aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2023-05-18hw/virtio/vhost-user: avoid using unitialized errpAlbert Esteve
During protocol negotiation, when we the QEMU stub does not support a backend with F_CONFIG, it throws a warning and supresses the VHOST_USER_PROTOCOL_F_CONFIG bit. However, the warning uses warn_reportf_err macro and passes an unitialized errp pointer. However, the macro tries to edit the 'msg' member of the unitialized Error and segfaults. Instead, just use warn_report, which prints a warning message directly to the output. Fixes: 5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported") Signed-off-by: Albert Esteve <aesteve@redhat.com> Message-Id: <20230302121719.9390-1-aesteve@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 90e31232cf8fa7f257263dd431ea954a1ae54bff) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fieldsPeter Maydell
In allwinner-sun8i-emac we just read directly from guest memory into a host FrameDescriptor struct and back. This only works on little-endian hosts. Reading and writing of descriptors is already abstracted into functions; make those functions also handle the byte-swapping so that TransferDescriptor structs as seen by the rest of the code are always in host-order, and fix two places that were doing ad-hoc descriptor reading without using the functions. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424165053.1428857-3-peter.maydell@linaro.org (cherry picked from commit a4ae17e5ec512862bf73e40dfbb1e7db71f2c1e7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/sd/allwinner-sdhost: Correctly byteswap descriptor fieldsPeter Maydell
In allwinner_sdhost_process_desc() we just read directly from guest memory into a host TransferDescriptor struct and back. This only works on little-endian hosts. Abstract the reading and writing of descriptors into functions that handle the byte-swapping so that TransferDescriptor structs as seen by the rest of the code are always in host-order. This fixes a failure of one of the avocado tests on s390. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424165053.1428857-2-peter.maydell@linaro.org (cherry picked from commit 3e20d90824c262de6887aa1bc52af94db69e4310) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()Peter Maydell
The Allwinner PIC model uses set_bit() and clear_bit() to update the values in its irq_pending[] array when an interrupt arrives. However it is using these functions wrongly: they work on an array of type 'long', and it is passing an array of type 'uint32_t'. Because the code manually figures out the right array element, this works on little-endian hosts and on 32-bit big-endian hosts, where bits 0..31 in a 'long' are in the same place as they are in a 'uint32_t'. However it breaks on 64-bit big-endian hosts. Remove the use of set_bit() and clear_bit() in favour of using deposit32() on the array element. This fixes a bug where on big-endian 64-bit hosts the guest kernel would hang early on in bootup. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424152833.1334136-1-peter.maydell@linaro.org (cherry picked from commit 2c5fa0778c3b4307f9f3af7f27886c46d129c62f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/arm/raspi: Use arm_write_bootloader() to write boot codePeter Maydell
When writing the secondary-CPU stub boot loader code to the guest, use arm_write_bootloader() instead of directly calling rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because arm_write_bootloader() will correctly byte-swap the host-byte-order array values into the guest-byte-order to write into the guest memory. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424152717.1333930-4-peter.maydell@linaro.org (cherry picked from commit 0acbdb4c4ab6b0a09f159bae4899b0737cf64242) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/arm/aspeed: Use arm_write_bootloader() to write the bootloaderCédric Le Goater
When writing the secondary-CPU stub boot loader code to the guest, use arm_write_bootloader() instead of directly calling rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because arm_write_bootloader() will correctly byte-swap the host-byte-order array values into the guest-byte-order to write into the guest memory. Cc: qemu-stable@nongnu.org Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230424152717.1333930-3-peter.maydell@linaro.org [PMM: Moved the "make arm_write_bootloader() function public" part to its own patch; updated commit message to note that this fixes an actual bug; adjust to the API changes noted in previous commit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 902bba549fc386b4b9805320ed1a2e5b68478bdd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/arm/boot: Make write_bootloader() public as arm_write_bootloader()Cédric Le Goater
The arm boot.c code includes a utility function write_bootloader() which assists in writing a boot-code fragment into guest memory, including handling endianness and fixing it up with entry point addresses and similar things. This is useful not just for the boot.c code but also in board model code, so rename it to arm_write_bootloader() and make it globally visible. Since we are making it public, make its API a little neater: move the AddressSpace* argument to be next to the hwaddr argument, and allow the fixupcontext array to be const, since we never modify it in this function. Cc: qemu-stable@nongnu.org Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org [PMM: Split out from another patch by Cédric, added doc comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 0fe43f0abf19bbe24df3dbf0613bb47ed55f1482) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()Peter Maydell
The msf2-emac ethernet controller has functions emac_load_desc() and emac_store_desc() which read and write the in-memory descriptor blocks and handle conversion between guest and host endianness. As currently written, emac_store_desc() does the endianness conversion in-place; this means that it effectively consumes the input EmacDesc struct, because on a big-endian host the fields will be overwritten with the little-endian versions of their values. Unfortunately, in all the callsites the code continues to access fields in the EmacDesc struct after it has called emac_store_desc() -- specifically, it looks at the d.next field. The effect of this is that on a big-endian host networking doesn't work because the address of the next descriptor is corrupted. We could fix this by making the callsite avoid using the struct; but it's more robust to have emac_store_desc() leave its input alone. (emac_load_desc() also does an in-place conversion, but here this is fine, because the function is supposed to be initializing the struct.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230424151919.1333299-1-peter.maydell@linaro.org (cherry picked from commit d565f58b38424e9a390a7ea33ff7477bab693fda) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18acpi: pcihp: allow repeating hot-unplug requestsIgor Mammedov
with Q35 using ACPI PCI hotplug by default, user's request to unplug device is ignored when it's issued before guest OS has been booted. And any additional attempt to request device hot-unplug afterwards results in following error: "Device XYZ is already in the process of unplug" arguably it can be considered as a regression introduced by [2], before which it was possible to issue unplug request multiple times. Accept new uplug requests after timeout (1ms). This brings ACPI PCI hotplug on par with native PCIe unplug behavior [1] and allows user to repeat unplug requests at propper times. Set expire timeout to arbitrary 1msec so user won't be able to flood guest with SCI interrupts by calling device_del in tight loop. PS: ACPI spec doesn't mandate what OSPM can do with GPEx.status bits set before it's booted => it's impl. depended. Status bits may be retained (I tested with one Windows version) or cleared (Linux since 2.6 kernel times) during guest's ACPI subsystem initialization. Clearing status bits (though not wrong per se) hides the unplug event from guest, and it's upto user to repeat device_del later when guest is able to handle unplug requests. 1) 18416c62e3 ("pcie: expire pending delete") 2) Fixes: cce8944cc9ef ("qdev-monitor: Forbid repeated device_del") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> CC: mst@redhat.com CC: anisinha@redhat.com CC: jusual@redhat.com CC: kraxel@redhat.com Message-Id: <20230418090449.2155757-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> (cherry picked from commit 0f689cf5ada4d5df5ab95c7f7aa9fc221afa855d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-13hw/nvme: fix memory leak in nvme_dsmKlaus Jensen
The iocb (and the allocated memory to hold LBA ranges) leaks if reading the LBA ranges fails. Fix this by adding a free and an unref of the iocb. Reported-by: Coverity (CID 1508281) Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> (cherry picked from commit 4b32319cdacd99be983e1a74128289ef52c5964e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-10hw/arm: do not free machine->fdt in arm_load_dtb()Markus Armbruster
At this moment, arm_load_dtb() can free machine->fdt when binfo->dtb_filename is NULL. If there's no 'dtb_filename', 'fdt' will be retrieved by binfo->get_dtb(). If get_dtb() returns machine->fdt, as is the case of machvirt_dtb() from hw/arm/virt.c, fdt now has a pointer to machine->fdt. And, in that case, the existing g_free(fdt) at the end of arm_load_dtb() will make machine->fdt point to an invalid memory region. Since monitor command 'dumpdtb' was introduced a couple of releases ago, running it with any ARM machine that uses arm_load_dtb() will crash QEMU. Let's enable all arm_load_dtb() callers to use dumpdtb properly. Instead of freeing 'fdt', assign it back to ms->fdt. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Fixes: bf353ad55590f ("qmp/hmp, device_tree.c: introduce dumpdtb") Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-id: 20230328165935.1512846-1-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 12148d442ec3f4386c8624ffcf44c61a8b344018) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-30hw/pvrdma: Protect against buggy or malicious guest driverYuval Shaia
Guest driver might execute HW commands when shared buffers are not yet allocated. This could happen on purpose (malicious guest) or because of some other guest/host address mapping error. We need to protect againts such case. Fixes: CVE-2022-1050 Reported-by: Raven <wxhusst@gmail.com> Signed-off-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Message-Id: <20220403095234.2210-1-yuval.shaia.ml@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu> (cherry picked from commit 31c4b6fb0293e359f9ef8a61892667e76eea4c99) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-30hw/net/vmxnet3: allow VMXNET3_MAX_MTU itself as a valueFiona Ebner
Currently, VMXNET3_MAX_MTU itself (being 9000) is not considered a valid value for the MTU, but a guest running ESXi 7.0 might try to set it and fail the assert [0]. In the Linux kernel, dev->max_mtu itself is a valid value for the MTU and for the vmxnet3 driver it's 9000, so a guest running Linux will also fail the assert when trying to set an MTU of 9000. VMXNET3_MAX_MTU and s->mtu don't seem to be used in relation to buffer allocations/accesses, so allowing the upper limit itself as a value should be fine. [0]: https://forum.proxmox.com/threads/114011/ Fixes: d05dcd94ae ("net: vmxnet3: validate configuration values during activate (CVE-2021-20203)") Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 099a63828130843741d317cb28e936f468b2b53b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29intel-iommu: fail DEVIOTLB_UNMAP without dt modeJason Wang
Without dt mode, device IOTLB notifier won't work since guest won't send device IOTLB invalidation descriptor in this case. Let's fail early instead of misbehaving silently. Reviewed-by: Laurent Vivier <lvivier@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Tested-by: Viktor Prutyanov <viktor@daynix.com> Buglink: https://bugzilla.redhat.com/2156876 Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230223065924.42503-3-jasowang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 09adb0e021207b60a0c51a68939b4539d98d3ef3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29intel-iommu: fail MAP notifier without caching modeJason Wang
Without caching mode, MAP notifier won't work correctly since guest won't send IOTLB update event when it establishes new mappings in the I/O page tables. Let's fail the IOMMU notifiers early instead of misbehaving silently. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Viktor Prutyanov <viktor@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230223065924.42503-2-jasowang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit b8d78277c091f26fdd64f239bc8bb7e55d74cecf) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29vhost: avoid a potential use of an uninitialized variable in vhost_svq_poll()Carlos López
In vhost_svq_poll(), if vhost_svq_get_buf() fails due to a device providing invalid descriptors, len is left uninitialized and returned to the caller, potentally leaking stack data or causing undefined behavior. Fix this by initializing len to 0. Found with GCC 13 and -fanalyzer (abridged): ../hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_svq_poll’: ../hw/virtio/vhost-shadow-virtqueue.c:538:12: warning: use of uninitialized value ‘len’ [CWE-457] [-Wanalyzer-use-of-uninitialized-value] 538 | return len; | ^~~ ‘vhost_svq_poll’: events 1-4 | | 522 | size_t vhost_svq_poll(VhostShadowVirtqueue *svq) | | ^~~~~~~~~~~~~~ | | | | | (1) entry to ‘vhost_svq_poll’ |...... | 525 | uint32_t len; | | ~~~ | | | | | (2) region created on stack here | | (3) capacity: 4 bytes |...... | 528 | if (vhost_svq_more_used(svq)) { | | ~ | | | | | (4) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_poll’ (...) | 528 | if (vhost_svq_more_used(svq)) { | | ^~~~~~~~~~~~~~~~~~~~~~~~~ | | || | | |(8) ...to here | | (7) following ‘true’ branch... |...... | 537 | vhost_svq_get_buf(svq, &len); | | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | | | (9) calling ‘vhost_svq_get_buf’ from ‘vhost_svq_poll’ | +--> ‘vhost_svq_get_buf’: events 10-11 | | 416 | static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq, | | ^~~~~~~~~~~~~~~~~ | | | | | (10) entry to ‘vhost_svq_get_buf’ |...... | 423 | if (!vhost_svq_more_used(svq)) { | | ~ | | | | | (11) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_get_buf’ | (...) | ‘vhost_svq_get_buf’: event 14 | | 423 | if (!vhost_svq_more_used(svq)) { | | ^ | | | | | (14) following ‘false’ branch... | ‘vhost_svq_get_buf’: event 15 | |cc1: | (15): ...to here | <------+ | ‘vhost_svq_poll’: events 16-17 | | 537 | vhost_svq_get_buf(svq, &len); | | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | | | (16) returning to ‘vhost_svq_poll’ from ‘vhost_svq_get_buf’ | 538 | return len; | | ~~~ | | | | | (17) use of uninitialized value ‘len’ here Note by Laurent Vivier <lvivier@redhat.com>: The return value is only used to detect an error: vhost_svq_poll vhost_vdpa_net_cvq_add vhost_vdpa_net_load_cmd vhost_vdpa_net_load_mac -> a negative return is only used to detect error vhost_vdpa_net_load_mq -> a negative return is only used to detect error vhost_vdpa_net_handle_ctrl_avail -> a negative return is only used to detect error Fixes: d368c0b052ad ("vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush") Signed-off-by: Carlos López <clopez@suse.de> Message-Id: <20230213085747.19956-1-clopez@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit e4dd39c699b7d63a06f686ec06ded8adbee989c1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29vdpa: stop all svq on device deletionEugenio Pérez
Not stopping them leave the device in a bad state when virtio-net fronted device is unplugged with device_del monitor command. This is not triggable in regular poweroff or qemu forces shutdown because cleanup is called right after vhost_vdpa_dev_start(false). But devices hot unplug does not call vdpa device cleanups. This lead to all the vhost_vdpa devices without stop the SVQ but the last. Fix it and clean the code, making it symmetric with vhost_vdpa_svqs_start. Fixes: dff4426fa656 ("vhost: Add Shadow VirtQueue kick forwarding capabilities") Reported-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230209170004.899472-1-eperezma@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 2e1a9de96b487cf818a22d681cad8d3f5d18dcca) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Mjt: this required manual edit for stable-7.2
2023-03-29hw/timer/hpet: Fix expiration time overflowAkihiko Odaki
The expiration time provided for timer_mod() can overflow if a ridiculously large value is set to the comparator register. The resulting value can represent a past time after rounded, forcing the timer to fire immediately. If the timer is configured as periodic, it will rearm the timer again, and form an endless loop. Check if the expiration value will overflow, and if it will, stop the timer instead of rearming the timer with the overflowed time. This bug was found by Alexander Bulekov when fuzzing igb, a new network device emulation: https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/ The fixed test case is: fuzz/crash_2d7036941dcda1ad4380bb8a9174ed0c949bcefd Fixes: 16b29ae180 ("Add HPET emulation to qemu (Beth Kon)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20230131030037.18856-1-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 37d2bcbc2a4e9c2e9061bec72a32c7e49b9f81ec) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29virtio-rng-pci: fix transitional migration compat for vectorsDr. David Alan Gilbert
In bad9c5a516 ("virtio-rng-pci: fix migration compat for vectors") I fixed the virtio-rng-pci migration compatibility, but it was discovered that we also need to fix the other aliases of the device for the transitional cases. Fixes: 9ea02e8f1 ('virtio-rng-pci: Allow setting nvectors, so we can use MSI-X') bz: https://bugzilla.redhat.com/show_bug.cgi?id=2162569 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20230207174944.138255-1-dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 62bdb8871512076841f4464f7e26efdc7783f78d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29virtio-rng-pci: fix migration compat for vectorsDr. David Alan Gilbert
Fixup the migration compatibility for existing machine types so that they do not enable msi-x. Symptom: (qemu) qemu: get_pci_config_device: Bad config data: i=0x34 read: 84 device: 98 cmask: ff wmask: 0 w1cmask:0 qemu: Failed to load PCIDevice:config qemu: Failed to load virtio-rng:virtio qemu: error while loading state for instance 0x0 of device '0000:00:03.0/virtio-rng' qemu: load of migration failed: Invalid argument Note: This fix will break migration from 7.2->7.2-fixed with this patch bz: https://bugzilla.redhat.com/show_bug.cgi?id=2155749 Fixes: 9ea02e8f1 ("virtio-rng-pci: Allow setting nvectors, so we can use MSI-X") Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20230109105809.163975-1-dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: David Daney <david.daney@fungible.com> Fixes: 9ea02e8f1 (&quot;virtio-rng-pci: Allow setting nvectors, so we can use MSI-X&quot;)<br> Signed-off-by: Dr. David Alan Gilbert &lt;<a href="mailto:dgilbert@redhat.com" target="_blank">dgilbert@redhat.com</a>&gt;<br> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> (cherry picked from commit bad9c5a5166fd5e3a892b7b0477cf2f4bd3a959a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29vhost-user-rng: Back up vqs before cleaning up vhost_devAkihiko Odaki
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free the memory pointed by the member. Fixes: 821d28b88f ("vhost-user-rng: Add vhost-user-rng implementation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20230130140516.78078-1-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit f0dac71596d4b87a1a77d1f4efb6a6adb4730d7b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29vhost-user-i2c: Back up vqs before cleaning up vhost_devAkihiko Odaki
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free the memory pointed by the member. Fixes: 7221d3b634 ("hw/virtio: add boilerplate for vhost-user-i2c device") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20230130140435.78049-1-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 0126793bee853e7c134627f51d2de5428a612e99) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29vhost-user-gpio: Configure vhost_dev when connectingAkihiko Odaki
vhost_dev_cleanup(), called from vu_gpio_disconnect(), clears vhost_dev so vhost-user-gpio must set the members of vhost_dev each time connecting. do_vhost_user_cleanup() should also acquire the pointer to vqs directly from VHostUserGPIO instead of referring to vhost_dev as it can be called after vhost_dev_cleanup(). Fixes: 27ba7b027f ("hw/virtio: add boilerplate for vhost-user-gpio device") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20230130140320.77999-1-akihiko.odaki@daynix.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit daae36c13abc73cf1055abc2d33cb71cc5d34310) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29Revert "hw/i386: pass RNG seed via setup_data entry"Michael S. Tsirkin
This reverts commit 67f7e426e53833a5db75b0d813e8d537b8a75bd2. Additionally to the automatic revert, I went over the code and dropped all mentions of legacy_no_rng_seed manually, effectively reverting a combination of 2 additional commits: commit ffe2d2382e5f1aae1abc4081af407905ef380311 Author: Jason A. Donenfeld <Jason@zx2c4.com> Date: Wed Sep 21 11:31:34 2022 +0200 x86: re-enable rng seeding via SetupData commit 3824e25db1a84fadc50b88dfbe27047aa2f7f85d Author: Gerd Hoffmann <kraxel@redhat.com> Date: Wed Aug 17 10:39:40 2022 +0200 x86: disable rng seeding via setup_data Fixes: 67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (cherry picked from commit 167f4873580d3729565044cda73c3e20997950f2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Mjt: this required manual edit for stable-7.2
2023-03-29Revert "x86: return modified setup_data only if read as memory, not as file"Michael S. Tsirkin
This reverts commit e935b735085dfa61d8e6d276b6f9e7687796a3c7. Fixes: e935b73508 ("x86: return modified setup_data only if read as memory, not as file") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (cherry picked from commit ae80d81cfa865cbe443543679e013e7fa5fcd12c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29Revert "x86: use typedef for SetupData struct"Michael S. Tsirkin
This reverts commit eebb38a5633a77f5fa79d6486d5b2fcf8fbe3c07. Fixes: eebb38a563 ("x86: use typedef for SetupData struct") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (cherry picked from commit ea96a784773259d469f3f2465f09e04eabb80a66) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29Revert "x86: reinitialize RNG seed on system reboot"Michael S. Tsirkin
This reverts commit 763a2828bf313ed55878b09759dc435355035f2e. Fixes: 763a2828bf ("x86: reinitialize RNG seed on system reboot") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (cherry picked from commit fdc27ced04160904af1f290b561eded73abb8f1d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29Revert "x86: re-initialize RNG seed when selecting kernel"Michael S. Tsirkin
This reverts commit cc63374a5a7c240b7d3be734ef589dabbefc7527. Fixes: cc63374a5a ("x86: re-initialize RNG seed when selecting kernel") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (cherry picked from commit b4bfa0a31d86caf89223e10e701c5b00df369b37) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29Revert "x86: do not re-randomize RNG seed on snapshot load"Michael S. Tsirkin
This reverts commit 14b29fea742034186403914b4d013d0e83f19e78. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: 14b29fea74 ("x86: do not re-randomize RNG seed on snapshot load") Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (cherry picked from commit ef82d893de6d5bc0023026e636eae0f9a3e319dd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29hw/smbios: fix field corruption in type 4 tableJulia Suvorova
Since table type 4 of SMBIOS version 2.6 is shorter than 3.0, the strings which follow immediately after the struct fields have been overwritten by unconditional filling of later fields such as core_count2. Make these fields dependent on the SMBIOS version. Fixes: 05e27d74c7 ("hw/smbios: add core_count2 to smbios table type 4") Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2169904 Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20230223125747.254914-1-jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 60d09b8dc7dd4256d664ad680795cb1327805b2b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29hw/nvme: fix missing cq eventidx updateKlaus Jensen
Prior to reading the shadow doorbell cq head, we have to update the eventidx. Otherwise, we risk that the driver will skip an mmio doorbell write. This happens on riscv64, as reported by Guenter. Adding the missing update to the cq eventidx fixes the issue. Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support") Cc: qemu-stable@nongnu.org Cc: qemu-riscv@nongnu.org Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> (cherry picked from commit fa5db2aa168bdc0f15c269b6212ef47632fab8ba) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29hw/nvme: fix missing endian conversions for doorbell buffersKlaus Jensen
The eventidx and doorbell value are not handling endianness correctly. Fix this. Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support") Cc: qemu-stable@nongnu.org Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> (cherry picked from commit 2fda0726e5149e032acfa5fe442db56cd6433c4c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Conflicts: hw/nvme/ctrl.c
2023-03-29acpi: cpuhp: fix guest-visible maximum access size to the legacy reg blockLaszlo Ersek
The modern ACPI CPU hotplug interface was introduced in the following series (aa1dd39ca307..679dd1a957df), released in v2.7.0: 1 abd49bc2ed2f docs: update ACPI CPU hotplug spec with new protocol 2 16bcab97eb9f pc: piix4/ich9: add 'cpu-hotplug-legacy' property 3 5e1b5d93887b acpi: cpuhp: add CPU devices AML with _STA method 4 ac35f13ba8f8 pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook 5 d2238cb6781d acpi: cpuhp: implement hot-add parts of CPU hotplug interface 6 8872c25a26cc acpi: cpuhp: implement hot-remove parts of CPU hotplug interface 7 76623d00ae57 acpi: cpuhp: add cpu._OST handling 8 679dd1a957df pc: use new CPU hotplug interface since 2.7 machine type Before patch#1, "docs/specs/acpi_cpu_hotplug.txt" only specified 1-byte accesses for the hotplug register block. Patch#1 preserved the same restriction for the legacy register block, but: - it specified DWORD accesses for some of the modern registers, - in particular, the switch from the legacy block to the modern block would require a DWORD write to the *legacy* block. The latter functionality was then implemented in cpu_status_write() [hw/acpi/cpu_hotplug.c], in patch#8. Unfortunately, all DWORD accesses depended on a dormant bug: the one introduced in earlier commit a014ed07bd5a ("memory: accept mismatching sizes in memory_region_access_valid", 2013-05-29); first released in v1.6.0. Due to commit a014ed07bd5a, the DWORD accesses to the *legacy* CPU hotplug register block would work in spite of the above series *not* relaxing "valid.max_access_size = 1" in "hw/acpi/cpu_hotplug.c": > static const MemoryRegionOps AcpiCpuHotplug_ops = { > .read = cpu_status_read, > .write = cpu_status_write, > .endianness = DEVICE_LITTLE_ENDIAN, > .valid = { > .min_access_size = 1, > .max_access_size = 1, > }, > }; Later, in commits e6d0c3ce6895 ("acpi: cpuhp: introduce 'Command data 2' field", 2020-01-22) and ae340aa3d256 ("acpi: cpuhp: spec: add typical usecases", 2020-01-22), first released in v5.0.0, the modern CPU hotplug interface (including the documentation) was extended with another DWORD *read* access, namely to the "Command data 2" register, which would be important for the guest to confirm whether it managed to switch the register block from legacy to modern. This functionality too silently depended on the bug from commit a014ed07bd5a. In commit 5d971f9e6725 ('memory: Revert "memory: accept mismatching sizes in memory_region_access_valid"', 2020-06-26), first released in v5.1.0, the bug from commit a014ed07bd5a was fixed (the commit was reverted). That swiftly exposed the bug in "AcpiCpuHotplug_ops", still present from the v2.7.0 series quoted at the top -- namely the fact that "valid.max_access_size = 1" didn't match what the guest was supposed to do, according to the spec ("docs/specs/acpi_cpu_hotplug.txt"). The symptom is that the "modern interface negotiation protocol" described in commit ae340aa3d256: > + Use following steps to detect and enable modern CPU hotplug interface: > + 1. Store 0x0 to the 'CPU selector' register, > + attempting to switch to modern mode > + 2. Store 0x0 to the 'CPU selector' register, > + to ensure valid selector value > + 3. Store 0x0 to the 'Command field' register, > + 4. Read the 'Command data 2' register. > + If read value is 0x0, the modern interface is enabled. > + Otherwise legacy or no CPU hotplug interface available falls apart for the guest: steps 1 and 2 are lost, because they are DWORD writes; so no switching happens. Step 3 (a single-byte write) is not lost, but it has no effect; see the condition in cpu_status_write() in patch#8. And step 4 *misleads* the guest into thinking that the switch worked: the DWORD read is lost again -- it returns zero to the guest without ever reaching the device model, so the guest never learns the switch didn't work. This means that guest behavior centered on the "Command data 2" register worked *only* in the v5.0.0 release; it got effectively regressed in v5.1.0. To make things *even more* complicated, the breakage was (and remains, as of today) visible with TCG acceleration only. Commit 5d971f9e6725 makes no difference with KVM acceleration -- the DWORD accesses still work, despite "valid.max_access_size = 1". As commit 5d971f9e6725 suggests, fix the problem by raising "valid.max_access_size" to 4 -- the spec now clearly instructs the guest to perform DWORD accesses to the legacy register block too, for enabling (and verifying!) the modern block. In order to keep compatibility for the device model implementation though, set "impl.max_access_size = 1", so that wide accesses be split before they reach the legacy read/write handlers, like they always have been on KVM, and like they were on TCG before 5d971f9e6725 (v5.1.0). Tested with: - OVMF IA32 + qemu-system-i386, CPU hotplug/hot-unplug with SMM, intermixed with ACPI S3 suspend/resume, using KVM accel (regression-test); - OVMF IA32X64 + qemu-system-x86_64, CPU hotplug/hot-unplug with SMM, intermixed with ACPI S3 suspend/resume, using KVM accel (regression-test); - OVMF IA32 + qemu-system-i386, SMM enabled, using TCG accel; verified the register block switch and the present/possible CPU counting through the modern hotplug interface, during OVMF boot (bugfix test); - I do not have any testcase (guest payload) for regression-testing CPU hotplug through the *legacy* CPU hotplug register block. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Ani Sinha <ani@anisinha.ca> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: qemu-stable@nongnu.org Ref: "IO port write width clamping differs between TCG and KVM" Link: http://mid.mail-archive.com/aaedee84-d3ed-a4f9-21e7-d221a28d1683@redhat.com Link: https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg00199.html Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230105161804.82486-1-lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit dab30fbef3896bb652a09d46c37d3f55657cbcbb) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29virtio-mem: Fix the iterator variable in a vmem->rdl_list loopChenyi Qiang
It should be the variable rdl2 to revert the already-notified listeners. Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20221228090312.17276-1-chenyi.qiang@intel.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> (cherry picked from commit 29f1b328e3b767cba2661920a8470738469b9e36) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29virtio-mem: Fix the bitmap index of the section offsetChenyi Qiang
vmem->bitmap indexes the memory region of the virtio-mem backend at a granularity of block_size. To calculate the index of target section offset, the block_size should be divided instead of the bitmap_size. Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20221216062231.11181-1-chenyi.qiang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: David Hildenbrand <david@redhat.com> (cherry picked from commit b11cf32e07a2f7ff0d171b89497381a04c9d07e0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-29vhost: fix vq dirty bitmap syncing when vIOMMU is enabledJason Wang
When vIOMMU is enabled, the vq->used_phys is actually the IOVA not GPA. So we need to translate it to GPA before the syncing otherwise we may hit the following crash since IOVA could be out of the scope of the GPA log size. This could be noted when using virtio-IOMMU with vhost using 1G memory. Fixes: c471ad0e9bd46 ("vhost_net: device IOTLB support") Cc: qemu-stable@nongnu.org Tested-by: Lei Yang <leiyang@redhat.com> Reported-by: Yalan Zhang <yalzhang@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221216033552.77087-1-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 345cc1cbcbce2bab00abc2b88338d7d89c702d6b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2022-12-05Revert "hw/loongarch/virt: Add cfi01 pflash device"Song Gao
This reverts commit 14dccc8ea6ece7ee63273144fb55e4770a05e0fd. Signed-off-by: Song Gao <gaosong@loongson.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20221205113007.683505-1-gaosong@loongson.cn>
2022-12-04Merge tag 'pull-request-2022-12-04' of https://gitlab.com/thuth/qemu into ↵Stefan Hajnoczi
staging * Fix potential undefined behavior in cleanup of migration-test * Fix a s390x instruction that causes Java to crash * Fix a typo in a comment in next-fb.c # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmOMRosRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbVh+Q/+PEMevD61MUr1xl5S1uJpur1Pddr+wSTy # w2PS6eluP8U6SzNZ2x4pGHBjW/ENfoAY/3UgXP5VBHFVaXDLLOfAhoFf7d/uhFLG # gMUDxPtpGMw8uZJY08R5irDLin/zjsVacKUQuXwC0qkOVaLJrkYeOYkLrRPcjS/Y # LiNGmFTVA+odrXX5zH7GPhl12hKrs8Uo44M0K31V8HEwgPT+S+DhY6b7FfjM9w6Q # H/hmrYoApdLPja38Zha4wj4XF6X8o5lSWtFtUCaLoaPPux7FAtzFxWiuzGPpNX+Z # 7+rLxivVsZrPx2iWm2TRIm4E2qHcA+QhcSkmuGA4Fywgjl1BGlAiiE+QTS/QEtyF # G199pcZsgkVE5kqc4wz0LYomwmU6kkaItwMJHhnBMQG16OJFg9tRuJdZaoqHRtUs # OXIMaR/ecGq8F3B6BAmBP9nUet6F7668DIAOmE0AdFgVHQOcIN8+uCCjSn23uu42 # yYn7rPruF39wyyFY9t/CbEflg6ZUTKjs+yuR8ukzU4JYbu8wXOxJ9kwV7l5uPJ/E # rBFm88UY8QT+XfCx2obN4d3UMetcRcluZkY0EBKoJqTDurhvRQwVu02LWzY22pny # a0FI+yvJBm6rP2TO9YJQonXSBizbQaa+JjWqb/GO6p3ZMn40uoQxpiozVD/ovOKO # j9z3B+XxVY8= # =vuhL # -----END PGP SIGNATURE----- # gpg: Signature made Sun 04 Dec 2022 02:04:43 EST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2022-12-04' of https://gitlab.com/thuth/qemu: hw/display/next-fb: Fix comment typo target/s390x/tcg: Fix and improve the SACF instruction tests/qtest/migration-test: Fix unlink error and memory leaks Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-12-04Merge tag 'pull-loongarch-20221202' of https://gitlab.com/gaosong/qemu into ↵Stefan Hajnoczi
staging pull for 7.2-rc4 # -----BEGIN PGP SIGNATURE----- # # iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY4nPggAKCRBAov/yOSY+ # 36cRA/9JFWuDT0TDhu0g1x0ktvpV+1GBPzkEXR2CVhDf2bly1ka2cLEtPUpiSE8E # Osw9cEBR3qX+LyO3gA0GySUr9jsc/yRqD38OL8HGZTCmZ/qCnHJSXvy+6a0LWYQq # ZIrFat7UjiTTeErkSQ6C4bUIl6YoUUSP0X2XxO6YF5j4uhGyqA== # =sVrx # -----END PGP SIGNATURE----- # gpg: Signature made Fri 02 Dec 2022 05:12:18 EST # gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF # gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF * tag 'pull-loongarch-20221202' of https://gitlab.com/gaosong/qemu: hw/loongarch/virt: Add cfi01 pflash device Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-12-04Merge tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme into ↵Stefan Hajnoczi
staging hw/nvme fixes * fixes for aio cancellation in commands that may issue several aios # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmOI2uQACgkQTeGvMW1P # Dem6nQgAi8Dm0vhRLoEHqT6FG+VBy0Evpw2QThGE8PxsfzJ1nlwXt6s/NwEc10Uc # d5exp6AR9p37dGJfH82y8EYdEgMeJfsKQRDVMUR4n7eEOW+/Sp4WicO7iamEIWhr # CgRBw1aqU7Im0CHn+3nXu0LKXEtT+tOQrfnr255ELzCxKPZuP3Iw/+nzLQij1G4N # 9D9FPPyec+blz+0HuRg12m1ri6TAb2k9CuODuZrqLDCW8Hnl1MVmmYGZrYBy9sPr # Q2zohAjad6R5/+4BCAlusbQ0deoXYKOJdb8J2A9EN73maSqjsHQAagfs+kKxAQK4 # ttiy/M/l5EGJG496rZfUJZCnVlOllQ== # =Blzi # -----END PGP SIGNATURE----- # gpg: Signature made Thu 01 Dec 2022 11:48:36 EST # gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9 # gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown] # gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838 # Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9 * tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme: hw/nvme: remove copy bh scheduling hw/nvme: fix aio cancel in dsm hw/nvme: fix aio cancel in zone reset hw/nvme: fix aio cancel in flush hw/nvme: fix aio cancel in format Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-12-04Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi
into staging virtio: regression fix Fixes regression with migration and vsock, as fixing that exposes some known issues in vhost user cleanup, this attempts to fix those as well. More work on vhost user is needed :) Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3 # 4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn # icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn # Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ # eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh # Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0= # =ZkaX # -----END PGP SIGNATURE----- # gpg: Signature made Thu 01 Dec 2022 02:37:05 EST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: include/hw: VM state takes precedence in virtio_device_should_start hw/virtio: generalise CHR_EVENT_CLOSED handling hw/virtio: add started_vu status field to vhost-user-gpio vhost: enable vrings in vhost_dev_start() for vhost-user devices tests/qtests: override "force-legacy" for gpio virtio-mmio tests Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-12-03hw/display/next-fb: Fix comment typoEvgeny Ermakov
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com> Message-Id: <20221125160849.23711-1-evgeny.v.ermakov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-02hw/loongarch/virt: Add cfi01 pflash deviceXiaojuan Yang
Add cfi01 pflash device for LoongArch virt machine Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221130100647.398565-1-yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2022-12-01hw/nvme: remove copy bh schedulingKlaus Jensen
Fix a potential use-after-free by removing the bottom half and enqueuing the completion directly. Fixes: 796d20681d9b ("hw/nvme: reimplement the copy command to allow aio cancellation") Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-12-01hw/nvme: fix aio cancel in dsmKlaus Jensen
When the DSM operation is cancelled asynchronously, we set iocb->ret to -ECANCELED. However, the callback function only checks the return value of the completed aio, which may have completed succesfully prior to the cancellation and thus the callback ends up continuing the dsm operation instead of bailing out. Fix this. Secondly, fix a potential use-after-free by removing the bottom half and enqueuing the completion directly. Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation") Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-12-01hw/nvme: fix aio cancel in zone resetKlaus Jensen
If the zone reset operation is cancelled but the block unmap operation completes normally, the callback will continue resetting the next zone since it neglects to check iocb->ret which will have been set to -ECANCELED. Make sure that this is checked and bail out if an error is present. Secondly, fix a potential use-after-free by removing the bottom half and enqueuing the completion directly. Fixes: 63d96e4ffd71 ("hw/nvme: reimplement zone reset to allow cancellation") Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-12-01hw/nvme: fix aio cancel in flushKlaus Jensen
Make sure that iocb->aiocb is NULL'ed when cancelling. Fix a potential use-after-free by removing the bottom half and enqueuing the completion directly. Fixes: 38f4ac65ac88 ("hw/nvme: reimplement flush to allow cancellation") Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-12-01hw/nvme: fix aio cancel in formatKlaus Jensen
There are several bugs in the async cancel code for the Format command. Firstly, cancelling a format operation neglects to set iocb->ret as well as clearing the iocb->aiocb after cancelling the underlying aiocb which causes the aio callback to ignore the cancellation. Trivial fix. Secondly, and worse, because the request is queued up for posting to the CQ in a bottom half, if the cancellation is due to the submission queue being deleted (which calls blk_aio_cancel), the req structure is deallocated in nvme_del_sq prior to the bottom half being schedulued. Fix this by simply removing the bottom half, there is no reason to defer it anyway. Fixes: 3bcf26d3d619 ("hw/nvme: reimplement format nvm to allow cancellation") Reported-by: Jonathan Derrick <jonathan.derrick@linux.dev> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2022-12-01hw/virtio: generalise CHR_EVENT_CLOSED handlingAlex Bennée
..and use for both virtio-user-blk and virtio-user-gpio. This avoids the circular close by deferring shutdown due to disconnection until a later point. virtio-user-blk already had this mechanism in place so generalise it as a vhost-user helper function and use for both blk and gpio devices. While we are at it we also fix up vhost-user-gpio to re-establish the event handler after close down so we can reconnect later. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-01hw/virtio: add started_vu status field to vhost-user-gpioAlex Bennée
As per the fix to vhost-user-blk in f5b22d06fb (vhost: recheck dev state in the vhost_migration_log routine) we really should track the connection and starting separately. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221130112439.2527228-4-alex.bennee@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 00:00:00 +0000