aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2017-01-06fsl_etsec: Fix Tx BD ring wrapping handlingAndrey Smirnov
Current code that handles Tx buffer desciprtor ring scanning employs the following algorithm: 1. Restore current buffer descriptor pointer from TBPTRn 2. Process current descriptor 3. If current descriptor has BD_WRAP flag set set current descriptor pointer to start of the descriptor ring 4. If current descriptor points to start of the ring exit the loop, otherwise increment current descriptor pointer and go to #2 5. Store current descriptor in TBPTRn The way the code is implemented results in buffer descriptor ring being scanned starting at offset/descriptor #0. While covering 99% of the cases, this algorithm becomes problematic for a number of edge cases. Consider the following scenario: guest OS driver initializes descriptor ring to N individual descriptors and starts sending data out. Depending on the volume of traffic and probably guest OS driver implementation it is possible that an edge case where a packet, spread across 2 descriptors is placed in descriptors N - 1 and 0 in that order(it is easy to imagine similar examples involving more than 2 descriptors). What happens then is aforementioned algorithm starts at descriptor 0, sees a descriptor marked as BD_LAST, which it happily sends out as a separate packet(very much malformed at this point) then the iteration continues and the first part of the original packet is tacked to the next transmission which ends up being bogus as well. This behvaiour can be pretty reliably observed when scp'ing data from a guest OS via TAP interface for files larger than 160K (every time for 700K+). This patch changes the scanning algorithm to do the following: 1. Restore "current" buffer descriptor pointer from TBPTRn 2. If "current" descriptor does not have BD_TX_READY set, goto #6 3. Process current descriptor 4. If "current" descriptor has BD_WRAP flag set "current" descriptor pointer to start of the descriptor ring otherwise set increment "current" by the size of one descriptor 5. Goto #1 6. Save "current" buffer descriptor in TBPTRn This way we preserve the information about which descriptor was processed last and always start where we left off avoiding the original problem. On top of that, judging by the following excerpt from MPC8548ERM (p. 14-48): "... When the end of the TxBD ring is reached, eTSEC initializes TBPTRn to the value in the corresponding TBASEn. The TBPTR register is internally written by the eTSEC’s DMA controller during transmission. The pointer increments by eight (bytes) each time a descriptor is closed successfully by the eTSEC..." revised algorithm might also a more correct way of emulating this aspect of eTSEC peripheral. Cc: Alexander Graf <agraf@suse.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Jason Wang <jasowang@redhat.com> Cc: qemu-devel@nongnu.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-06rtl8139: correctly handle PHY resetHervé Poussineau
According to datasheet: "[Bit 15 of Basic Mode Control Register] sets the status and control registers of the PHY (register 0062-0074) in a default state. This bit is self-clearing. 1 = software reset; 0 = normal operation." This fixes the netcard detection failure in Minoca OS. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-05Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed 04 Jan 2017 13:29:09 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: iothread: add poll-grow and poll-shrink parameters aio: self-tune polling time virtio: disable virtqueue notifications during polling aio: add .io_poll_begin/end() callbacks virtio: turn vq->notification into a nested counter virtio-scsi: suppress virtqueue kick during processing virtio-blk: suppress virtqueue kick during processing iothread: add polling parameters linux-aio: poll ring for completions virtio: poll virtqueues for new buffers aio: add polling mode to AioContext aio: add AioPollFn and io_poll() interface aio: add flag to skip fds to aio_dispatch() HACKING: document #include order Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-05Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into stagingPeter Maydell
- transport specific callbacks (for Xen) - fix crash (2.8 regression) - 9p functional tests # gpg: Signature made Tue 03 Jan 2017 17:30:58 GMT # gpg: using DSA key 0x02FC3AEB0101DBC2 # gpg: Good signature from "Greg Kurz <groug@kaod.org>" # gpg: aka "Greg Kurz <groug@free.fr>" # gpg: aka "Greg Kurz <gkurz@fr.ibm.com>" # gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>" # gpg: aka "Gregory Kurz (Groug) <groug@free.fr>" # gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>" # gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2 * remotes/gkurz/tags/for-upstream: tests: virtio-9p: ".." cannot be used to walk out of the shared directory tests: virtio-9p: no slash in path elements during walk tests: virtio-9p: add walk operation test tests: virtio-9p: add attach operation test tests: virtio-9p: add version operation test 9pfs: fix P9_NOTAG and P9_NOFID macros tests: virtio-9p: code refactoring tests: virtio-9p: rename PCI configuration test 9pfs: fix crash when fsdev is missing 9pfs: introduce init_out/in_iov_from_pdu 9pfs: call v9fs_init_qiov_from_pdu before v9fs_pack 9pfs: introduce transport specific callbacks 9pfs: move pdus to V9fsState Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-05Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20170103-1' into ↵Peter Maydell
staging virtio-gpu: misc bugfixes. # gpg: Signature made Tue 03 Jan 2017 14:48:04 GMT # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-vga-20170103-1: virtio-gpu: fix memory leak in resource attach backing virtio-gpu-3d: fix memory leak in resource attach backing virtio-gpu: call cleanup mapping function in resource destroy virtio-gpu: track and limit host memory allocations display: virtio-gpu-3d: check virgl capabilities max_size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-03virtio: disable virtqueue notifications during pollingStefan Hajnoczi
This is a performance optimization to eliminate vmexits during polling. It also avoids spurious ioeventfd processing after polling ends. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-12-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio: turn vq->notification into a nested counterStefan Hajnoczi
Polling should disable virtqueue notifications but that requires nested virtio_queue_set_notification() calls. Turn vq->notification into a counter so it is possible to do nesting. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-10-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio-scsi: suppress virtqueue kick during processingStefan Hajnoczi
The guest does not need to kick the virtqueue while we are processing it. This reduces the number of vmexits during periods of heavy I/O. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-9-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio-blk: suppress virtqueue kick during processingStefan Hajnoczi
The guest does not need to kick the virtqueue while we are processing it. This reduces the number of vmexits during periods of heavy I/O. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-8-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio: poll virtqueues for new buffersStefan Hajnoczi
Add an AioContext poll handler to detect new virtqueue buffers without waiting for a guest->host notification. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-5-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: add AioPollFn and io_poll() interfaceStefan Hajnoczi
The new AioPollFn io_poll() argument to aio_set_fd_handler() and aio_set_event_handler() is used in the next patch. Keep this code change separate due to the number of files it touches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-039pfs: fix P9_NOTAG and P9_NOFID macrosGreg Kurz
The u16 and u32 types don't exist in QEMU common headers. It never broke build because these two macros aren't use by the current code, but this is about to change with the future addition of functional tests for 9P. Also, these should have enclosing parenthesis to be usable in any syntactical situation. As suggested by Eric Blake, let's use UINT16_MAX and UINT32_MAX to address both issues. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: fix crash when fsdev is missingGreg Kurz
If the user passes -device virtio-9p without the corresponding -fsdev, QEMU dereferences a NULL pointer and crashes. This is a 2.8 regression introduced by commit 702dbcc274e2c. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2017-01-039pfs: introduce init_out/in_iov_from_pduStefano Stabellini
Not all 9pfs transports share memory between request and response. For those who don't, it is necessary to know how much memory is required in the response. Split the existing init_iov_from_pdu function in two: init_out_iov_from_pdu (for writes) and init_in_iov_from_pdu (for reads). init_in_iov_from_pdu takes an additional size parameter to specify the memory required for the response message. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: call v9fs_init_qiov_from_pdu before v9fs_packStefano Stabellini
v9fs_xattr_read should not access VirtQueueElement elems directly. Move v9fs_init_qiov_from_pdu up in the file and call v9fs_init_qiov_from_pdu before v9fs_pack. Use v9fs_pack on the new iovec. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: introduce transport specific callbacksStefano Stabellini
Don't call virtio functions from 9pfs generic code, use generic function callbacks instead. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: move pdus to V9fsStateStefano Stabellini
pdus are initialized and used in 9pfs common code. Move the array from V9fsVirtioState to V9fsState. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03virtio-gpu: fix memory leak in resource attach backingLi Qiang
In the resource attach backing function, everytime it will allocate 'res->iov' thus can leading a memory leak. This patch avoid this. Signed-off-by: Li Qiang <liq3ea@gmail.com> Message-id: 1483003721-65360-1-git-send-email-liq3ea@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-01-03virtio-gpu-3d: fix memory leak in resource attach backingLi Qiang
If the virgl_renderer_resource_attach_iov function fails the 'res_iovs' will be leaked. Add check of the return value to free the 'res_iovs' when failing. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1482999086-59795-1-git-send-email-liq3ea@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-01-03virtio-gpu: call cleanup mapping function in resource destroyLi Qiang
If the guest destroy the resource before detach banking, the 'iov' and 'addrs' field in resource is not freed thus leading memory leak issue. This patch avoid this. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1480386565-10077-1-git-send-email-liq3ea@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-27hw/i2c: Add a NULL check for i2c slave init callbacksAlastair D'Silva
Add a NULL check for i2c slave init callbacks, so that we no longer need to implement empty init functions. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Message-id: 20161202054617.6749-4-alastair@au1.ibm.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: squashed in later tweak from Alistair to if() phrasing] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27hw/arm: remove trailing whitespaceAlastair D'Silva
Remove trailing whitespace in hw/arm/pxa2xx.c Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Message-id: 20161202054617.6749-3-alastair@au1.ibm.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed/smc: set the number of flash modules for the FMC controllerCédric Le Goater
Add a new configuration field at the board level and propagate the value using the "num-cs" property of the FMC controller model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1480434248-27138-14-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed/smc: improve segment register supportCédric Le Goater
The HW does not enforce all the rules in the specs and allows a few "curious" setups like zero size segments and overlaps. So change the model to be in sync but keep the warnings which are always interesting for debug. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1480434248-27138-13-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed/scu: fix SCU region sizeCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-12-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: change SoC revision of the palmetto-bmc machineCédric Le Goater
The palmetto BMC machine uses a AST2400 revision A1 SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-11-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: add the definitions for the AST2400 A1 SoCCédric Le Goater
There is not much differences with the A0 revision apart from the DDR calibration. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-10-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: add a memory region for SRAMCédric Le Goater
The size of the SRAM depends on the SoC model, so use a per-soc definition when creating the region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-9-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: add support for the romulus-bmc boardCédric Le Goater
The Romulus machine is an OpenPOWER system with an AST2500 SoC for the BMC and a POWER9 chip for the host. It does not make much difference for qemu a part from the fact that the FMC controller has two SPI flash module. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1480434248-27138-8-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: extend the board configuration with flash modelsCédric Le Goater
Future machine will use different flash models for the FMC and the SPI controllers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: attach the second SPI controller object to the SoCCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: remove cannot_destroy_with_object_finalize_yetCédric Le Goater
With commit ce5b1bbf624b ("exec: move cpu_exec_init() calls to realize functions"), we can now remove cannot_destroy_with_object_finalize_yet. Suggested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1480434248-27138-5-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: QOMify the CPU object and attach it to the SoCCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27m25p80: add support for the mx66l1g45gCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Marcin Krzeminski <marcin.krzeminski@nokia.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27hw/arm/virt: add 2.9 machine typePeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com>
2016-12-27hw/intc/arm_gicv3: Don't signal Pending+Active interrupts to CPUPeter Maydell
The GICv3 requires that we only signal Pending interrupts to the CPU. This category does not include Pending+Active interrupts, which means we need to check whether the interrupt is Active in the gicr_int_pending() and gicd_int_pending() functions. Interrupts are rarely in the Active+Pending state, but KVM uses this as part of its handling of the virtual timer, so this bug was causing KVM to go into an infinite loop of taking the vtimer interrupt when the guest first triggered it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-12-27hw/intc/arm_gicv3: Remove incorrect usage of fieldoffsetPeter Maydell
In the ARMCPRegInfo definitions for the GICv3 CPU interface registers, we were trying to use .fieldoffset to specify the locations of data fields within the GICv3CPUState struct. This is completely broken, because .fieldoffset is for offsets into the CPUARMState struct. We didn't notice because we were only using this for reads to BPR0, AP0R<n>, IGRPEN0 and CTLR_EL3, and Linux doesn't use these registers. Replace the .fieldoffset uses with explicit read functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-12-27hw/intc/arm_gicv3_common: fix aff3 in typerAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20161209143703.29457-1-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27cadence_uart: Check if receiver timeout counter is disabledAndrew Gacek
When register Rcvr_timeout_reg0 (R_RTOR in cadence_uart.c) is set to 0, the receiver timeout counter should be disabled. See page 1801 of "Zynq-7000 AP SoC Technical Reference Manual". This commit adds a such a check before setting the receive timeout interrupt. Signed-off-by: Andrew Gacek <andrew.gacek@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27cadence_uart: Check baud rate generator and divider values on migrationAlistair Francis
The Cadence UART device emulator calculates speed by dividing the baud rate by a 'baud rate generator' & 'baud rate divider' value. The device specification defines these register values to be non-zero and within certain limits. Checks were recently added when writing to these registers but not when restoring from migration. This patch adds checks when restoring from migration to avoid divide by zero errors. Reported-by: Huawei PSIRT <psirt@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 04ae30ed8ee1758cd2d2af880da4d28f74c67738.1481132150.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-22kvmclock: reduce kvmclock difference on migrationMarcelo Tosatti
Check for KVM_CAP_ADJUST_CLOCK capability KVM_CLOCK_TSC_STABLE, which indicates that KVM_GET_CLOCK returns a value as seen by the guest at that moment. For new machine types, use this value rather than reading from guest memory. This reduces kvmclock difference on migration from 5s to 0.1s (when max_downtime == 5s). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Message-Id: <20161121105052.598267440@redhat.com> [Add comment explaining what is going on. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22scsi-disk: fix VERIFY for scsi-blockPaolo Bonzini
When a scsi-disk object receives VERIFY command with BYTCHK bit being zero, scsi_block_is_passthrough returns false and finally makes req being proceeded by scsi_block_dma_command. Because scsi_block_dma_command has removed process of VERIFY, QEMU will abort in this function. Reported-by: Junlian Bell <zhongjun@sangfor.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22hw/block/pflash_cfi*.c: fix confusing assert fail messageZiyue Yang
The patch is to fix the confusing assert fail message caused by un-initialized device structure (from bite sized tasks). The bug can be reproduced by ./qemu-system-x86_64 -nographic -device cfi.pflash01 The CFI hardware is dynamically loaded by QOM realizing mechanism, however the realizing function in pflash_cfi01_realize function requires the device being initialized manually before calling, like ./qemu-system-x86_64 -nographic -device cfi.pflash01,num-blocks=1024,sector-length=4096,name=testcard Once the initializing parameters are left off in the command, it will leave the device structure not initialized, which makes pflash_cfi01_realize try to realize a zero-volume card, causing /mnt/EXT_volume/projects/qemu/qemu-dev/exec.c:1378: find_ram_offset: Assertion `size != 0\' failed. Through my test, at least the flash device's block-number, sector-length and its name is needed for pflash_cfi01_realize to behave correctly. So I think the new asserts are needed to hint the QEMU user to specify the device's parameters correctly. Signed-off-by: Ziyue Yang <skiver.cloud.yzy@gmail.com> Message-Id: <1481810693-13733-1-git-send-email-skiver.cloud.yzy@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ziyue Yang <yzylivezh@hotmail.com>
2016-12-22multiboot: copy the cmdline verbatim, unescape module stringsVlad Lungu
get_opt_value() truncates the value at the first comma Use memcpy() instead so that -append works correctly in the presence of commas. For -initrd to work right, instead, unescape the module filename and parameters with get_opt_value() before calling mb_add_cmdline(). Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com> Message-Id: <1481805124-16242-1-git-send-email-vlad.lungu@windriver.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22pc: make pit configurableChao Peng
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <1478330391-74060-4-git-send-email-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22pc: make sata configurableChao Peng
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <1478330391-74060-3-git-send-email-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22pc: make smbus configurableChao Peng
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <1478330391-74060-2-git-send-email-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22virtio-scsi: introduce virtio_scsi_acquire/releasePaolo Bonzini
These will be used more as soon as the acquire/release is pushed down to the ioeventfd handlers. Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22watchdog: 6300esb: add exit functionLi Qiang
When the Intel 6300ESB watchdog is hot unplug. The timer allocated in realize isn't freed thus leaking memory leak. This patch avoid this through adding the exit function. Signed-off-by: Li Qiang <liqiang6-s@360.cn> Message-Id: <583cde9c.3223ed0a.7f0c2.886e@mx.google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 09:47:42 +0000