aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2017-09-22memory: Get rid of address_space_init_shareableAlexey Kardashevskiy
Since FlatViews are shared now and ASes not, this gets rid of address_space_init_shareable(). This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-17-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21memory: Switch memory from using AddressSpace to FlatViewAlexey Kardashevskiy
FlatView's will be shared between AddressSpace's and subpage_t and MemoryRegionSection cannot store AS anymore, hence this change. In particular, for: typedef struct subpage_t { MemoryRegion iomem; - AddressSpace *as; + FlatView *fv; hwaddr base; uint16_t sub_section[]; } subpage_t; struct MemoryRegionSection { MemoryRegion *mr; - AddressSpace *address_space; + FlatView *fv; hwaddr offset_within_region; Int128 size; hwaddr offset_within_address_space; bool readonly; }; This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-7-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21virtio-serial: add enable_backend callbackPavel Butsykin
We should guarantee that RAM will not be modified while VM has a stopped state, otherwise it can lead to negative consequences during post-copy migration. In RUN_STATE_FINISH_MIGRATE step, it's expected that RAM on source side will not be modified as this could lead to non-consistent vm state on the destination side. Also RAM access during postcopy-ram migration with enabled release-ram capability can lead to sad consequences. Let's add enable_backend() callback to avoid undesirable virtioqueue changes in the guest memory. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Message-Id: <20170919120733.22020-1-pbutsykin@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-20Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into stagingPeter Maydell
These patches fix regressions in 2.10 # gpg: Signature made Wed 20 Sep 2017 07:51:07 BST # gpg: using DSA key 0x02FC3AEB0101DBC2 # gpg: Good signature from "Greg Kurz <groug@kaod.org>" # gpg: aka "Greg Kurz <groug@free.fr>" # gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>" # gpg: aka "Gregory Kurz (Groug) <groug@free.fr>" # gpg: aka "[jpeg image of size 3330]" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2 * remotes/gkurz/tags/for-upstream: 9pfs: check the size of transport buffer before marshaling 9pfs: fix name_to_path assertion in v9fs_complete_rename() 9pfs: fix readdir() for 9p2000.u Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-20Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine/CPU/NUMA queue, 2017-09-19 # gpg: Signature made Tue 19 Sep 2017 21:17:01 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: MAINTAINERS: Update git URLs for my trees hw/acpi-build: Fix SRAT memory building in case of node 0 without RAM NUMA: Replace MAX_NODES with nb_numa_nodes in for loop numa: cpu: calculate/set default node-ids after all -numa CLI options are parsed arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly pc: use generic cpu_model parsing vl.c: convert cpu_model to cpu type and set of global properties before machine_init() cpu: make cpu_generic_init() abort QEMU on error qom: cpus: split cpu_generic_init() on feature parsing and cpu creation parts hostmem-file: Add "discard-data" option osdep: Define QEMU_MADV_REMOVE vl: Clean up user-creatable objects when exiting Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-209pfs: check the size of transport buffer before marshalingJan Dakinevich
v9fs_do_readdir_with_stat() should check for a maximum buffer size before an attempt to marshal gathered data. Otherwise, buffers assumed as misconfigured and the transport would be broken. The patch brings v9fs_do_readdir_with_stat() in conformity with v9fs_do_readdir() behavior. Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com> [groug, regression caused my commit 8d37de41cab1 # 2.10] Signed-off-by: Greg Kurz <groug@kaod.org>
2017-09-209pfs: fix name_to_path assertion in v9fs_complete_rename()Jan Dakinevich
The third parameter of v9fs_co_name_to_path() must not contain `/' character. The issue is most likely related to 9p2000.u protocol only. Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com> [groug, regression caused by commit f57f5878578a # 2.10] Signed-off-by: Greg Kurz <groug@kaod.org>
2017-09-209pfs: fix readdir() for 9p2000.uJan Dakinevich
If the client is using 9p2000.u, the following occurs: $ cd ${virtfs_shared_dir} $ mkdir -p a/b/c $ ls a/b ls: cannot access 'a/b/a': No such file or directory ls: cannot access 'a/b/b': No such file or directory a b c instead of the expected: $ ls a/b c This is a regression introduced by commit f57f5878578a; local_name_to_path() now resolves ".." and "." in paths, and v9fs_do_readdir_with_stat()->stat_to_v9stat() then copies the basename of the resulting path to the response. With the example above, this means that "." and ".." are turned into "b" and "a" respectively... stat_to_v9stat() currently assumes it is passed a full canonicalized path and uses it to do two different things: 1) to pass it to v9fs_co_readlink() in case the file is a symbolic link 2) to set the name field of the V9fsStat structure to the basename part of the given path It only has two users: v9fs_stat() and v9fs_do_readdir_with_stat(). v9fs_stat() really needs 1) and 2) to be performed since it starts with the full canonicalized path stored in the fid. It is different for v9fs_do_readdir_with_stat() though because the name we want to put into the V9fsStat structure is the d_name field of the dirent actually (ie, we want to keep the "." and ".." special names). So, we only need 1) in this case. This patch hence adds a basename argument to stat_to_v9stat(), to be used to set the name field of the V9fsStat structure, and moves the basename logic to v9fs_stat(). Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com> (groug, renamed old name argument to path and updated changelog) Signed-off-by: Greg Kurz <groug@kaod.org>
2017-09-19hw/acpi-build: Fix SRAT memory building in case of node 0 without RAMEduardo Habkost
Currently, Using the fisrt node without memory on the machine makes QEMU unhappy. With this example command line: ... \ -m 1024M,slots=4,maxmem=32G \ -numa node,nodeid=0 \ -numa node,mem=1024M,nodeid=1 \ -numa node,nodeid=2 \ -numa node,nodeid=3 \ Guest reports "No NUMA configuration found" and the NUMA topology is wrong. This is because when QEMU builds ACPI SRAT, it regards node 0 as the default node to deal with the memory hole(640K-1M). this means the node0 must have some memory(>1M), but, actually it can have no memory. Fix this problem by cut out the 640K hole in the same way the PCI 4G hole does. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Message-Id: <1504231805-30957-2-git-send-email-douly.fnst@cn.fujitsu.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19numa: cpu: calculate/set default node-ids after all -numa CLI options are parsedIgor Mammedov
Calculating default node-ids for CPUs in possible_cpu_arch_ids() is rather fragile since defaults calculation uses nb_numa_nodes but callback might be potentially called early before all -numa CLI options are parsed, which would lead to cpus assigned only upto nb_numa_nodes at the time possible_cpu_arch_ids() is called. Issue was introduced by (7c88e65 numa: mirror cpu to node mapping in MachineState::possible_cpus) and for example CLI: -smp 4 -numa node,cpus=0 -numa node would set props.node-id in possible_cpus array for every non explicitly mapped CPU to the first node. Issue is not visible to guest nor to mgmt interface due to 1) implictly mapped cpus are forced to the first node in case of partial mapping 2) in case of default mapping possible_cpu_arch_ids() is called after all -numa options are parsed (resulting in correct mapping). However it's fragile to rely on late execution of possible_cpu_arch_ids(), therefore add machine specific callback that returns node-id for CPU and use it to calculate/ set defaults at machine_numa_finish_init() time when all -numa options are parsed. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1496314408-163972-1-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19virtio-ccw: Create a virtio gpu device for the ccw busFarhan Ali
Wire up the virtio-gpu device for the CCW bus. The virtio-gpu is a virtio-1 device, so disable revision 0. Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <6c53f939cf2d64b66d2a6878b29c9bf3820f3d5b.1505485574.git.alifm@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19virtio-gpu: Handle endian conversionFarhan Ali
Virtio GPU code currently only supports litte endian format, and so using the Virtio GPU device on a big endian machine does not work. Let's fix it by supporting the correct host cpu byte order. Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com> Message-Id: <dc748e15f36db808f90b4f2393bc29ba7556a9f6.1505485574.git.alifm@linux.vnet.ibm.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19virtio-ccw: remove stale comments on endiannessHalil Pasic
We have two stale comments suggesting one should think about virtio config space endianness a bit longer. We have just done that, and came to the conclusion we are fine as is: it's the responsibility of the virtio device and not of the transport (and that is how it works now). Putting the responsibility into the transport isn't even possible, because the transport would have to know about the config space layout of each device. Let us remove the stale comments. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20170914105535.47941-1-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: generate sclp cpu information from possible_cpusDavid Hildenbrand
This is the first step to allow hot plugging of CPUs in a non-sequential order. If a cpu is available ("plugged") can directly be decided by looking at the cpu state pointer. This makes sure, that really only cpus attached to the machine are reported. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-22-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: get rid of cpu_s390x_create()David Hildenbrand
Now that there is only one user of cpu_s390x_create() left, make cpu creation look like on x86. - Perform the model/properties split and checks in s390_init_cpus() - Parse features only once without having to remember if already parsed - Pass only the typename to s390x_new_cpu() - Use the typename of an existing CPU for hotplug via cpu-add Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-21-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: get rid of cpu_states and use possible_cpus insteadDavid Hildenbrand
Now that we have possible_cpus, we can get rid of the global variable and rewrite s390_cpu_addr2state() to use it. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-20-david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: implement query-hotpluggable-cpusDavid Hildenbrand
CPU hotplug is only possible on a per core basis on s390x. So let's add possible_cpus and wire everything up properly. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-19-david@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: CPU hot unplug via device_del cannot work for nowDavid Hildenbrand
device_del on a CPU will currently do nothing. Let's emit an error telling that this is will currently not work (there is no architecture support on s390x). Error message copied from ppc. (qemu) device_del cpu1 device_del cpu1 CPU hot unplug not supported on this machine Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-18-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19target/s390x: use "core-id" for cpu number/address/id handlingDavid Hildenbrand
Some time ago we discussed that using "id" as property name is not the right thing to do, as it is a reserved property for other devices and will not work with device_add. Switch to the term "core-id" instead, and use it as an equivalent to "CPU address" mentioned in the PoP. There is no such thing as cpu number, so rename env.cpu_num to env.core_id. We use "core-id" as this is the common term to use for device_add later on (x86 and ppc). We can get rid of cpu->id now. Keep cpu_index and env->core_id in sync. cpu_index was already implicitly used by e.g. cpu_exists(), so keeping both in sync seems to be the right thing to do. cpu_index will now no longer automatically get set via cpu_exec_realizefn(). For now, we were lucky that both implicitly stayed in sync. Our new cpu property "core-id" can be a static property. Range checks can be avoided by using the correct type and the "setting after realized" check is done implicitly. device_add will later need the reserved "id" property. Hotplugging a CPU on s390x will then be: "device_add host-s390-cpu,id=cpu2,core-id=2". Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-14-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: allow only 1 CPU with TCGDavid Hildenbrand
Specifying more than 1 CPU (e.g. -smp 5) leads to SIGP errors (the guest tries to bring these CPUs up but fails), because we don't support multiple CPUs on s390x under TCG. Let's bail out if more than 1 is specified, so we don't raise people's hope. Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-12-david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: move s390_virtio_hypercall() to s390-virtio-hcall.hDavid Hildenbrand
Implemented in hw/s390x/s390-virtio-hcall.c, so let's move it to the right header file. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-6-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: rename s390-virtio.h to s390-virtio-hcall.hDavid Hildenbrand
The only interface left, so let's properly rename it. Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-5-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: get rid of s390-virtio.cDavid Hildenbrand
It is a leftover from the days where we had still the !ccw virtio machine. As this one is long gone, let's move everything to s390-virtio-ccw.c. Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-4-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/css: remove unused error handling branchHalil Pasic
The case in question actually never happens. Let us get rid of the dead code. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170908152446.14606-4-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/css: fix NULL handling for CCW addressesHalil Pasic
Back then in the time of df1fe5bb49 ("s390: Virtual channel subsystem support.", 2013-01-24) -EIO used to map to a channel-program check (via the default label of the switch statement). Then 2dc95b4cac ("s390x/3270: 3270 data stream handling", 2016-04-01) came along and that changed dramatically. Let us roll back this undesired side effect, and go back to channel-program check. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Fixes: 2dc95b4cac "s390x/3270: 3270 data stream handling" Message-Id: <20170908152446.14606-3-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/css: drop data-check in interpretationHalil Pasic
The architecture says that channel-data check is indicating that an uncorrected storage (memory) error has been detected in regard to the data residing in main storage (memory) that is currently used for an I/O operation. The described detection is done using the CBC technology. The ccw interpretation code is however generating a channel-data check effectively when the (device specific) ccw_cb returns -EFAULT. In case of virtio-ccw devices this happens when mapping memory fails, or when a NULL pointer is encountered. So this behavior is not architecture conform. Furthermore the best fit for these situations (null pointer, mapping a piece of guest memory fails) from architectural perspective the condition described as the channel subsystem refers to a location that is not available, which when encountered shall result in a channel-program check. To fix this, all we have to do is to get rid of the switch case matching -EFAULT: the default is generating a channel-program check. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170908152446.14606-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19hw/misc/ivshmem: Fix ivshmem_recv_msg() to also work on big endian systemsThomas Huth
The "slow" ivshmem-tests currently fail when they are running on a big endian host: $ uname -m ppc64 $ V=1 QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/ivshmem-test -m slow /x86_64/ivshmem/single: OK /x86_64/ivshmem/hotplug: OK /x86_64/ivshmem/memdev: OK /x86_64/ivshmem/pair: OK /x86_64/ivshmem/server-msi: qemu-system-x86_64: -device ivshmem-doorbell,chardev=chr0,vectors=2: server sent invalid ID message Broken pipe The problem is that the server side code in ivshmem_server_send_one_msg() correctly translates all messages IDs into little endian 64-bit values, but the client side code in the ivshmem_recv_msg() function does not swap the byte order back. Fix it by passing the value through le64_to_cpu(). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1504100343-26607-1-git-send-email-thuth@redhat.com> Tested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/pci: add iommu replay callbackYi Min Zhao
Let's introduce iommu replay callback for s390 pci iommu memory region. Currently we don't need any dma mapping replay. So let it return directly. This implementation will avoid meaningless loops calling translation callback. Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Message-Id: <1504606380-49341-4-git-send-email-zyimin@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/pci: remove idx from msix msg dataYi Min Zhao
PCIDevice pointer has been a parameter of kvm_arch_fixup_msi_route(). So we don't need to store zpci idx in msix message data to find out the specific zpci device. Instead, we could use pci device id to find its corresponding zpci device. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Message-Id: <1504606380-49341-2-git-send-email-zyimin@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x/css: fix cc handling for XSCHHalil Pasic
The function ioinst_handle_xsch is presenting cc 2 when it's supposed to present cc 1 and the other way around, because css_do_xsch has the error codes mixed up. Because cc 1 has precedence over cc 2 we also have to swap the two checks. Let us fix this. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reported-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Message-Id: <20170831121828.85885-1-pasic@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19osdep.h: Prohibit disabling assert() in supported buildsEric Blake
We already have several files that knowingly require assert() to work, sometimes because refactoring the code for proper error handling has not been tackled yet; there are probably other files that have a similar situation but with no comments documenting the same. In fact, we have places in migration that handle untrusted input with assertions, where disabling the assertions risks a worse security hole than the current behavior of losing the guest to SIGABRT when migration fails because of the assertion. Promote our current per-file safety-valve to instead be project-wide, and expand it to also cover glib's g_assert(). Note that we do NOT want to encourage 'assert(side-effects);' (that is a bad practice that prevents copy-and-paste of code to other projects that CAN disable assertions; plus it costs unnecessary reviewer mental cycles to remember whether a project special-cases the crippling of asserts); and we would LIKE to fix migration to not rely on asserts (but that takes a big code audit). But in the meantime, we DO want to send a message that anyone that disables assertions has to tweak code in order to compile, making it obvious that they are taking on additional risk that we are not going to support. At the same time, leave comments mentioning NDEBUG in files that we know still need to be scrubbed, so there is at least something to grep for. It would be possible to come up with some other mechanism for doing runtime checking by default, but which does not abort the program on failure, while leaving side effects in place (unlike how crippling assert() avoids even the side effects), perhaps under the name q_verify(); but it was not deemed worth the effort (developers should not have to learn a replacement when the standard C macro works just fine, and it would be a lot of churn for little gain). The patch specifically uses #error rather than #warn so that a user is forced to tweak the header to acknowledge the issue, even when not using a -Werror compilation. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20170911211320.25385-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19General warn report fixupsAlistair Francis
Tidy up some of the warn_report() messages after having converted them to use warn_report(). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert multi-line fprintf() to warn_report()Alistair Francis
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert single line fprintf(.../n) to warn_report()Alistair Francis
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \ {} + Some of the lines were manually edited to reduce the line length to below 80 charecters. The #include lines were manually updated to allow the code to compile. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips] Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19hw/i386: Improve some of the warning messagesAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1d6ef2ccd9667878ed5820fcf17eef35957ea5d8.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19multiboot: validate multiboot header address valuesPrasad J Pandit
While loading kernel via multiboot-v1 image, (flags & 0x00010000) indicates that multiboot header contains valid addresses to load the kernel image. These addresses are used to compute kernel size and kernel text offset in the OS image. Validate these address values to avoid an OOB access issue. This is CVE-2017-14167. Reported-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <20170907063256.7418-1-ppandit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi/esp: Rename the ESP macro to ESP_STATEKamil Rytarowski
SunOS defines ESP (x86 register) in <sys/regset.h> as 7. This fixes build on SmartOS (Joyent). Signed-off-by: Kamil Rytarowski <n54@gmx.com> Message-Id: <20170909142116.26816-1-n54@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directlyIgor Mammedov
there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19pc: use generic cpu_model parsingIgor Mammedov
define default CPU type in generic way in pc_machine_class_init() and let common machine code to handle cpu_model parsing Patch also introduces TARGET_DEFAULT_CPU_TYPE define for 2 purposes: * make foo_machine_class_init() look uniform on every target * use define in [bsd|linux]-user targets to pick default cpu type Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1505318697-77161-5-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19cpu: make cpu_generic_init() abort QEMU on errorIgor Mammedov
Almost every user of cpu_generic_init() checks for returned NULL and then reports failure in a custom way and aborts process. Some users assume that call can't fail and don't check for failure, though they should have checked for it. In either cases cpu_generic_init() failure is fatal, so instead of checking for failure and reporting it various ways, make cpu_generic_init() report errors in consistent way and terminate QEMU on failure. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1505318697-77161-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19scsi: move block/scsi.h to include/scsi/constants.hPaolo Bonzini
Complete the transition by renaming this header, which was shared by block/iscsi.c and the SCSI emulation code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: introduce sg_io_sense_from_errnoPaolo Bonzini
Move more knowledge of SG_IO out of hw/scsi/scsi-generic.c, for reusability. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: introduce scsi_build_sensePaolo Bonzini
Move more knowledge of sense data format out of hw/scsi/scsi-bus.c for reusability. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move non-emulation specific code to scsi/Paolo Bonzini
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and hw/scsi, but the introduction of the persistent reservation helper will add many more instances of this. There is also include/block/scsi.h, which actually is not part of the core block layer. The persistent reservation manager will also need a home. A scsi/ directory provides one for both the aforementioned shared code and the PR manager code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: rename scsi_build_sense to scsi_convert_sensePaolo Bonzini
After introducing the scsi/ subdirectory, there will be a scsi_build_sense function that is the same as scsi_req_build_sense but without needing a SCSIRequest. The existing scsi_build_sense function gets in the way, remove it. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi-block: Support rerror/werrorFam Zheng
This makes the werror/rerror options available on the scsi-block device, to allow user specify error handling policy similar to scsi-hd. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170821141008.19383-5-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi-bus: correct responses for INQUIRY and REQUEST SENSEHannes Reinecke
According to SPC-3 INQUIRY and REQUEST SENSE should return GOOD even on unsupported LUNS. Signed-off-by: Hannes Reinecke <hare@suse.com> Message-Id: <1503049022-14749-1-git-send-email-hare@suse.de> Reported-by: Laszlo Ersek <lersek@redhat.com> Fixes: ded6ddc5a7b95217557fa360913d1213e12d4a6d Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de>
2017-09-19virtio-scsi: Add virtqueue_size parameter allowing virtqueue size to be set.Richard W.M. Jones
Since Linux switched to blk-mq as the default in Linux commit 5c279bd9e406 ("scsi: default to scsi-mq"), virtio-scsi LUNs consume about 10x as much guest kernel memory. This commit allows you to choose the virtqueue size for each virtio-scsi-pci controller like this: -device virtio-scsi-pci,id=scsi,virtqueue_size=16 The default is still 128 as before. Using smaller virtqueue_size allows many more disks to be added to small memory virtual machines. For a 1 vCPU, 500 MB, no swap VM I observed: With scsi-mq enabled (upstream kernel): 175 disks -"- ditto -"- virtqueue_size=64: 318 disks -"- ditto -"- virtqueue_size=16: 775 disks With scsi-mq disabled (kernel before 5c279bd9e406): 1755 disks Note that to have any effect, this requires a kernel patch: https://lkml.org/lkml/2017/8/10/689 Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170810165255.20865-1-rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-18hw/block/fdc: Convert to realizeMao Zhongyi
Convert floppy_drive_init() to realize and rename it to floppy_drive_realize(). Cc: John Snow <jsnow@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 87119b34f32e2acf7166165fb5d8e6fca787b3bc.1505737465.git.maozy.fnst@cn.fujitsu.com Signed-off-by: John Snow <jsnow@redhat.com>
2017-09-18hw/ide: Convert DeviceClass init to realizeMao Zhongyi
Replace init with realize in IDEDeviceClass, which has errp as a parameter. So all the implementations now use error_setg instead of error_report for reporting error. Cc: John Snow <jsnow@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: c4d27b4b5d9e37468e63e35214ce4833ca271542.1505737465.git.maozy.fnst@cn.fujitsu.com Signed-off-by: John Snow <jsnow@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-04 04:16:31 +0000