aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2020-06-22Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200619-3' into staging This is a range of patches for RISC-V. Some key points are: - Generalise the CPU init functions - Support the SiFive revB machine - Improvements to the Hypervisor implementation and error checking - Connect some OpenTitan devices - Changes to the sifive_u machine to support U-boot v2: - Fix missing realise assert # gpg: Signature made Fri 19 Jun 2020 17:34:34 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200619-3: (32 commits) hw/riscv: sifive_u: Add a dummy DDR memory controller device hw/riscv: sifive_u: Sort the SoC memmap table entries hw/riscv: sifive_u: Support different boot source per MSEL pin state hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004 target/riscv: Rename IBEX CPU init routine hw/riscv: sifive_u: Add a new property msel for MSEL pin state hw/riscv: sifive_u: Rename serial property get/set functions to a generic name hw/riscv: sifive_u: Add reset functionality hw/riscv: sifive_gpio: Do not blindly trigger output IRQs hw/riscv: sifive_u: Hook a GPIO controller hw/riscv: sifive_gpio: Add a new 'ngpio' property hw/riscv: sifive_gpio: Clean up the codes hw/riscv: sifive_u: Generate device tree node for OTP hw/riscv: sifive_u: Simplify the GEM IRQ connect code a little bit hw/riscv: opentitan: Remove the riscv_ prefix of the machine* and soc* functions hw/riscv: sifive_e: Remove the riscv_ prefix of the machine* and soc* functions target/riscv: Use a smaller guess size for no-MMU PMP riscv/opentitan: Connect the UART device riscv/opentitan: Connect the PLIC device hw/intc: Initial commit of lowRISC Ibex PLIC ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-19Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/audio-20200619-pull-request' into staging audio: bugfixes for jack backend and gus emulation. # gpg: Signature made Fri 19 Jun 2020 14:17:22 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20200619-pull-request: hw/audio/gus: Fix registers 32-bit access audio/jack: simplify the re-init code path audio/jack: honour the enable state of the audio device audio/jack: do not remove ports when finishing audio/jack: remove invalid set of input support bool audio/jack: remove unused stopped state audio/jack: fix invalid minimum buffer size check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-19hw/riscv: sifive_u: Add a dummy DDR memory controller deviceBin Meng
It is enough to simply map the SiFive FU540 DDR memory controller into the MMIO space using create_unimplemented_device(), to make the upstream U-Boot v2020.07 DDR memory initialization codes happy. Note we do not generate device tree fragment for the DDR memory controller. Since the controller data in device tree consumes a very large space (see fu540-hifive-unleashed-a00-ddr.dtsi in the U-Boot source), and it is only needed by U-Boot SPL but not any operating system, we choose not to generate the fragment here. This also means when testing with U-Boot SPL, the device tree has to come from U-Boot SPL itself, but not the one generated by QEMU on the fly. The memory has to be set to 8GiB to match the real HiFive Unleashed board when invoking QEMU (-m 8G). With this commit, QEMU can boot U-Boot SPL built for SiFive FU540 all the way up to loading U-Boot proper from MMC: $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800) Trying to boot from MMC1 Unhandled exception: Load access fault EPC: 0000000008009be6 TVAL: 0000000010050014 The above exception is expected because QSPI is unsupported yet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Sort the SoC memmap table entriesBin Meng
Move the flash and DRAM to the end of the SoC memmap table. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-5-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Support different boot source per MSEL pin stateBin Meng
SiFive FU540 SoC supports booting from several sources, which are controlled using the Mode Select (MSEL[3:0]) pins on the chip. Typically, the boot process runs through several stages before it begins execution of user-provided programs. The SoC supports booting from memory-mapped QSPI flash, which is how start_in_flash property is used for at present. This matches MSEL = 1 configuration (QSPI0). Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL). It's not necessary for QEMU to implement the full ZSBL ROM codes, because we know ZSBL downloads the next stage program into the L2 LIM at address 0x8000000 and executes from there. We can bypass the whole ZSBL execution and use "-bios" to load the next stage program directly if MSEL indicates a ZSBL booting flow. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004Bin Meng
Per the SiFive manual, all E/U series CPU cores' reset vector is at 0x1004. Update our codes to match the hardware. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-3-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Add a new property msel for MSEL pin stateBin Meng
On SiFive FU540 SoC, the value stored at physical address 0x1000 stores the MSEL pin state that is used to control the next boot location that ROM codes jump to. Add a new property msel to sifive_u machine for this. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-12-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Rename serial property get/set functions to a generic nameBin Meng
In prepration to add more properties to this machine, rename the existing serial property get/set functions to a generic name. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-11-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Add reset functionalityBin Meng
The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Do not blindly trigger output IRQsBin Meng
At present the GPIO output IRQs are triggered each time any GPIO register is written. However this is not correct. We should only trigger the output IRQ when the pin is configured as output enable. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-9-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Hook a GPIO controllerBin Meng
SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Add a new 'ngpio' propertyBin Meng
Add a new property to represent the number of GPIO pins supported by the GPIO controller. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-7-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Clean up the codesBin Meng
Do various minor clean-ups to the exisiting codes for: - coding convention conformance - remove unnecessary blank lines - spell SiFive correctly Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Generate device tree node for OTPBin Meng
Upstream U-Boot v2020.07 codes switch to access SiFive FU540 OTP based on device tree information. Let's generate the device tree node for OTP. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-5-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Simplify the GEM IRQ connect code a little bitBin Meng
There is no need to retrieve all PLIC IRQ information in order to just connect the GEM IRQ. Use qdev_get_gpio_in() directly like what is done for other peripherals. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: opentitan: Remove the riscv_ prefix of the machine* and soc* functionsBin Meng
This was done in the virt & sifive_u codes, but opentitan codes were missed. Remove the riscv_ prefix of the machine* and soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-3-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_e: Remove the riscv_ prefix of the machine* and soc* functionsBin Meng
This was done in the virt & sifive_u codes, but sifive_e codes were missed. Remove the riscv_ prefix of the machine* and soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-2-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19riscv/opentitan: Connect the UART deviceAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-19riscv/opentitan: Connect the PLIC deviceAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-19hw/intc: Initial commit of lowRISC Ibex PLICAlistair Francis
The Ibex core contains a PLIC that although similar to the RISC-V spec is not RISC-V spec compliant. This patch implements a Ibex PLIC in a somewhat generic way. As the current RISC-V PLIC needs tidying up, my hope is that as the Ibex PLIC move towards spec compliance this PLIC implementation can be updated until it can replace the current PLIC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-19hw/char: Initial commit of Ibex UARTAlistair Francis
This is the initial commit of the Ibex UART device. Serial TX is working, while RX has been implemeneted but untested. This is based on the documentation from: https://docs.opentitan.org/hw/ip/uart/doc/ Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
2020-06-19riscv/opentitan: Fix the ROM sizeAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reported-by: Damien Hedde <damien.hedde@greensocs.com>
2020-06-19sifive_e: Support the revB machineAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200618' into stagingPeter Maydell
s390x update: - update Linux headers to 5.8-rc1 (for vfio-ccw path handling) - vfio-ccw: add support for path handling - documentation fix # gpg: Signature made Thu 18 Jun 2020 16:36:04 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [marginal] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [marginal] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20200618: docs/s390x: fix vfio-ap device_del description vfio-ccw: Add support for the CRW region and IRQ s390x/css: Refactor the css_queue_crw() routine vfio-ccw: Refactor ccw irq handler vfio-ccw: Add support for the schib region vfio-ccw: Refactor cleanup of regions Linux headers: update Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-19hw/audio/gus: Fix registers 32-bit accessAllan Peramaki
Fix audio on software that accesses DRAM above 64k via register peek/poke and some cases when more than 16 voices are used. Cc: qemu-stable@nongnu.org Fixes: 135f5ae1974c ("audio: GUSsample is int16_t") Signed-off-by: Allan Peramaki <aperamak@pp1.inet.fi> Tested-by: Volker Rümelin <vr_qemu@t-online.de> Reviewed-by: Volker Rümelin <vr_qemu@t-online.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200618103623.6031-1-philmd@redhat.com Message-Id: <20200615201757.16868-1-aperamak@pp1.inet.fi> [PMD: Removed unrelated style changes] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-18Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Thu 18 Jun 2020 14:16:22 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: (33 commits) net: Drop the NetLegacy structure, always use Netdev instead net: Drop the legacy "name" parameter from the -net option hw/net/e1000e: Do not abort() on invalid PSRCTL register value colo-compare: Fix memory leak in packet_enqueue() net/colo-compare.c: Correct ordering in complete and finalize net/colo-compare.c: Check that colo-compare is active net/colo-compare.c: Only hexdump packets if tracing is enabled net/colo-compare.c: Fix deadlock in compare_chr_send chardev/char.c: Use qemu_co_sleep_ns if in coroutine net/colo-compare.c: Create event_bh with the right AioContext net: use peer when purging queue in qemu_flush_or_purge_queue_packets() net: cadence_gem: Fix RX address filtering net: cadence_gem: TX_LAST bit should be set by guest net: cadence_gem: Update the reset value for interrupt mask register net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg net: cadence_gem: Add support for jumbo frames net: cadence_gem: Fix up code style net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState net: cadence_gem: Set ISR according to queue in use net: cadence_gem: Define access permission for interrupt registers ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-18hw/net/e1000e: Do not abort() on invalid PSRCTL register valuePhilippe Mathieu-Daudé
libFuzzer found using 'qemu-system-i386 -M q35': qemu: hardware error: e1000e: PSRCTL.BSIZE0 cannot be zero CPU #0: EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000663 ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000 EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0000 00000000 0000ffff 00009300 CS =f000 ffff0000 0000ffff 00009b00 SS =0000 00000000 0000ffff 00009300 DS =0000 00000000 0000ffff 00009300 FS =0000 00000000 0000ffff 00009300 GS =0000 00000000 0000ffff 00009300 LDT=0000 00000000 0000ffff 00008200 TR =0000 00000000 0000ffff 00008b00 GDT= 00000000 0000ffff IDT= 00000000 0000ffff CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000 DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000 DR6=ffff0ff0 DR7=00000400 EFER=0000000000000000 FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80 FPR0=0000000000000000 0000 FPR1=0000000000000000 0000 FPR2=0000000000000000 0000 FPR3=0000000000000000 0000 FPR4=0000000000000000 0000 FPR5=0000000000000000 0000 FPR6=0000000000000000 0000 FPR7=0000000000000000 0000 XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000 XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000 XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000 XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000 ==1988== ERROR: libFuzzer: deadly signal #6 0x7fae4d3ea894 in __GI_abort (/lib64/libc.so.6+0x22894) #7 0x563f4cc59a1d in hw_error (qemu-fuzz-i386+0xe8ca1d) #8 0x563f4d7c93f2 in e1000e_set_psrctl (qemu-fuzz-i386+0x19fc3f2) #9 0x563f4d7b798f in e1000e_core_write (qemu-fuzz-i386+0x19ea98f) #10 0x563f4d7afc46 in e1000e_mmio_write (qemu-fuzz-i386+0x19e2c46) #11 0x563f4cc9a0a7 in memory_region_write_accessor (qemu-fuzz-i386+0xecd0a7) #12 0x563f4cc99c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13) #13 0x563f4cc987b4 in memory_region_dispatch_write (qemu-fuzz-i386+0xecb7b4) It simply sent the following 2 I/O command to the e1000e PCI BAR #2 I/O region: writew 0x0100 0x0c00 # RCTL = E1000_RCTL_DTYP_MASK writeb 0x2170 0x00 # PSRCTL = 0 2813 static void 2814 e1000e_set_psrctl(E1000ECore *core, int index, uint32_t val) 2815 { 2816 if (core->mac[RCTL] & E1000_RCTL_DTYP_MASK) { 2817 2818 if ((val & E1000_PSRCTL_BSIZE0_MASK) == 0) { 2819 hw_error("e1000e: PSRCTL.BSIZE0 cannot be zero"); 2820 } Instead of calling hw_error() which abort the process (it is meant for CPU fatal error condition, not for device logging), log the invalid request with qemu_log_mask(LOG_GUEST_ERROR) and return, ignoring the request. Cc: qemu-stable@nongnu.org Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Fix RX address filteringTong Ho
Two defects are fixed: 1/ Detection of multicast frames 2/ Treating drop of mis-addressed frames as non-error Signed-off-by: Tong Ho <tong.ho@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: TX_LAST bit should be set by guestSai Pavan Boddu
TX_LAST bit should not be set by hardware, its set by guest to inform the last bd of the frame. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Update the reset value for interrupt mask registerSai Pavan Boddu
Mask all interrupt on reset. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 regSai Pavan Boddu
Advertise support of clear-on-read for ISR registers. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Add support for jumbo framesSai Pavan Boddu
Add a property "jumbo-max-len", which sets default value of jumbo frames up to 16,383 bytes. Add Frame length checks for standard and jumbo frames. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Fix up code styleSai Pavan Boddu
Fix the code style for register definitions. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Move tx/rx packet buffert to CadenceGEMStateSai Pavan Boddu
Moving this buffers to CadenceGEMState, as their size will be increased more when JUMBO frames support is added. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Set ISR according to queue in useSai Pavan Boddu
Set ISR according to queue in use, added interrupt support for all queues. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Define access permission for interrupt registersSai Pavan Boddu
Q1 to Q7 ISR's are clear-on-read, IER/IDR registers are write-only, mask reg are read-only. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Fix irq update w.r.t queueSai Pavan Boddu
Set irq's specific to a queue, present implementation is setting q1 irq based on q0 status. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Fix the queue address update during wrap aroundSai Pavan Boddu
During wrap around and reset, queues are pointing to initial base address of queue 0, irrespective of what queue we are dealing with. Fix it by assigning proper base address every time. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18net: cadence_gem: Fix debug statementsSai Pavan Boddu
Enabling debug breaks the build, Fix them and make debug statements always compilable. Fix few statements to use sized integer casting. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18hw/net/tulip: Log descriptor overflowsPhilippe Mathieu-Daudé
Log with GUEST_ERROR what the guest is doing wrong. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18hw/net/tulip: Fix 'Descriptor Error' definitionPhilippe Mathieu-Daudé
Bit #14 is "DE" for 'Descriptor Error': When set, indicates a frame truncation caused by a frame that does not fit within the current descriptor buffers, and that the 21143 does not own the next descriptor. [Table 4-1. RDES0 Bit Fields Description] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18Fix tulip breakageHelge Deller
The tulip network driver in a qemu-system-hppa emulation is broken in the sense that bigger network packages aren't received any longer and thus even running e.g. "apt update" inside the VM fails. The breakage was introduced by commit 8ffb7265af ("check frame size and r/w data length") which added checks to prevent accesses outside of the rx/tx buffers. But the new checks were implemented wrong. The variable rx_frame_len counts backwards, from rx_frame_size down to zero, and the variable len is never bigger than rx_frame_len, so accesses just can't happen and the checks are unnecessary. On the contrary the checks now prevented bigger packages to be moved into the rx buffers. This patch reverts the wrong checks and were sucessfully tested with a qemu-system-hppa emulation. Fixes: 8ffb7265af ("check frame size and r/w data length") Buglink: https://bugs.launchpad.net/bugs/1874539 Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18virtio-net: align RSC fields with updated virtio-net headerYuri Benditovich
Removal of duplicated RSC definitions. Changing names of the fields to ones defined in the Linux header. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18virtio-net: add migration support for RSS and hash reportYuri Benditovich
Save and restore RSS/hash report configuration. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18virtio-net: reference implementation of hash reportYuri Benditovich
Suggest VIRTIO_NET_F_HASH_REPORT if specified in device parameters. If the VIRTIO_NET_F_HASH_REPORT is set, the device extends configuration space. If the feature is negotiated, the packet layout is extended to accomodate the hash information. In this case deliver packet's hash value and report type in virtio header extension. Use for configuration the same procedure as already used for RSS. We add two fields in rss_data that controls what the device does with the calculated hash if rss_data.enabled is set. If field 'populate' is set the hash is set in the packet, if field 'redirect' is set the hash is used to decide the queue to place the packet to. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18virtio-net: implement RX RSS processingYuri Benditovich
If VIRTIO_NET_F_RSS negotiated and RSS is enabled, process incoming packets, calculate packet's hash and place the packet into respective RX virtqueue. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18virtio-net: implement RSS configuration commandYuri Benditovich
Optionally report RSS feature. Handle RSS configuration command and keep RSS parameters in virtio-net device context. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - enhance handling of size-related BlockConf properties - nvme: small fixes, refactoring and cleanups - virtio-blk: On restart, process queued requests in the proper context - icount: make dma reads deterministic - iotests: Some fixes for rarely run cases - .gitignore: Ignore storage-daemon files - Minor code cleanups # gpg: Signature made Wed 17 Jun 2020 15:47:19 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (43 commits) iotests: Add copyright line in qcow2.py iotests/{190,291}: compat=0.10 is unsupported iotests/229: data_file is unsupported iotests/292: data_file is unsupported iotests/041: Skip test_small_target for qed iotests.py: Add skip_for_formats() decorator block: lift blocksize property limit to 2 MiB qdev-properties: add getter for size32 and blocksize block: make BlockConf size props 32bit and accept size suffixes qdev-properties: make blocksize accept size suffixes qdev-properties: add size32 property type qdev-properties: blocksize: use same limits in code and description block: consolidate blocksize properties consistency checks virtio-blk: store opt_io_size with correct size .gitignore: Ignore storage-daemon files hw/block/nvme: verify msix_init_exclusive_bar() return value hw/block/nvme: add msix_qsize parameter hw/block/nvme: Verify msix_vector_use() returned value hw/block/nvme: factor out controller identify setup hw/block/nvme: do cmb/pmr init as part of pci init ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-18Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/microvm-20200617-pull-request' into staging microvm: memory config tweaks # gpg: Signature made Wed 17 Jun 2020 13:28:44 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/microvm-20200617-pull-request: microvm: move virtio base to 0xfeb00000 x86: move max-ram-below-4g to pc microvm: drop max-ram-below-4g support microvm: use 3G split unconditionally Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-18vfio-ccw: Add support for the CRW region and IRQFarhan Ali
The crw region can be used to obtain information about Channel Report Words (CRW) from vfio-ccw driver. Currently only channel-path related CRWs are passed to QEMU from vfio-ccw driver. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505125757.98209-7-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-24 06:21:34 +0000