aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2019-10-28Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio: features, tests libqos update with support for virtio 1. Packed ring support for virtio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 25 Oct 2019 12:47:59 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (25 commits) virtio: drop unused virtio_device_stop_ioeventfd() function libqos: add VIRTIO PCI 1.0 support libqos: extract Legacy virtio-pci.c code libqos: make the virtio-pci BAR index configurable libqos: expose common virtqueue setup/cleanup functions libqos: add MSI-X callbacks to QVirtioPCIDevice libqos: pass full QVirtQueue to set_queue_address() libqos: add iteration support to qpci_find_capability() libqos: access VIRTIO 1.0 vring in little-endian libqos: implement VIRTIO 1.0 FEATURES_OK step libqos: enforce Device Initialization order libqos: add missing virtio-9p feature negotiation tests/virtio-blk-test: set up virtqueue after feature negotiation virtio-scsi-test: add missing feature negotiation libqos: extend feature bits to 64-bit libqos: read QVIRTIO_MMIO_VERSION register tests/virtio-blk-test: read config space after feature negotiation virtio: add property to enable packed virtqueue vhost_net: enable packed ring support virtio: event suppression support for packed ring ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-26i386: implement IGNNEPaolo Bonzini
Change the handling of port F0h writes and FPU exceptions to implement IGNNE. The implementation mixes a bit what the chipset and processor do in real hardware, but the effect is the same as what happens with actual FERR# and IGNNE# pins: writing to port F0h asserts IGNNE# in addition to lowering FP_IRQ; while clearing the SE bit in the FPU status word deasserts IGNNE#. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26target/i386: move FERR handling to target/i386Paolo Bonzini
Move it out of pc.c since it is strictly tied to TCG. This is almost exclusively code movement, the next patch will implement IGNNE. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26core: replace getpagesize() with qemu_real_host_page_sizeWei Yang
There are three page size in qemu: real host page size host page size target page size All of them have dedicate variable to represent. For the last two, we use the same form in the whole qemu project, while for the first one we use two forms: qemu_real_host_page_size and getpagesize(). qemu_real_host_page_size is defined to be a replacement of getpagesize(), so let it serve the role. [Note] Not fully tested for some arch or device. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26Merge commit 'df84f17' into HEADPaolo Bonzini
This merge fixes a semantic conflict with the trivial tree. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-25Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Fri 25 Oct 2019 20:18:23 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: yield_until_fd_readable: make it work with any AioContect virtio-blk: Add blk_drain() to virtio_blk_device_unrealize() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Fix typos and docs, trivial changes and RTC devices split # gpg: Signature made Fri 25 Oct 2019 09:35:02 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: hw/rtc/aspeed_rtc: Remove unused includes hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" include hw/rtc/mc146818: Include mc146818rtc_regs.h a bit less hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectory hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectory hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectory hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory hw/timer: Compile devices not target-dependent as common object qemu-timer: reuse MIN macro in qemu_timeout_ns_to_ms event_notifier: avoid dandling file descriptor in event_notifier_cleanup util/async: avoid useless cast pci_bridge: fix a typo in comment qemu-options.hx: Update for reboot-timeout parameter Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/timer/trace-events
2019-10-25virtio-blk: Add blk_drain() to virtio_blk_device_unrealize()Julia Suvorova
QEMU does not wait for completed I/O requests, assuming that the guest driver will reset the device before calling unrealize(). This does not happen on Windows, and QEMU crashes in virtio_notify(), getting the result of a completed I/O request on hot-unplugged device. Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20191018142856.31870-1-jusual@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-10-25hw/arm/highbank: Use AddressSpace when using write_secondary_boot()Philippe Mathieu-Daudé
write_secondary_boot() is used in SMP configurations where the CPU address space might not be the main System Bus. The rom_add_blob_fixed_as() function allow us to specify an address space. Use it to write each boot blob in the corresponding CPU address space. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-15-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_bootPhilippe Mathieu-Daudé
write_secondary_boot() is used in SMP configurations where the CPU address space might not be the main System Bus. The rom_add_blob_fixed_as() function allow us to specify an address space. Use it to write each boot blob in the corresponding CPU address space. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2836: Rename cpus[] as cpu[].corePhilippe Mathieu-Daudé
As we are going to add more core-specific fields, add a 'cpu' structure and move the ARMCPU field there as 'core'. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2836: Make the SoC code modularPhilippe Mathieu-Daudé
This file creates the BCM2836/BCM2837 blocks. The biggest differences with the BCM2838 we are going to add, are the base addresses of the interrupt controller and the peripherals. Add these addresses in the BCM283XInfo structure to make this block more modular. Remove the MCORE_OFFSET offset as it is not useful and rather confusing. Reviewed-by: Esteban Bosse <estebanbosse@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2835_peripherals: Use the SYS_timerPhilippe Mathieu-Daudé
Connect the recently added SYS_timer. Now U-Boot does not hang anymore polling a free running counter stuck at 0. This timer is also used by the Linux kernel thermal subsystem. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20191019234715.25750-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/timer/bcm2835: Add the BCM2835 SYS_timerPhilippe Mathieu-Daudé
Add the 64-bit free running timer. Do not model the COMPARE register (no IRQ generated). This timer is used by Linux kernel and recently U-Boot: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/bcm2835_timer.c?h=v3.7 https://github.com/u-boot/u-boot/blob/v2019.07/include/configs/rpi.h#L19 Datasheet used: https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-4-f4bug@amsat.org [PMM: squashed in switch to using memset in reset] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2835_peripherals: Use the thermal sensor blockPhilippe Mathieu-Daudé
Map the thermal sensor in the BCM2835 block. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20191019234715.25750-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensorPhilippe Mathieu-Daudé
We will soon implement the SYS_timer. This timer is used by Linux in the thermal subsystem, so once available, the subsystem will be enabled and poll the temperature sensors. We need to provide the minimum required to keep Linux booting. Add a dummy thermal sensor returning ~25°C based on: https://github.com/raspberrypi/linux/blob/rpi-5.3.y/drivers/thermal/broadcom/bcm2835_thermal.c Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the milkymist-sysctl code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191021141040.11007-1-peter.maydell@linaro.org
2019-10-25hw/m68k/mcf5206.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the mcf5206 code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20191021140600.10725-1-peter.maydell@linaro.org
2019-10-25hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the grlib_gptimer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191021134357.14266-3-peter.maydell@linaro.org Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/timer/slavio_timer.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the slavio_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191021134357.14266-4-peter.maydell@linaro.org Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25virtio: drop unused virtio_device_stop_ioeventfd() functionStefan Hajnoczi
virtio_device_stop_ioeventfd() has not been used since commit 310837de6c1e0badfd736b1b316b1698c53120a7 ("virtio: introduce grab/release_ioeventfd to fix vhost") in 2016. Nowadays ioeventfd is stopped implicitly by the virtio transport when lifecycle events such as the VM pausing or device unplug occur. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20191021150343.30742-1-stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25vhost_net: enable packed ring supportJason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191025083527.30803-8-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25virtio: event suppression support for packed ringJason Wang
This patch implements event suppression through device/driver area. Please refer virtio specification for more information. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20191025083527.30803-7-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25virtio: basic packed virtqueue supportJason Wang
This patch implements basic support for the packed virtqueue. Compare the split virtqueue which has three rings, packed virtqueue only have one which is supposed to have better cache utilization and more hardware friendly. Please refer virtio specification for more information. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20191025083527.30803-6-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25virtio: Free rnd virqueue at unrealize()Eugenio Pérez
The function virtio_del_queue was not called at unrealize() callback. This was detected due to add an allocated element on the vq introduce in future commits (used_elems) and running address sanitizer memory leak detector. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20191025083527.30803-5-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25virtio: Free blk virqueues at unrealize()Eugenio Pérez
The function virtio_del_queue was not called at unrealize() callback. This was detected due to add an allocated element on the vq introduce in future commits (used_elems) and running address sanitizer memory leak detector. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20191025083527.30803-4-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25virtio: device/driver area size calculation refactor for split ringWei Xu
There is slight size difference between split/packed rings. This is the refactor of split ring as well as a helper to expanding device and driver area size calculation for packed ring. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191025083527.30803-3-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25virtio: basic structure for packed ringWei Xu
Define packed ring structure according to Qemu nomenclature, field data(wrap counter, etc) are also included. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191025083527.30803-2-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-24hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" includePhilippe Mathieu-Daudé
The "hw/ptimer.h" header is not used, remove it. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-14-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw/rtc/mc146818: Include mc146818rtc_regs.h a bit lessPhilippe Mathieu-Daudé
Only 2 source files require the "mc146818rtc_regs.h" header. Instead of having it processed 12 times, by all objects using "mc146818rtc.h", include it directly where used. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-13-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-12-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-11-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Remove Alistair outdated email address (see commit c22e580c2ad). Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-10-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The DS1338 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-9-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The TWL92230 is an "energy management device" companion with a RTC. Since we mostly model the RTC, move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-8-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20191003230404.19384-7-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The M41T80 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-6-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The M48T59 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-5-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The MC146818 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Use copyright statement from 80cabfad163 for "hw/rtc/mc146818rtc.h". Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-4-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The PL031 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw/timer: Compile devices not target-dependent as common objectPhilippe Mathieu-Daudé
All these devices do not contain any target-specific. While most of them are arch-specific, they are shared between different targets of the same arch family (ARM and AArch64, MIPS32/MIPS64, endianess, ...). Put them into common-obj-y to compile them once for all targets. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-2-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24pci_bridge: fix a typo in commentMao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190909031446.1331810-1-maozhongyi@cmss.chinamobile.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw/timer/slavio_timer: Remove useless check for NULL t->timerPeter Maydell
In the slavio timer device, the ptimer TimerContext::timer is always created by slavio_timer_init(), so there's no need to check it for NULL; remove the single unneeded NULL check. This will be useful to avoid compiler/Coverity errors when a subsequent change adds a use of t->timer before the location we currently do the NULL check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191021134357.14266-2-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the xilinx_axidma code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191017132122.4402-4-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/timer/xilinx_timer.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the xilinx_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191017132122.4402-3-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the fsl_etsec code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191017132122.4402-2-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Rebuild hflags for M-profile NVICRichard Henderson
Continue setting, but not relying upon, env->hflags. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24aspeed: Add an AST2600 eval boardCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20191023130455.1347-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/gpio: Fix property accessors of the AST2600 GPIO 1.8V modelCédric Le Goater
The property names of AST2600 GPIO 1.8V model are one character bigger than the names of the other ASPEED GPIO model. Increase the string buffer size by one and be more strict on the expected pattern of the property name. This fixes the QOM test of the ast2600-evb machine under : Apple LLVM version 10.0.0 (clang-1000.10.44.4) Target: x86_64-apple-darwin17.7.0 Thread model: posix InstalledDir: /Library/Developer/CommandLineTools/usr/bin Cc: Rashmica Gupta <rashmica.g@gmail.com> Fixes: 36d737ee82b2 ("hw/gpio: Add in AST2600 specific implementation") Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191023130455.1347-2-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20191024' ↵Peter Maydell
into staging ppc patch queue 2019-10-24 Last pull request before soft freeze. * Lots of fixes and cleanups for spapr interrupt controllers * More SLOF updates to fix problems with full FDT rendering at CAS time (alas, more yet are to come) * A few other assorted changes This isn't quite as well tested as I usually try to do before a pull request. But I've been sick and running into some other difficulties, and wanted to get this sent out before heading towards KVM forum. # gpg: Signature made Thu 24 Oct 2019 09:14:31 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.2-20191024: (28 commits) spapr/xive: Set the OS CAM line at reset ppc/pnv: Fix naming of routines realizing the CPUs ppc: Reset the interrupt presenter from the CPU reset handler ppc/pnv: Add a PnvChip pointer to PnvCore ppc/pnv: Introduce a PnvCore reset handler spapr_cpu_core: Implement DeviceClass::reset spapr: move CPU reset after presenter creation spapr: Don't request to unplug the same core twice pseries: Update SLOF firmware image spapr: Move SpaprIrq::nr_xirqs to SpaprMachineClass spapr: Remove SpaprIrq::nr_msis spapr, xics, xive: Move SpaprIrq::post_load hook to backends spapr, xics, xive: Move SpaprIrq::reset hook logic into activate/deactivate spapr: Remove SpaprIrq::init_kvm hook spapr, xics, xive: Match signatures for XICS and XIVE KVM connect routines spapr, xics, xive: Move dt_populate from SpaprIrq to SpaprInterruptController spapr, xics, xive: Move print_info from SpaprIrq to SpaprInterruptController spapr, xics, xive: Move set_irq from SpaprIrq to SpaprInterruptController spapr: Formalize notion of active interrupt controller spapr, xics, xive: Move irq claim and free from SpaprIrq to SpaprInterruptController ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-21 03:05:07 +0000