aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2023-03-10e1000: Configure ResettableClassAkihiko Odaki
This is part of recent efforts of refactoring e1000 and e1000e. DeviceClass's reset member is deprecated so migrate to ResettableClass. There is no behavioral difference. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000e: Improve software resetAkihiko Odaki
This change makes e1000e reset more things when software reset was triggered. Some registers are exempted from software reset in the datasheet and this change also implements the behavior accordingly. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000e: Remove pending interrupt flagsAkihiko Odaki
They are duplicate of running throttling timer flags and incomplete as the flags are not cleared when the interrupts are fired or the device is reset. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000e: Use memcpy to intialize registersAkihiko Odaki
Use memcpy instead of memmove to initialize registers. The initial register templates and register table instances will never overlap. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000: Use memcpy to intialize registersAkihiko Odaki
Use memcpy instead of memmove to initialize registers. The initial register templates and register table instances will never overlap. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000e: Use more constant definitionsAkihiko Odaki
The definitions of SW Semaphore Register were copied from: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/ethernet/intel/e1000e/defines.h?h=v6.0.9#n374 Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000: Use more constant definitionsAkihiko Odaki
The definitions for E1000_VFTA_ENTRY_SHIFT, E1000_VFTA_ENTRY_MASK, and E1000_VFTA_ENTRY_BIT_SHIFT_MASK were copied from: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/ethernet/intel/e1000/e1000_hw.h?h=v6.0.9#n306 The definitions for E1000_NUM_UNICAST, E1000_MC_TBL_SIZE, and E1000_VLAN_FILTER_TBL_SIZE were copied from: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/ethernet/intel/e1000/e1000_hw.h?h=v6.0.9#n707 Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000e: Mask registers when writingAkihiko Odaki
When a register has effective bits fewer than their width, the old code inconsistently masked when writing or reading. Make the code consistent by always masking when writing, and remove some code duplication. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000e: Introduce E1000E_LOW_BITS_SET_FUNCAkihiko Odaki
e1000e_set_16bit and e1000e_set_12bit look so similar so define a generic macro. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000: Mask registers when writingAkihiko Odaki
When a register has effective bits fewer than their width, the old code inconsistently masked when writing or reading. Make the code consistent by always masking when writing, and remove some code duplication. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000: Use hw/net/mii.hAkihiko Odaki
hw/net/mii.h provides common definitions for MII. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10fsl_etsec: Use hw/net/mii.hAkihiko Odaki
hw/net/mii.h provides common definitions for MII. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10e1000e: Fix the code styleAkihiko Odaki
igb implementation first starts off by copying e1000e code. Correct the code style before that. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-09Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into ↵Peter Maydell
staging gdbstub refactor: - split user and softmmu code - use cleaner headers for tb_flush, target_ulong - probe for gdb multiarch support at configure - make syscall handling target independent - add update guest debug of accel ops # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe # KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ # SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp # y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y # /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK # PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm # NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g== # =Al36 # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits) gdbstub: move update guest debug to accel ops gdbstub: Build syscall.c once stubs: split semihosting_get_target from system only stubs gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t gdbstub: Remove gdb_do_syscallv gdbstub: split out softmmu/user specifics for syscall handling include: split target_long definition from cpu-defs testing: probe gdb for supported architectures ahead of time gdbstub: only compile gdbstub twice for whole build gdbstub: move syscall handling to new file gdbstub: move register helpers into standalone include gdbstub: don't use target_ulong while handling registers gdbstub: fix address type of gdb_set_cpu_pc gdbstub: specialise stub_can_reverse gdbstub: introduce gdb_get_max_cpus gdbstub: specialise target_memory_rw_debug gdbstub: specialise handle_query_attached gdbstub: abstract target specific details from gdb_put_packet_binary gdbstub: rationalise signal mapping in softmmu gdbstub: move chunks of user code into own files ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-09Merge tag 'vfio-updates-20230307.1' of ↵Peter Maydell
https://gitlab.com/alex.williamson/qemu into staging VFIO updates for 8.0 * Device level dirty page tracking support for vfio migration, as well as various cleanups and consolidations. (Avihai Horon, Joao Martins) * Trivial cleanup of migration entry points. (Alex Williamson) * Fix trace event typo. (Cédric Le Goater) # -----BEGIN PGP SIGNATURE----- # # iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmQHgCUbHGFsZXgud2ls # bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsi4i0P/RwP3TJ4jDBEW9JNa52O # 6Hu6tWDccjSZFX7W/pnUztFtIqYBG6Jcms5VLZhaqrSda2BKa3dVoY+iU2finHRn # q4CNQ4EVbKBG0HvA9SEd7WchAKADBCVpjeUBAF6jVQHBCQECHnfWtA2Y0T5oEGgw # H1dwuw3YX6Jwyh5RmT/m7wNtOo2ms/CpDAc7d5rfLg0cDQ0vXPCu/CVvqAXbBpVd # g7NrMLw1wfhKLYN2eWYkiZ+pGwNX5uxsp0jOSA7leFcfkuLX2KzQ99JpCNhX1oRd # H5bedA62ffFLGQdlM2zyiAi37CgmeElKSlnaJdBX91Y4DQ3HSdbHYWoiYtzl89rB # 7QxYHG7XOMdYKssN7qz+oVUpI+ycB18wSW2D/h4fJCNkH92cSHMyJ/yEA3r39eX4 # 7rgu0j8cg2iwIiGlh/klguXfatMDJvbrazDHYixKUJD5vlDXQvTe9LVpwUaUhGGM # Gh4g8wx9gmDE9H1FbQ0kQqut70sO1Hnw2Pj19qzfdwfL6LeYWk+5AfQZmyziYGFM # CGRKz5RhlN/Ori9gTKfn00stuxdD09Md5fPllKyMq7a1tkQt58RxLSkUN8hygeki # Uqnlx5KXBLQ/7ZtnQNoe8frn5FhKBBSLC3tA71PyL4kIbcuiHXLvxIOeE9oJpSPi # Bt8sTr3eCnVF9mys1ZmGmaYY # =nM9d # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 18:19:17 GMT # gpg: using RSA key 42F6C04E540BD1A99E7B8A90239B9B6E3BB08B22 # gpg: issuer "alex.williamson@redhat.com" # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * tag 'vfio-updates-20230307.1' of https://gitlab.com/alex.williamson/qemu: vfio: Fix vfio_get_dev_region() trace event vfio/migration: Rename entry points docs/devel: Document VFIO device dirty page tracking vfio/migration: Query device dirty page tracking support vfio/migration: Block migration with vIOMMU vfio/common: Add device dirty page bitmap sync vfio/common: Extract code from vfio_get_dirty_bitmap() to new function vfio/common: Add device dirty page tracking start/stop vfio/common: Record DMA mapped IOVA ranges vfio/common: Add helper to consolidate iova/end calculation vfio/common: Consolidate skip/invalid section into helper vfio/common: Use a single tracepoint for skipped sections vfio/common: Add helper to validate iova/end against hostwin vfio/common: Add VFIOBitmap and alloc function vfio/common: Abort migration if dirty log start/stop/sync fails vfio/common: Fix wrong %m usages vfio/common: Fix error reporting in vfio_get_dirty_bitmap() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-09Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into stagingPeter Maydell
Enable PV backends with Xen/KVM emulation This is phase 2, following on from the basic platform support which was already merged. • Add a simple single-tenant internal XenStore implementation • Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table • Provide emulated back ends for Xen operations • Header cleanups to allow PV back ends to build without Xen itself • Enable PV back ends in emulated mode • Documentation update Tested-by: Paul Durrant <paul@xen.org> ... on real Xen (master branch, 4.18) with a Debian guest. # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h # em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB # KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk # AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS # +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu # Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ # jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca # I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD # SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS # OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr # km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0 # VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18 # 1mq9v6Xe9RQZ # =JGLX # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT # gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544 # gpg: issuer "dwmw@amazon.co.uk" # gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown] # gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544 * tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits) docs: Update Xen-on-KVM documentation for PV disk support MAINTAINERS: Add entry for Xen on KVM emulation i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation hw/xen: Implement soft reset for emulated gnttab hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore hw/xen: Add emulated implementation of XenStore operations hw/xen: Add emulated implementation of grant table operations hw/xen: Hook up emulated implementation for event channel operations hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it hw/xen: Avoid crash when backend watch fires too early hw/xen: Build PV backend drivers for CONFIG_XEN_BUS hw/xen: Rename xen_common.h to xen_native.h hw/xen: Use XEN_PAGE_SIZE in PV backend drivers hw/xen: Move xenstore_store_pv_console_info to xen_console.c hw/xen: Add xenstore operations to allow redirection to internal emulation hw/xen: Add foreignmem operations to allow redirection to internal emulation hw/xen: Pass grant ref to gnttab unmap operation hw/xen: Add gnttab operations to allow redirection to internal emulation hw/xen: Add evtchn operations to allow redirection to internal emulation hw/xen: Create initial XenStore nodes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-09Merge tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu into ↵Peter Maydell
staging aspeed queue: * Small adjustments for the newest Meta machines * blk_pread_nonzeroes() fix required for pflash and m25p80 devices * Improve error reporting on file size for m25p80 devices # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQHXi8ACgkQUaNDx8/7 # 7KHB7w//SQzcTNAUgMc6zbe3bULS9YU7csg0zX896DwQ9Ub4wtbnIps0/JwOsx6E # ss52YbbRVlHKcbahX6WW8JHtc6Wepcmnp4vC5dXdqgRryLTK5GgBu/GKcBb6qnHZ # uXwJpf7IwygOXQFg9Wy4zl3ipmrjgzMy6ZEbc3oqQUto+8E7HVMJiMXnrT5Y0yLt # Y76PywBxkYWcd522lWAXziXFxHaEJGMGrDCI/op4TuNAk0QLSRHp+x851JBF0Uyx # Lkp1cEjgADoH1FUfvo7aCNtAWGP4IFDprEupI3idPqjZ8KnnwPk2cnBMGeKJ5lWQ # XfSTwG5B3hYwGM0uYwHzHXUsq5/JGa0iDhSvjZVD8rf/w9BTek/GjypbJpL2XW6b # 4QaGGKGFWWMHbAaNVP6oEGqmkoC3QRKoQuaP6epaFyuSjNRWXkOhf5S5V10akjSc # xis0Z8gIpyLrtFT2TFc5BN9+z+PLgyaYyh7wZ2pFy1i6SOgh4FIFBOzQJDb05mmf # aFMD+6FOGx0wo8OXfy5EQyElWhVSYio+Hx9DaDP3d3cd/twHJx8nZ8QlXh2ThRd8 # jNLdFReJBImCJHSmYzbc/tGDOjg6+TWkZOzdjqTra08UwisK4XyOKj8E+sodWr0y # e/hI9nmIoarLCytMN1zElQFvj8xjpZ2lZOxr2EiX5ugYg0iuJhU= # =Xs26 # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 15:54:23 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu: hw/arm/aspeed: Modified BMC FRU byte data in yosemitev2 hw/arm/aspeed: Added TMP421 type sensor's support in tiogapass hw/arm/aspeed: Added TMP421 type sensor's support in yosemitev2 pflash: Fix blk_pread_nonzeroes() m25p80: Improve error when the backend file size does not match the device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-09Merge tag 'mips-misc-20230308' of https://github.com/philmd/qemu into stagingPeter Maydell
MIPS (and few misc) patches - MIPS - Remove obsolete "mips" board from target-mips.rst - Fix JALS32/J32/SWM32 instructions for microMIPS - Fix CP0.Config7.WII handling on pre-R6 cores - HW - Revert "Remove intermediate IRQ forwarder" commits - Implement legacy LTIM Edge/Level Bank Select in Intel 8259 INTC - Improve PCI IRQ routing in VT82C686 / Pegasos II - Basic implementation of VIA AC97 audio playback - Implement 'resume on connection status change' in USB OHCI - UI - Override windowDidResignKey - memory - Dump HPA and access type in HMP 'info ramblock' # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmQHzH8ACgkQ4+MsLN6t # wN4RbxAAtbsbJKHikHevCiE9Fi0E4HHI4su00m3anImogfU3CKIHA7WHgeUVCdVH # aLoFKjvE3d45FA4YwMs13wIo89tv6btn1y8C9iy+yjktdABPUr8OJphuaDxU+yNf # XhPm4WsS0tEg5KzzTHF7qotJGw7Zd0Aca8oezFVBSL8b73lqiJiWBEouFTK9j5Oi # s1uvAOPG3oxSlT7IIbnLRIEff4hi5FZh+LxRDgE3ChcOyY2W/DhrpdVIazv9Cpki # facQ0ozMG4uuZ+HvviuTkK1vLX1+BcS0P1fnDPkXEPAxqx9jdqsMqWHbbnseQPN3 # xcVhw+GOZ67x8qAWIBKDG7nfChbcXgJ2sHxQmvb2XlxnOYw1oO5aRlrnn7ZPEWYA # NbqUHB8G88wDcrms+Y+xCfO8idnr7Kzf4/1R1J1+5yEjg8Y1wu4t0asqZvhXA2HL # F1yhHDCRY8w9pLYmPFGBrINBCoosiDn61g+JTngPffq1zJttmWjSLe9BYOF8Kiw+ # 4YjkCx43wK6RLTZNhU8g7iuqoYbHCQcXx5ZnGEadk+UJcfGrLnOrQbtAhvysS2wo # msyum0FNWhnx/IZ6bmhmbFC8F/hASgyiV9CDwU2oOZ2oAkRiFXYBfXruUAt+6uLT # UnAihAEsyUjyg5YNb4r8ZNkdeCPN6p3s2xY8OHphqu717K6uJXw= # =D/0W # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 23:45:03 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'mips-misc-20230308' of https://github.com/philmd/qemu: log: Remove unneeded new line memory: Dump HPA and access type of ramblocks ui/cocoa: Override windowDidResignKey hw/usb/ohci: Implement resume on connection status change hw/audio/via-ac97: Basic implementation of audio playback hw/usb/vt82c686-uhci-pci: Use PCI IRQ routing hw/ppc/pegasos2: Fix PCI interrupt routing hw/isa/vt82c686: Implement PCI IRQ routing hw/intc/i8259: Implement legacy LTIM Edge/Level Bank Select hw/display/sm501: Add debug property to control pixman usage Revert "hw/isa/vt82c686: Remove intermediate IRQ forwarder" Revert "hw/isa/i82378: Remove intermediate IRQ forwarder" hw/mips/itu: Pass SAAR using QOM link property hw/mips: Declare all length properties as unsigned target/mips: Set correct CP0.Config[4, 5] values for M14K(c) target/mips: Implement CP0.Config7.WII bit support target/mips: Fix SWM32 handling for microMIPS target/mips: Fix JALS32/J32 instruction handling for microMIPS target/mips: Replace [g_]assert(0) -> g_assert_not_reached() docs/system: Remove "mips" board from target-mips.rst Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-07virtio: fix reachable assertion due to stale value of cached region sizeCarlos López
In virtqueue_{split,packed}_get_avail_bytes() descriptors are read in a loop via MemoryRegionCache regions and calls to vring_{split,packed}_desc_read() - these take a region cache and the index of the descriptor to be read. For direct descriptors we use a cache provided by the caller, whose size matches that of the virtqueue vring. We limit the number of descriptors we can read by the size of that vring: max = vq->vring.num; ... MemoryRegionCache *desc_cache = &caches->desc; For indirect descriptors, we initialize a new cache and limit the number of descriptors by the size of the intermediate descriptor: len = address_space_cache_init(&indirect_desc_cache, vdev->dma_as, desc.addr, desc.len, false); desc_cache = &indirect_desc_cache; ... max = desc.len / sizeof(VRingDesc); However, the first initialization of `max` is done outside the loop where we process guest descriptors, while the second one is done inside. This means that a sequence of an indirect descriptor followed by a direct one will leave a stale value in `max`. If the second descriptor's `next` field is smaller than the stale value, but greater than the size of the virtqueue ring (and thus the cached region), a failed assertion will be triggered in address_space_read_cached() down the call chain. Fix this by initializing `max` inside the loop in both functions. Fixes: 9796d0ac8fb0 ("virtio: use address_space_map/unmap to access descriptors") Signed-off-by: Carlos López <clopez@suse.de> Message-Id: <20230302100358.3613-1-clopez@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/virtio/vhost-user: avoid using unitialized errpAlbert Esteve
During protocol negotiation, when we the QEMU stub does not support a backend with F_CONFIG, it throws a warning and supresses the VHOST_USER_PROTOCOL_F_CONFIG bit. However, the warning uses warn_reportf_err macro and passes an unitialized errp pointer. However, the macro tries to edit the 'msg' member of the unitialized Error and segfaults. Instead, just use warn_report, which prints a warning message directly to the output. Fixes: 5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported") Signed-off-by: Albert Esteve <aesteve@redhat.com> Message-Id: <20230302121719.9390-1-aesteve@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pxb-cxl: Support passthrough HDM Decoders unless overriddenJonathan Cameron
The CXL r3.0 specification allows for there to be no HDM decoders on CXL Host Bridges if they have only a single root port. Instead, all accesses directed to the host bridge (as specified in CXL Fixed Memory Windows) are assumed to be routed to the single root port. Linux currently assumes this implementation choice. So to simplify testing, make QEMU emulation also default to no HDM decoders under these particular circumstances, but provide a hdm_for_passthrough boolean option to have HDM decoders as previously. Technically this is breaking backwards compatibility, but given the only known software stack used with the QEMU emulation is the Linux kernel and this configuration did not work before this change, there are unlikely to be any complaints that it now works. The option is retained to allow testing of software that does allow for these HDM decoders to exist, once someone writes it. Reported-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -- v2: Pick up and fix typo in tag from Fan Ni Message-Id: <20230227153128.8164-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpersJonathan Cameron
These two helpers enable host bridges to operate differently depending on the number of downstream ports, in particular if there is only a single port. Useful for CXL where HDM address decoders are allowed to be implicit in the host bridge if there is only a single root port. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230227153128.8164-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-08hw/usb/ohci: Implement resume on connection status changeBALATON Zoltan
If certain bit is set remote wake up should change state from suspended to resume and generate interrupt. There was a todo comment for this, implement that by moving existing resume logic to a function and call that. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <35c4d4ccf2f73e6a87cdbd28fb6a1b33de72ed74.1676916640.git.balaton@eik.bme.hu> [PMD: Have ohci_resume() return a boolean] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/audio/via-ac97: Basic implementation of audio playbackBALATON Zoltan
Add basic implementation of the AC'97 sound part used in VIA south bridge chips. Not all features of the device is emulated, only one playback channel is supported for now but this is enough to get sound output from some guests using this device on pegasos2. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Volker Rümelin <vr_qemu@t-online.de> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <63b99410895312f40e7be479f581da0805e605a1.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/usb/vt82c686-uhci-pci: Use PCI IRQ routingBernhard Beschow
According to the PCI specification, PCI_INTERRUPT_LINE shall have no effect on hardware operations. Now that the VIA south bridges implement the internal PCI interrupt router let's be more conformant to the PCI specification. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Rene Engel <ReneEngel80@emailn.de> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <9fb86a74d16db65e3aafbb154238d55e123053eb.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/ppc/pegasos2: Fix PCI interrupt routingBALATON Zoltan
According to the PegasosII schematics the PCI interrupt lines are connected to both the gpp pins of the Mv64361 north bridge and the PINT pins of the VT8231 south bridge so guests can get interrupts from either of these. So far we only had the MV64361 connections which worked for on board devices but for additional PCI devices (such as network or sound card added with -device) guest OSes expect interrupt from the ISA IRQ 9 where the firmware routes these PCI interrupts in VT8231 ISA bridge. After the previous patches we can now model this and also remove the board specific connection from mv64361. Also configure routing of these lines when using Virtual Open Firmware to match board firmware for guests that expect this. This fixes PCI interrupts on pegasos2 under Linux, MorphOS and AmigaOS. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <520ff9e6eeef600ee14a4116c0c7b11940cc499c.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/isa/vt82c686: Implement PCI IRQ routingBALATON Zoltan
The real VIA south bridges implement a PCI IRQ router which is configured by the BIOS or the OS. In order to respect these configurations, QEMU needs to implement it as well. The real chip may allow routing IRQs from internal functions independently of PCI interrupts but since guests usually configute it to a single shared interrupt we don't model that here for simplicity. Note: The implementation was taken from piix4_set_irq() in hw/isa/piix4. Suggested-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <fbb016c7d0e19093335c237e15f5f6c62c4393b4.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/intc/i8259: Implement legacy LTIM Edge/Level Bank SelectDavid Woodhouse
Back in the mists of time, before EISA came along and required per-pin level control in the ELCR register, the i8259 had a single chip-wide level-mode control in bit 3 of ICW1. Even in the PIIX3 datasheet from 1996 this is documented as 'This bit is disabled', but apparently MorphOS is using it in the version of the i8259 which is in the Pegasos2 board as part of the VT8231 chipset. It's easy enough to implement, and I think it's harmless enough to do so unconditionally. Signed-off-by: David Woodhouse <dwmw2@infradead.org> [balaton: updated commit message as asked by author] Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <3f09b2dd109d19851d786047ad5c2ff459c90cd7.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/display/sm501: Add debug property to control pixman usageBALATON Zoltan
Add a property to allow disabling pixman and always use the fallbacks for different operations which is useful for testing different drawing methods or debugging pixman related issues. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <61768ffaefa71b65a657d1365823bd43c7ee9354.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08Revert "hw/isa/vt82c686: Remove intermediate IRQ forwarder"BALATON Zoltan
To be 'usable', QDev objects (which are QOM objects) must be 1/ initialized (at this point their properties can be modified), then 2/ realized (properties are consumed). Some devices (objects) might depend on other devices. When creating the 'QOM composition tree', parent objects can't be 'realized' until all their children are. We might also have circular dependencies. A common circular dependency occurs with IRQs. Device (A) has an output IRQ wired to device (B), and device (B) has one to device (A). When (A) is realized and connects its IRQ to an unrealized (B), the IRQ handler on (B) is not yet created. QEMU pass IRQ between objects as pointer. When (A) poll (B)'s IRQ, it is NULL. Later (B) is realized and its IRQ pointers are populated, but (A) keeps a reference to a NULL pointer. A common pattern to bypass this circular limitation is to use 'proxy' objects. Proxy (P) is created (and realized) before (A) and (B). Then (A) and (B) can be created in different order, it doesn't matter: (P) pointers are already populated. Commit bb98e0f59cde ("hw/isa/vt82c686: Remove intermediate IRQ forwarder") neglected the QOM/QDev circular dependency issue, and removed the 'proxy' between the southbridge, its PCI functions and the interrupt controller, resulting in PCI functions wiring output IRQs to 'NULL', leading to guest failures (IRQ never delivered) [1] [2]. Since we are entering feature freeze, it is safer to revert the offending patch until we figure a way to strengthen our APIs. [1] https://lore.kernel.org/qemu-devel/928a8552-ab62-9e6c-a492-d6453e338b9d@redhat.com/ [2] https://lore.kernel.org/qemu-devel/cover.1677628524.git.balaton@eik.bme.hu/ Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <cdfb3c5a42e505450f6803124f27856434c5b298.1677628524.git.balaton@eik.bme.hu> [PMD: Reworded description] Inspired-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08Revert "hw/isa/i82378: Remove intermediate IRQ forwarder"Philippe Mathieu-Daudé
To be 'usable', QDev objects (which are QOM objects) must be 1/ initialized (at this point their properties can be modified), then 2/ realized (properties are consumed). Some devices (objects) might depend on other devices. When creating the 'QOM composition tree', parent objects can't be 'realized' until all their children are. We might also have circular dependencies. A common circular dependency occurs with IRQs. Device (A) has an output IRQ wired to device (B), and device (B) has one to device (A). When (A) is realized and connects its IRQ to an unrealized (B), the IRQ handler on (B) is not yet created. QEMU pass IRQ between objects as pointer. When (A) poll (B)'s IRQ, it is NULL. Later (B) is realized and its IRQ pointers are populated, but (A) keeps a reference to a NULL pointer. A common pattern to bypass this circular limitation is to use 'proxy' objects. Proxy (P) is created (and realized) before (A) and (B). Then (A) and (B) can be created in different order, it doesn't matter: (P) pointers are already populated. Commit cef2e7148e ("hw/isa/i82378: Remove intermediate IRQ forwarder") neglected the QOM/QDev circular dependency issue, and removed the 'proxy' between the southbridge, its PCI functions and the interrupt controller, resulting in PCI functions wiring output IRQs to 'NULL', leading to guest failures (IRQ never delivered) [1] [2]. Since we are entering feature freeze, it is safer to revert the offending patch until we figure a way to strengthen our APIs. [1] https://lore.kernel.org/qemu-devel/928a8552-ab62-9e6c-a492-d6453e338b9d@redhat.com/ [2] https://lore.kernel.org/qemu-devel/cover.1677628524.git.balaton@eik.bme.hu/ This reverts commit cef2e7148e32d61338de0220619d308bf42af770. Reported-by: Thomas Huth <thuth@redhat.com> Inspired-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/mips/itu: Pass SAAR using QOM link propertyPhilippe Mathieu-Daudé
QOM objects shouldn't access each other internals fields except using the QOM API. mips_cps_realize() instantiates a TYPE_MIPS_ITU object, and directly sets the 'saar' pointer: if (saar_present) { s->itu.saar = &env->CP0_SAAR; } In order to avoid that, pass the MIPS_CPU object via a QOM link property, and set the 'saar' pointer in mips_itu_realize(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230203113650.78146-10-philmd@linaro.org>
2023-03-08hw/mips: Declare all length properties as unsignedPhilippe Mathieu-Daudé
Some length properties are signed, other unsigned: hw/mips/cps.c:183: DEFINE_PROP_UINT32("num-vp", MIPSCPSState, num_vp, 1), hw/mips/cps.c:184: DEFINE_PROP_UINT32("num-irq", MIPSCPSState, num_irq, 256), hw/misc/mips_cmgcr.c:215: DEFINE_PROP_INT32("num-vp", MIPSGCRState, num_vps, 1), hw/misc/mips_cpc.c:167: DEFINE_PROP_UINT32("num-vp", MIPSCPCState, num_vp, 0x1), hw/misc/mips_itu.c:552: DEFINE_PROP_INT32("num-fifo", MIPSITUState, num_fifo, hw/misc/mips_itu.c:554: DEFINE_PROP_INT32("num-semaphores", MIPSITUState, Since negative values are not used (the minimum is '0'), unify by declaring all properties as unsigned. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230203113650.78146-9-philmd@linaro.org>
2023-03-07vfio: Fix vfio_get_dev_region() trace eventCédric Le Goater
Simply transpose 'x8' to fix the typo and remove the ending '8' Fixes: e61a424f05 ("vfio: Create device specific region info helper") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1526 Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20230303074330.2609377-1-clg@kaod.org [aw: commit log s/revert/transpose/] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-03-07vfio/migration: Rename entry pointsAlex Williamson
Pick names that align with the section drivers should use them from, avoiding the confusion of calling a _finalize() function from _exit() and generalizing the actual _finalize() to handle removing the viommu blocker. Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/167820912978.606734.12740287349119694623.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-03-07hw/mem/cxl_type3: Add CXL RAS Error Injection Support.Jonathan Cameron
CXL uses PCI AER Internal errors to signal to the host that an error has occurred. The host can then read more detailed status from the CXL RAS capability. For uncorrectable errors: support multiple injection in one operation as this is needed to reliably test multiple header logging support in an OS. The equivalent feature doesn't exist for correctable errors, so only one error need be injected at a time. Note: - Header content needs to be manually specified in a fashion that matches the specification for what can be in the header for each error type. Injection via QMP: { "execute": "qmp_capabilities" } ... { "execute": "cxl-inject-uncorrectable-errors", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "errors": [ { "type": "cache-address-parity", "header": [ 3, 4] }, { "type": "cache-data-parity", "header": [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31] }, { "type": "internal", "header": [ 1, 2, 4] } ] }} ... { "execute": "cxl-inject-correctable-error", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "type": "physical" } } Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230302133709.30373-9-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pci/aer: Make PCIE AER error injection facility available for other ↵Jonathan Cameron
emulation to use. This infrastructure will be reused for CXL RAS error injection in patches that follow. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230302133709.30373-8-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/cxl: Fix endian issues in CXL RAS capability defaults / masksJonathan Cameron
As these are about to be modified, fix the endian handle for this set of registers rather than making it worse. Note that CXL is currently only supported in QEMU on x86 (arm64 patches out of tree) so we aren't going to yet hit an problems with big endian. However it is good to avoid making things worse for that support in the future. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230302133709.30373-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/mem/cxl-type3: Add AER extended capabilityJonathan Cameron
This enables AER error injection to function as expected. It is intended as a building block in enabling CXL RAS error injection in the following patches. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/pci-bridge/cxl_root_port: Wire up MSIJonathan Cameron
Done to avoid fixing ACPI route description of traditional PCI interrupts on q35 and because we should probably move with the times anyway. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/pci-bridge/cxl_root_port: Wire up AERJonathan Cameron
We are missing necessary config write handling for AER emulation in the CXL root port. Add it based on pcie_root_port.c Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/pci/aer: Add missing routing for AER errorsJonathan Cameron
PCIe r6.0 Figure 6-3 "Pseudo Logic Diagram for Selected Error Message Control and Status Bits" includes a right hand branch under "All PCI Express devices" that allows for messages to be generated or sent onwards without SERR# being set as long as the appropriate per error class bit in the PCIe Device Control Register is set. Implement that branch thus enabling routing of ERR_COR, ERR_NONFATAL and ERR_FATAL under OSes that set these bits appropriately (e.g. Linux) Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/pci/aer: Implement PCI_ERR_UNCOR_MASK registerJonathan Cameron
This register in AER should be both writeable and should have a default value with a couple of the errors masked including the Uncorrectable Internal Error used by CXL for it's error reporting. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callbackIgor Mammedov
Provide pcihp specific callback to check if bus is hotpluggable and consolidate its scattered hotplug criteria there. While at it clean up no longer needed qbus_set_hotplug_handler(BUS(bus), NULL) workarounds since callback makes qbus_is_hotpluggable() return correct answer even if hotplug_handler is set on bus. PS: see ("pci: fix 'hotplugglable' property behavior") for details why callback was introduced. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-35-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07pcihp: move fields enabling hotplug into AcpiPciHpStateIgor Mammedov
... instead of duplicating them in piix4 and lpc and then trying to pass them to pcihp routines as arguments. it simplifies call sites and places pcihp specific in its own structure. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-34-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07acpi: pci: move out ACPI PCI hotplug generator from generic slot generator ↵Igor Mammedov
build_append_pci_bus_devices() Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-33-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07acpi: pci: move BSEL into build_append_pcihp_slots()Igor Mammedov
Generic PCI enumeration code doesn't really need access to BSEL value, it is only used as means to decide if hotplug enumerator should be called. Use stateless object_property_find() to do that, and move the rest of BSEL handling into build_append_pcihp_slots() where it belongs. This cleans up generic code a bit from hotplug stuff and follow up patch will remove remaining call to build_append_pcihp_slots() from generic code, making it possible to use without ACPI PCI hotplug dependencies. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-32-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07acpi: pci: drop BSEL usage when deciding that device isn't hotpluggableIgor Mammedov
previous commit ("pci: fix 'hotplugglable' property behavior") fixed pcie root port's 'hotpluggable' property to behave consistently. So we don't need a BSEL crutch anymore to see of device is not hotpluggable, drop it from 'generic' PCI slots description handling. BSEL is still used to decide if hotplug part should be called but that will be moved out of generic code to hotplug one by followup patches. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-31-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07pci: move acpi-index uniqueness check to generic PCI device codeIgor Mammedov
acpi-index is now working with non-hotpluggable buses (pci/q35 machine hostbridge), it can be used even if ACPI PCI hotplug is disabled and as result acpi-index uniqueness check will be omitted (since the check is done by ACPI PCI hotplug handler, which isn't wired when ACPI PCI hotplug is disabled). Move check and related code to generic PCIDevice so it would be independent of ACPI PCI hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-30-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07acpi: pci: describe all functions on populated slotsIgor Mammedov
describing all present devices on functions other than 0 was complicated when non hotplug and hotplug code was intermixed. So QEMU has been excluding non zero functions since they are not supported by hotplug code, then a condition to whitelist coldplugged bridges was added and later whitelisting of devices that advertise presence of their own AML description. With non hotplug and hotplug code separated, it is possible to relax rules and allow describing all non-hotpluggble functions and hence simplify conditions whether PCI device should be enumerated by generic (non-hotplug) code. Price of that simplification is an extra few Device() descriptors in DSDT exposing built-in chipset functions, which has no functional effect on guest side. Apart from that, the enumeration of non zero functions, allows to attach more NICs with acpi-index enabled directly on hostbridge (if hotplug is not required). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-25-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 06:36:18 +0000