| Age | Commit message (Collapse) | Author |
|---|
|
I noticed i2c rx transfers were getting shortened to "1" on Zephyr. It
seems to be because the Zephyr i2c driver sets the RX DMA len with the
RX field write-enable bit set (bit 31) to avoid a read-modify-write. [1]
/* 0x1C : I2CM Master DMA Transfer Length Register */
I think we should be checking the write-enable bits on the incoming
value, not checking the register array. I'm not sure we're even writing
the write-enable bits to the register array, actually.
[1] https://github.com/AspeedTech-BMC/zephyr/blob/db3dbcc9c52e67a47180890ac938ed380b33f91c/drivers/i2c/i2c_aspeed.c#L145-L148
Fixes: ba2cccd64e90f34 ("aspeed: i2c: Add new mode support")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-3-me@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Very minor, doesn't effect functionality, but this is supposed to be
R_I2CC_FUN_CTRL (new-mode, not old-mode).
Fixes: ba2cccd64e9 ("aspeed: i2c: Add new mode support")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-2-me@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Add 2-level cascaded I2C MUXes for SOC VR channels into the Firework
machine.
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-8-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Add Thermal Diodes for Firework machine.
Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-7-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Add MAX31785 fan controllers in machines so that the Linux driver
populates the sysfs interface.
Firework has two MAX31785 Fan controllers at 0x52, and 0x54 on bus 9.
Witherspoon has one at 0x52 on bus 3.
Rainier has one at 0x52 on bus 7.
Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-6-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
MAX31785 is a PMBus compliant 6-Channel fan controller. It supports 6 fan
channels, 11 temperature sensors, and 6-Channel ADC to measure the remote
voltages. Datasheet can be found here:
https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
This initial version of the driver has skeleton and support for the
fan channels. Requests for temperature sensors, and ADC Channels the
are serviced with the default values as per the datasheet. No additional
instrumentation is done. NV Log feature is not supported.
Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-5-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Current implementation of the pmbus core driver treats the read request
for page 255 as invalid request and sets the invalid command bit (bit 7)
in the STATUS_CML register. As per the PMBus specification it is a valid
request.
Refer to the PMBus specification, revision 1.3.1, section 11.10 PAGE,
on the page 58:
"Setting the PAGE to FFh means that all subsequent comands are to be
applied to all outputs.
Some commands, such as READ_TEMPERATURE, may use a common sensor but
be available on all pages of a device. Such implementations are the
decision of each device manufacturer or are specified in a PMBus
Application Profile. Consult the manufacturer's documents or the
Application Profile Specification as needed."
For e.g.,
The VOUT_MODE is a valid command for page 255 for maxim 31785 device.
refer to Table 1. PMBus Command Codes on page 14 in the datasheet.
https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
Fixes: 38870253f1d1 ("hw/i2c: pmbus: fix error returns and guard against out of range accesses")
Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-4-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Add base for Qualcomm Firework BMC machine.
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-3-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Add qcom-dc-scm-v1 board support.
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-2-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-6-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-5-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
sysbus_mmio_map maps devices into "get_system_memory()".
With the new SoC memory attribute, we want to make sure that each device is
mapped into the SoC memory.
In single SoC machines, the SoC memory is the same as "get_system_memory()",
but in multi SoC machines it will be different.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-4-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Multi-SoC machines can use this property to specify a memory container
for each SoC. Single SoC machines will just specify get_system_memory().
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220624003701.1363500-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Coverity warns that "ssi_transfer(s->spi, 0U) << 8 * i" might overflow
because the expression is evaluated using 32-bit arithmetic and then
used in a context expecting a uint64_t.
Fixes: Coverity CID 1487244
Message-Id: <20220628165512.1133590-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
While the HMAC mode is not modelled, the accumulative mode is.
Accumulative mode is enabled by setting one of the bits in the HMAC
engine command mode part of the register, so fix the unimplemented check
to only look at the upper of the two bits.
Fixes: 5cd7d8564a8b ("aspeed/hace: Support AST2600 HACE")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627100816.125956-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Using a 'stop' string seems more appropriate than 'normal'.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220628154740.1117349-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220628154740.1117349-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Currently, the Aspeed machines allocate a ram container region in
which the machine ram region is mapped. See commit ad1a9782186d
("aspeed: add a RAM memory region container"). An extra region is
mapped after ram in the ram container to catch invalid access done by
FW. That's how FW determines the size of ram. See commit ebe31c0a8ef7
("aspeed: add a max_ram_size property to the memory controller").
Let's move all the logic under the SoC where it should be. It will
also ease the work on multi SoC support.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220623202123.3972977-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Signed-off-by: Iris Chen <irischenlj@gmail.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220621202427.2680413-1-irischenlj@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
https://gitlab.com/laurent_vivier/qemu into staging
trivial patches pull request 20220629
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmK8FmsSHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L7482EkP/19M/AAUkGqIdU9Dj7H46r+LEKtrT7Xu
# jNRDDrkhVQvx42mklSB+fO/ptMKUDgxvLs4mnuZFxM7SrTOb4h5jfZzyYjk73ENQ
# YZ/TLxRtxAfRCcGwso7NGyk85mwt+sBFKZXfW6qsfc9AjDphLUOblfSieeFegz69
# BUtzbMOPSMR7e54y6azJX3gCkxLytSXYgk4otSLTrL233sT7pnwPRdxKGzCTA5vs
# fRxKb4p/R05lWepcjrL2d2lB1TabsV0kqmNkHDvubVWlgyoK3Vt/1dzD1UP7CrvF
# WghlZWmxCHrmLlBb+VSDUa22kpfv5fi/feauuug+dya+s1Mlq8HZTL8VtjUJHwLL
# 92xRPeP/RfEJdoQDuMKXP9DWAAYM03HGgR37cE5NMDCyHG0XRKOJ+i2P7DQLVDjW
# QyWX6bX1WV6FovdwwMnZR9OclvKtsZnb1jlfj+G2DdKXpLliDH6DkFm8mPQTM1L7
# w53iMtK88erEc+NP6+fPbbZmySvDVUcLmcTiBceZK6Vjo4oTGNrAWP+VgjBTJaz+
# 71ulkJ6vo39ZnEQOUlWrL/yW+8sQNaeO1tO67HZZ8dgTvAnPwyvKq88jSMzGCNpz
# Wpcf4yVAEvU+fP3KkEaqQqmQeK/Vc+H6044O00tcLVICkpCdN/FwRjgfZanX9CIJ
# xQjxW5mkb1Z3
# =fgtJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Jun 2022 02:37:55 PM +0530
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [undefined]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [undefined]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* tag 'trivial-branch-for-7.1-pull-request' of https://gitlab.com/laurent_vivier/qemu:
hw/i386/xen/xen-hvm: Inline xen_piix_pci_write_config_client() and remove it
hw/i386/xen/xen-hvm: Allow for stubbing xen_set_pci_link_route()
hw/ide/atapi.c: Correct typos (CD-CDROM -> CD-ROM)
common-user: Only compile the common user code if have_user is set
hw/pci-host/i440fx: Remove unused parameter from i440fx_init()
MAINTAINERS: Add softmmu/runstate.c to "Main loop"
trivial typos: namesapce
Trivial: 3 char repeat typos
util: Return void on iova_tree_remove
qom/object: Remove circular include dependency
vga: avoid crash if no default vga card
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
xen_piix_pci_write_config_client() is implemented in the xen sub tree and
uses PIIX constants internally, thus creating a direct dependency on
PIIX. Now that xen_set_pci_link_route() is stubbable, the logic of
xen_piix_pci_write_config_client() can be moved to PIIX which resolves
the dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-3-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
The only user of xen_set_pci_link_route() is
xen_piix_pci_write_config_client() which implements PIIX-specific logic in
the xen namespace. This makes xen-hvm depend on PIIX which could be
avoided if xen_piix_pci_write_config_client() was implemented in PIIX. In
order to do this, xen_set_pci_link_route() needs to be stubbable which
this patch addresses.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-2-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220528204702.167912-1-lkujaw@member.fsf.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
pi440fx_state is an out-parameter which is never read by the caller.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220612192800.40813-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
'namespace' is misspelled in a bunch of places.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-3-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
into staging
virtio: fixes
fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmK6NQoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp/sQIAJGiYliUHElJapM/4KSsXKWCFtk9B8wJuUie
# yeMKOdD6QSk9tk/HkYSCnMB7G6Fe+MtoE+sPm/6l5nOFqvqVVJw9vOKteWHSpQ0E
# 9CgbR7s7K1MoLG9J613iB2OtAfhPrWEvSOJ6mvTAxGgxhCQw6UzC88cYfBHJ/efn
# GAhVlriSfSCRANmivjY+g4h4JFWWSMTH6m9u4wKBJF8GRkNgN+C50Z+bp8aE7wRT
# KiMoaaYUDOjxzD+8nGYggg/t+UIM7jG2t8M5BMbC0NMP+ovVZeesWK6ZOzoda2tI
# ZONV0dLikLCicyOvfMH6YDqzGtchCDmS0hpfuorhlzsntm42RBM=
# =T+gr
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Jun 2022 04:24:02 AM +0530
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
include/hw/virtio: document vhost_ack_features
include/hw/virtio: document vhost_get_features
contrib/vhost-user-blk: fix 32 bit build and enable
MAINTAINERS: Collect memory device files in "Memory devices"
libvhost-user: Fix VHOST_USER_ADD_MEM_REG reply
libvhost-user: Fix VHOST_USER_GET_MAX_MEM_SLOTS reply
docs/vhost-user: Fix mismerge
virtio-iommu: Fix migration regression
vhost: setup error eventfd and dump errors
vhost: add method vhost_set_vring_err
msi: fix MSI vector limit check in msi_set_mask()
virtio-iommu: Fix the partial copy of probe request
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We also need to switch to the right address space on dest side
after loading the device status. DMA to wrong address space is
destructive.
Fixes: 3facd774962fd ("virtio-iommu: Add bypass mode support to assigned device")
Suggested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220624093740.3525267-1-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
|
|
Vhost has error notifications, let's log them like other errors.
For each virt-queue setup eventfd for vring error notifications.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[vsementsov: rename patch, change commit message and dump error like
other errors in the file]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220623161325.18813-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
|
|
Kernel and user vhost may report virtqueue errors via eventfd.
This is only reliable way to get notification about protocol error.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Message-Id: <20220623161325.18813-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
|
|
MSI supports a maximum of PCI_MSI_VECTORS_MAX vectors - from 0 to
PCI_MSI_VECTORS_MAX - 1.
msi_set_mask() was previously using PCI_MSI_VECTORS_MAX as the upper
limit for MSI vectors. Fix the upper limit to PCI_MSI_VECTORS_MAX - 1.
Fixes: Coverity CID 1490141
Fixes: 08cf3dc61199 vfio-user: handle device interrupts
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Message-Id: <20220623153844.7367-1-jag.raman@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The structure of probe request doesn't include the tail, this leads
to a few field missed to be copied. Currently this isn't an issue as
those missed field belong to reserved field, just in case reserved
field will be used in the future.
Changed 4th parameter of virtio_iommu_iov_to_req() to receive size
of device-readable part.
Fixes: 1733eebb9e75b ("virtio-iommu: Implement RESV_MEM probe request")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220623023152.3473231-1-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
|
|
Move the code from hw/arm/virt.c that is supposed
to handle v7 into the one function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This fixes the output of "info qom-tree" so that the buffers appear as children
of the artist device, rather than underneath the "unattached" container.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624160839.886649-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Helge Deller <deller@gmx.de>
|
|
Now that all the PS2 devices have been converted to use GPIOs the update_irq()
callback function and the update_arg parameter can be removed.
This allows these arguments to be completely removed from ps2_kbd_init() and
ps2_mouse_init(), along with the transitional logic that was added to
ps2_raise_irq() and ps2_lower_irq().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-55-mark.cave-ayland@ilande.co.uk>
|
|
Define a new qdev input gpio for handling incoming PS2 IRQs, and then wire up the
PS2 keyboard and mouse devices to use it. At the same time set update_irq() and
update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any
accidental attempt to use the legacy update_irq() function will cause a NULL
pointer dereference.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-53-mark.cave-ayland@ilande.co.uk>
|
|
This means that it is no longer necessary to call qemu_register_reset() manually
within i8042_realizefn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-52-mark.cave-ayland@ilande.co.uk>
|
|
Define a new qdev input gpio for handling incoming PS2 IRQs, and then wire up the
PS2 keyboard and mouse devices to use it. At the same time set update_irq() and
update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any
accidental attempt to use the legacy update_irq() function will cause a NULL
pointer dereference.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-50-mark.cave-ayland@ilande.co.uk>
|
|
Add a qdev gpio input in lasips2_init() by taking the existing lasips2_port_set_irq()
function, updating it accordingly and then renaming to lasips2_set_irq(). Use these
new qdev gpio inputs to wire up the PS2 keyboard and mouse devices.
At the same time set update_irq() and update_arg to NULL in ps2_kbd_init() and
ps2_mouse_init() to ensure that any accidental attempt to use the legacy update_irq()
function will cause a NULL pointer dereference.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-48-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This enables the IRQ to be wired up using sysbus_connect_irq() in
lasips2_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-47-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Move ps2_kbd_init() and ps2_mouse_init() from lasips2_initfn() to lasips2_realize.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-46-mark.cave-ayland@ilande.co.uk>
|
|
This is in preparation for handling vmstate_register() within the device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-45-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This can be improved once the ps2_kbd_init() and ps2_mouse_init() functions have
been removed, but for now move the existing logic from lasi_initfn() to
lasi_init(). At the same time explicitly set keyboard port id to 0, even if it
isn't technically required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-44-mark.cave-ayland@ilande.co.uk>
|
|
Now that the register memory regions are exposed as SysBus memory regions, move
the mapping of the LASIPS2 registers from lasips2_initfn() to the HPPA machine
(which is its only user).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-43-mark.cave-ayland@ilande.co.uk>
|
|
Move the initialisation of the keyboard and mouse memory regions to lasips2_init()
and expose them as SysBus memory regions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-42-mark.cave-ayland@ilande.co.uk>
|
|
the LASIPS2 device
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy LASIPS2
wrapper function. Eventually the wrapper function will be removed, but for now
rename it to lasips2_initfn() to avoid a naming collision.
At the same time update lasips2_initfn() return the LASIPS2 device so that it
can later be accessed using qdev APIs by the HPPA machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-41-mark.cave-ayland@ilande.co.uk>
|
|
This allows the QOM types in lasips2.c to be used elsewhere by simply including
lasips2.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-40-mark.cave-ayland@ilande.co.uk>
|
|
Currently lasip2_init() creates a new LASIPS2State directly which is used by the HPPA
machine. Introduce a new LASIPS2 QOM type that will soon be used to allow the HPPA
machine to be wired up using standard qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-39-mark.cave-ayland@ilande.co.uk>
|
|
This describes the PL050 device interface implemented within QEMU.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-38-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
