aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2023-06-09hw/i386/microvm: Simplify using object_dynamic_cast()Philippe Mathieu-Daudé
Use object_dynamic_cast() to determine if 'dev' is a TYPE_VIRTIO_MMIO. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-09hw/core/cpu: Simplify realize() using MACHINE_GET_CLASS() macroPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-09hw/remote: Fix vfu_cfg trace offset formatMattias Nissler
The printed offset value is prefixed with 0x, but was actually printed in decimal. To spare others the confusion, adjust the format specifier to hexadecimal. Signed-off-by: Mattias Nissler <mnissler@rivosinc.com> Reviewed-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-09hw/virtio/virtio-qmp.c: spelling: suppotedMichael Tokarev
Fixes: f3034ad71fcd0a6a58bc37830f182b307f089159 Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de>
2023-06-089pfs: prevent opening special files (CVE-2023-2861)Christian Schoenebeck
The 9p protocol does not specifically define how server shall behave when client tries to open a special file, however from security POV it does make sense for 9p server to prohibit opening any special file on host side in general. A sane Linux 9p client for instance would never attempt to open a special file on host side, it would always handle those exclusively on its guest side. A malicious client however could potentially escape from the exported 9p tree by creating and opening a device file on host side. With QEMU this could only be exploited in the following unsafe setups: - Running QEMU binary as root AND 9p 'local' fs driver AND 'passthrough' security model. or - Using 9p 'proxy' fs driver (which is running its helper daemon as root). These setups were already discouraged for safety reasons before, however for obvious reasons we are now tightening behaviour on this. Fixes: CVE-2023-2861 Reported-by: Yanwu Shen <ywsPlz@gmail.com> Reported-by: Jietao Xiao <shawtao1125@gmail.com> Reported-by: Jinku Li <jkli@xidian.edu.cn> Reported-by: Wenbo Shen <shenwenbo@zju.edu.cn> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Message-Id: <E1q6w7r-0000Q0-NM@lizzy.crudebyte.com>
2023-06-07Merge tag 'pull-xen-20230607' of ↵Richard Henderson
https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging Xen queue - fix for xen-block segv - Resolve TYPE_PIIX3_XEN_DEVICE - Xen emulation build/Coverity fixes # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmSAkU0ACgkQDPVXL9f7 # Va/mMQf9Hs8pFGz7qRMc8RbuBvwVNGcdqOKZN+sbBKPb2pp9X8gkP5EV5SMLF/eu # CjaoZU+SsZcVLZ0HZ/TevAEuMrflZeeRfneJzEcl58cwOxo5l18puRwy9iDxfh6m # goqGGxQA2OmUa5eVZ7WX2JXo0wG/RQqqc/pChKbPAsTT9/QE23irOQBdUDf7sbGP # WFI/LoLR0c6NNbQyZNWSP0e/+es8ztq+Is7Bl6d1fdG/6YeXK2yVaro1gyMmxKAm # EKuvI9qva2ilV5RJEc/gB/x4PuIVCPizkrbB8XClQ81Szo49x55ChPdnpT5i7Sqd # qjFWO2plgV/gXri1/RTCzyBujeuCOA== # =E1Qb # -----END PGP SIGNATURE----- # gpg: Signature made Wed 07 Jun 2023 07:16:45 AM PDT # gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF # gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [unknown] # gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8 # Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF * tag 'pull-xen-20230607' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm: xen-block: fix segv on unrealize hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICE hw/isa/piix3: Resolve redundant k->config_write assignments hw/isa/piix3: Avoid Xen-specific variant of piix3_write_config() hw/isa/piix3: Wire up Xen PCI IRQ handling outside of PIIX3 hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize() hw/pci/pci.c: Don't leak PCIBus::irq_count[] in pci_bus_irqs() include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq() hw/xen: Fix broken check for invalid state in xs_be_open() xen: Drop support for Xen versions below 4.7.1 hw/xen: Fix memory leak in libxenstore_open() for Xen hw/xen: Simplify emulated Xen platform init Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-07vfio-user: update commentsJagannathan Raman
Clarify the behavior of TYPE_VFU_OBJECT when TYPE_REMOTE_MACHINE enables the auto-shutdown property. Also, add notes to VFU_OBJECT_ERROR. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-06-07xen-block: fix segv on unrealizeAnthony PERARD
Backtrace: qemu_lockcnt_lock (lockcnt=0xb4) at ../util/lockcnt.c:238 aio_set_fd_handler (ctx=0x0, fd=51, is_external=true, io_read=0x0, io_write=0x0, io_poll=0x0, io_poll_ready=0x0, opaque=0x0) at ../util/aio-posix.c:119 xen_device_unbind_event_channel (xendev=0x55c6da5b5000, channel=0x55c6da6c4c80, errp=0x7fff641ac608) at ../hw/xen/xen-bus.c:926 xen_block_dataplane_stop (dataplane=0x55c6da6ddbe0) at ../hw/block/dataplane/xen-block.c:719 xen_block_disconnect (xendev=0x55c6da5b5000, errp=0x0) at ../hw/block/xen-block.c:48 xen_block_unrealize (xendev=0x55c6da5b5000) at ../hw/block/xen-block.c:154 xen_device_unrealize (dev=0x55c6da5b5000) at ../hw/xen/xen-bus.c:956 xen_device_exit (n=0x55c6da5b50d0, data=0x0) at ../hw/xen/xen-bus.c:985 notifier_list_notify (list=0x55c6d91f9820 <exit_notifiers>, data=0x0) at ../util/notify.c:39 qemu_run_exit_notifiers () at ../softmmu/runstate.c:760 Fixes: f6eac904f682 ("xen-block: implement BlockDevOps->drained_begin()") Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230606131605.55596-1-anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICEBernhard Beschow
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of TYPE_PIIX3_DEVICE. Remove this redundancy. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-7-shentey@gmail.com> Message-Id: <20230403074124.3925-8-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Resolve redundant k->config_write assignmentsBernhard Beschow
The previous patch unified handling of piix3_write_config() accross the PIIX3 device models which allows for assigning k->config_write once in the base class. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-6-shentey@gmail.com> Message-Id: <20230403074124.3925-7-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Avoid Xen-specific variant of piix3_write_config()Bernhard Beschow
Subscribe to pci_bus_fire_intx_routing_notifier() instead which allows for having a common piix3_write_config() for the PIIX3 device models. While at it, move the subscription into machine code to facilitate resolving TYPE_PIIX3_XEN_DEVICE. In a possible future followup, pci_bus_fire_intx_routing_notifier() could be adjusted in such a way that subscribing to it doesn't require knowledge of the device firing it. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-5-shentey@gmail.com> Message-Id: <20230403074124.3925-6-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Wire up Xen PCI IRQ handling outside of PIIX3Bernhard Beschow
xen_intx_set_irq() doesn't depend on PIIX3State. In order to resolve TYPE_PIIX3_XEN_DEVICE and in order to make Xen agnostic about the precise south bridge being used, set up Xen's PCI IRQ handling of PIIX3 in the board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-4-shentey@gmail.com> Message-Id: <20230403074124.3925-5-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize()Bernhard Beschow
This is a preparational patch for the next one to make the following more obvious: First, pci_bus_irqs() is now called twice in case of Xen where the second call overrides the pci_set_irq_fn with the Xen variant. Second, pci_bus_set_route_irq_fn() is now also called in Xen mode. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-3-shentey@gmail.com> Message-Id: <20230403074124.3925-4-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/pci/pci.c: Don't leak PCIBus::irq_count[] in pci_bus_irqs()Bernhard Beschow
When calling pci_bus_irqs() multiple times on the same object without calling pci_bus_irqs_cleanup() in between PCIBus::irq_count[] is currently leaked. Let's fix this because Xen will do just that in a few commits, and because calling pci_bus_irqs_cleanup() in between seems fragile and cumbersome. Note that pci_bus_irqs_cleanup() now has to NULL irq_count such that pci_bus_irqs() doesn't do a double free. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230403074124.3925-3-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq()Bernhard Beschow
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device while xen_piix3_set_irq() maps multiple PCI devices to their respective IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate this. Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's IOAPIC rather than PIIX has this many interrupt routes. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-2-shentey@gmail.com> Message-Id: <20230403074124.3925-2-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/xen: Fix broken check for invalid state in xs_be_open()David Woodhouse
Coverity points out that if (!s && !s->impl) isn't really what we intended to do here. CID 1508131. Fixes: 032475127225 ("hw/xen: Add emulated implementation of XenStore operations") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230412185102.441523-6-dwmw2@infradead.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07xen: Drop support for Xen versions below 4.7.1David Woodhouse
In restructuring to allow for internal emulation of Xen functionality, I broke compatibility for Xen 4.6 and earlier. Fix this by explicitly removing support for anything older than 4.7.1, which is also ancient but it does still build, and the compatibility support for it is fairly unintrusive. Fixes: 15e283c5b684 ("hw/xen: Add foreignmem operations to allow redirection to internal emulation") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20230412185102.441523-4-dwmw2@infradead.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/xen: Fix memory leak in libxenstore_open() for XenDavid Woodhouse
There was a superfluous allocation of the XS handle, leading to it being leaked on both the error path and the success path (where it gets allocated again). Spotted by Coverity (CID 1508098). Fixes: ba2a92db1ff6 ("hw/xen: Add xenstore operations to allow redirection to internal emulation") Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20230412185102.441523-3-dwmw2@infradead.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/xen: Simplify emulated Xen platform initDavid Woodhouse
I initially put the basic platform init (overlay pages, grant tables, event channels) into mc->kvm_type because that was the earliest place that could sensibly test for xen_mode==XEN_EMULATE. The intent was to do this early enough that we could then initialise the XenBus and other parts which would have depended on them, from a generic location for both Xen and KVM/Xen in the PC-specific code, as seen in https://lore.kernel.org/qemu-devel/20230116221919.1124201-16-dwmw2@infradead.org/ However, then the Xen on Arm patches came along, and *they* wanted to do the XenBus init from a 'generic' Xen-specific location instead: https://lore.kernel.org/qemu-devel/20230210222729.957168-4-sstabellini@kernel.org/ Since there's no generic location that covers all three, I conceded to do it for XEN_EMULATE mode in pc_basic_devices_init(). And now there's absolutely no point in having some of the platform init done from pc_machine_kvm_type(); we can move it all up to live in a single place in pc_basic_devices_init(). This has the added benefit that we can drop the separate xen_evtchn_connect_gsis() function completely, and pass just the system GSIs in directly to xen_evtchn_create(). While I'm at it, it does no harm to explicitly pass in the *number* of said GSIs, because it does make me twitch a bit to pass an array of impicit size. During the lifetime of the KVM/Xen patchset, that had already changed (albeit just cosmetically) from GSI_NUM_PINS to IOAPIC_NUM_PINS. And document a bit better that this is for the *output* GSI for raising CPU0's events when the per-CPU vector isn't available. The fact that we create a whole set of them and then only waggle the one we're told to, instead of having a single output and only *connecting* it to the GSI that it should be connected to, is still non-intuitive for me. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20230412185102.441523-2-dwmw2@infradead.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-06Merge tag 'pull-target-arm-20230606' of ↵Richard Henderson
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Support gdbstub (guest debug) in HVF * xnlx-versal: Support CANFD controller * bpim2u: New board model: Banana Pi BPI-M2 Ultra * Emulate FEAT_LSE2 * allow DC CVA[D]P in user mode emulation * trap DCC access in user mode emulation # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB # fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz # TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync # 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7 # bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z # njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9 # lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri # pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC # zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn # iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO # Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj # MzinCABXHcovJbGbxZ9j6w== # =8SdN # -----END PGP SIGNATURE----- # gpg: Signature made Tue 06 Jun 2023 02:47:17 AM PDT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown] * tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm: (42 commits) target/arm: trap DCC access in user mode emulation tests/tcg/aarch64: add DC CVA[D]P tests target/arm: allow DC CVA[D]P in user mode emulation target/arm: Enable FEAT_LSE2 for -cpu max tests/tcg/multiarch: Adjust sigbus.c tests/tcg/aarch64: Use stz2g in mte-7.c target/arm: Move mte check for store-exclusive target/arm: Relax ordered/atomic alignment checks for LSE2 target/arm: Add SCTLR.nAA to TBFLAG_A64 target/arm: Check alignment in helper_mte_check target/arm: Pass single_memop to gen_mte_checkN target/arm: Pass memop to gen_mte_check1* target/arm: Hoist finalize_memop out of do_fp_{ld, st} target/arm: Hoist finalize_memop out of do_gpr_{ld, st} target/arm: Load/store integer pair with one tcg operation target/arm: Sink gen_mte_check1 into load/store_exclusive target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r target/arm: Use tcg_gen_qemu_st_i128 for STZG, STZ2G target/arm: Use tcg_gen_qemu_{st, ld}_i128 for do_fp_{st, ld} target/arm: Use tcg_gen_qemu_ld_i128 for LDXP ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-06Merge tag 'pull-request-2023-06-06' of https://gitlab.com/thuth/qemu into ↵Richard Henderson
staging * Fix emulated LCCB, LOCFHR, MXDB and MXDBR s390x instructions * Fix the malta machine on s390x (big endian) hosts * Emulate /proc/cpuinfo on s390x * Remove pointless QOM casts * Improve the inclusion logic for libkeyutils and ipmi-bt-test in meson.build # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmR+ycgRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbWXXw//WPz3ng50KLS+M1t3/ULEjO6XkGfP2LQZ # RsZq3hf9THFPZgcREk+6SQvttOSTuvHNfakfujS6U1Ou5thReWqLe4itFW6+hB5j # kQ+Sm6YJ+fpezkBnSefcUoL5nA9VVKZ6KE6kxq5CUBZNoIk1sSsfrU8y8wjzW0yg # 2nraOcG10aLpO2BfvKHVEAhJtwl9pHJsFANmHC2/h2wC9BZIAzdxiytzdcJ909gN # AAa0hIrLK/oFgJjkSSxu+QTaVGPARXqkx5WV546F/zmDMFUWd9nrXaegwqxjgPBN # m9Ua0SXll5hX2Z57vjJWlbTYkD+JUB22L0N7p5/xzhYRpLVSq1pdveo9psrzIC3E # Bt7chZB58acQepJHxxa3UHDOHcnfdfaN+Dd9wD29wHr7nK8lOcsen7/7V+5YXomc # qenkCtkpjKTl07OBxe6MDGZtPZYA8fK1CjEyYwHCe8QvxEzsyg96Bm3j4N2VPxQU # +f/sFPX7SgogZI4mB4wdoxOF1RmQ+DXQ2tnB970txZRkmFq2jJHpW86jkkbq2Jl1 # KIjgdIXjVgy+MPtuQzO5cT+jfhGQL7FQynGXHjv/UidBid5XD3TDVNa9AthN3Mng # +rPT90VJ7j9soMqvmNT1COSIRD+M49dQKBIQuq/gWplaTOHaAcJrCwYScwqe0u0P # zmjCNeuPVw8= # =dfJr # -----END PGP SIGNATURE----- # gpg: Signature made Mon 05 Jun 2023 10:53:12 PM PDT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [unknown] # gpg: aka "Thomas Huth <thuth@redhat.com>" [unknown] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2023-06-06' of https://gitlab.com/thuth/qemu: linux-user: Emulate /proc/cpuinfo on s390x linux-user/elfload: Introduce elf_hwcap_str() on s390x linux-user/elfload: Expose get_elf_hwcap() on s390x s390x/tcg: Fix CPU address returned by STIDP bulk: Remove pointless QOM casts scripts: Add qom-cast-macro-clean-cocci-gen.py hw/mips/malta: Fix the malta machine on big endian hosts gitlab-ci: Remove unused Python package tests/qtest: Run ipmi-bt-test only if CONFIG_IPMI_EXTERN is set tests/tcg/s390x: Test MXDB and MXDBR target/s390x: Fix MXDB and MXDBR Add conditional dependency for libkeyutils tests/tcg/s390x: Test single-stepping SVC linux-user/s390x: Fix single-stepping SVC tests/tcg/s390x: Test LOCFHR target/s390x: Fix LOCFHR taking the wrong half of R2 tests/tcg/s390x: Test LCBB target/s390x: Fix LCBB overwriting the top 32 bits Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-06hw: arm: allwinner-sramc: Add SRAM Controller support for R40qianfan Zhao
Only a few important registers are added, especially the SRAM_VER register. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-r40: Add emac and gmac supportqianfan Zhao
R40 has two ethernet controllers named as emac and gmac. The emac is compatibled with A10, and the GMAC is compatibled with H3. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: sd: allwinner-sdhost: Add sun50i-a64 SoC supportqianfan Zhao
A64's sd register was similar to H3, and it introduced a new register named SAMP_DL_REG location at 0x144. The dma descriptor buffer size of mmc2 is only 8K and the other mmc controllers has 64K. Also fix allwinner-r40's mmc controller type. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/arm/allwinner-r40: add SDRAM controller deviceqianfan Zhao
Types of memory that the SDRAM controller supports are DDR2/DDR3 and capacities of up to 2GiB. This commit adds emulation support of the Allwinner R40 SDRAM controller. This driver only support 256M, 512M and 1024M memory now. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/misc: Rename axp209 to axp22x and add support AXP221 PMUqianfan Zhao
This patch adds minimal support for AXP-221 PMU and connect it to bananapi M2U board. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-r40: Add i2c0 deviceqianfan Zhao
TWI(i2c) is designed to be used as an interface between CPU host and the serial 2-Wire bus. It can support all standard 2-Wire transfer, can be operated in standard mode(100kbit/s) or fast-mode, supporting data rate up to 400kbit/s. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: allwinner-r40: Complete uart devicesqianfan Zhao
R40 has eight UARTs, support both 16450 and 16550 compatible modes. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/arm/allwinner-r40: add Clock Control Unitqianfan Zhao
The CCU provides the registers to program the PLLs and the controls most of the clock generation, division, distribution, synchronization and gating. This commit adds support for the Clock Control Unit which emulates a simple read/write register interface. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: Add bananapi M2-Ultra and allwinner-r40 supportqianfan Zhao
Allwinner R40 (sun8i) SoC features a Quad-Core Cortex-A7 ARM CPU, and a Mali400 MP2 GPU from ARM. It's also known as the Allwinner T3 for In-Car Entertainment usage, A40i and A40pro are variants that differ in applicable temperatures range (industrial and military). Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06xlnx-versal: Connect Xilinx VERSAL CANFD controllersVikram Garhwal
Connect CANFD0 and CANFD1 on the Versal-virt machine and update xlnx-versal-virt document with CANFD command line examples. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/net/can: Introduce Xilinx Versal CANFD controllerVikram Garhwal
The Xilinx Versal CANFD controller is developed based on SocketCAN, QEMU CAN bus implementation. Bus connection and socketCAN connection for each CAN module can be set through command lines. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-05bulk: Remove pointless QOM castsPhilippe Mathieu-Daudé
Mechanical change running Coccinelle spatch with content generated from the qom-cast-macro-clean-cocci-gen.py added in the previous commit. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230601093452.38972-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-05hw/mips/malta: Fix the malta machine on big endian hostsThomas Huth
Booting a Linux kernel with the malta machine is currently broken on big endian hosts. The cpu_to_gt32 macro wants to byteswap a value for little endian targets only, but uses the wrong way to do this: cpu_to_[lb]e32 works the other way round on big endian hosts! Fix it by using the same ways on both, big and little endian hosts. Fixes: 0c8427baf0 ("hw/mips/malta: Use bootloader helper to set BAR registers") Cc: qemu-stable@nongnu.org Message-Id: <20230330152613.232082-1-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-05Merge tag 'qemu-sparc-20230605' of https://github.com/mcayland/qemu into stagingRichard Henderson
qemu-sparc queue # -----BEGIN PGP SIGNATURE----- # # iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmR9xHseHG1hcmsuY2F2 # ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfFsgH/0lV2y9CphGdWwtV # S/00CRhp5n0kv3P2m4yDvXBhBgMa8zS6m/ZHhcfuU5xOxkJAnPudvXiZucHP4TSy # 6KFBgVi2+xBW1YJf2UEHlBG2cDnVDHtYQze6Ak3S+W5sVeZZU8n1k8k8kRwpuNDS # io23oKXzzKMYErlwy12bEHEF7vpfcG9HktjpJxUtppkNDuPTysyKSA6BavEm3mJC # MlIypbxqxgBvu2SJETeP/m1yLQOaswViCNkqNqUH+MgEc1ubtSCXEuXTfSHIsxLR # 224kRPFciY1sm3NvG9yz75UYSq1JUvUC5mNIIqwjb4MZJ+YHqFb3S/6ilCYChQ8V # IBPyvH0= # =pxbI # -----END PGP SIGNATURE----- # gpg: Signature made Mon 05 Jun 2023 04:18:19 AM PDT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * tag 'qemu-sparc-20230605' of https://github.com/mcayland/qemu: hw/isa/i82378: Remove unused "io" attribute hw/arm/omap: Remove unused omap_uart_attach() hw/timer/i8254_common: Share "iobase" property via base class Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05hw/isa/i82378: Remove unused "io" attributeBernhard Beschow
The attribute isn't used since commit 5c9736789b79ea49cd236ac326f0a414f63b1015 "i82378: Cleanup implementation". Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20230523195608.125820-4-shentey@gmail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2023-06-05hw/arm/omap: Remove unused omap_uart_attach()Bernhard Beschow
The function is unused since commit bdad3654d3c55f478e538037d9eccd204e5fc8ee ('hw/arm/nseries: Remove invalid/unnecessary n8x0_uart_setup()'). Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230523195608.125820-3-shentey@gmail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2023-06-05hw/timer/i8254_common: Share "iobase" property via base classBernhard Beschow
Both TYPE_KVM_I8254 and TYPE_I8254 have their own but same implementation of the "iobase" property. The storage for the property already resides in PITCommonState, so also move the property definition there. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230523195608.125820-2-shentey@gmail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2023-06-05hw/intc/loongarch_ipi: Bring back all 4 IPI mailboxesJiaxun Yang
As per "Loongson 3A5000/3B5000 Processor Reference Manual", Loongson 3A5000's IPI implementation have 4 mailboxes per core. However, in 78464f023b54 ("hw/loongarch/virt: Modify ipi as percpu device"), the number of IPI mailboxes was reduced to one, which mismatches actual hardware. It won't affect LoongArch based system as LoongArch boot code only uses the first mailbox, however MIPS based Loongson boot code uses all 4 mailboxes. Fixes Coverity CID: 1512452, 1512453 Fixes: 78464f023b54 ("hw/loongarch/virt: Modify ipi as percpu device") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230521102307.87081-2-jiaxun.yang@flygoat.com> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-06-02numa: Check for qemu_strtosz_MiB errorEric Blake
As shown in the previous commit, qemu_strtosz_MiB sometimes leaves the result value untouched (we have to audit further to learn that in that case, the QAPI generator says that visit_type_NumaOptions() will have zero-initialized it), and sometimes leaves it with the value of a partial parse before -EINVAL occurs because of trailing garbage. Rather than blindly treating any string the user may throw at us as valid, we should check for parse failures. Fixes: cc001888 ("numa: fixup parsed NumaNodeOptions earlier", v2.11.0) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Message-Id: <20230522190441.64278-14-eblake@redhat.com>
2023-06-01Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into stagingRichard Henderson
Pull request - Stefano Garzarella's blkio block driver 'fd' parameter - My thread-local blk_io_plug() series # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmR4uHoACgkQnKSrs4Gr # c8hFBAgAo+SFrOteYgdELM9s0EWb0AU39MTOyNXW7i5mPZNXrn5J7pfRD/5wvI6l # wl5GNMQ+M5HVYO7CumKWr4M1IpKV5Jin6FN/2h15fWkeg17lBOmNHUF+LctLYQbq # HwtNA4hdw1+SEv8kQLBgiqSJMqWcn80X09emgPMCIwET9zxokRYwVjQJx2alM5bd # SqgitDp5qlHyj5HQPX2orT9KrXYWQdGr8i50bn0S67r1wdqTRMu93wrWdEUUncId # 7otlUaq8cARbRMJzIwDmy/cF24Ynr0wCJb4aHW+trRtf+PNgx1Ki+YOiz+LFyjq7 # t6KOMeignzhz9Uzq8EVG4XW8SHpGkw== # =Ms48 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 01 Jun 2023 08:25:46 AM PDT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] * tag 'block-pull-request' of https://gitlab.com/stefanha/qemu: qapi: add '@fdset' feature for BlockdevOptionsVirtioBlkVhostVdpa block/blkio: use qemu_open() to support fd passing for virtio-blk block: remove bdrv_co_io_plug() API block/linux-aio: convert to blk_io_plug_call() API block/io_uring: convert to blk_io_plug_call() API block/blkio: convert to blk_io_plug_call() API block/nvme: convert to blk_io_plug_call() API block: add blk_io_plug_call() API Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-01hw/9pfs: use qemu_xxhash4Alex Bennée
No need to pass zeros as we have helpers that do that for us. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230526165401.574474-11-alex.bennee@linaro.org Message-Id: <20230524133952.3971948-10-alex.bennee@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-06-01trace: remove code that depends on setting vcpuAlex Bennée
Now we no longer have any events that are for vcpus we can start excising the code from the trace control. As the vcpu parameter is encoded as part of QMP we just stub out the has_vcpu/vcpu parameters rather than alter the API. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230526165401.574474-8-alex.bennee@linaro.org Message-Id: <20230524133952.3971948-7-alex.bennee@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-06-01trace-events: remove the remaining vcpu trace eventsAlex Bennée
While these are all in helper functions being designated vcpu events complicates the removal of the dynamic vcpu state code. TCG plugins allow you to instrument vcpu_[init|exit|idle]. We rename cpu_reset and make it a normal trace point. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230526165401.574474-3-alex.bennee@linaro.org Message-Id: <20230524133952.3971948-3-alex.bennee@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-06-01block: add blk_io_plug_call() APIStefan Hajnoczi
Introduce a new API for thread-local blk_io_plug() that does not traverse the block graph. The goal is to make blk_io_plug() multi-queue friendly. Instead of having block drivers track whether or not we're in a plugged section, provide an API that allows them to defer a function call until we're unplugged: blk_io_plug_call(fn, opaque). If blk_io_plug_call() is called multiple times with the same fn/opaque pair, then fn() is only called once at the end of the function - resulting in batching. This patch introduces the API and changes blk_io_plug()/blk_io_unplug(). blk_io_plug()/blk_io_unplug() no longer require a BlockBackend argument because the plug state is now thread-local. Later patches convert block drivers to blk_io_plug_call() and then we can finally remove .bdrv_co_io_plug() once all block drivers have been converted. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Message-id: 20230530180959.1108766-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-05-30Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into stagingRichard Henderson
Block layer patches - Fix blockdev-create with iothreads - Remove aio_disable_external() API # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmR2JIARHGt3b2xmQHJl # ZGhhdC5jb20ACgkQfwmycsiPL9brtA/9HVdAdtJxW78J60TE2lTqE9XlqMOEHBZl # 8GN72trjP2geY/9mVsv/XoFie4ecqFsYjwAWWUuXZwLgAo53jh7oFN7gBH5iGyyD # +EukYEfjqoykX5BkoK0gbMZZUe5Y4Dr2CNXYw4bNg8kDzj2RLifGA1XhdL3HoiVt # PHZrhwBR7ddww6gVOnyJrfGL8fMkW/ZNeKRhrTZuSP+63oDOeGTsTumD+YKJzfPs # p5WlwkuPjcqbO+w32FeVOHVhNI4swkN5svz3fkr8NuflfA7kH6nBQ5wymObbaTLc # Erx03lrtP1+6nw43V11UnYt6iDMg4EBUQwtzNaKFnk3rMIdjoQYxIM5FTBWL2rYD # Dg6PhkncXQ1WNWhUaFqpTFLB52XAYsSa4/y2QAGP6nWbqAUAUknQ3exaMvWiq7Z0 # nZeyyhIWvpJIHGCArWRdqqh+zsBdsmUVuPGyZnZgL/cXoJboYiHMyMJSUWE0XxML # NGrncwxdsBXkVGGwTdHpBT64dcu3ENRgwtraqRLQm+tp5MKNTJB/+Ug2/p1vonHT # UOoHz//UPskn8sHIyevoHXeu2Ns0uIHzrAXr+7Ay+9UYyIH6a07F4b2BGqkfyi/i # 8wQsDmJ/idx5C4q1+jS+GuIbpnjIx6nxXwXMqpscUXZmM4Am8OMkiKxQAa1wExGF # paId+HHwyks= # =yuER # -----END PGP SIGNATURE----- # gpg: Signature made Tue 30 May 2023 09:29:52 AM PDT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] * tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (32 commits) aio: remove aio_disable_external() API virtio: do not set is_external=true on host notifiers virtio-scsi: implement BlockDevOps->drained_begin() virtio-blk: implement BlockDevOps->drained_begin() virtio: make it possible to detach host notifier from any thread block/fuse: do not set is_external=true on FUSE fd block/export: don't require AioContext lock around blk_exp_ref/unref() block/export: rewrite vduse-blk drain code hw/xen: do not set is_external=true on evtchn fds xen-block: implement BlockDevOps->drained_begin() block: drain from main loop thread in bdrv_co_yield_to_drain() block: add blk_in_drain() API hw/xen: do not use aio_set_fd_handler(is_external=true) in xen_xenstore block/export: stop using is_external in vhost-user-blk server block/export: wait for vhost-user-blk requests when draining util/vhost-user-server: rename refcount to in_flight counter virtio-scsi: stop using aio_disable_external() during unplug virtio-scsi: avoid race between unplug and transport event hw/qdev: introduce qdev_is_realized() helper block-backend: split blk_do_set_aio_context() ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-30aio: remove aio_disable_external() APIStefan Hajnoczi
All callers now pass is_external=false to aio_set_fd_handler() and aio_set_event_notifier(). The aio_disable_external() API that temporarily disables fd handlers that were registered is_external=true is therefore dead code. Remove aio_disable_external(), aio_enable_external(), and the is_external arguments to aio_set_fd_handler() and aio_set_event_notifier(). The entire test-fdmon-epoll test is removed because its sole purpose was testing aio_disable_external(). Parts of this patch were generated using the following coccinelle (https://coccinelle.lip6.fr/) semantic patch: @@ expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque; @@ - aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque) + aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque) @@ expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready; @@ - aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready) + aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready) Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230516190238.8401-21-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-30virtio: do not set is_external=true on host notifiersStefan Hajnoczi
Host notifiers can now use is_external=false since virtio-blk and virtio-scsi no longer rely on is_external=true for drained sections. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230516190238.8401-20-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-30virtio-scsi: implement BlockDevOps->drained_begin()Stefan Hajnoczi
The virtio-scsi Host Bus Adapter provides access to devices on a SCSI bus. Those SCSI devices typically have a BlockBackend. When the BlockBackend enters a drained section, the SCSI device must temporarily stop submitting new I/O requests. Implement this behavior by temporarily stopping virtio-scsi virtqueue processing when one of the SCSI devices enters a drained section. The new scsi_device_drained_begin() API allows scsi-disk to message the virtio-scsi HBA. scsi_device_drained_begin() uses a drain counter so that multiple SCSI devices can have overlapping drained sections. The HBA only sees one pair of .drained_begin/end() calls. After this commit, virtio-scsi no longer depends on hw/virtio's ioeventfd aio_set_event_notifier(is_external=true). This commit is a step towards removing the aio_disable_external() API. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230516190238.8401-19-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-30virtio-blk: implement BlockDevOps->drained_begin()Stefan Hajnoczi
Detach ioeventfds during drained sections to stop I/O submission from the guest. virtio-blk is no longer reliant on aio_disable_external() after this patch. This will allow us to remove the aio_disable_external() API once all other code that relies on it is converted. Take extra care to avoid attaching/detaching ioeventfds if the data plane is started/stopped during a drained section. This should be rare, but maybe the mirror block job can trigger it. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230516190238.8401-18-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 21:21:07 +0000