ACPI tablesHaibo Xu
Enable ACPI NUMA support by adding the following 2 ACPI tables: SRAT: provides the association for memory/Harts and Proximity Domains SLIT: provides the relative distance between Proximity Domains The SRAT RINTC Affinity Structure definition[1] was based on the recently approved ACPI CodeFirst ECR[2]. [1] https://github.com/riscv-non-isa/riscv-acpi/issues/25 [2] https://mantis.uefi.org/mantis/view.php?id=2433 Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20240129094200.3581037-1-haibo1.xu@intel.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-08hw: riscv: Allow large kernels to boot by moving the initrd further away in RAMAlexandre Ghiti
Currently, the initrd is placed at 128MB, which overlaps with the kernel when it is large (for example syzbot kernels are). From the kernel side, there is no reason we could not push the initrd further away in memory to accommodate large kernels, so move the initrd at 512MB when possible. The ideal solution would have been to place the initrd based on the kernel size but we actually can't since the bss size is not known when the image is loaded by load_image_targphys_as() and the initrd would then overlap with this section. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240206154042.514698-1-alexghiti@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-08hw/riscv/virt-acpi-build.c: Generate SPCR tableSia Jee Heng
Generate Serial Port Console Redirection Table (SPCR) for RISC-V virtual machine. Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240129021440.17640-3-jeeheng.sia@starfivetech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-08hw/arm/virt-acpi-build.c: Migrate SPCR creation to common locationSia Jee Heng
RISC-V should also generate the SPCR in a manner similar to ARM. Therefore, instead of replicating the code, relocate this function to the common AML build. Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240129021440.17640-2-jeeheng.sia@starfivetech.com> [ Changes by AF: - Add missing Language SPCR entry ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-07hw/rtc/sun4v-rtc: Relicense to GPLv2-or-laterPeter Maydell
The sun4v RTC device model added under commit a0e893039cf2ce0 in 2016 was unfortunately added with a license of GPL-v3-or-later, which is not compatible with other QEMU code which has a GPL-v2-only license. Relicense the code in the .c and the .h file to GPL-v2-or-later, to make it compatible with the rest of QEMU. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini (for Red Hat) <pbonzini@redhat.com> Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240223161300.938542-1-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-07hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoCInès Varhol
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240305210444.310665-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-07hw/gpio: Implement STM32L4x5 GPIOInès Varhol
Features supported : - the 8 STM32L4x5 GPIOs are initialized with their reset values (except IDR, see below) - input mode : setting a pin in input mode "externally" (using input irqs) results in an out irq (transmitted to SYSCFG) - output mode : setting a bit in ODR sets the corresponding out irq (if this line is configured in output mode) - pull-up, pull-down - push-pull, open-drain Difference with the real GPIOs : - Alternate Function and Analog mode aren't implemented : pins in AF/Analog behave like pins in input mode - floating pins stay at their last value - register IDR reset values differ from the real one : values are coherent with the other registers reset values and the fact that AF/Analog modes aren't implemented - setting I/O output speed isn't supported - locking port bits isn't supported - ADC function isn't supported - GPIOH has 16 pins instead of 2 pins - writing to registers LCKR, AFRL, AFRH and ASCR is ineffective Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240305210444.310665-2-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm/stm32l4x5_soc.c: Use the RCC SysclkArnaud Minier
Now that we can generate reliable clock frequencies from the RCC, remove the hacky definition of the sysclk in the b_l475e_iot01a initialisation code and use the correct RCC clock. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-8-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Add write protections to CR registerArnaud Minier
Add write protections for the fields in the CR register. PLL configuration write protections (among others) have not been handled yet. This is planned in a future patch set. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-7-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Handle Register UpdatesArnaud Minier
Update the RCC state and propagate frequency changes when writing to the RCC registers. Currently, ICSCR, CIER, the reset registers and the stop mode registers are not implemented. Some fields have not been implemented due to uncertainty about how to handle them (Like the clock security system or bypassing mecanisms). Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-6-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Initialize PLLs and clock multiplexersArnaud Minier
Instantiate the whole clock tree and using the Clock multiplexers and the PLLs defined in the previous commits. This allows to statically define the clock tree and easily follow the clock signal from one end to another. Also handle three-phase reset now that we have defined a known base state for every object. (Reset handling based on hw/misc/zynq_sclr.c) Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Add an internal PLL Clock objectArnaud Minier
This object represents the PLLs and their channels. The PLLs allow for a more fine-grained control of the clocks frequency. The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer objectArnaud Minier
This object is used to represent every multiplexer in the clock tree as well as every clock output, every presecaler, frequency multiplier, etc. This allows to use a generic approach for every component of the clock tree (except the PLLs). The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeletonArnaud Minier
Add the necessary files to add a simple RCC implementation with just reads from and writes to registers. Also instantiate the RCC in the STM32L4x5_SoC. It is needed for accurate emulation of all the SoC clocks and timers. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/char/pl011: Add support for loopbackTong Ho
This patch adds loopback for sent characters, sent BREAK, and modem-control signals. Loopback of send and modem-control is often used for uart self tests in real hardware but missing from current pl011 model, resulting in self-test failures when running in QEMU. This implementation matches what is observed in real pl011 hardware placed in loopback mode: 1. Input characters and BREAK events from serial backend are ignored, but 2. Both TX characters and BREAK events are still sent to serial backend, in addition to be looped back to RX. Signed-off-by: Tong Ho <tong.ho@amd.com> Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20240227054855.44204-1-tong.ho@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2Rayhan Faizel
BCM2835 has three I2C controllers. All of them share the same interrupt line. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/i2c: Implement Broadcom Serial Controller (BSC)Rayhan Faizel
A few deficiencies in the current device model need to be noted. 1. FIFOs are not used. All sends and receives are done directly. 2. Repeated starts are not emulated. Repeated starts can be triggered in real hardware by sending a new read transfer request in the window time between transfer active set of write transfer request and done bit set of the same. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240224191038.2409945-2-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05Merge tag 'pull-tcg-20240301' of https://gitlab.com/rth7680/qemu into stagingPeter Maydell
linux-user: Rewrite elf coredump tcg/aarch64: Apple does not align __int128_t in even registers accel/tcg: Fixes for page tables in mmio memory linux-user: Remove qemu_host_page_{size,mask}, HOST_PAGE_ALIGN migration: Remove qemu_host_page_size hw/tpm: Remove qemu_host_page_size softmmu: Remove qemu_host_page_{size,mask}, HOST_PAGE_ALIGN linux-user: Split and reorganize target_mmap. *-user: Deprecate and disable -p pagesize linux-user: Allow TARGET_PAGE_BITS_VARY target/alpha: Enable TARGET_PAGE_BITS_VARY for user-only target/arm: Enable TARGET_PAGE_BITS_VARY for AArch64 user-only target/ppc: Enable TARGET_PAGE_BITS_VARY for user-only linux-user: Remove pgb_dynamic alignment assertion tcg/optimize: fix uninitialized variable linux-user: Rewrite shmat # -----BEGIN PGP SIGNATURE----- # # iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXiXxQdHHJpY2hhcmQu # aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/H3QgApu4OgadviJuOBenT # yaGiq+iG4wTL5vVZFK8CgMtq59dJbgJSCooh7U8dn5hIhVuvOU7odUm6embt+4WZ # 0fDZIjrRvdDMM3LdLFhfdZszMNg6w2ceN9dn5iLkW3wxjRBpTzZNbxhh2Sg308+Q # oNd+MlYLijDvQP97+tlQ/PBtndLfV5FkpU74ZinWRgcpcT6oH9sP6TRlAVttefy7 # 3GsIXhDKGoDa/0Jpy86qE//3FUaVRqqcNlAIPXMf47ABQ2y2lZlwsfyty7s55sVW # KgdXdH1GiCgxIonVg4bYvovnwKVH5xHlpsJY48jQtBXR/4exPBFBpeTc422E0Sed # swpayg== # =W3pb # -----END PGP SIGNATURE----- # gpg: Signature made Fri 01 Mar 2024 23:04:52 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * tag 'pull-tcg-20240301' of https://gitlab.com/rth7680/qemu: (60 commits) tests/tcg: Check that shmat() does not break /proc/self/maps linux-user: Rewrite target_shmat linux-user: Add strace for shmat linux-user/loongarch64: Remove TARGET_FORCE_SHMLBA linux-user/x86_64: Handle the vsyscall page in open_self_maps_{2,4} tcg/optimize: fix uninitialized variable linux-user: Remove pgb_dynamic alignment assertion target/alpha: Enable TARGET_PAGE_BITS_VARY for user-only target/ppc: Enable TARGET_PAGE_BITS_VARY for user-only linux-user: Bound mmap_min_addr by host page size target/arm: Enable TARGET_PAGE_BITS_VARY for AArch64 user-only linux-user: Allow TARGET_PAGE_BITS_VARY accel/tcg: Disconnect TargetPageDataNode from page size cpu: Remove page_size_init *-user: Deprecate and disable -p pagesize tests/tcg: Extend file in linux-madvise.c tests/tcg: Remove run-test-mmap-* linux-user: Split out mmap_h_gt_g linux-user: Split out mmap_h_lt_g linux-user: Split out mmap_h_eq_g ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-01Merge tag 'pull-request-2024-03-01' of https://gitlab.com/thuth/qemu into ↵Peter Maydell
staging * Fix some bugs in the vring setup of libqos * Fix GIC settings when using --without-default-devices * Fix USB PCAP streams on Windows * Remove temporary files from test-util-sockets * Fix TLS io channels sending too much data to the backend # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXhjBcRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbWzZw/+OTSsKg6JTX0z3fjL6If+Ns/EnFiniHHI # y1jR7fPub3ybFokgHIWrRVG+9ol+1tJuPlO5Bsx1SKFzNC8++l1iyK7E25xnmp2P # Ry/Z0ZSWp3JWCtLm6km5pKl3wWI9p0XwfUOJbCWYM5dOsd2a4C4DSvjcwNXR7pTB # 4AxXFj5G5UwXuffgPnBzeerm5baNweSqa/uczUY6Od+iJwmHpaSk0SJ4NIlIYvnS # z3BH81trQAoKYZyywp0aF+jH9w3YNwD1XDp2Bcf3qSWDdokN55V13yyiSllTfUwX # Lq3fotoLqFJL0A4m8a3TdCKMP8ReoJATSriPHJmGMgqWGTnvtRBIsx1pmMpYRB6U # EltaKW0WXeQAad0ZYGl4odx7kQUQjdc8HTQRTevQD9g3XpZZN0o9MfTPdM2eR5h6 # xaS8UEc61YJAcmD27Ir92JGGGMLBTYz4OGLx3Rj7l7S759GQ67qih9TGcE9nqSj+ # +wAHfiOjUZnSWnp7Hq4M/TIjNh0BuyBW4oRBASaikjjQ82Hih5bPTdRu1J8lYuXC # PhN8dLwdk0NMrnnHuFDKq/sXjDeXF3Hg0AmtVvOGiB2z2OeVSPtMxl/YgniGVTbj # CHXDqDrBAa7i6WxAo+TtUgE20iVz5uYzGqHmxTNpq6FzIRb1uvHksbjFlin79Pkw # eF0Dj80zxAY= # =9JAI # -----END PGP SIGNATURE----- # gpg: Signature made Fri 01 Mar 2024 08:04:39 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2024-03-01' of https://gitlab.com/thuth/qemu: chardev/char-socket: Fix TLS io channels sending too much data to the backend tests/unit/test-util-sockets: Remove temporary file after test hw/usb/bus.c: PCAP adding 0xA in Windows version hw/intc/Kconfig: Fix GIC settings when using "--without-default-devices" libqos/virtio.c: fix 'avail_event' offset in qvring_init() libqos/virtio.c: init all elems in qvring_indirect_desc_setup() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-01Merge tag 'pull-loongarch-20240229' of https://gitlab.com/gaosong/qemu into ↵Peter Maydell
staging pull-loongarch-20240229 V2: fix build error on mipsel # -----BEGIN PGP SIGNATURE----- # # iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZeBrwAAKCRBAov/yOSY+ # 33YXA/4+A5Bpe/3+mSAWZSUlluGTqUi0ILBYRMyX1RXovMx4uCRGr7PXzAf03yKS # MZzlVzTuOK69WmTm/iTdYWOxkXisC3gzxL/wm8hP4lzh4c0dHrHRsKHqq6gR3+t2 # ojdZn7TefeflnNqIhxXxgxb1OETofhBNnBJ74pvqxO7XV5SWnA== # =J2Kb # -----END PGP SIGNATURE----- # gpg: Signature made Thu 29 Feb 2024 11:34:24 GMT # gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF # gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF * tag 'pull-loongarch-20240229' of https://gitlab.com/gaosong/qemu: loongarch: Change the UEFI loading mode to loongarch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-01hw/usb/bus.c: PCAP adding 0xA in Windows versionBenjamin David Lunt
Since Windows text files use CRLFs for all \n, the Windows version of QEMU inserts a CR in the PCAP stream when a LF is encountered when using USB PCAP files. This is due to the fact that the PCAP file is opened as TEXT instead of BINARY. To show an example, when using a very common protocol to USB disks, the BBB protocol uses a 10-byte command packet. For example, the READ_CAPACITY(10) command will have a command block length of 10 (0xA). When this 10-byte command (part of the 31-byte CBW) is placed into the PCAP file, the Windows file manager inserts a 0xD before the 0xA, turning the 31-byte CBW into a 32-byte CBW. Actual CBW: 0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0a 25 USBC...........% 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ............... PCAP CBW 0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0d 0a USBC............ 0050 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 %.............. I believe simply opening the PCAP file as BINARY instead of TEXT will fix this issue. Resolves: https://bugs.launchpad.net/qemu/+bug/2054889 Signed-off-by: Benjamin David Lunt <benlunt@fysnet.net> Message-ID: <000101da6823$ce1bbf80$6a533e80$@fysnet.net> [thuth: Break long line to avoid checkpatch.pl error] Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-01hw/intc/Kconfig: Fix GIC settings when using "--without-default-devices"Thomas Huth
When using "--without-default-devices", the ARM_GICV3_TCG and ARM_GIC_KVM settings currently get disabled, though the arm virt machine is only of very limited use in that case. This also causes the migration-test to fail in such builds. Let's make sure that we always keep the GIC switches enabled in the --without-default-devices builds, too. Message-ID: <20240221110059.152665-1-thuth@redhat.com> Tested-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-02-29hw/tpm: Remove HOST_PAGE_ALIGN from tpm_ppi_initRichard Henderson
This removes a hidden use of qemu_host_page_size, hoisting two uses of qemu_real_host_page_size to a local variable. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Helge Deller <deller@gmx.de>
2024-02-29loongarch: Change the UEFI loading mode to loongarchXianglai Li
The UEFI loading mode in loongarch is very different from that in other architectures:loongarch's UEFI code is in rom, while other architectures' UEFI code is in flash. loongarch UEFI can be loaded as follows: -machine virt,pflash=pflash0-format -bios ./QEMU_EFI.fd Other architectures load UEFI using the following methods: -machine virt,pflash0=pflash0-format,pflash1=pflash1-format loongarch's UEFI loading method makes qemu and libvirt incompatible when using NVRAM, and the cost of loongarch's current loading method far outweighs the benefits, so we decided to use the same UEFI loading scheme as other architectures. Cc: Andrea Bolognani <abologna@redhat.com> Cc: maobibo@loongson.cn Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Song Gao <gaosong@loongson.cn> Cc: zhaotianrui@loongson.cn Signed-off-by: Xianglai Li <lixianglai@loongson.cn> Tested-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2024-02-28Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu ↵Peter Maydell
into staging Migration pull request - Fabiano's fixed-ram patches (1-5 only) - Peter's cleanups on multifd tls IOC referencing - Steve's cpr patches for vfio (migration patches only) - Fabiano's fix on mbps stats racing with COMPLETE state - Fabiano's fix on return path thread hang # -----BEGIN PGP SIGNATURE----- # # iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl # ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E # HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0= # =P2QF # -----END PGP SIGNATURE----- # gpg: Signature made Wed 28 Feb 2024 05:11:10 GMT # gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706 # gpg: issuer "peterx@redhat.com" # gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal] # gpg: aka "Peter Xu <peterx@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706 * tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (25 commits) migration: Use migrate_has_error() in close_return_path_on_source() migration: Join the return path thread before releasing to_dst_file migration: Fix qmp_query_migrate mbps value migration: options incompatible with cpr migration: update cpr-reboot description migration: stop vm for cpr migration: notifier error checking migration: refactor migrate_fd_connect failures migration: per-mode notifiers migration: MigrationNotifyFunc migration: remove postcopy_after_devices migration: MigrationEvent for notifiers migration: convert to NotifierWithReturn migration: remove error from notifier data notify: pass error to notifier with return migration/multifd: Drop unnecessary helper to destroy IOC migration/multifd: Cleanup outgoing_args in state destroy migration/multifd: Make multifd_channel_connect() return void migration/multifd: Drop registered_yank migration/multifd: Cleanup TLS iochannel referencing ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-28Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* target/i386: Fix physical address truncation on 32-bit PAE * Remove globals for options -no-fd-bootchk and -win2k-hack # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmXebwQUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroPozAf/Vgc9u6C+8PcPDrol6qxjI+EOHLNy # 7M3/OFpUkwLXuOSawb6syYxHpLS38fKRcsb2ninngUmbRWA6p+KNUizlAFMj7op5 # wJmtdamCwCwXXaw20SfWxx2Ih0JS7FQsRsU94HTOdaDB17C9+hBcYwcggsOAXCmq # gyVenEF1mov2A4jLMhdVIRX784AAoEP+QAuhBKQBrQwRLCTTyNdHl7jXdB9w+2sh # KafokoFLcozJHz/tN3AhRKy6zjPugJyQmJwBRuj9tstCILtXpvf/ZE/3pUq5l3ZY # A6dCI0zWAlGNTkpKRXsMFozNIVP2htnyidy29XHptlY5acfjtQ++rMu3BQ== # =WY4H # -----END PGP SIGNATURE----- # gpg: Signature made Tue 27 Feb 2024 23:23:48 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: ide, vl: turn -win2k-hack into a property on IDE devices ide: collapse parameters to ide_init_drive target/i386: leave the A20 bit set in the final NPT walk target/i386: remove unnecessary/wrong application of the A20 mask target/i386: Fix physical address truncation target/i386: use separate MMU indexes for 32-bit accesses target/i386: introduce function to query MMU indices target/i386: check validity of VMCB addresses target/i386: mask high bits of CR3 in 32-bit mode vl, pc: turn -no-fd-bootchk into a machine property Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-28plugins: create CPUPluginState and migrate plugin_maskAlex Bennée
As we expand the per-vCPU data for plugins we don't want to pollute CPUState. For now this just moves the plugin_mask (renamed to event_mask) as the memory callbacks are accessed directly by TCG generated code. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-23-alex.bennee@linaro.org>
2024-02-28cpu: call plugin init hook asynchronouslyPierrick Bouvier
This ensures we run during a cpu_exec, which allows to call start/end exclusive from this init hook (needed for new scoreboard API introduced later). async work is run before any tb is translated/executed, so we can guarantee plugin init will be called before any other hook. The previous change made sure that any idle/resume cb call will not be done before initializing plugin for a given vcpu. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240213094009.150349-5-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-20-alex.bennee@linaro.org>
2024-02-28gdbstub: Simplify XML lookupAkihiko Odaki
Now we know all instances of GDBFeature that is used in CPU so we can traverse them to find XML. This removes the need for a CPU-specific lookup function for dynamic XMLs. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231213-gdb-v17-7-777047380591@daynix.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-12-alex.bennee@linaro.org>
2024-02-28migration: MigrationNotifyFuncSteve Sistare
Define MigrationNotifyFunc to improve type safety and simplify migration notifiers. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-7-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28migration: MigrationEvent for notifiersSteve Sistare
Passing MigrationState to notifiers is unsound because they could access unstable migration state internals or even modify the state. Instead, pass the minimal info needed in a new MigrationEvent struct, which could be extended in the future if needed. Suggested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-5-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28migration: convert to NotifierWithReturnSteve Sistare
Change all migration notifiers to type NotifierWithReturn, so notifiers can return an error status in a future patch. For now, pass NULL for the notifier error parameter, and do not check the return value. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-4-git-send-email-steven.sistare@oracle.com [peterx: dropped unexpected update to roms/seabios-hppa] Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28migration: remove error from notifier dataSteve Sistare
Remove the error object from opaque data passed to notifiers. Use the new error parameter passed to the notifier instead. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-3-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28notify: pass error to notifier with returnSteve Sistare
Pass an error object as the third parameter to "notifier with return" notifiers, so clients no longer need to bundle an error object in the opaque data. The new parameter is used in a later patch. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28ide, vl: turn -win2k-hack into a property on IDE devicesPaolo Bonzini
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-28ide: collapse parameters to ide_init_drivePaolo Bonzini
All calls to ide_init_drive comes from ide_dev_initfn. Just pass down the IDEDevice (IDEState is kinda obsolete and should be merged into IDEDevice). Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-28vl, pc: turn -no-fd-bootchk into a machine propertyPaolo Bonzini
Add a fd-bootchk property to PC machine types, so that -no-fd-bootchk returns an error if the machine does not support booting from floppies and checking for boot signatures therein. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-27Merge tag 'pull-target-arm-20240227-1' of ↵Peter Maydell
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Handle atomic updates of page tables entries in MMIO during PTW * Advertise Cortex-A53 erratum #843419 fix via REVIDR * MAINTAINERS: Cover hw/ide/ahci-allwinner.c with AllWinner A10 machine * misc: m48t59: replace qemu_system_reset_request() call with watchdog_perform_action() * misc: pxa2xx_timer: replace qemu_system_reset_request() call with watchdog_perform_action() * xlnx-versal-ospi: disable reentrancy detection for iomem_dac * sbsa-ref: Simplify init since PCIe is always enabled * stm32l4x5: Use TYPE_OR_IRQ when connecting STM32L4x5 EXTI fan-in IRQs * pl031: Update last RTCLR value on write in case it's read back * block: m25p80: Add support of mt35xu02gbba * xlnx-versal-virt: Add machine property ospi-flash * reset: refactor system reset to be three-phase aware * new board model raspi4b # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmXeAMEZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3syyD/4lJzzstbDIAsu94Z4Hi0So # CFLAMJFsPy3fMsU2IqVP+TDTyhUeMPebwfj7sQHUtQcXVh5i1/HlYgdUgXsnjGWQ # pc6BxycpW6uJWYb7Ma3CdSGS+hxEpQ+U8Qeijwqg0kAqhjNtrSIkTRQ4u8p8T+kN # dWtQzp7D15BpEVhWl/2dLWWJwV3H6TThmr1FbK5wl/c7hJzy2uaXqmmCvercU0Zo # 6ab3SnGyhaujdd/FsDvhnVEYqcmcO2p9UtSnGAbdfw0zsf4p8cS2Q6M9q4DHBFYn # 6Bt51DFP5D+114VpqRSXF2Lv9K8swjTgqhDld9vCoios6pS3LMwcTAcONUxE8JU+ # uD7kXTN/lv3atNEy4MTFkTeNtKgbYJJuPwWrDRNdbVXPwrEHGWN3+ZYISmuYb+p+ # XL2/7HeP7/qEVMW2d18+7OCriZwKiBRZRKUrtG7mQSBZEMetbhpA+mLcxAZT0FAl # 18O/mcvEJrrE7x6Bqyv96b8PE0/er5cVg/b/wrkKS8DL4NWU9bJSjJNRrvt9bvvl # jSzPGo4ngHlfO0OpurLoFOZCVxKWVXgaKkQ3pOz301nsDyhEndNLeCxrITac8G2Q # C/WQuMaeOoV1x7N2MzaCQmyRzy8yGkG9av0aI/8feobfV/Yg4wPsfhcEn/XQWXKv # NUJ4/z78FbJlI2JeDP2QSA== # =xaMv # -----END PGP SIGNATURE----- # gpg: Signature made Tue 27 Feb 2024 15:33:21 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240227-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits) docs/system/arm: Add RPi4B to raspi.rst hw/misc/bcm2835_property: Add missed BCM2835 properties tests/avocado/boot_linux_console.py: Add Rpi4b boot tests hw/arm/bcm2838_peripherals: Add clock_isp stub hw/arm: Add memory region for BCM2837 RPiVid ASB hw/arm/raspi4b: Temporarily disable unimplemented rpi4b devices hw/arm: Introduce Raspberry PI 4 machine hw/arm: Add GPIO and SD to BCM2838 periph hw/gpio: Connect SD controller to BCM2838 GPIO hw/gpio: Implement BCM2838 GPIO functionality hw/gpio: Add BCM2838 GPIO stub hw/arm/bcm2838: Add GIC-400 to BCM2838 SoC hw/arm: Introduce BCM2838 SoC hw/arm/raspi: Split out raspi machine common part hw/arm/bcm2853_peripherals: Split out common part of peripherals hw/arm/bcm2836: Split out common part of BCM283X classes docs/devel/reset: Update to discuss system reset hw/core/machine: Use qemu_register_resettable for sysbus reset hw/core/reset: Implement qemu_register_reset via qemu_register_resettable hw/core/reset: Add qemu_{register, unregister}_resettable() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27Merge tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu into ↵Peter Maydell
staging aspeed queue: * Add support for UART0, in preparation of AST2700 models # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmXd2nMACgkQUaNDx8/7 # 7KErPBAAjKRmJQF9aMEgf7uqsPnJojAVumFe63NE9Gqnvy4MzgoZWfdSnLl2Ddba # im5IfR7MYv0tzJtqCVtz7o4JwXhhDwesWALQZBM/ms48aacPSNP+7Gn141yLuCCS # Vr8NBSIz156lSsnFGnRUArcQTDKjDp/1TLRiGcS8SDm/S4Nn++nur+T054EZgbKR # CMWDeavgzZRb9HPepvWDwqb9qs11hq5/onCqC886dVNznxEKAVYcd0FVbSn3OfDF # 2EPvKh+fxHlW37wcctlGPnbJK5rRvFi78yZf5utSt+mlVhyiEXjQJ6p8zBIh2w5A # NlsmUo/UYv1F41yC/vCFRR8KJ2wO5VW7zL6UCGMV6I9hxhu/Qw+FYqWdBbAZWsOO # GFOkFbe8zbJFXTr/W7P5upBlA7U1/B9VbRj71eu01dqT+n8OGsk8yfnWVs1SjpoD # 89ZIhpb7lSolQmjPPxrVyfUe3/8ncTx64+CZuAZjxPh/9HA8wDXwVRPtAbIvvGaZ # YPQ4Qmd4m6nAANAvTg2ufj19WT64XKwrQ6O3IkmGcn0BzHl08GFjru8IUp6rbduG # m6WqulL1Ej1PrYaiw5ktpJ4Fkoy6iEFXJOWfl3oTLp2KWE5VAohyRKI00AFnHiAC # frK+cxT4bqDtJR8QbNyJy5d3ZGZV1R6ZA0XjQ1jtb8ty2qISysw= # =gFeX # -----END PGP SIGNATURE----- # gpg: Signature made Tue 27 Feb 2024 12:49:55 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu: aspeed: fix hardcode boot address 0 aspeed: introduce a new UART0 device name Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/misc/bcm2835_property: Add missed BCM2835 propertiesSergey Kambalin
Our model of the bcm2835 mailbox is missing a few properties that we need for the raspi4 kernel: * RPI_FWREQ_GET_CLOCKS * RPI_FWREQ_GET_THROTTLED * RPI_FWREQ_VCHIQ_INIT Add minimal implementations of them. Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Message-id: 20240226000259.2752893-40-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: improved commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2838_peripherals: Add clock_isp stubSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Add memory region for BCM2837 RPiVid ASBSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-13-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/raspi4b: Temporarily disable unimplemented rpi4b devicesSergey Kambalin
This commit adds RPi4B device tree modifications: - disable pcie, rng200, thermal sensor and genet devices (they're going to be re-enabled in the following commits) - create additional memory region in device tree if RAM amount exceeds VC base address. Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-12-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Introduce Raspberry PI 4 machineSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-11-sergey.kambalin@auriga.com [PMM: Change name to 'raspi4b', not 'raspi4b-2g'] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Add GPIO and SD to BCM2838 periphSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-10-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/gpio: Connect SD controller to BCM2838 GPIOSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-9-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/gpio: Implement BCM2838 GPIO functionalitySergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-8-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/gpio: Add BCM2838 GPIO stubSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-7-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2838: Add GIC-400 to BCM2838 SoCSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-6-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 04:44:51 +0000