aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2014-09-18vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiationDamjan Marion
Header length check should happen only if backend is kernel. For user backend there is no reason to reset this bit. vhost-user code does not define .has_vnet_hdr_len so VIRTIO_NET_F_MRG_RXBUF cannot be negotiated even if both sides support it. Signed-off-by: Damjan Marion <damarion@cisco.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-18virtio-pci: enable bus master for old guestsMichael S. Tsirkin
commit cc943c36faa192cd4b32af8fe5edb31894017d35 pci: Use bus master address space for delivering MSI/MSI-X messages breaks virtio-net for rhel6.[56] x86 guests because they don't enable bus mastering for virtio PCI devices. For the same reason, rhel6.[56] ppc64 guests cannot boot on a virtio-blk disk anymore. Old guests forgot to enable bus mastering, enable it automatically on DRIVER (guests use some devices before DRIVER_OK). Reported-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-18Revert "virtio: don't call device on !vm_running"Michael S. Tsirkin
This reverts commit a1bc7b827e422e1ff065640d8ec5347c4aadfcd8. virtio: don't call device on !vm_running It turns out that virtio net assumes that vm_running is updated before device status callback in many places, so this change leads to asserts. Previous commit fixes the root issue that motivated a1bc7b827e422e1ff065640d8ec5347c4aadfcd8 differently, so there's no longer a need for this change. In the future, we might be able to drop checking vm_running completely, and check vm state directly. Reported-by: Dietmar Maurer <dietmar@proxmox.com> Cc: qemu-stable@nongnu.org Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-18virtio-net: drop assert on vm stopMichael S. Tsirkin
On vm stop, vm_running state set to stopped before device is notified, so callbacks can get envoked with vm_running = false; and this is not an error. Cc: qemu-stable@nongnu.org Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-18qdev: Move global validation to a single functionEduardo Habkost
Currently GlobalProperty.not_used=false has multiple meanings: * It may be a property for a hotpluggable device, which may or may not have been used by a device; * It may be a machine-type-provided property, which may or may not have been used by a device. * It may be a user-provided property that was actually not used by any device. Simplify the logic by having two separate fields: 'user_provided' and 'used'. This allows the entire global property validation logic to be contained in a single function, and allows more specific error messages. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-18qdev: Rename qdev_prop_check_global() to qdev_prop_check_globals()Eduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-14hw/machine: Free old values of string propertiesEduardo Habkost
Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Cc: qemu-stable@nongnu.org
2014-09-12hw/arm/boot: enable DTB support when booting ELF imagesArd Biesheuvel
Add support for loading DTB images when booting ELF images using -kernel. If there are no conflicts with the placement of the ELF segments, the DTB image is loaded at the base of RAM. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 1410453915-9344-5-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12hw/arm/boot: load device tree to base of DRAM if no -kernel option was passedArd Biesheuvel
If we are running the 'virt' machine, we may have a device tree blob but no kernel to supply it to if no -kernel option was passed. In that case, copy it to the base of RAM where it can be picked up by a bootloader. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 1410453915-9344-4-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12hw/arm/boot: pass an address limit to and return size from load_dtb()Ard Biesheuvel
Add an address limit input parameter to load_dtb() so that we can tell load_dtb() how much memory the dtb is allowed to consume. If the dtb doesn't fit, return 0, otherwise return the actual size of the loaded dtb. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 1410453915-9344-3-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12hw/arm/boot: load DTB as a ROM imageArd Biesheuvel
In order to make the device tree blob (DTB) available in memory not only at first boot, but also after system reset, use rom_blob_add_fixed() to install it into memory. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 1410453915-9344-2-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12hw/arm/virt: fix pl011 and pl031 irq flagsPeter Maydell
The pl011 and pl031 devices both use level triggered interrupts, but the device tree we construct was incorrectly telling the kernel to configure the GIC to treat them as edge triggered. This meant that output from the pl011 would hang after a while. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1410274423-9461-1-git-send-email-peter.maydell@linaro.org Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: qemu-stable@nongnu.org
2014-09-12hw/arm/virt: Provide flash devices for boot ROMsPeter Maydell
Add two flash devices to the virt board, so that it can be used for running guests which want a bootrom image such as UEFI. We provide two flash devices to make it more convenient to provide both a read-only UEFI image and a read-write place to store guest-set UEFI config variables. The '-bios' command line option is set up to provide an image for the first of the two flash devices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1409930126-28449-2-git-send-email-ard.biesheuvel@linaro.org
2014-09-12pl061: implement input interrupt logicColin Leitner
This patch adds the missing input interrupt logic to the pl061 GPIO device. To keep the floating output pins to stay high, the old state variable had to be split into two separate ones for input and output - which brings the vmstate version to 3. Edge level interrupts and I/O were tested under Linux 3.14. Level interrupt handling hasn't been tested. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Message-id: 54024FD2.9080204@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12hw/arm/virt: add linux, stdout-path to /chosen DT nodeArd Biesheuvel
Add a property "linux,stdout-path" to the /chosen DT node and make it point to the emulated UART. This allows users such as the Linux kernel to produce console output without the need to pass console= or earlycon=pl011,0x... command line arguments. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 1409317439-29349-1-git-send-email-ard.biesheuvel@linaro.org Reviewed-by: Rob Herring <rob.herring@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-11Merge remote-tracking branch 'remotes/kraxel/tags/pull-console-20140905-2' ↵Peter Maydell
into staging console: pixman switchover continued, add some infrastructure to make it easier using pixman in display device emulation. # gpg: Signature made Fri 05 Sep 2014 14:38:57 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-console-20140905-2: console: Remove unused QEMU_BIG_ENDIAN_FLAG console: add qemu_pixman_linebuf_copy console: add dpy_gfx_update_dirty console: add qemu_create_displaysurface_guestmem console: stop using PixelFormat console: reimplement qemu_default_pixelformat console: add qemu_default_pixman_format console: add qemu_pixelformat_from_pixman Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-11Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20140910-1' into ↵Peter Maydell
staging xhci PCIe endpoint migration compatibility fix # gpg: Signature made Wed 10 Sep 2014 06:35:20 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-usb-20140910-1: xhci PCIe endpoint migration compatibility fix Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-10xhci PCIe endpoint migration compatibility fixDr. David Alan Gilbert
Add back the PCIe config capabilities on XHCI cards in non-PCIe slots, but only for machine types before 2.1. This fixes a migration incompatibility in the XHCI PCI devices caused by: 058fdcf52cdbf57b67e7 - xhci: add endpoint cap on express bus only Note that in fixing it for compatibility with older QEMUs, it breaks compatibility with existing QEMU 2.1's on older machine types. The status before this patch was (if it used an XHCI adapter): machine type | source qemu any pre-2.1 - FAIL any 2.1... - PASS With this patch: machine type | source qemu any pre-2.1 - PASS pre-2.1 2.1... - FAIL 2.1 2.1... - PASS A test to trigger it is to add '-device nec-usb-xhci,id=xhci,addr=0x12' to the command line. Cc: qemu-stable@nongnu.org Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-09apb: implement PCI bus error interrupt map registersMark Cave-Ayland
Both OpenBSD and FreeBSD SPARC64 attempt to read the interrupt map from the hardware and will fail if the correct ino isn't present. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-09-08Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Block pull request # gpg: Signature made Mon 08 Sep 2014 11:49:31 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: (24 commits) ide: Add resize callback to ide/core IDE: Fill the IDENTIFY request consistently vmdk: fix buf leak in vmdk_parse_extents() vmdk: fix vmdk_parse_extents() extent_file leaks ide: Add wwn support to IDE-ATAPI drive qtest/ide: Uninitialize PC allocator libqos: add a simple first-fit memory allocator MAINTAINERS: update sheepdog maintainer qemu-nbd: fix indentation and coding style qemu-nbd: add option to set detect-zeroes mode rename parse_enum_option to qapi_enum_parse and make it public block/archipelago: Use QEMU atomic builtins qemu-img: fix rebase src_cache option documentation qemu-img: clarify src_cache option documentation libqos: Added EVENT_IDX support libqos: Added MSI-X support libqos: Added test case for configuration changes in virtio-blk test libqos: Added indirect descriptor support to virtio implementation libqos: Added basic virtqueue support to virtio implementation tests: Add virtio device initialization ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-08Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell
into staging Patch queue for ppc - 2014-09-08 Alexander Graf (11): PPC: KVM: Fix g3beige and mac99 when HV is loaded PPC: mac99: Move NVRAM to page boundary when necessary KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd PPC: KVM: Use vm check_extension for pv hcall PPC: mac99: Fix core99 timer frequency PPC: mac_nvram: Remove unused functions PPC: mac_nvram: Allow 2 and 4 byte accesses PPC: mac_nvram: Split NVRAM into OF and OSX parts PPC: Mac: Move tbfreq into local variable PPC: Cuda: Use cuda timer to expose tbfreq to guest PPC: Fix default config ordering and add eTSEC for ppc64 Alexey Kardashevskiy (7): spapr: Move DT memory node rendering to a helper spapr: Use DT memory node rendering helper for other nodes spapr: Refactor spapr_populate_memory() to allow memoryless nodes spapr: Split memory nodes to power-of-two blocks spapr: Add a helper for node0_size calculation spapr: Fix ibm, associativity for memory nodes spapr_pci: Fix config space corruption Anton Blanchard (2): spapr-vlan: Don't touch last entry in buffer list hypervisor property clashes with hypervisor node Benjamin Herrenschmidt (2): loader: Add load_image_size() to replace load_image() spapr: Locate RTAS and device-tree based on real RMA Bharat Bhushan (4): ppc: debug stub: Get trap instruction opcode from KVM ppc: synchronize excp_vectors for injecting exception ppc: Add software breakpoint support ppc: Add hw breakpoint watchpoint support Gonglei (1): spapr: fix possible memory leak Greg Kurz (1): spapr_pci: map the MSI window in each PHB Nikunj A Dadhania (3): ppc: spapr-rtas - implement os-term rtas call spapr: add uuid/host details to device tree ppc/spapr: Fix MAX_CPUS to 255 Peter Maydell (1): hw/ppc/spapr_hcall.c: Fix typo in function names Tom Musta (20): linux-user: Fix Stack Pointer Bug in PPC setup_rt_frame linux-user: Split PPC Trampoline Encoding from Register Save linux-user: Enable Signal Handlers on PPC64 linux-user: Properly Dereference PPC64 ELFv1 Signal Handler Pointer linux-user: Implement do_setcontext for PPC64 linux-user: Handle PPC64 ELFv2 Function Pointers target-ppc: Bug Fix: rlwinm target-ppc: Bug Fix: rlwnm target-ppc: Bug Fix: rlwimi target-ppc: Bug Fix: mullwo target-ppc: Bug Fix: mullw target-ppc: Bug Fix: mulldo OV Detection target-ppc: Bug Fix: srawi target-ppc: Bug Fix: srad target-ppc: Special Case of rlwimi Should Use Deposit target-ppc: Optimize rlwinm MB=0 ME=31 target-ppc: Optimize rlwnm MB=0 ME=31 target-ppc: Clean Up mullw target-ppc: Clean up mullwo target-ppc: Implement mulldo with TCG # gpg: Signature made Mon 08 Sep 2014 11:51:15 BST using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: (52 commits) hypervisor property clashes with hypervisor node PPC: Fix default config ordering and add eTSEC for ppc64 spapr_pci: map the MSI window in each PHB target-ppc: Implement mulldo with TCG target-ppc: Clean up mullwo target-ppc: Clean Up mullw target-ppc: Optimize rlwnm MB=0 ME=31 target-ppc: Optimize rlwinm MB=0 ME=31 target-ppc: Special Case of rlwimi Should Use Deposit spapr-vlan: Don't touch last entry in buffer list spapr_pci: Fix config space corruption PPC: Cuda: Use cuda timer to expose tbfreq to guest PPC: Mac: Move tbfreq into local variable PPC: mac_nvram: Split NVRAM into OF and OSX parts PPC: mac_nvram: Allow 2 and 4 byte accesses PPC: mac_nvram: Remove unused functions PPC: mac99: Fix core99 timer frequency PPC: KVM: Use vm check_extension for pv hcall KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd target-ppc: Bug Fix: srad ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-08hypervisor property clashes with hypervisor nodeAnton Blanchard
dtc fails on a recent QEMU snapshot: ERROR (name_properties): "name" property in /hypervisor#1 is incorrect ("hypervisor" instead of base node name) Looking at the device tree we have a hypervisor property: # lsprop hypervisor hypervisor "kvm" But we also have a hypervisor node, with a name that doesn't match: # lsprop hypervisor#1/ name "hypervisor" compatible "linux,kvm" linux,phandle 7e5eb5d8 (2120136152) Commit c08ce91d309c (spapr: add uuid/host details to device tree) looks to have collided with an earlier patch. Remove the hypervisor property. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr_pci: map the MSI window in each PHBGreg Kurz
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X. Commit cc943c36faa192cd4b32af8fe5edb31894017d35 has modified MSI-X so that writes are made using the bus master address space and follow the IOMMU path. Unfortunately, the IOMMU address space address space does not have an MSI window: the notification is silently dropped in unassigned_mem_write instead of reaching the guest... The most visible effect is that all virtio devices are non-functional on sPAPR since then. :( This patch does the following: 1) map the MSI window into the IOMMU address space for each PHB - since each PHB instantiates its own IOMMU address space, we can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW) - no real need to keep the MSI window setup in a separate function, the spapr_pci_msi_init() code moves to spapr_phb_realize(). 2) kill the global MSI window as it is not needed in the end Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr-vlan: Don't touch last entry in buffer listAnton Blanchard
The last 8 bytes of the buffer list is defined to contain the number of dropped frames. At the moment we use it to store rx entries, which trips up ethtool -S: rx_no_buffer: 9223380832981355136 Fix this by skipping the last buffer list entry. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr_pci: Fix config space corruptionAlexey Kardashevskiy
When disabling MSI/MSIX via "ibm,change-msi" RTAS call, no check was made if MSI or MSIX is actually supported and the MSI message was reset unconditionally. If this happened on a device which does not support MSI (but does support MSIX, otherwise "ibm,change-msi" would not be called), this device would have PCIDevice::msi_cap field (MSI capability offset) set to zero and writing a vector would actually clear PCI status. This clears MSI message only if MSI or MSIX is present on a device. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: Cuda: Use cuda timer to expose tbfreq to guestAlexander Graf
Mac OS X calibrates a number of frequencies on bootup based on reading tb values on bootup and comparing them to via cuda timer values. The only variable we can really steer well (thanks to KVM) is the cuda frequency. So let's use that one to fake Mac OS X into believing the bus frequency is tbfreq * 4. That way Mac OS X will automatically calculate the correct timebase frequency. With this patch and the patch set I posted earlier I can successfully run Mac OS X 10.2, 10.3 and 10.4 guests with -M mac99 on TCG and KVM. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: Mac: Move tbfreq into local variableAlexander Graf
We already expose the real CPU's tb frequency to the guest via fw_cfg. Soon we will need to also expose it to the MacIO, so let's move it to a variable that we can leverage every time we need the frequency. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac_nvram: Split NVRAM into OF and OSX partsAlexander Graf
Mac OS X (at least with -M mac99) searches for a valid NVRAM partition of a special Apple type. If it can't find that partition in the first half of NVRAM, it will look at the second half. There are a few implications from this. The first is that we need to split NVRAM into 2 halves - one for Open Firmware use, the other one for Mac OS X. Without this split Mac OS X will just loop endlessly over the second half trying to find a partition. The other implication is that we should provide a specially crafted Mac OS X compatible NVRAM partition on the second half that Mac OS X can happily use as it sees fit. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac_nvram: Allow 2 and 4 byte accessesAlexander Graf
The NVRAM in our Core99 machine really supports 2byte and 4byte accesses just as well as 1byte accesses. In fact, Mac OS X uses those. Add support for higher register size granularities. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac_nvram: Remove unused functionsAlexander Graf
The macio_nvram_read and macio_nvram_write functions are never called, just remove them. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac99: Fix core99 timer frequencyAlexander Graf
There is a special timer in the mac99 machine that we recently started to emulate. Unfortunately we emulated it in the wrong frequency. This patch adapts the frequency Mac OS X uses to evaluate results from this timer, making calculations it bases off of it work. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc/spapr: Fix MAX_CPUS to 255Nikunj A Dadhania
MAX_CPUS 256 is inconsistent with qemu supporting upto 255 cpus. This MAX_CPUS number was percolated back to "virsh capabilities" with wrong max_cpus. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Locate RTAS and device-tree based on real RMABenjamin Herrenschmidt
We currently calculate the final RTAS and FDT location based on the early estimate of the RMA size, cropped to 256M on KVM since we only know the real RMA size at reset time which happens much later in the boot process. This means the FDT and RTAS end up right below 256M while they could be much higher, using precious RMA space and limiting what the OS bootloader can put there which has proved to be a problem with some OSes (such as when using very large initrd's) Fortunately, we do the actual copy of the device-tree into guest memory much later, during reset, late enough to be able to do it using the final RMA value, we just need to move the calculation to the right place. However, RTAS is still loaded too early, so we change the code to load the tiny blob into qemu memory early on, and then copy it into guest memory at reset time. It's small enough that the memory usage doesn't matter. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: fixed errors from checkpatch.pl, defined RTAS_MAX_ADDR] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: fix compilation on 32bit hosts] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08loader: Add load_image_size() to replace load_image()Benjamin Herrenschmidt
A subsequent patch to ppc/spapr needs to load the RTAS blob into qemu memory rather than target memory (so it can later be copied into the right spot at machine reset time). I would use load_image() but it is marked deprecated because it doesn't take a buffer size as argument, so let's add load_image_size() that does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: fixed errors from checkpatch.pl] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Fix ibm, associativity for memory nodesAlexey Kardashevskiy
We want the associtivity lists of memory and CPU nodes to match but memory nodes have incorrect domain#3 which is zero for CPU so they won't match. This clears domain#3 in the list to match CPUs associtivity lists. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Add a helper for node0_size calculationAlexey Kardashevskiy
In multiple places there is a node0_size variable calculation which assumes that NUMA node #0 and memory node #0 are the same things which they are not. Since we are going to change it and do not want to change it in multiple places, let's make a helper. This adds a spapr_node0_size() helper and makes use of it. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Split memory nodes to power-of-two blocksAlexey Kardashevskiy
Linux kernel expects nodes to have power-of-two size and does WARN_ON if this is not the case: [ 0.041456] WARNING: at drivers/base/memory.c:115 which is: === /* Validate blk_sz is a power of 2 and not less than section size */ if ((block_sz & (block_sz - 1)) || (block_sz < MIN_MEMORY_BLOCK_SIZE)) { WARN_ON(1); block_sz = MIN_MEMORY_BLOCK_SIZE; } === This splits memory nodes into set of smaller blocks with a size which is a power of two. This makes sure the start address of every node is aligned to the node size. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: squash windows compile fix in] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Refactor spapr_populate_memory() to allow memoryless nodesAlexey Kardashevskiy
Current QEMU does not support memoryless NUMA nodes, however actual hardware may have them so it makes sense to have a way to emulate them in QEMU. This prepares SPAPR for that. This moves 2 calls of spapr_populate_memory_node() into the existing loop over numa nodes so first several nodes may have no memory and this still will work. If there is no numa configuration, the code assumes there is just a single node at 0 and it has all the guest memory. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Use DT memory node rendering helper for other nodesAlexey Kardashevskiy
This finishes refactoring by using the spapr_populate_memory_node helper for all nodes and removing leftovers from spapr_populate_memory(). This is not a part of the previous patch because the patches look nicer apart. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Move DT memory node rendering to a helperAlexey Kardashevskiy
This moves recurring bits of code related to memory@xxx nodes creation to a helper. This makes use of the new helper for node@0. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: fix possible memory leakGonglei
get_boot_devices_list() will malloc memory, spapr_finalize_fdt doesn't free it. Signed-off-by: Chenliang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac99: Move NVRAM to page boundary when necessaryAlexander Graf
When running KVM we have to adhere to host page boundaries for memory slots. Unfortunately the NVRAM on mac99 is a 4k RAM hole inside of an MMIO flash area. So if our host is configured with 64k page size, we can't use the mac99 target with KVM. This is a real shame, as this limitation is not really an issue - we can easily map NVRAM somewhere else and at least Linux and Mac OS X use it at their new location. So in that emergency case when it's about failing to run at all and moving NVRAM to a place it shouldn't be at, choose the latter. This patch enables -M mac99 with KVM on 64k page size hosts. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: add uuid/host details to device treeNikunj A Dadhania
Useful for identifying the guest/host uniquely within the guest. Adding following properties to the guest root node. vm,uuid - uuid of the guest host-model - Host model number host-serial - Host machine serial number hypervisor type - Tells its "kvm" Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08hw/ppc/spapr_hcall.c: Fix typo in function namesPeter Maydell
Fix a typo in the names of a couple of functions (s/resouce/resource/). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc: spapr-rtas - implement os-term rtas callNikunj A Dadhania
PAPR compliant guest calls this in absence of kdump. This finally reaches the guest and can be handled according to the policies set by higher level tools(like taking dump) for further analysis by tools like crash. Linux kernel calls ibm,os-term when extended property of os-term is set. This makes sure that a return to the linux kernel is gauranteed. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> [agraf: reduce RTAS_TOKEN_MAX] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: KVM: Fix g3beige and mac99 when HV is loadedAlexander Graf
On PPC we have 2 different styles of KVM: PR and HV. HV can only virtualize sPAPR guests while PR can virtualize everything that's reasonably close to the host hardware platform. As long as only one kernel module (PR or HV) is loaded, the "default" kvm type is the module that's loaded. So if your hardware only supports PR mode you can easily spawn a Mac VM. However, if both HV and PR are loaded we default to HV mode. And in that case the Mac machines have to explicitly ask for PR mode to get a working VM. Fix this up by explicitly having the Mac machines ask for PR style KVM. This fixes bootup of Mac VMs on systems where bot HV and PR kvm modules are loaded for me. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ide: Add resize callback to ide/coreJohn Snow
Currently, if the block device backing the IDE drive is resized, the information about the device as cached inside of the IDEState structure is not updated, thus when a guest OS re-queries the drive, it is unable to see the expanded size. This patch adds a resize callback that updates the IDENTIFY data buffer in order to correct this. Lastly, a Linux guest as-is cannot resize a libata drive while in-use, but it can see the expanded size as part of a bus rescan event. This patch also allows guests such as Linux to see the new drive size after a soft reboot event, without having to exit the QEMU process. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08IDE: Fill the IDENTIFY request consistentlyJohn Snow
IDE-HD, IDE-ATAPI and IDE-CFATA all fill the identify buffer in slightly different ways, this is a relatively minor patch to make them uniform, to emphasize that: (1) We build the s->identify_data cache first, then (2) We copy it to s->io_buffer to fulfill the request. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08ide: Add wwn support to IDE-ATAPI driveJohn Snow
Although it is possible to specify the wwn property for cdrom devices on the command line, the underlying driver fails to relay this information to the guest operating system via IDENTIFY. This is a simple patch to correct that. See ATA8-ACS, Table 22 parts 5, 6, and 9. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08pflash_cfi01: write flash contents to bdrv on incoming migrationLaszlo Ersek
A drive that backs a pflash device is special: - it is very small, - its entire contents are kept in a RAMBlock at all times, covering the guest-phys address range that provides the guest's view of the emulated flash chip. The pflash device model keeps the drive (the host-side file) and the guest-visible flash contents in sync. When migrating the guest, the guest-visible flash contents (the RAMBlock) is migrated by default, but on the target host, the drive (the host-side file) remains in full sync with the RAMBlock only if: - the source and target hosts share the storage underlying the pflash drive, - or the migration requests full or incremental block migration too, which then covers all drives. Due to the special nature of pflash drives, the following scenario makes sense as well: - no full nor incremental block migration, covering all drives, alongside the base migration (justified eg. by shared storage for "normal" (big) drives), - non-shared storage for pflash drives. In this case, currently only those portions of the flash drive are updated on the target disk that the guest reprograms while running on the target host. In order to restore accord, dump the entire flash contents to the bdrv in a post_load() callback. - The read-only check follows the other call-sites of pflash_update(); - both "pfl->ro" and pflash_update() reflect / consider the case when "pfl->bs" is NULL; - the total size of the flash device is calculated as in pflash_cfi01_realize(). When using shared storage, or requesting full or incremental block migration along with the normal migration, the patch should incur a harmless rewrite from the target side. It is assumed that, on the target host, RAM is loaded ahead of the call to pflash_post_load(). Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-09 16:51:59 +0000