| Age | Commit message (Collapse) | Author |
|---|
|
The atomic_cmpxchg() loop is broken because we occasionally end up with
old and _old having different values (a legit compiler can generate code
that accessed *ind_addr again to pick up a value for _old instead of
using the value of old that was already fetched according to the
rules of the abstract machine). This means the underlying CS instruction
may use a different old (_old) than the one we intended to use if
atomic_cmpxchg() performed the xchg part.
Let us use volatile to force the rules of the abstract machine for
accesses to *ind_addr. Let us also rewrite the loop so, we that the
new old is used to compute the new desired value if the xchg part
is not performed.
Fixes: 7e7494627f ("s390x/virtio-ccw: Adapter interrupt support.")
Reported-by: Andre Wild <Andre.Wild1@ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200616045035.51641-2-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Commit 5d971f9e672507210e77d020d89e0e89165c8fc9
"memory: Revert "memory: accept mismatching sizes in
memory_region_access_valid"" broke most RISC-V boards as they do 64 bit
accesses to the CLINT and QEMU would trigger a fault. Fix this failure
by allowing 8 byte accesses.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
Message-Id: <122b78825b077e4dfd39b444d3a46fe894a7804c.1593547870.git.alistair.francis@wdc.com>
|
|
Claiming an interrupt and changing the source priority both potentially
affect whether an interrupt is pending, thus we must re-compute xEIP.
Note that we don't put the sifive_plic_update inside sifive_plic_claim
so that the logging of a claim (and the resulting IRQ) happens before
the state update, making the causal effect clear, and that we drop the
explicit call to sifive_plic_print_state when claiming since
sifive_plic_update already does that automatically at the end for us.
This can result in both spurious interrupt storms if you fail to
complete an IRQ before enabling interrupts (and no other actions occur
that result in a call to sifive_plic_update), but also more importantly
lost interrupts if a disabled interrupt is pending and then becomes
enabled.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200618210649.22451-1-jrtc27@jrtc27.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The source priorities can be used to order sources with respect to other
sources, not just as a way to enable/disable them based off a threshold.
We must therefore always claim the highest-priority source, rather than
the first source we find.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200618202343.20455-1-jrtc27@jrtc27.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
into staging
Error reporting patches patches for 2020-07-02
# gpg: Signature made Thu 02 Jul 2020 10:55:48 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2020-07-02: (28 commits)
migration/rdma: Plug memory leaks in qemu_rdma_registration_stop()
arm/{bcm2835,fsl-imx25,fsl-imx6}: Fix realize error API violations
hw/arm/armsse: Fix armsse_realize() error API violation
aspeed: Fix realize error API violation
arm/stm32f205 arm/stm32f405: Fix realize error API violation
amd_iommu: Fix amdvi_realize() error API violation
x86: Fix x86_cpu_new() error handling
mips/cps: Fix mips_cps_realize() error API violations
riscv_hart: Fix riscv_harts_realize() error API violations
riscv/sifive_u: Fix sifive_u_soc_realize() error API violations
hw/arm: Drop useless object_property_set_link() error handling
hw: Fix error API violation around object_property_set_link()
qdev: Drop qbus_set_hotplug_handler() parameter @errp
qdev: Drop qbus_set_bus_hotplug_handler() parameter @errp
aspeed: Clean up roundabout error propagation
vnc: Plug minor memory leak in vnc_display_open()
test-util-filemonitor: Plug unlikely memory leak
sd/milkymist-memcard: Plug minor memory leak in realize
qga: Plug unlikely memory leak in guest-set-memory-blocks
spapr: Plug minor memory leak in spapr_machine_init()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Discarding RAM does not work as expected with protected VMs. Let's
switch to ram_block_discard_disable() for now, as we want to get rid
of qemu_balloon_inhibit(). Note that it will currently never fail, but
might fail in the future with new technologies (e.g., virtio-mem).
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-6-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
VFIO is (except devices without a physical IOMMU or some mediated devices)
incompatible with discarding of RAM. The kernel will pin basically all VM
memory. Let's convert to ram_block_discard_disable(), which can now
fail, in contrast to qemu_balloon_inhibit().
Leave "x-balloon-allowed" named as it is for now.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
E.g., with "pc-q35-4.2", trying to coldplug a virtio-pmem-pci devices
results in
"virtio-pmem-pci not supported on this bus"
Reasons is, that the bus does not support hotplug and, therefore, does
not have a hotplug handler. Let's allow coldplugging virtio-pmem devices
on such buses. The hotplug order is only relevant for virtio-pmem-pci
when the guest is already alive and the device is visible before
memory_device_plug() wired up the memory device bits.
Hotplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Hotunplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If something goes wrong during precopy, before stopping the VM, we will
never send a S_DONE indication to the VM, resulting in the hinted pages
not getting released to be used by the guest OS (e.g., Linux).
Easy to reproduce:
1. Start migration (e.g., HMP "migrate -d 'exec:gzip -c > STATEFILE.gz'")
2. Cancel migration (e.g., HMP "migrate_cancel")
3. Oberve in the guest (e.g., cat /proc/meminfo) that there is basically
no free memory left.
While at it, add similar locking to virtio_balloon_free_page_done() as
done in virtio_balloon_free_page_stop. Locking is still weird, but that
has to be sorted out separately.
There is nothing to do in the PRECOPY_NOTIFY_COMPLETE case. Add some
comments regarding S_DONE handling.
Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200629080615.26022-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
bcm2835_peripherals_realize(), fsl_imx25_realize() and
fsl_imx6_realize() are wrong that way: they pass &err to
object_property_set_uint() and object_property_set_bool() without
checking it, and then to sysbus_realize(). Harmless, because the
former can't actually fail here.
Fix by passing &error_abort instead.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-26-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
armsse_realize() is wrong that way: it passes &err to
object_property_set_int() multiple times without checking it, and then
to sysbus_realize(). Harmless, because the former can't actually fail
here.
Fix by passing &error_abort instead.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-25-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
aspeed_soc_ast2600_realize() and aspeed_soc_realize() are wrong that
way: they pass &err to object_property_set_int() and
object_property_set_bool() without checking it, and then to
sysbus_realize(). Harmless, because the former can't actually fail
here.
Fix by passing &error_abort instead.
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-24-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
stm32f205_soc_realize() and stm32f405_soc_realize() are wrong that
way: they pass &err to object_property_set_int() without checking it,
and then to qdev_realize(). Harmless, because the former can't
actually fail here.
Fix by passing &error_abort instead.
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
amdvi_realize() is wrong that way: it passes @errp to qdev_realize(),
object_property_get_int(), and msi_init() without checking it. I
can't tell offhand whether qdev_realize() can fail here. Fix by
checking it for failure. object_property_get_int() can't. Fix by
passing &error_abort instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-22-armbru@redhat.com>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
x86_cpu_new() is wrong that way: it passes &local_err to
object_property_set_uint() without checking it, and then to
qdev_realize(). If both fail, we'll trip error_setv()'s assertion.
To assess the bug's impact, we'd need to figure out how to make both
calls fail. Too much work for ignorant me, sorry.
Fix by checking for failure right away.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-21-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
mips_cps_realize() is wrong that way: it passes &err to multiple
object_property_set_FOO() without checking for failure, and then to
sysbus_realize(). Harmless, because the object_property_set_FOO()
can't actually fail here.
Fix by passing &error_abort instead.
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-20-armbru@redhat.com>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
riscv_harts_realize() is wrong that way: it passes @errp to
riscv_hart_realize() in a loop. I can't tell offhand whether this can
fail.
Fix by checking for failure in each iteration.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-19-armbru@redhat.com>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
sifive_u_soc_realize() is wrong that way: it passes &err to
sysbus_realize() four times before checking it. Harmless, because the
first three can't actually fail (I think).
Fix by checking for failure right away.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-18-armbru@redhat.com>
|
|
object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails. These are all programming
errors here, so passing it &error_abort is appropriate.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200630090351.1247703-17-armbru@redhat.com>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
virtio_gpu_pci_base_realize(), virtio_vga_base_realize(),
sparc32_ledma_device_realize(), sparc32_dma_realize(),
sparc32_dma_realize() xilinx_axidma_realize(), mips_cps_realize(),
macio_realize_ide(), xilinx_enet_realize(), and
virtio_iommu_pci_realize() are wrong that way: they reuse the argument
they pass to object_property_set_link() for another call.
Harmless, because object_property_set_link() can't actually fail for
them: it fails when the property doesn't exist, is not settable, or
its .check() method fails. Fix by passing &error_abort instead.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-16-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
qbus_set_hotplug_handler() is a simple wrapper around
object_property_set_link().
object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails. These are all programming
errors here, so passing &error_abort to qbus_set_hotplug_handler() is
appropriate.
Most of its callers do. Exceptions:
* pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL,
i.e. they ignore errors.
* spapr_machine_init() passes &error_fatal.
* s390_pcihost_realize(), virtio_serial_device_realize(),
s390_pcihost_plug() pass the error to their callers. The latter two
keep going after the error, which looks wrong.
Drop the @errp parameter, and instead pass &error_abort to
object_property_set_link().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
|
|
All callers pass &error_abort. Drop the parameter.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-14-armbru@redhat.com>
|
|
Replace
sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &local_err);
error_propagate(&err, local_err);
if (err) {
error_propagate(errp, err);
return;
}
by
sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &err);
if (err) {
error_propagate(errp, err);
return;
}
Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200630090351.1247703-13-armbru@redhat.com>
|
|
milkymist_memcard_realize() leaks an Error object when realization of
its "sd-card" device fails. Quite harmless, since we only ever
realize this once, in milkymist_init() via milkymist_memcard_create().
Plug the leak.
Fixes: 3d0369ba499866cc6a839f71212d97876500762d
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
spapr_machine_init() leaks an Error object when
kvmppc_check_papr_resize_hpt() fails and spapr->resize_hpt is
SPAPR_RESIZE_HPT_DISABLED, i.e. when the host doesn't support hash
page table resizing, and the user didn't ask for it. As harmless as
memory leaks can possibly be. Plug it.
Fixes: 30f4b05bd090564181554d0890605eb2c143e4ea
Cc: David Gibson <dgibson@redhat.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200630090351.1247703-8-armbru@redhat.com>
|
|
error_report_err() frees its first argument. Freeing it again is
wrong. Don't.
Fixes: 47287c27d0c367a89f7b2851e23a7f8b2d499dd6
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Receiving the error in a local variable only to free it is less clear
(and also less efficient) than passing NULL. Clean up.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Jerome Forissier <jerome@forissier.org>
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200630090351.1247703-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200630090351.1247703-3-armbru@redhat.com>
|
|
Commit 150ab54aa6 "net/virtio: fix re-plugging of primary device"
fixed failover_replug_primary() to return false on failure. Commit
5a0948d36c "net/virtio: Fix failover error handling crash bugs" broke
it again for hotplug_handler_plug() failure. Unbreak it.
Commit 5a0948d36c4cbc1c5534afac6fee99de55245d12
Fixes: 5a0948d36c4cbc1c5534afac6fee99de55245d12
Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200630090351.1247703-2-armbru@redhat.com>
|
|
Fix a typo in an error message in virtio_iommu_pci_realize():
"Check you machine" should be "Check your machine".
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200625100811.12690-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Radeon chips have an SDRAM mode reg that is accessed by some drivers.
We don't emulate the memory controller but provide some default value
to prevent drivers getting unexpected 0.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: cc1324b9ef06beb8ae233ddc77dedd8bab9b8624.1592737958.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Do not abort on unsupported value just print log and continue. While
display will likely be broken this prevents malicious guest to crash
QEMU causing denial of service.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 0c13dab5d8e3b7e7479c3edbf53aeac8c09de6de.1592737958.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This fixes horizontal mouse movement and pointer color with MacOS that
writes these registers with access size less than 4 so previously only
the last portion of access was effective overwriting previous partial
writes.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: ba1d5ba97f246e8807f86f1243c2bdc6497dc8f2.1592737958.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When doing reverse blit we need to check if source and dest overlap
but it is not trivial due to possible different base and pitch of
source and dest. Do rectangle overlap if base and pitch match,
otherwise just check if memory area containing the rects overlaps so
rects could possibly overlap.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200624164737.A941374633D@zero.eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: caf97bf0c84a440896ddf020e84c312fa5c15076.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Prevent guest setting invalid format value that might trip checks in
sm501_2d_operation().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 26d4fa9b8ce81e2723e98d592ccba7550042752c.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Instead of open coding op with different sizes using a switch and type
casting it can be written more compactly using stn_he_p/ldn_he_p.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: e2f649cb286f0735a10ec87c1b36a7ae081acb61.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Some guests do 1x1 blits which is faster to do directly than calling a
function for it so avoid overhead in this case.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 7cccc302d7b4c5c313bad7681ac4686417143c3e.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The bytes per pixel value can be calculated from format but it's used
freqently enough (and will be used more in subseqent patches) so store
it in a variable for better readabilty. Also drop some unneded 0x
prefix around where new variable is defined.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: b9ea5ef2d68583db9f3fb73a2b859abbd7c044a8.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Some guests seem to try source copy blits with same source and dest
which are no-op so avoid calling pixman for these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: a2a8214dd37344dfb65f1c343ace4cff2e94f3bb.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
We don't need a separate variable to keep track if we allocated memory
that needs to be freed as we can test the pointer itself.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ff9136c3151a15cdfa1d9b7a68acf11cffb8efa4.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
We don't need to add width to pitch when calculating last point, that
would reject valid ops within the card's local_mem.
Fixes: b15a22bbcbe6a78dc3d88fe3134985e4cdd87de4
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ddb5781d12913bb9d6dbfd9e5b1e2b893e2b3e2d.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When adding the generic PCA955xClass in commit 736132e455, we
forgot to set the class_size field. Fill it now to avoid:
(gdb) run -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
Starting program: ../../qemu/qemu/arm-softmmu/qemu-system-arm -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
double free or corruption (!prev)
Thread 1 "qemu-system-arm" received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
(gdb) where
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007ffff75d8859 in __GI_abort () at abort.c:79
#2 0x00007ffff76433ee in __libc_message
(action=action@entry=do_abort, fmt=fmt@entry=0x7ffff776d285 "%s\n")
at ../sysdeps/posix/libc_fatal.c:155
#3 0x00007ffff764b47c in malloc_printerr
(str=str@entry=0x7ffff776f690 "double free or corruption (!prev)")
at malloc.c:5347
#4 0x00007ffff764d12c in _int_free
(av=0x7ffff779eb80 <main_arena>, p=0x5555567a3990, have_lock=<optimized out>) at malloc.c:4317
#5 0x0000555555c906c3 in type_initialize_interface
(ti=ti@entry=0x5555565b8f40, interface_type=0x555556597ad0, parent_type=0x55555662ca10) at qom/object.c:259
#6 0x0000555555c902da in type_initialize (ti=ti@entry=0x5555565b8f40)
at qom/object.c:323
#7 0x0000555555c90d20 in type_initialize (ti=0x5555565b8f40)
at qom/object.c:1028
$ valgrind --track-origins=yes qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
==77479== Memcheck, a memory error detector
==77479== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==77479== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info
==77479== Command: qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
==77479==
==77479== Invalid write of size 2
==77479== at 0x6D8322: pca9552_class_init (pca9552.c:424)
==77479== by 0x844D1F: type_initialize (object.c:1029)
==77479== by 0x844D1F: object_class_foreach_tramp (object.c:1016)
==77479== by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
==77479== by 0x8453A4: object_class_foreach (object.c:1038)
==77479== by 0x8453A4: object_class_get_list (object.c:1095)
==77479== by 0x556194: select_machine (vl.c:2416)
==77479== by 0x556194: qemu_init (vl.c:3828)
==77479== by 0x40AF9C: main (main.c:48)
==77479== Address 0x583f108 is 0 bytes after a block of size 200 alloc'd
==77479== at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==77479== by 0x4AF8D30: g_malloc0 (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
==77479== by 0x844258: type_initialize.part.0 (object.c:306)
==77479== by 0x844D1F: type_initialize (object.c:1029)
==77479== by 0x844D1F: object_class_foreach_tramp (object.c:1016)
==77479== by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
==77479== by 0x8453A4: object_class_foreach (object.c:1038)
==77479== by 0x8453A4: object_class_get_list (object.c:1095)
==77479== by 0x556194: select_machine (vl.c:2416)
==77479== by 0x556194: qemu_init (vl.c:3828)
==77479== by 0x40AF9C: main (main.c:48)
Fixes: 736132e455 ("hw/misc/pca9552: Add generic PCA955xClass")
Reported-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 20200629074704.23028-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Loongson-3 has an integrated liointc (Local I/O Interrupt Controller).
It is similar to Goldfish interrupt controller, but more powerful (e.g.,
it can route external interrupt to multi-cores).
Documents about Loongson-3's liointc:
1, https://wiki.godson.ac.cn/ip_block:liointc;
2, The "I/O中断" section of Loongson-3's user mannual, part 1.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1592995531-32600-3-git-send-email-chenhc@lemote.com>
|
|
'remotes/pmaydell/tags/pull-target-arm-20200626' into staging
target-arm queue:
* hw/arm/aspeed: improve QOM usage
* hw/misc/pca9552: trace GPIO change events
* target/arm: Implement ARMv8.5-MemTag for system emulation
# gpg: Signature made Fri 26 Jun 2020 16:13:27 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200626: (57 commits)
target/arm: Enable MTE
target/arm: Add allocation tag storage for system mode
target/arm: Create tagged ram when MTE is enabled
target/arm: Cache the Tagged bit for a page in MemTxAttrs
target/arm: Always pass cacheattr to get_phys_addr
target/arm: Set PSTATE.TCO on exception entry
target/arm: Implement data cache set allocation tags
target/arm: Complete TBI clearing for user-only for SVE
target/arm: Add mte helpers for sve scatter/gather memory ops
target/arm: Handle TBI for sve scalar + int memory ops
target/arm: Add mte helpers for sve scalar + int ff/nf loads
target/arm: Add mte helpers for sve scalar + int stores
target/arm: Add mte helpers for sve scalar + int loads
target/arm: Add arm_tlb_bti_gp
target/arm: Tidy trans_LD1R_zpri
target/arm: Use mte_check1 for sve LD1R
target/arm: Use mte_checkN for sve unpredicated stores
target/arm: Use mte_checkN for sve unpredicated loads
target/arm: Add helper_mte_check_zva
target/arm: Implement helper_mte_checkN
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* Various fixes
* libdaxctl support to correctly align devdax character devices (Jingqi)
* initial-all-set support for live migration (Jay)
* forbid '-numa node, mem' for 5.1 and newer machine types (Igor)
* x87 fixes (Joseph)
* Tighten memory_region_access_valid (Michael) and fix fallout (myself)
* Replay fixes (Pavel)
# gpg: Signature made Fri 26 Jun 2020 14:42:17 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (31 commits)
i386: Mask SVM features if nested SVM is disabled
ibex_uart: fix XOR-as-pow
vmport: move compat properties to hw_compat_5_0
hyperv: vmbus: Remove the 2nd IRQ
kvm: i386: allow TSC to differ by NTP correction bounds without TSC scaling
numa: forbid '-numa node, mem' for 5.1 and newer machine types
osdep: Make MIN/MAX evaluate arguments only once
target/i386: Add notes for versioned CPU models
target/i386: reimplement fpatan using floatx80 operations
target/i386: reimplement fyl2x using floatx80 operations
target/i386: reimplement fyl2xp1 using floatx80 operations
target/i386: reimplement fprem, fprem1 using floatx80 operations
softfloat: return low bits of quotient from floatx80_modrem
softfloat: do not set denominator high bit for floatx80 remainder
softfloat: do not return pseudo-denormal from floatx80 remainder
softfloat: fix floatx80 remainder pseudo-denormal check for zero
softfloat: merge floatx80_mod and floatx80_rem
target/i386: reimplement f2xm1 using floatx80 operations
xen: Actually fix build without passthrough
Makefile: Install qemu-[qmp/ga]-ref.* into the directory "interop"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The xor-as-pow warning in clang actually detected a genuine bug.
Fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The patches that introduced the properties were submitted when QEMU 5.0
had not been released yet, so they got merged under the wrong heading.
Move them to hw_compat_5_0 so that 5.0 machine types get the pre-patch
behavior.
Fixes: b889212973da ("hw/i386/vmport: Propagate IOPort read to vCPU EAX register")
Fixes: 0342ee761ef2 ("hw/i386/vmport: Set EAX to -1 on failed and unsupported commands")
Fixes: f8bdc550370f ("hw/i386/vmport: Report vmware-vmx-type in CMD_GETVERSION")
Fixes: aaacf1c15a22 ("hw/i386/vmport: Add support for CMD_GETBIOSUUID")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It seems like Windows does not really require 2 IRQs to have a
functioning VMBus.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200617160904.681845-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
