aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2018-10-19error: Fix use of error_prepend() with &error_fatal, &error_abortMarkus Armbruster
From include/qapi/error.h: * Pass an existing error to the caller with the message modified: * error_propagate(errp, err); * error_prepend(errp, "Could not frobnicate '%s': ", name); Fei Li pointed out that doing error_propagate() first doesn't work well when @errp is &error_fatal or &error_abort: the error_prepend() is never reached. Since I doubt fixing the documentation will stop people from getting it wrong, introduce error_propagate_prepend(), in the hope that it lures people away from using its constituents in the wrong order. Update the instructions in error.h accordingly. Convert existing error_prepend() next to error_propagate to error_propagate_prepend(). If any of these get reached with &error_fatal or &error_abort, the error messages improve. I didn't check whether that's the case anywhere. Cc: Fei Li <fli@suse.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181017082702.5581-2-armbru@redhat.com>
2018-10-18Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2018-10-17' into staging - Updates for qtest entries in test/Makefile.include - Simple updates for some shell scripts - Misc simple patches for files without regular subsystem pull requests # gpg: Signature made Wed 17 Oct 2018 08:20:35 BST # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" # gpg: aka "Thomas Huth <thuth@redhat.com>" # gpg: aka "Thomas Huth <huth@tuxfamily.org>" # gpg: aka "Thomas Huth <th.huth@posteo.de>" # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2018-10-17: configure: remove glib_subprocess check hw/core/generic-loader: Compile only once, not for each target cpu: Provide a proper prototype for target_words_bigendian() in a header hw/core/generic-loader: Set a category for the generic-loader device qemu/compiler: Wrap __attribute__((flatten)) in a macro mailmap: Fix Reimar Döffinger name show-fixed-bugs.sh: Modern shell scripting (use $() instead of ``) git-submodule.sh: Modern shell scripting (use $() instead of ``) archive-source.sh: Modern shell scripting (use $() instead of ``) MAINTAINERS: update block/sheepdog maintainers gdbstub: Remove unused include tests: remove gcov-files- variables tests: Prevent more accidental test disabling target/cris/translate: Get rid of qemu_log_separate() qemu-common.h: update copyright date to 2018 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-17hw/core/generic-loader: Compile only once, not for each targetThomas Huth
The generic-loader is currently compiled target specific due to one single "#ifdef TARGET_WORDS_BIGENDIAN" in the file. We have already a function called target_words_bigendian() for this instead, so we can put the generic-loader into common-obj to save some compilation time. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-17cpu: Provide a proper prototype for target_words_bigendian() in a headerThomas Huth
We've got three places already that provide a prototype for this function in a .c file - that's ugly. Let's provide a proper prototype in a header instead, with a proper description why this function should not be used in most cases. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-17hw/core/generic-loader: Set a category for the generic-loader deviceThomas Huth
Each device that is instantiatable by the users should be marked with a category. Since the generic-loader does not fit anywhere else, put it into the MISC category. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-16net: cadence_gem: Implement support for 64bit descriptor addressesEdgar E. Iglesias
Implement support for 64bit descriptor addresses. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181011021931.4249-8-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16net: cadence_gem: Add support for selecting the DMA MemoryRegionEdgar E. Iglesias
Add support for selecting the Memory Region that the GEM will do DMA to. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181011021931.4249-7-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16net: cadence_gem: Add support for extended descriptorsEdgar E. Iglesias
Add support for extended descriptors with optional 64bit addressing and timestamping. QEMU will not yet provide timestamps (always leaving the valid timestamp bit as zero). Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181011021931.4249-6-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16net: cadence_gem: Add macro with max number of descriptor wordsEdgar E. Iglesias
Add macro with max number of DMA descriptor words. No functional change. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181011021931.4249-5-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16net: cadence_gem: Use uint32_t for 32bit descriptor wordsEdgar E. Iglesias
Use uint32_t instead of unsigned to describe 32bit descriptor words. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181011021931.4249-4-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16net: cadence_gem: Disable TSU feature bitEdgar E. Iglesias
Disable the Timestamping Unit feature bit since QEMU does not yet support it. This allows guest SW to correctly probe for its existance. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181011021931.4249-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UARTJerome Forissier
Bindings for /secure-chosen and /secure-chosen/stdout-path have been proposed 1.5 years ago [1] and implemented in OP-TEE at the same time [2]. They've now been officially agreed on, so we can implement them in QEMU. This patch creates the property when the machine is secure. [1] https://patchwork.kernel.org/patch/9602401/ [2] https://github.com/OP-TEE/optee_os/commit/4dc31c52544a Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Message-id: 20181005080729.6480-1-jerome.forissier@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: commit message tweak] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-15vfio-pci: make vfio-pci device more QOM conventionalLi Qiang
Define a TYPE_VFIO_PCI and drop DO_UPCAST. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-15hw/arm/virt: Allow dynamic vfio-platform devices againGeert Uytterhoeven
Allow the instantation of generic dynamic vfio-platform devices again, without the need to create a new device-specific vfio type. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-15hw/arm/sysbus-fdt: Allow device matching with DT compatible valueEric Auger
Up to now we have relied on the device type to identify a device tree node creation function. Since we would like the vfio-platform device to be instantiable with different compatible strings we introduce the capability to specialize the node creation depending on actual compatible value. NodeCreationPair is renamed into BindingEntry. The struct is enhanced with compat and match_fn() fields. We introduce a new matching function adapted to the vfio-platform generic device. Soon, the AMD XGBE can be instantiated with either manner, i.e.: -device vfio-amd-xgbe,host=e0900000.xgmac or using the new option line: -device vfio-platform,host=e0900000.xgmac Signed-off-by: Eric Auger <eric.auger@redhat.com> [geert: Match using compatible values in sysfs instead of user-supplied manufacturer/model options, reword] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-15vfio/platform: Make the vfio-platform device non-abstractEric Auger
Up to now the vfio-platform device has been abstract and could not be instantiated. The integration of a new vfio platform device required creating a dummy derived device which only set the compatible string. Following the few vfio-platform device integrations we have seen the actual requested adaptation happens on device tree node creation (sysbus-fdt). Hence remove the abstract setting, and read the list of compatible values from sysfs if not set by a derived device. Update the amd-xgbe and calxeda-xgmac drivers to fill in the number of compatible values, as there can now be more than one. Note that sysbus-fdt does not support the instantiation of the vfio-platform device yet. Signed-off-by: Eric Auger <eric.auger@redhat.com> [geert: Rebase, set user_creatable=true, use compatible values in sysfs instead of user-supplied manufacturer/model options, reword] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-15hw/vfio/display: add ramfb supportGerd Hoffmann
So we have a boot display when using a vgpu as primary display. ramfb depends on a fw_cfg file. fw_cfg files can not be added and removed at runtime, therefore a ramfb-enabled vfio device can't be hotplugged. Add a nohotplug variant of the vfio-pci device (as child class). Add the ramfb property to the nohotplug variant only. So to enable the vgpu display with boot support use this: -device vfio-pci-nohotplug,display=on,ramfb=on,sysfsdev=... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-15hw/display/cirrus_vga: Move "isa-cirrus-vga" device into a separate fileThomas Huth
In downstream distros like RHEL we'd like to disable some of the "legacy" devices of QEMU. The ISA version of the Cirrus VGA device is one of these legacy devices. So let's make the build process a little bit more flexible here by putting the Cirrus ISA code into a separate file which is only included if both, CONFIG_VGA_CIRRUS and CONFIG_VGA_ISA are set. Note that this disables "isa-cirrus-vga" for the ppc-softmmu and the alpha-softmmu target since CONFIG_VGA_ISA is not set there. But I think this is OK since these targets are only interested in the PCI variant anyway. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1539339106-32427-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-15i2c: switch ddc to use the new edid generatorGerd Hoffmann
This also makes the default display resolution configurable, via xres and yres properties. The default is 1024x768. The old code had a hard-coded resolution of 1600x1200. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20181005110837.28209-1-kraxel@redhat.com
2018-10-15qxl: check qxl_phys2virt return valueGerd Hoffmann
Fixes: CID 1395986 Fixes: 979f7ef8966bc4495a710ed9e4af42098f92ee79 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181005134608.1251-1-kraxel@redhat.com
2018-10-15bochs-display: wire up edid supportGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20181005160147.892-3-kraxel@redhat.com
2018-10-15display: add separate config option for bochs-displayGerd Hoffmann
This allows modern architectures which don't care about vga compatibility (risc-v for example) build bochs-display without including all vga emulation too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181005160147.892-2-kraxel@redhat.com
2018-10-15edid: fix alignment issuesGerd Hoffmann
Use stl_le_p() & friends instead of casts. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20181015055333.32030-1-kraxel@redhat.com
2018-10-12Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181012' into stagingPeter Maydell
More s390x updates: - introduce support for vfio-ap (s390 crypto devices), including a Linux headers update to get the new interfaces - the usual fixing + cleanup # gpg: Signature made Fri 12 Oct 2018 10:54:38 BST # gpg: using RSA key DECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cohuck@redhat.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20181012: hw/s390x: Include the tod-qemu also for builds with --disable-tcg s390: doc: detailed specifications for AP virtualization s390x/vfio: ap: Introduce VFIO AP device s390x/ap: base Adjunct Processor (AP) object model s390x/kvm: enable AP instruction interpretation for guest s390x/cpumodel: Set up CPU model for AP device support linux-headers: update target/s390x/excp_helper: Remove DPRINTF() macro Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-12hw/s390x: Include the tod-qemu also for builds with --disable-tcgThomas Huth
The device is required for running qtests, see hw/s390x/tod.c: void s390_init_tod(void) { Object *obj; if (kvm_enabled()) { obj = object_new(TYPE_KVM_S390_TOD); } else { obj = object_new(TYPE_QEMU_S390_TOD); } [...] } During qtests, we're running without kvm, so TYPE_QEMU_S390_TOD is required to avoid that QEMU aborts here. Fixes: 8046f374a6 ("s390x/tod: factor out TOD into separate device") Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1539264723-741-1-git-send-email-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-12s390x/vfio: ap: Introduce VFIO AP deviceTony Krowiak
Introduces a VFIO based AP device. The device is defined via the QEMU command line by specifying: -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device> There may be only one vfio-ap device configured for a guest. The mediated matrix device is created by the VFIO AP device driver by writing a UUID to a sysfs attribute file (see docs/vfio-ap.txt). The mediated matrix device will be named after the UUID. Symbolic links to the $uuid are created in many places, so the path to the mediated matrix device $uuid can be specified in any of the following ways: /sys/devices/vfio_ap/matrix/$uuid /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid /sys/bus/mdev/devices/$uuid /sys/bus/mdev/drivers/vfio_mdev/$uuid When the vfio-ap device is realized, it acquires and opens the VFIO iommu group to which the mediated matrix device is bound. This causes a VFIO group notification event to be signaled. The vfio_ap device driver's group notification handler will get called at which time the device driver will configure the the AP devices to which the guest will be granted access. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-6-akrowiak@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [CH: added missing g_free and device category] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-12s390x/ap: base Adjunct Processor (AP) object modelTony Krowiak
Introduces the base object model for virtualizing AP devices. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-5-akrowiak@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-11qmp, hmp: make subsystem/system-vendor identities optionalDenis V. Lunev
According to PCI specification, subsystem id and subsystem vendor id are present only in type 0 and type 2 headers (at different offsets), but not in type 1 headers. Thus we should make this data optional in struct PciDeviceId and skip reporting them via HMP if the information is not available. Additional (wrong information) about PCI bridges (Type1 devices) has been added in 5383a705 and fortunately not released. This patch fixes that problem. The problem was spotted by Markus. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20181002135538.12113-1-den@openvz.org> Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-11vhost-user: Don't ask for reply on postcopy mem table setIlya Maximets
According to documentation, NEED_REPLY_MASK should not be set for VHOST_USER_SET_MEM_TABLE request in postcopy mode. This restriction was mistakenly applied to 'reply_supported' variable, which is local and used only for non-postcopy case. CC: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: 9bb38019942c ("vhost+postcopy: Send address back to qemu") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Message-Id: <20181002140947.4107-1-i.maximets@samsung.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-11vhost-user: Fix userfaultfd leakIlya Maximets
'fd' received from the vhost side is never freed. Also, everything (including 'postcopy_listen' state) should be cleaned up on vhost cleanup. Fixes: 46343570c06e ("vhost+postcopy: Wire up POSTCOPY_END notify") Fixes: f82c11165ffa ("vhost+postcopy: Register shared ufd with postcopy") Cc: qemu-stable@nongnu.org Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Message-Id: <20181008160536.6332-3-i.maximets@samsung.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-10ivshmem: Fix unplug of device "ivshmem-plain"Markus Armbruster
Commit 2aece63c8a "hostmem: detect host backend memory is being used properly" fixed "ivshmem-plain" to reject memory backends that are already in use, and to block their deletion while in use. Two bugs escaped review: * New ivshmem_plain_exit() fails to call ivshmem_exit(). This breaks unplug. Reproducer: migration after unplug still fails with "Migration is disabled when using feature 'peer mode' in device 'ivshmem'". * It failed to update legacy "ivshmem". Harmless, because it creates the memory backend itself, and nothing else should use it. Fix by moving the two host_memory_backend_set_mapped() calls into ivshmem_common_realize() and ivshmem_exit(), guarded by s->hostmem. Fixes: 2aece63c8a9d2c3a8ff41d2febc4cdeff2633331 Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180926163709.22876-1-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-08hw/display/bcm2835_fb: Silence Coverity warning about multiply overflowPeter Maydell
Coverity complains (CID 1395628) that the multiply in the calculation of the framebuffer base is performed as 32x32 but then used in a context that takes a 64-bit hwaddr. This can't actually ever overflow the 32-bit result, because of the constraints placed on the s->config values in bcm2835_fb_validate_config(). But we can placate Coverity anyway, by explicitly casting one of the inputs to a hwaddr, so the whole expression is calculated with 64-bit arithmetic. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20181005133012.26490-1-peter.maydell@linaro.org
2018-10-08virt: Suppress external aborts on virt-2.10 and earlierPeter Maydell
In commit c79c0a314c43b78 we enabled emulation of external aborts when the guest attempts to access a physical address with no mapped device. In commit 4672cbd7bed88dc6 we suppress this for most legacy boards to prevent breakage of previously working guests, but we didn't suppress it in the 'virt' board, with the rationale "we know that guests won't try to prod devices that we don't describe in the device tree or ACPI tables". This is mostly true, but we've had a report of a Linux guest image that this did break. The problem seems to be that the guest is (incorrectly) configured with a DEBUG_UART_PHYS value that tells it there is a uart at 0x10009000 (which is true for vexpress but not for virt), so in early bootup the kernel probes this bogus address. This is a misconfigured guest, so we don't need to worry about it too much, but we can arrange that guests that ran on QEMU v2.10 (before c79c0a314c43b78) will still run on the "virt-2.10" board model, by suppressing external aborts only for that version and earlier. This seems a reasonable compromise: "virt-2.10" is supposed to behave the same way that "virt" did in the 2.10 release, and making it do that provides a usable workaround for guests with bugs like this. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180925144127.31965-1-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-10-05Merge remote-tracking branch 'remotes/kraxel/tags/vga-20181005-pull-request' ↵Peter Maydell
into staging vga: edid fixes, qxl clang workaround, vga mmio subregion fix. # gpg: Signature made Fri 05 Oct 2018 12:11:40 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20181005-pull-request: edid: fix vendor default secondary-vga: delete mmio subregions upon exit hw/display/qxl: Suppress clang-7 warning about misaligned atomic operation edid: Ignore built binary Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-05Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181004' into stagingPeter Maydell
Various s390x updates: - fix several struct definitions so that sparc hosts do not trip over unaligned accesses - fence enabling huge pages for pre-3.1 machines - sysbus init -> realize conversion - fixes and improvements in tcg (instruction flags and AFP registers) # gpg: Signature made Thu 04 Oct 2018 16:22:20 BST # gpg: using RSA key DECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cohuck@redhat.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20181004: hw/s390x/s390-pci-bus: Convert sysbus init function to realize function s390x/tcg: refactor specification checking s390x/tcg: fix FP register pair checks s390x/tcg: handle privileged instructions via flags s390x/tcg: check for AFP-register, BFP and DFP data exceptions s390x/tcg: add instruction flags for floating point instructions s390x/tcg: support flags for instructions s390x/tcg: store in the TB flags if AFP is enabled s390x/tcg: factor out and fix DATA exception injection s390x: move tcg_s390_program_interrupt() into TCG code and mark it noreturn target/s390x: exception on non-aligned LPSW(E) s390x: Fence huge pages prior to 3.1 hw/s390x/ioinst: Fix alignment problem in struct SubchDev hw/s390x/css: Remove QEMU_PACKED from struct SenseId hw/s390x/ipl: Fix alignment problems of S390IPLState members Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-05edid: fix vendor defaultGerd Hoffmann
"EMU" actually is "Emulex Corporation", so not a good idea to use that by default. Lets use the Red Hat vendor id instead, which is in line with the pci ids which are allocated from Red Hat vendor ids too. Vendor list is available from http://www.uefi.org/pnp_id_list Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20181005091934.12143-1-kraxel@redhat.com
2018-10-05secondary-vga: delete mmio subregions upon exitremy.noel
93abfc88bd649de1933588bfc7175605331b3ea9 introduced a reference cycle in the vga-pci devices, preventing cleanup of the object upon hotblug. This patch allows to break the cycle. Signed-off-by: remy.noel <remy.noel@blade-group.com> Message-id: 20181002121935.23706-1-remy.noel@blade-group.com [ kraxel: delete the recently added edid region too ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-05hw/display/qxl: Suppress clang-7 warning about misaligned atomic operationPeter Maydell
If QEMU is compiled with clang-7 it results in the warning: hw/display/qxl.c:1884:19: error: misaligned or large atomic operation may incur significant performance penalty [-Werror,-Watomic-alignment] old_pending = atomic_fetch_or(&d->ram->int_pending, le_events); ^ This is because the Spice headers forgot to define the QXLRam struct with the '__aligned__(4)' attribute. clang 7 and newer will thus warn that the access here to int_pending might not be 4-aligned (because the QXLRam object d->ram points at might start at a misaligned address). In fact we set up d->ram in init_qxl_ram() so it always starts at a 4K boundary, so we know the atomic access here is OK. Newer Spice versions (with Spice commit beda5ec7a6848be20c0cac2a9a8ef2a41e8069c1) will fix the bug; for older Spice versions, work around it by telling the compiler explicitly that the alignment is OK using __builtin_assume_aligned(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180927155538.699-1-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-04hw/s390x/s390-pci-bus: Convert sysbus init function to realize functionThomas Huth
The SysBusDeviceClass->init() interface is considered as a legacy interface and there are currently some efforts going on to get rid of it. Thus let's convert the init function in the s390x code to realize() instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1538466491-2073-1-git-send-email-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-04s390x: Fence huge pages prior to 3.1Janosch Frank
As the kernel has no way of disallowing the start of a huge page backed VM, we can migrate a running huge backed VM to a host that has no huge page KVM support. Let's glue huge page support support to the 3.1 machine, so we do not migrate to a destination host that doesn't have QEMU huge page support and can stop migration if KVM doesn't indicate support. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20180928093435.198573-1-frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-04hw/s390x/css: Remove QEMU_PACKED from struct SenseIdThomas Huth
The uint16_t member cu_type of struct SenseId is not naturally aligned, and since the struct is marked with QEMU_PACKED, this can lead to unaligned memory accesses - which does not work on architectures like Sparc. Thus remove the QEMU_PACKED here and rather copy the struct byte by byte when we do copy_sense_id_to_guest(). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1538036615-32542-3-git-send-email-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-04hw/s390x/ipl: Fix alignment problems of S390IPLState membersThomas Huth
The IplParameterBlock and QemuIplParameters structures are declared with QEMU_PACKED, so the compiler assumes that the structures do not need to be aligned in memory. Since the are listed after a "bool" within the S390IPLState, the IplParameterBlock and QemuIplParameters are also indeed mis-aligned in memory. This causes problems on Sparc during migration, since we use VMSTATE_UINT16 in vmstate_iplb to access the devno member for example, and the corresponding migration functions (like qemu_get_be16s) then try to access a 16-bit value from a misaligned memory address. The easiest solution to fix this problem is to move the packed structures to the beginning of the S390IPLState, right after the DeviceState of course which has to stay first for QOM reasons. But since DeviceState is a non-packed struct, we can be sure that it will be padded to the correct alignment at the end. If not, the QEMU_BUILD_BUG_MSG in this patch will tell us. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1538036615-32542-2-git-send-email-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-03chardev: mark the calls that allow an implicit mux monitorMarc-André Lureau
This is mostly for readability of the code. Let's make it clear which callers can create an implicit monitor when the chardev is muxed. This will also enforce a safer behaviour, as we don't really support creating monitor anywhere/anytime at the moment. Add an assert() to make sure the programmer explicitely wanted that behaviour. There are documented cases, such as: -serial/-parallel/-virtioconsole and to less extent -debugcon. Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen console. Add a FIXME note for those, but keep the support for now. Other qemu_chr_new() callers either have a fixed parameter/filename string or do not need it, such as -qtest: * qtest.c: qtest_init() Afaik, only used by tests/libqtest.c, without mux. I don't think we support it outside of qemu testing: drop support for implicit mux monitor (qemu_chr_new() call: no implicit mux now). * hw/ All with literal @filename argument that doesn't enable mux monitor. * tests/ All with @filename argument that doesn't enable mux monitor. On a related note, the list of monitor creation places: - the chardev creators listed above: all from command line (except perhaps Xen console?) - -gdb & hmp gdbserver will create a "GDB monitor command" chardev that is wired to an HMP monitor. - -mon command line option From this short study, I would like to think that a monitor may only be created in the main thread today, though I remain skeptical :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-10-02hw/scsi/mptendian: Avoid taking address of fields in packed structsPeter Maydell
Taking the address of a field in a packed struct is a bad idea, because it might not be actually aligned enough for that pointer type (and thus cause a crash on dereference on some host architectures). Newer versions of clang warn about this. Avoid the bug by not using the "modify in place" byte swapping functions. This patch was produced with the following simple spatch script: @@ expression E; @@ -le16_to_cpus(&E); +E = le16_to_cpu(E); @@ expression E; @@ -le32_to_cpus(&E); +E = le32_to_cpu(E); @@ expression E; @@ -le64_to_cpus(&E); +E = le64_to_cpu(E); @@ expression E; @@ -cpu_to_le16s(&E); +E = cpu_to_le16(E); @@ expression E; @@ -cpu_to_le32s(&E); +E = cpu_to_le32(E); @@ expression E; @@ -cpu_to_le64s(&E); +E = cpu_to_le64(E); followed by some minor tidying of overlong lines and bad indent. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180927134852.21490-1-peter.maydell@linaro.org> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02hw/nvram/fw_cfg: Use memberwise copy of MemoryRegionOps structPeter Maydell
We've now removed the 'old_mmio' member from MemoryRegionOps, so we can perform the copy as a simple struct copy rather than having to do it via a memberwise copy. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180824170422.5783-3-peter.maydell@linaro.org> Based-on: <20180802174042.29234-1-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02virtio: do not take address of packed membersPaolo Bonzini
The address of a packed member is not packed, which may cause accesses to unaligned pointers. Avoid this by reading the packed value before passing it to another function. Cc: Jason Wang <jasowang@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02replay: replay BH for IDE trim operationPavel Dovgalyuk
This patch makes IDE trim BH deterministic, because it affects the device state. Therefore its invocation should be replayed instead of running at the random moment. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180912081950.3228.68987.stgit@pasha-VirtualBox> Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02lsi53c895a: convert to trace-eventsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20180917053229.4853-1-mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02scsi-block: Deprecate rotation_rateFam Zheng
This option is added together with scsi-disk but is never honoured, becuase we don't emulate the VPD page for scsi-block. We could intercept and inject the user specified value like for max xfer len, but it's probably not helpful since the intent of 070f80095ad was for random entropy aspects, not for performance. If emulated rotation rate is desired, scsi-hd is more suitable. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20180917083138.3948-1-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02kvmclock: run KVM_KVMCLOCK_CTRL ioctl in vcpu threadYongji Xie
According to KVM API Documentation, we should only run vcpu ioctls from the same thread that was used to create the vcpu. This patch makes KVM_KVMCLOCK_CTRL ioctl consistent with the Documentation. No functional change. Signed-off-by: Yongji Xie <xieyongji@baidu.com> Signed-off-by: Chai Wen <chaiwen@baidu.com> Message-Id: <1531315364-2551-1-git-send-email-xieyongji@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yongji Xie <elohimes@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-21 19:41:36 +0000