aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2012-04-13xen: handle backend deletion from xenstoreStefano Stabellini
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-04-13Xen: Add xen-apic support and hook it up.Wei Liu
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2012-04-13Xen: basic HVM MSI injection support.Wei Liu
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-04-13Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
* stefanha/trivial-patches: configure: Insist on a Python 2, not Python 3 bsd-user: fix compile failure ps2: avoid repeated header file includes make: Always set LC_ALL=C for makeinfo configure: Fix wrong preprocessor statement configure: Remove useless uses of ARCH_CFLAGS
2012-04-12kvmclock: guest stop notificationEric B Munson
Often when a guest is stopped from the qemu console, it will report spurious soft lockup warnings on resume. There are kernel patches being discussed that will give the host the ability to tell the guest that it is being stopped and should ignore the soft lockup warning that generates. This patch uses the qemu Notifier system to tell the guest it is about to be stopped. Signed-off-by: Eric B Munson <emunson@mgebm.net> Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-12kvm: allow arbitrarily sized mmio ioeventfdMichael S. Tsirkin
We use a 2 byte ioeventfd for virtio memory, add support for this. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-12ps2: avoid repeated header file includesWanpeng Li
Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-11rtl8139: do not assume TxStatus[] and TxAddr[] are adjacentStefan Hajnoczi
Commit afe0a595356192d5f79703cf6462fcc112df007c ("rtl8139: support byte read to TxStatus registers") reused rtl8139_TxStatus_read() for reading TxAddr registers. It relies on the fact that TxStatus[] and TxAddr[] are adjacent. This causes a gcc warning because the compiler can detect that array access is out-of-bounds: hw/rtl8139.c:2501:27: error: array subscript is above array bounds [-Werror=array-bounds] This patch refactors the function so that we don't rely on out-of-bounds accesses. Cc: Jason Wang <jasonwang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-10Merge commit 'ff71f2e8cacefae99179993204172bc65e4303df' into stagingAnthony Liguori
* commit 'ff71f2e8cacefae99179993204172bc65e4303df': (21 commits) rtl8139: do the network/host communication only in normal operating mode rtl8139: correctly check the opmode net: move compute_mcast_idx() to net.h rtl8139: support byte read to TxStatus registers rtl8139: remove unused marco rtl8139: limit transmission buffer size in c+ mode pci_regs: Add PCI_EXP_TYPE_PCIE_BRIDGE virtio-net: add DATA_VALID flag pci_bridge: upper 32 bit are long registers pci: fix bridge IO/BASE pcie: drop functionality moved to core pci: set memory type for memory behind the bridge pci: add standard bridge device slotid: add slot id capability shpc: standard hot plug controller pci_bridge: user-friendly default bus name pci: make another unused extern function static pci: don't export an internal function pci_regs: Fix value of PCI_EXP_TYPE_RC_EC. pci: Do not check if a bus exist in pci_parse_devaddr. ...
2012-04-10Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
* qmp/queue/qmp: qapi: convert device_del qdev: qdev_unplug(): use error_set()
2012-04-10Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: (46 commits) qed: remove incoming live migration blocker qed: honor BDRV_O_INCOMING for incoming live migration migration: clear BDRV_O_INCOMING flags on end of incoming live migration qed: add bdrv_invalidate_cache to be called after incoming live migration blockdev: open images with BDRV_O_INCOMING on incoming live migration block: add a function to clear incoming live migration flags block: Add new BDRV_O_INCOMING flag to notice incoming live migration block stream: close unused files and update ->backing_hd qemu-iotests: Fix call syntax for qemu-io qemu-iotests: Fix call syntax for qemu-img qemu-iotests: Test unknown qcow2 header extensions qemu-iotests: qcow2.py sheepdog: fix send req helpers sheepdog: implement SD_OP_FLUSH_VDI operation block: bdrv_append() fixes qed: track dirty flag status qemu-img: add dirty flag status qed: image fragmentation statistics qemu-img: add image fragmentation statistics block: document job API ...
2012-04-10petalogix_s3adsp1800: deleted bad FIXME commentPeter A. G. Crosthwaite
This FIXME has already been actioned. Deleted comment. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-04-09qapi: convert device_delLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-09qdev: qdev_unplug(): use error_set()Luiz Capitulino
It currently uses qerror_report(), but next commit will convert the drive_del command to the QAPI and this requires using error_set(). One particularity of qerror_report() is that it knows when it's running on monitor context or command-line context and prints the error message accordingly. error_set() doesn't do this, so we have to be careful not to drop error messages. qdev_unplug() has three kinds of usages: 1. It's called when hot adding a device fails, to undo anything that has been done before hitting the error 2. It's called by function monitor functions like device_del(), to unplug a device 3. It's used by xen_platform.c in a way that doesn't _seem_ to be in monitor context Only item 2 can print an error message to the user, this commit maintains that. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-07Replace Qemu by QEMU in commentsStefan Weil
The official spelling is QEMU. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> [blauwirbel@gmail.com: fixed comment style in hw/sun4m.c] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-05Use DMADirection type for dma_bdrv_ioDavid Gibson
Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to determine the direction of DMA it is emulating. We already have a DMADirection enum designed specifically to encode DMA directions. This patch uses it for dma_bdrv_io() as well. This involves removing the DMADirection definition from the #ifdef it was inside, but since that only existed to protect the definition of dma_addr_t from places where config.h is not included, there wasn't any reason for it to be there in the first place. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05qdev: add blocksize property typeStefan Hajnoczi
Storage interfaces like virtio-blk can be configured with block size information so that the guest can take advantage of efficient I/O request sizes. According to the SCSI Block Commands (SBC) standard a device's block size is "almost always greater than one byte and may be a multiple of 512 bytes". QEMU currently has a 512 byte minimum block size because the block layer functions work at that granularity. Furthermore, the block size should be a power of 2 because QEMU calculates bitmasks from the value. Introduce a "blocksize" property type so devices can enforce these constraints on block size values. If the constraints are relaxed in the future then this property can be updated. Introduce the new PropertyValueNotPowerOf2 QError so QMP clients know exactly why a block size value was rejected. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05ide: Adds wwn=hex qdev optionFloris Bos
Allow the user to specify a disk's World Wide Name. Linux guests can address disks by their unique World Wide Name number (e.g. /dev/disk/by-id/wwn-0x5001517959123522). This patch adds support for assigning a World Wide Name number to a virtual IDE disk. Cc: kwolf@redhat.com Signed-off-by: Floris Bos <dev@noc-ps.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05ide: Change serial number strncpy() to pstrcpy()Floris Bos
strncpy may not null-terminate the destination string. Cc: kwolf@redhat.com Signed-off-by: Floris Bos <dev@noc-ps.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05ide: Add "model=s" qdev optionFloris Bos
Allow the user to override the default disk model name "QEMU HARDDISK". Some Linux distributions use the /dev/disk/by-id/scsi-SATA_name-of-disk- model_serial addressing scheme when refering to partitions in /etc/fstab and elsewhere. This causes problems when starting a disk image taken from an existing physical server under qemu, because when running under qemu name-of-disk-model is always "QEMU HARDDISK". This patch introduces a model=s option which in combination with the existing serial=s option can be used to fake the disk the operating system was previously on, allowing the OS to boot properly. Cc: kwolf@redhat.com Signed-off-by: Floris Bos <dev@noc-ps.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05ide: IDENTIFY word 86 bit 14 is reservedKevin Wolf
Reserved bits should be cleared to zero. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-05aio: move BlockDriverAIOCB to qemu-aio.hPaolo Bonzini
And remove several block_int.h inclusions that should not be there. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-04Improve interrupt handling priorityArtyom Tarasenko
The vector interrupt has higher priority than interrupt_level_n. Also check only interrupt_level_n concurency when TL > 0, the traps of other types may be nested. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-04Fix vector interrupt handlingArtyom Tarasenko
Don't produce stray irq 5, don't overwrite ivec_data if still busy with processing of the previous interrupt. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-02qdev: put all devices under /machinePaolo Bonzini
Avoid cluttering too much the QOM root. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02qdev: give all devices a canonical pathPaolo Bonzini
A strong limitation of QOM right now is that unconverted ports (e.g. all...) do not give a canonical path to devices that are part of the board. This in turn makes it impossible to replace PROP_PTR with a QOM link for example. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02qdev: add children before qdev_initPaolo Bonzini
We want the composition tree to to be in order by the time we call qdev_init, so that a single set of the toplevel realize property can propagate all the way down the composition tree. This is not the case so far. Unfortunately, this is incompatible with calling qdev_init in the constructor wrappers for devices, so for now we need to unattach some devices that are created through those wrappers. This will be fixed by removing qdev_init and instead setting the toplevel realize property after machine init. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02qom: add container_getPaolo Bonzini
This is QOM "mkdir -p". It is useful when referring to container objects such as "/machine". Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02serial: clear LSR.TEMT when populating the TSRAnthony Liguori
We never actually clear the TEMT (transmit sending register empty) flag when populating the TSR. We set the flag, but since it's never cleared, setting it is sort of pointless.. I found this with a unit test case. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02serial: fix retry logicAnthony Liguori
I'm not sure if the retry logic has ever worked when not using FIFO mode. I found this while writing a test case although code inspection confirms it is definitely broken. The TSR retry logic will never actually happen because it is guarded by an 'if (s->tsr_rety > 0)' but this is the only place that can ever make the variable greater than zero. That effectively makes the retry logic an 'if (0)'. I believe this is a typo and the intention was >= 0. Once this is fixed though, I see double transmits with my test case. This is because in the non FIFO case, serial_xmit may get invoked while LSR.THRE is still high because the character was processed but the retransmit timer was still active. We can handle this by simply checking for LSR.THRE and returning early. It's possible that the FIFO paths also need some attention. Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-01milkymist-vgafb: add missing registerMichael Walle
This bug existed since the first commit. Fortunately, the affected registers have no functionality in qemu. This will only prevent the following warning: milkymist_vgafb: write access to unknown register 0x00000034 Signed-off-by: Michael Walle <michael@walle.cc>
2012-03-31milkymist-sysctl: support for new core versionMichael Walle
The new version introduces the following new registers: - SoC clock frequency: read-only of system clock used on the SoC - debug scratchpad: 8 bit scratchpad register - debug write lock: write once register, without any function on QEMU Signed-off-by: Michael Walle <michael@walle.cc>
2012-03-31Merge branch 'arm-devs.for-upstream' of ↵Blue Swirl
git://git.linaro.org/people/pmaydell/qemu-arm * 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: pl031: switch clock base to rtc_clock pl031: rearm alarm timer upon load arm: switch real-time clocks to rtc_clock omap: switch omap_lpg to vm_clock rtc: add -rtc clock=rt
2012-03-30rtc: split out macros into a header file and use in test caseAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30qtest: IRQ interception infrastructurePaolo Bonzini
Since /i440fx/piix3 is being removed from the composition tree, the IO-APIC is placed under /i440fx. This is wrong and should be changed as soon as the /i440fx/piix3 path is put back. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30pl031: switch clock base to rtc_clockPaolo Bonzini
This lets the user specify the desired semantics. By default, the RTC will follow adjustments from the host's NTP client, and will remain in sync when the virtual machine is stopped. The previous behavior, which provides determinism with both icount and qtest, remains available with "-rtc clock=vm". pl031 supports migration, so we need to convert the time base from rtc_clock to vm_clock and back for backwards compatibility. (The rtc_clock may not be synchronized on the two machines, especially with savevm/loadvm, so the conversion is needed anyway. And since any time base will do, why not pick the one base that is backwards compatible). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-30pl031: rearm alarm timer upon loadPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-30arm: switch real-time clocks to rtc_clockPaolo Bonzini
This lets the user specify the desired semantics. By default, the RTC will follow adjustments from the host's NTP client. "-rtc clock=vm" will improve determinism with both icount and qtest. Finally, the previous behavior is available with "-rtc clock=rt". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-30omap: switch omap_lpg to vm_clockPaolo Bonzini
The output of the pulse generator needs to be deterministic when running in -icount mode, and to remain constant whenever the VM is stopped. So the right clock to use is vm_clock. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-28Merge remote-tracking branch 'sstabellini/disk_io' into stagingAnthony Liguori
* sstabellini/disk_io: xen_disk: when using AIO flush after the operation is completed xen_disk: open disk with BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NATIVE_AIO
2012-03-27xen_disk: detach the blkdev before bdrv_deleteStefano Stabellini
We need to detach the blkdev from the BlockDriverState before calling bdrv_delete. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-03-27xen_console: ignore console disconnect events from console/0Stefano Stabellini
The first console has a different location compared to other PV devices (console, rather than device/console/0) and doesn't obey the xenstore state protocol. We already special case the first console in con_init and con_initialise, we should also do it in con_disconnect. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-03-24fix screendumpGerd Hoffmann
Commit 45efb16124efef51de5157afc31984b5a47700f9 optimized a bit too much. We can skip the vga_invalidate_display() in case no console switch happened because we don't need a full redraw then. We can *not* skip vga_hw_update() though, because the screen content will be stale then in case nobody else calls vga_hw_update(). Trigger: vga textmode with vnc display and no client connected. Reported-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com> Tested-by: Avi Kivity <avi@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-23xen_disk: when using AIO flush after the operation is completedStefano Stabellini
If ioreq->postsync call bdrv_flush when the AIO operation is actually completed. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-03-23xen_disk: open disk with BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NATIVE_AIOStefano Stabellini
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-03-19Merge remote-tracking branch 'sstabellini/saverestore-8' into stagingAnthony Liguori
* sstabellini/saverestore-8: xen: do not allocate RAM during INMIGRATE runstate xen mapcache: check if memory region has moved. xen: record physmap changes to xenstore Set runstate to INMIGRATE earlier Introduce "xen-save-devices-state" cirrus_vga: do not reset videoram Conflicts: qapi-schema.json Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-19Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
* stefanha/trivial-patches: qemu-ga: for w32, fix leaked handle ov.hEvent in ga_channel_write() ioapic: fix build with DEBUG_IOAPIC .gitignore: add qemu-bridge-helper and option rom build products cleanup obsolete typedef monitor: Remove unused bool field 'qapi' in mon_cmd_t struct ds1338: Add missing break statement vnc: Fix packed boolean struct members Remove type field in ModuleEntry as it's not used
2012-03-19Merge remote-tracking branch 'spice/spice.v50' into stagingAnthony Liguori
* spice/spice.v50: spice: fix broken initialization hw/qxl.c: Fix compilation failures on 32 bit hosts qxl/qxl_render.c: add trace events qxl: switch qxl.c to trace-events qxl: init_pipe_signaling: exit on failure monitor: fix client_migrate_info error handling spice: set spice uuid and name
2012-03-19Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
* bonzini/scsi-next: scsi: add get_dev_path virtio-scsi: call unregister_savevm properly scsi: copy serial number into VPD page 0x83 scsi-cd: check ready condition before processing several commands get rid of CONFIG_VIRTIO_SCSI
2012-03-19scsi: add get_dev_pathPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-16 07:55:41 +0000