| Age | Commit message (Collapse) | Author |
|---|
|
With VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, we signal the VM that reading
unplugged memory is not supported. We have to fail feature negotiation
in case the guest does not support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE.
First, VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE is required to properly handle
memory backends (or architectures) without support for the shared zeropage
in the hypervisor cleanly. Without the shared zeropage, even reading an
unpopulated virtual memory location can populate real memory and
consequently consume memory in the hypervisor. We have a guaranteed shared
zeropage only on MAP_PRIVATE anonymous memory.
Second, we want VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE to be the default
long-term as even populating the shared zeropage can be problematic: for
example, without THP support (possible) or without support for the shared
huge zeropage with THP (unlikely), the PTE page tables to hold the shared
zeropage entries can consume quite some memory that cannot be reclaimed
easily.
Third, there are other optimizations+features (e.g., protection of
unplugged memory, reducing the total memory slot size and bitmap sizes)
that will require VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE.
We really only support x86 targets with virtio-mem for now (and
Linux similarly only support x86), but that might change soon, so prepare
for different targets already.
Add a new "unplugged-inaccessible" tristate property for x86 targets:
- "off" will keep VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE unset and legacy
guests working.
- "on" will set VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE and stop legacy guests
from using the device.
- "auto" selects the default based on support for the shared zeropage.
Warn in case the property is set to "off" and we don't have support for the
shared zeropage.
For existing compat machines, the property will default to "off", to
not change the behavior but eventually warn about a problematic setup.
Short-term, we'll set the property default to "auto" for new QEMU machines.
Mid-term, we'll set the property default to "on" for new QEMU machines.
Long-term, we'll deprecate the parameter and disallow legacy
guests completely.
The property has to match on the migration source and destination. "auto"
will result in the same VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE setting as long
as the qemu command line (esp. memdev) match -- so "auto" is good enough
for migration purposes and the parameter doesn't have to be migrated
explicitly.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134039.29670-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Packed Virtqueues wrap used_idx instead of letting it run freely like
Split Virtqueues do. If the used ring wraps more than once there is no
way to compare vq->signalled_used and vq->used_idx in
virtio_packed_should_notify() since they are modulo vq->vring.num.
This causes the device to stop sending used buffer notifications when
when virtio_packed_should_notify() is called less than once each time
around the used ring.
It is possible to trigger this with virtio-blk's dataplane
notify_guest_bh() irq coalescing optimization. The call to
virtio_notify_irqfd() (and virtio_packed_should_notify()) is deferred to
a BH. If the guest driver is polling it can complete and submit more
requests before the BH executes, causing the used ring to wrap more than
once. The result is that the virtio-blk device ceases to raise
interrupts and I/O hangs.
Cc: Tiwei Bie <tiwei.bie@intel.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211130134510.267382-1-stefanha@redhat.com>
Fixes: 86044b24e865fb9596ed77a4d0f3af8b90a088a1 ("virtio: basic packed virtqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For scarce memory resources, such as hugetlb, we want to be able to
prealloc such memory resources in order to not crash later on access. On
simple user errors we could otherwise easily run out of memory resources
an crash the VM -- pretty much undesired.
For ordinary memory devices, such as DIMMs, we preallocate memory via the
memory backend for such use cases; however, with virtio-mem we're dealing
with sparse memory backends; preallocating the whole memory backend
destroys the whole purpose of virtio-mem.
Instead, we want to preallocate memory when actually exposing memory to the
VM dynamically, and fail plugging memory gracefully + warn the user in case
preallocation fails.
A common use case for hugetlb will be using "reserve=off,prealloc=off" for
the memory backend and "prealloc=on" for the virtio-mem device. This
way, no huge pages will be reserved for the process, but we can recover
if there are no actual huge pages when plugging memory. Libvirt is
already prepared for this.
Note that preallocation cannot protect from the OOM killer -- which
holds true for any kind of preallocation in QEMU. It's primarily useful
only for scarce memory resources such as hugetlb, or shared file-backed
memory. It's of little use for ordinary anonymous memory that can be
swapped, KSM merged, ... but we won't forbid it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134611.31172-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add the four lm75s behind the mux on bus 13.
Tested by booting the firmware:
lm75 42-0048: hwmon0: sensor 'lm75'
lm75 43-0049: supply vs not found, using dummy regulator
lm75 43-0049: hwmon1: sensor 'lm75'
lm75 44-0048: supply vs not found, using dummy regulator
lm75 44-0048: hwmon2: sensor 'lm75'
lm75 45-0049: supply vs not found, using dummy regulator
lm75 45-0049: hwmon3: sensor 'lm75'
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220102215844.2888833-5-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220102215844.2888833-4-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Shengtan Mao <stmao@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Chris Rauer <crauer@google.com>
Message-id: 20220102215844.2888833-3-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Chris Rauer <crauer@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220102215844.2888833-2-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In several places we have a local variable max_l2_entries which is
the number of entries which will fit in a level 2 table. The
calculations done on this value are correct; rename it to
num_l2_entries to fit the convention we're using in this code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The ITS code has to check whether various parameters passed in
commands are in-bounds, where the limit is defined in terms of the
number of bits that are available for the parameter. (For example,
the GITS_TYPER.Devbits ID register field specifies the number of
DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD
command packets must fit in that many bits.)
Currently we have off-by-one bugs in many of these bounds checks.
The typical problem is that we define a max_foo as 1 << n. In
the Devbits example, we set
s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1).
However later when we do the bounds check we write
if (devid > s->dt.max_ids) { /* command error */ }
which incorrectly permits a devid of 1 << n.
These bugs will not cause QEMU crashes because the ID values being
checked are only used for accesses into tables held in guest memory
which we access with address_space_*() functions, but they are
incorrect behaviour of our emulation.
Fix them by standardizing on this pattern:
* bounds limits are named num_foos and are the 2^n value
(equal to the number of valid foo values)
* bounds checks are either
if (fooid < num_foos) { good }
or
if (fooid >= num_foos) { bad }
In this commit we fix the handling of the number of IDs
in the device table and the collection table, and the number
of commands that will fit in the command queue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Use FIELD macros to handle CTEs, rather than ad-hoc mask-and-shift.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The comment says that in our CTE format the RDBase field is 36 bits;
in fact for us it is only 16 bits, because we use the RDBase format
where it specifies a 16-bit CPU number. The code already uses
RDBASE_PROCNUM_LENGTH (16) as the field width, so fix the comment
to match it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Currently the ITS code that reads and writes DTEs uses open-coded
shift-and-mask to assemble the various fields into the 64-bit DTE
word. The names of the macros used for mask and shift values are
also somewhat inconsistent, and don't follow our usual convention
that a MASK macro should specify the bits in their place in the word.
Replace all these with use of the FIELD macro.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The MAPI command takes arguments DeviceID, EventID, ICID, and is
defined to be equivalent to MAPTI DeviceID, EventID, EventID, ICID.
(That is, where MAPTI takes an explicit pINTID, MAPI uses the EventID
as the pINTID.)
We didn't quite get this right. In particular the error checks for
MAPI include "EventID does not specify a valid LPI identifier", which
is the same as MAPTI's error check for the pINTID field. QEMU's code
skips the pINTID error check entirely in the MAPI case.
We can fix this bug and in the process simplify the code by switching
to the obvious implementation of setting pIntid = eventid early
if ignore_pInt is true.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The GITS_TYPE_PHYSICAL define is the value we set the
GITS_TYPER.Physical field to -- this is 1 to indicate that we support
physical LPIs. (Support for virtual LPIs is the GITS_TYPER.Virtual
field.) We also use this define as the *value* that we write into an
interrupt translation table entry's INTTYPE field, which should be 1
for a physical interrupt and 0 for a virtual interrupt. Finally, we
use it as a *mask* when we read the interrupt translation table entry
INTTYPE field.
Untangle this confusion: define an ITE_INTTYPE_VIRTUAL and
ITE_INTTYPE_PHYSICAL to be the valid values of the ITE INTTYPE
field, and replace the ad-hoc collection of ITE_ENTRY_* defines with
use of the FIELD() macro to define the fields of an ITE and the
FIELD_EX64() and FIELD_DP64() macros to read and write them.
We use ITE in the new setup, rather than ITE_ENTRY, because
ITE stands for "Interrupt translation entry" and so the extra
"entry" would be redundant.
We take the opportunity to correct the name of the field that holds
the GICv4 'doorbell' interrupt ID (this is always the value 1023 in a
GICv3, which is why we were calling it the 'spurious' field).
The GITS_TYPE_PHYSICAL define is then used in only one place, where
we set the initial GITS_TYPER value. Since GITS_TYPER.Physical is
essentially a boolean, hiding the '1' value behind a macro is more
confusing than helpful, so expand out the macro there and remove the
define entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We set the TableDesc entry_sz field from the appropriate
GITS_BASER.ENTRYSIZE field. That ID register field specifies the
number of bytes per table entry minus one. However when we use
td->entry_sz we assume it to be the number of bytes per table entry
(for instance we calculate the number of entries in a page by
dividing the page size by the entry size).
The effects of this bug are:
* we miscalculate the maximum number of entries in the table,
so our checks on guest index values are wrong (too lax)
* when looking up an entry in the second level of an indirect
table, we calculate an incorrect index into the L2 table.
Because we make the same incorrect calculation on both
reads and writes of the L2 table, the guest won't notice
unless it's unlucky enough to use an index value that
causes us to index off the end of the L2 table page and
cause guest memory corruption in whatever follows
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The extract_table_params() decodes the fields in the GITS_BASER<n>
registers into TableDesc structs. Since the fields are the same for
all the GITS_BASER<n> registers, there is currently a lot of code
duplication within the switch (type) statement. Refactor so that the
cases include only what is genuinely different for each type:
the calculation of the number of bits in the ID value that indexes
into the table.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
In extract_table_params() we process each GITS_BASER<n> register. If
the register's Valid bit is not set, this means there is no
in-guest-memory table and so we should not try to interpret the other
fields in the register. This was incorrectly coded as a 'return'
rather than a 'break', so instead of looping round to process the
next GITS_BASER<n> we would stop entirely, treating any later tables
as being not valid also.
This has no real guest-visible effects because (since we don't have
GITS_TYPER.HCC != 0) the guest must in any case set up all the
GITS_BASER<n> to point to valid tables, so this only happens in an
odd misbehaving-guest corner case.
Fix the check to 'break', so that we leave the case statement and
loop back around to the next GITS_BASER<n>.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The TableDesc struct defines properties of the in-guest-memory tables
which the guest tells us about by writing to the GITS_BASER<n>
registers. This struct currently has a union 'maxids', but all the
fields of the union have the same type (uint32_t) and do the same
thing (record one-greater-than the maximum ID value that can be used
as an index into the table).
We're about to add another table type (the GICv4 vPE table); rather
than adding another specifically-named union field for that table
type with the same type as the other union fields, remove the union
entirely and just have a 'uint32_t max_ids' struct field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We currently define a bitmask for the GITS_CTLR ENABLED bit in
two ways: as ITS_CTLR_ENABLED, and via the FIELD() macro as
R_GITS_CTLR_ENABLED_MASK. Consistently use the FIELD macro version
everywhere and remove the redundant ITS_CTLR_ENABLED define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The checks in the ITS on the rdbase values in guest commands are
off-by-one: they permit the guest to pass us a value equal to
s->gicv3->num_cpu, but the valid values are 0...num_cpu-1. This
meant the guest could cause us to index off the end of the
s->gicv3->cpu[] array when calling gicv3_redist_process_lpi(), and we
would probably crash.
(This is not a security bug, because this code is only usable
with emulation, not with KVM.)
Cc: qemu-stable@nongnu.org
Fixes: 17fb5e36aabd4b ("hw/intc: GICv3 redistributor ITS processing")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
AST2600 Display Port MCU introduces 0x18000000~0x1803FFFF as it's memory
and io address. If guest machine try to access DPMCU memory, it will
cause a fatal error.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20211210083034.726610-1-troy_lee@aspeedtech.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Turn on pre-defined feature VIRTIO_BLK_F_SIZE_MAX for virtio blk device to
avoid guest DMA request sizes which are too large for hardware spec.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Message-Id: <1641202092-149677-1-git-send-email-andy.pei@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
|
|
The i440fx and Q35 machine types are both hardcoded to use the
legacy SMBIOS 2.1 (32-bit) entry point. This is a sensible
conservative choice because SeaBIOS only supports SMBIOS 2.1
EDK2, however, can also support SMBIOS 3.0 (64-bit) entry points,
and QEMU already uses this on the ARM virt machine type.
This adds a property to allow the choice of SMBIOS entry point
versions For example to opt in to 64-bit SMBIOS entry point:
$QEMU -machine q35,smbios-entry-point-type=64
Based on a patch submitted by Daniel Berrangé.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211026151100.1691925-4-ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Rename the enums to match the naming style used by QAPI, and to
use "32" and "64" instead of "20" and "31". This will allow us
to more easily move the enum to the QAPI schema later.
About the naming choice: "SMBIOS 2.1 entry point"/"SMBIOS 3.0
entry point" and "32-bit entry point"/"64-bit entry point" are
synonymous in the SMBIOS specification. However, the phrases
"32-bit entry point" and "64-bit entry point" are used more often.
The new names also avoid confusion between the entry point format
and the actual SMBIOS version reported in the entry point
structure. For example: currently the 32-bit entry point
actually report SMBIOS 2.8 support, not 2.1.
Based on portions of a patch submitted by Daniel P. Berrangé.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211026151100.1691925-2-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Skip triggering an LSI when the AER root error status is updated if no
LSI is defined for the device. We can have a root bridge with no LSI,
MSI and MSI-X defined, for example on POWER systems.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20211116170133.724751-4-fbarrat@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
|
|
Move the pci_intx() definition to the PCI header file, so that it can
be called from other PCI files. It is used by the next patch.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20211116170133.724751-3-fbarrat@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
|
|
Fix the only callsite that doesn't propagate the error code from the
generic vhost code.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-11-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
|
|
The generic vhost code expects that many of the VhostOps methods in the
respective backends set errno on errors. However, none of the existing
backends actually bothers to do so. In a number of those methods errno
from the failed call is clobbered by successful later calls to some
library functions; on a few code paths the generic vhost code then
negates and returns that errno, thus making failures look as successes
to the caller.
As a result, in certain scenarios (e.g. live migration) the device
doesn't notice the first failure and goes on through its state
transitions as if everything is ok, instead of taking recovery actions
(break and reestablish the vhost-user connection, cancel migration, etc)
before it's too late.
To fix this, consolidate on the convention to return negated errno on
failures throughout generic vhost, and use it for error propagation.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-10-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
VhostOps methods in user_ops are not very consistent in their error
returns: some return negated errno while others just -1.
Make sure all of them consistently return negated errno. This also
helps error propagation from the functions being called inside.
Besides, this synchronizes the error return convention with the other
two vhost backends, kernel and vdpa, and will therefore allow for
consistent error propagation in the generic vhost code (in a followup
patch).
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-9-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Almost all VhostOps methods in vdpa_ops follow the convention of
returning negated errno on error.
Adjust the few that don't. To that end, rework vhost_vdpa_add_status to
check if setting of the requested status bits has succeeded and return
the respective error code it hasn't, and propagate the error codes
wherever it's appropriate.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-8-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Almost all VhostOps methods in kernel_ops follow the convention of
returning negated errno on error.
Adjust the only one that doesn't.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-7-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Fix the (hypothetical) potential problem when the value parsed out of
the vhost module parameter in sysfs overflows the return value from
vhost_kernel_memslots_limit.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-6-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost-user-blk realize only attempts to reconnect if the previous
connection attempt failed on "a problem with the connection and not an
error related to the content (which would fail again the same way in the
next attempt)".
However this distinction is very subtle, and may be inadvertently broken
if the code changes somewhere deep down the stack and a new error gets
propagated up to here.
OTOH now that the number of reconnection attempts is limited it seems
harmless to try reconnecting on any error.
So relax the condition of whether to retry connecting to check for any
error.
This patch amends a527e312b5 "vhost-user-blk: Implement reconnection
during realize".
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-2-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
|
|
Unify format used by trace_pci_update_mappings_del(),
trace_pci_update_mappings_add(), trace_pci_cfg_write() and
trace_pci_cfg_read() to print the device name and bus number,
slot number and function number.
For instance:
pci_cfg_read virtio-net-pci 00:0 @0x20 -> 0xffffc00c
pci_cfg_write virtio-net-pci 00:0 @0x20 <- 0xfea0000c
pci_update_mappings_del d=0x555810b92330 01:00.0 4,0xffffc000+0x4000
pci_update_mappings_add d=0x555810b92330 01:00.0 4,0xfea00000+0x4000
becomes
pci_cfg_read virtio-net-pci 01:00.0 @0x20 -> 0xffffc00c
pci_cfg_write virtio-net-pci 01:00.0 @0x20 <- 0xfea0000c
pci_update_mappings_del virtio-net-pci 01:00.0 4,0xffffc000+0x4000
pci_update_mappings_add virtio-net-pci 01:00.0 4,0xfea00000+0x4000
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211105192541.655831-1-lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add support for configure interrupt, The process is used kvm_irqfd_assign
to set the gsi to kernel. When the configure notifier was signal by
host, qemu will inject a msix interrupt to guest
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-11-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add configure interrupt support for virtio-mmio bus. This
interrupt will be working while the backend is vhost-vdpa
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-10-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add functions to support configure interrupt in virtio_net
The functions are config_pending and config_mask, while
this input idx is VIRTIO_CONFIG_IRQ_IDX will check the
function of configure interrupt.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-9-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add functions to support configure interrupt.
The configure interrupt process will start in vhost_dev_start
and stop in vhost_dev_stop.
Also add the functions to support vhost_config_pending and
vhost_config_mask, for masked_config_notifier, we only
use the notifier saved in vq 0.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-8-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add the functions to support the configure interrupt in virtio
The function virtio_config_guest_notifier_read will notify the
guest if there is an configure interrupt.
The function virtio_config_set_guest_notifier_fd_handler is
to set the fd hander for the notifier
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-7-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add new call back function in vhost-vdpa, this function will
set the event fd to kernel. This function will be called
in the vhost_dev_start and vhost_dev_stop
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-6-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To reuse the interrupt process in configure interrupt
Need to decouple the single vector from the interrupt process. Add new function
kvm_virtio_pci_vector_use_one and _release_one. These functions are use
for the single vector, the whole process will finish in a loop for the vq number.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To reuse the notifier process in configure interrupt.
Use the virtio_pci_get_notifier function to get the notifier.
the INPUT of this function is the IDX, the OUTPUT is notifier and
the vector
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-3-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To support configure interrupt for vhost-vdpa
Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index,
Then we can reuse the functions guest_notifier_mask and guest_notifier_pending.
Add the check of queue index in these drivers, if the driver does not support
configure interrupt, the function will just return
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When bus is looked up on a pci write, we didn't
validate that the lookup succeeded.
Fuzzers thus can trigger QEMU crash by dereferencing the NULL
bus pointer.
Fixes: b32bd763a1 ("pci: introduce acpi-index property for PCI device")
Fixes: CVE-2021-4158
Cc: "Igor Mammedov" <imammedo@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/770
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
|
|
If we warn about the block size being smaller than the default, we skip
some alignment checks.
This can currently only fail on x86-64, when specifying a block size of
1 MiB, however, we detect the THP size of 2 MiB.
Fixes: 228957fea3a9 ("virtio-mem: Probe THP size to determine default block size")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211011173305.13778-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add 7.0 machine types for arm/i440fx/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211217143948.289995-1-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
In SPI-mode, SD card's OCR register: Card Capacity Status (CCS) bit
is not set to 1 correclty when the assigned SD image size is larger
than 2GB (SDHC). This will cause the SD card to be indentified as SDSC
incorrectly. CCS bit should be set to 1 if we are using SDHC.
Also, as there's no power up emulation in SPI-mode.
The OCR register: Card power up status bit bit (busy) should also
be set to 1 when reset. (busy bit is set to LOW if the card has not
finished the power up routine.)
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211228125719.14712-1-frank.chang@sifive.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
'wp_groups' holds a bitmap, rename it as 'wp_group_bmap'.
'wpgrps_size' is the bitmap size (in bits), rename it as
'wp_group_bits'.
Patch created mechanically using:
$ sed -i -e s/wp_groups/wp_group_bmap/ \
-e s/wpgrps_size/wp_group_bits/ hw/sd/sd.c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210728181728.2012952-4-f4bug@amsat.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
|
|
Timers are already initialized in ppc4xx_init(). No need to do it a
second time with a wrong set.
Fixes: d715ea961254 ("PPC: 405: Fix ppc405ep initialization")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
This is a small cleanup to ease reading. It includes the removal of a
check done on the returned value of g_malloc0(), which can not fail.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
