| Age | Commit message (Collapse) | Author |
|---|
|
hw_error() dumps the CPU state and exits QEMU. This is ok during initial
code development (to see where the guest code is currently executing),
but it is certainly not the desired behavior that we want to present to
normal users, and it can also cause trouble when e.g. fuzzing devices.
Thus let's replace these hw_error()s by qemu_log_mask()s instead.
Message-Id: <20200611055807.15921-1-huth@tuxfamily.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
|
|
'remotes/pmaydell/tags/pull-target-arm-20200703' into staging
target-arm queue:
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let the virtio-iommu bypass MSIs
* target/arm: kvm: Handle DABT with no valid ISS
* hw/arm/virt-acpi-build: Only expose flash on older machine types
* target/arm: Fix temp double-free in sve ldr/str
* hw/display/bcm2835_fb.c: Initialize all fields of struct
* hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
* Deprecate TileGX port
# gpg: Signature made Fri 03 Jul 2020 17:53:05 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200703: (34 commits)
Deprecate TileGX port
Replace uses of FROM_SSI_SLAVE() macro with QOM casts
hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg
hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses
hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Encapsulate misc GPIO handling in a device
hw/misc/max111x: Create header file for documentation, TYPE_ macros
hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
hw/arm/spitz: Use max111x properties to set initial values
ssi: Add ssi_realize_and_unref()
hw/misc/max111x: Don't use vmstate_register()
hw/misc/max111x: provide QOM properties for setting initial values
hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals
hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState
hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState
hw/arm/spitz: Create SpitzMachineClass abstract base class
hw/arm/spitz: Detabify
hw/display/bcm2835_fb.c: Initialize all fields of struct
target/arm: Fix temp double-free in sve ldr/str
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
s390 update:
- various fixes
- cleanup in the s390x-ccw bios
# gpg: Signature made Fri 03 Jul 2020 11:04:08 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20200703:
s390x/pci: fix set_ind_atomic
virtio-ccw: fix virtio_set_ind_atomic
target/s390x: Fix SQXBR
pc-bios/s390: Update s390-ccw bios binaries with the latest changes
pc-bios/s390-ccw: Generate and include dependency files in the Makefile
pc-bios: s390x: Make u32 ptr check explicit
pc-bios: s390x: Use ebcdic2ascii table
pc-bios: s390x: Move panic() into header and add infinite loop
pc-bios: s390x: Use PSW masks where possible and introduce PSW_MASK_SHORT_ADDR
pc-bios: s390x: Rename PSW_MASK_ZMODE to PSW_MASK_64
pc-bios: s390x: Get rid of magic offsets into the lowcore
pc-bios: s390x: Move sleep and yield to helper.h
pc-bios: s390x: Consolidate timing functions into time.h
pc-bios: s390x: cio.c cleanup and compile fix
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The FW_CFG_DATA_GENERATOR allows any object to produce
blob of data consumable by the fw_cfg device.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200623172726.21040-3-philmd@redhat.com>
|
|
The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way
to cast from an SSISlave* to the instance struct of a subtype of
TYPE_SSI_SLAVE. Switch to using the QOM cast macros instead, which
have the same effect (by writing the QOM macros if the types were
previously missing them.)
(The FROM_SSI_SLAVE() macro allows the SSISlave member of the
subtype's struct to be anywhere as long as it is named "ssidev",
whereas a QOM cast macro insists that it is the first thing in the
subtype's struct. This is true for all the types we convert here.)
This removes all the uses of FROM_SSI_SLAVE() so we can delete the
definition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-18-peter.maydell@linaro.org
|
|
The QOM types "spitz-lcdtg" and "corgi-ssp" are missing the
usual QOM TYPE and casting macros; provide and use them.
In particular, we can safely use the QOM cast macros instead of
FROM_SSI_SLAVE() because in both cases the 'ssidev' field of
the instance state struct is the first field in it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-17-peter.maydell@linaro.org
|
|
Instead of using printf() for logging guest accesses to invalid
register offsets in the pxa2xx PIC device, use the usual
qemu_log_mask(LOG_GUEST_ERROR,...).
This was the only user of the REG_FMT macro in pxa.h, so we can
remove that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-16-peter.maydell@linaro.org
|
|
Instead of logging guest accesses to invalid register offsets in the
Spitz flash device with zaurus_printf() (which just prints to stderr),
use the usual qemu_log_mask(LOG_GUEST_ERROR,...).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-15-peter.maydell@linaro.org
|
|
Instead of logging guest accesses to invalid register offsets in this
device using zaurus_printf() (which just prints to stderr), use the
usual qemu_log_mask(LOG_GUEST_ERROR,...).
Since this was the only use of the zaurus_printf() macro outside
spitz.c, we can move the definition of that macro from sharpsl.h
to spitz.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-14-peter.maydell@linaro.org
|
|
Currently we have a free-floating set of IRQs and a function
spitz_out_switch() which handle some miscellaneous GPIO lines for the
spitz board. Encapsulate this behaviour in a simple QOM device.
At this point we can finally remove the 'max1111' global, because the
ADC battery-temperature value is now handled by the misc-gpio device
writing the value to its outbound "adc-temp" GPIO, which the board
code wires up to the appropriate inbound GPIO line on the max1111.
This commit also fixes Coverity issue CID 1421913 (which pointed out
that the 'outsignals' in spitz_scoop_gpio_setup() were leaked),
because it removes the use of the qemu_allocate_irqs() API from this
code entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-13-peter.maydell@linaro.org
|
|
Create a header file for the hw/misc/max111x device, in the
usual modern style for QOM devices:
* definition of the TYPE_ constants and macros
* definition of the device's state struct so that it can
be embedded in other structs if desired
* documentation of the interface
This allows us to use TYPE_MAX_1111 in the spitz.c code rather
than the string "max1111".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-12-peter.maydell@linaro.org
|
|
The max111x ADC device model allows other code to set the level on
the 8 ADC inputs using the max111x_set_input() function. Replace
this with generic qdev GPIO inputs, which also allow inputs to be set
to arbitrary values.
Using GPIO lines will make it easier for board code to wire things
up, so that if device A wants to set the ADC input it doesn't need to
have a direct pointer to the max111x but can just set that value on
its output GPIO, which is then wired up by the board to the
appropriate max111x input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-11-peter.maydell@linaro.org
|
|
Use the new max111x qdev properties to set the initial input
values rather than calling max111x_set_input(); this means that
on system reset the inputs will correctly return to their initial
values.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-10-peter.maydell@linaro.org
|
|
Add an ssi_realize_and_unref(), for the benefit of callers
who want to be able to create an SSI device, set QOM properties
on it, and then do the realize-and-unref afterwards.
The API works on the same principle as the recently added
qdev_realize_and_undef(), sysbus_realize_and_undef(), etc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-9-peter.maydell@linaro.org
|
|
The max111x is a proper qdev device; we can use dc->vmsd rather than
directly calling vmstate_register().
It's possible that this is a migration compat break, but the only
boards that use this device are the spitz-family ('akita', 'borzoi',
'spitz', 'terrier').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-8-peter.maydell@linaro.org
|
|
Add some QOM properties to the max111x ADC device to allow the
initial values to be configured. Currently this is done by
board code calling max111x_set_input() after it creates the
device, which doesn't work on system reset.
This requires us to implement a reset method for this device,
so while we're doing that make sure we reset the other parts
of the device state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-7-peter.maydell@linaro.org
|
|
Currently the Spitz board uses a nasty hack for the GPIO lines
that pass "bit5" and "power" information to the LCD controller:
the lcdtg realize function sets a global variable to point to
the instance it just realized, and then the functions spitz_bl_power()
and spitz_bl_bit5() use that to find the device they are changing
the internal state of. There is a comment reading:
FIXME: Implement GPIO properly and remove this hack.
which was added in 2009.
Implement GPIO properly and remove this hack.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-6-peter.maydell@linaro.org
|
|
Keep pointers to scp0, scp1 in SpitzMachineState, and just pass
that to spitz_scoop_gpio_setup().
(We'll want to use some of the other fields in SpitzMachineState
in that function in the next commit.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-5-peter.maydell@linaro.org
|
|
Keep pointers to the MPU and the SSI devices in SpitzMachineState.
We're going to want to make GPIO connections between some of the
SSI devices and the SCPs, so we want to keep hold of a pointer to
those; putting the MPU into the struct allows us to pass just
one thing to spitz_ssp_attach() rather than two.
We have to retain the setting of the global "max1111" variable
for the moment as it is used in spitz_adc_temp_on(); later in
this series of commits we will be able to remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-4-peter.maydell@linaro.org
|
|
For the four Spitz-family machines (akita, borzoi, spitz, terrier)
create a proper abstract class SpitzMachineClass which encapsulates
the common behaviour, rather than having them all derive directly
from TYPE_MACHINE:
* instead of each machine class setting mc->init to a wrapper
function which calls spitz_common_init() with parameters,
put that data in the SpitzMachineClass and make spitz_common_init
the SpitzMachineClass machine-init function
* move the settings of mc->block_default_type and
mc->ignore_memory_transaction_failures into the SpitzMachineClass
class init rather than repeating them in each machine's class init
(The motivation is that we're going to want to keep some state in
the SpitzMachineState so we can connect GPIOs between devices created
in one sub-function of the machine init to devices created in a
different sub-function.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-3-peter.maydell@linaro.org
|
|
The spitz board has been around a long time, and still has a fair number
of hard-coded tab characters in it. We're about to do some work on
this source file, so start out by expanding out the tabs.
This commit is a pure whitespace only change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-2-peter.maydell@linaro.org
|
|
In bcm2835_fb_mbox_push(), Coverity complains (CID 1429989) that we
pass a pointer to a local struct to another function without
initializing all its fields. This is a real bug:
bcm2835_fb_reconfigure() copies the whole of our new BCM2385FBConfig
struct into s->config, so any fields we don't initialize will corrupt
the state of the device.
Copy the two fields which we don't want to update (pixo and alpha)
from the existing config so we don't accidentally change them.
Fixes: cfb7ba983857e40e88
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628195436.27582-1-peter.maydell@linaro.org
|
|
The flash device is exclusively for the host-controlled firmware, so
we should not expose it to the OS. Exposing it risks the OS messing
with it, which could break firmware runtime services and surprise the
OS when all its changes disappear after reboot.
As firmware needs the device and uses DT, we leave the device exposed
there. It's up to firmware to remove the nodes from DT before sending
it on to the OS. However, there's no need to force firmware to remove
tables from ACPI (which it doesn't know how to do anyway), so we
simply don't add the tables in the first place. But, as we've been
adding the tables for quite some time and don't want to change the
default hardware exposed to versioned machines, then we only stop
exposing the flash device tables for 5.1 and later machine types.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200629140938.17566-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
At the moment the virtio-iommu translates MSI transactions.
This behavior is inherited from ARM SMMU. The virt machine
code knows where the guest MSI doorbells are so we can easily
declare those regions as VIRTIO_IOMMU_RESV_MEM_T_MSI. With that
setting the guest will not map MSIs through the IOMMU and those
transactions will be simply bypassed.
Depending on which MSI controller is in use (ITS or GICV2M),
we declare either:
- the ITS interrupt translation space (ITS_base + 0x10000),
containing the GITS_TRANSLATOR or
- The GICV2M single frame, containing the MSI_SETSP_NS register.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200629070404.10969-6-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The machine may need to pass reserved regions to the
virtio-iommu-pci device (such as the MSI window on x86
or the MSI doorbells on ARM).
So let's add an array of Interval properties.
Note: if some reserved regions are already set by the
machine code - which should be the case in general -,
the length of the property array is already set and
prevents the end-user from modifying them. For example,
attempting to use:
-device virtio-iommu-pci,\
len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1
would result in the following error message:
qemu-system-aarch64: -device virtio-iommu-pci,addr=0xa,
len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1:
array size property len-reserved-regions may not be set more than once
Otherwise, for example, adding two reserved regions is achieved
using the following options:
-device virtio-iommu-pci,addr=0xa,len-reserved-regions=2,\
reserved-regions[0]=0xfee00000:0xfeefffff:1,\
reserved-regions[1]=0x1000000:100ffff:1
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20200629070404.10969-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When translating an address we need to check if it belongs to
a reserved virtual address range. If it does, there are 2 cases:
- it belongs to a RESERVED region: the guest should neither use
this address in a MAP not instruct the end-point to DMA on
them. We report an error
- It belongs to an MSI region: we bypass the translation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch implements the PROBE request. At the moment,
only THE RESV_MEM property is handled. The first goal is
to report iommu wide reserved regions such as the MSI regions
set by the machine code. On x86 this will be the IOAPIC MSI
region, [0xFEE00000 - 0xFEEFFFFF], on ARM this may be the ITS
doorbell.
In the future we may introduce per device reserved regions.
This will be useful when protecting host assigned devices
which may expose their own reserved regions
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Introduce a new property defining a reserved region:
<low address>:<high address>:<type>.
This will be used to encode reserved IOVA regions.
For instance, in virtio-iommu use case, reserved IOVA regions
will be passed by the machine code to the virtio-iommu-pci
device (an array of those). The type of the reserved region
will match the virtio_iommu_probe_resv_mem subtype value:
- VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
- VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
on PC/Q35 machine, this will be used to inform the
virtio-iommu-pci device it should bypass the MSI region.
The reserved region will be: 0xfee00000:0xfeefffff:1.
On ARM, we can declare the ITS MSI doorbell as an MSI
region to prevent MSIs from being mapped on guest side.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The i.MX6UL EVK 14x14 board uses:
- PHY 2 for FEC 1
- PHY 1 for FEC 2
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: fb41992126c091a71d76ab3d1898959091f60583.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add properties to the i.MX6UL processor to be able to select a
particular PHY on the MDIO bus for each FEC device.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: ea1d604198b6b73ea6521676e45bacfc597aba53.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We need a solution to use an Ethernet PHY that is not the first device
on the MDIO bus (device 0 on MDIO bus).
As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but
only one MDIO bus on which the 2 related PHY are connected but at unique
addresses.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch introduces set_config & get_config method which allows
vhost_net set/get the config to backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-13-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
use the vhost_force_iommu callback to force enable feature bit VIRTIO_F_IOMMU_PLATFORM
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-12-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
use vhost_vq_get_addr callback to get the vq address from backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-10-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
use the vhost_dev_start callback to send the status to backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-8-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Add the check of vhost_set_iotlb_callback
before calling
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-6-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
With version 1, we can detect whether a queue is enabled via
queue_enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-5-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This patch introduces queue_enabled() method which allows the
transport to implement its own way to report whether or not a queue is
enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
user the qemu_get_peer to replace the old process
Signed-off-by: Cindy Lu <lulu@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200701145538.22333-3-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Let's auto-enable it also when maxmem is specified but no slots are
defined. This will result in us properly creating ACPI srat tables,
indicating the maximum possible PFN to the guest OS. Based on this, e.g.,
Linux will enable the swiotlb properly.
This avoids having to manually force the switolb on (swiotlb=force) in
Linux in case we're booting only using DMA memory (e.g., 2GB on x86-64),
and virtio-mem adds memory later on that really needs the swiotlb to be
used for DMA.
Let's take care of backwards compatibility if somebody has a setup that
specifies "maxram" without "slots".
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Sergio Lopez <slp@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-arm@nongnu.org <qemu-arm@nongnu.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-22-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The content of unplugged memory is undefined and should not be migrated,
ever. Exclude all unplugged memory during precopy using the precopy notifier
infrastructure introduced for free page hinting in virtio-balloon.
Unplugged memory is marked as "not dirty", meaning it won't be
considered for migration.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-21-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's add some trace events that might come in handy later.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-20-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We want to make sure that certain properties don't change during
migration, especially to catch user errors in a nice way. Let's migrate
a temporary structure and validate that the properties didn't change.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-19-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's register the notifier and trigger the qapi event with the right
device id.
MEMORY_DEVICE_SIZE_CHANGE is similar to BALLOON_CHANGE, however on a
memory device level.
Don't unregister the notifier (we neither have finalize() nor unrealize()
for VirtIOPCIProxy, so it's not that simple to do it) - both devices are
expected to vanish at the same time.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-18-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We want to send qapi events in case the size of a virtio-mem device
changes. This allows upper layers to always know how much memory is
actually currently consumed via a virtio-mem device.
Unfortuantely, we have to report the id of our proxy device. Let's provide
an easy way for our proxy device to register, so it can send the qapi
events. Piggy-backing on the notifier infrastructure (although we'll
only ever have one notifier registered) seems to be an easy way.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-17-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's wire it up similar to virtio-pmem. Also disallow unplug, so it's
harder for users to shoot themselves into the foot.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-16-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Account the memory to the configured nid.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-15-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's add a proxy for virtio-mem, make it a memory device, and
pass-through the properties.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-12-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is the very basic/initial version of virtio-mem. An introduction to
virtio-mem can be found in the Linux kernel driver [1]. While it can be
used in the current state for hotplug of a smaller amount of memory, it
will heavily benefit from resizeable memory regions in the future.
Each virtio-mem device manages a memory region (provided via a memory
backend). After requested by the hypervisor ("requested-size"), the
guest can try to plug/unplug blocks of memory within that region, in order
to reach the requested size. Initially, and after a reboot, all memory is
unplugged (except in special cases - reboot during postcopy).
The guest may only try to plug/unplug blocks of memory within the usable
region size. The usable region size is a little bigger than the
requested size, to give the device driver some flexibility. The usable
region size will only grow, except on reboots or when all memory is
requested to get unplugged. The guest can never plug more memory than
requested. Unplugged memory will get zapped/discarded, similar to in a
balloon device.
The block size is variable, however, it is always chosen in a way such that
THP splits are avoided (e.g., 2MB). The state of each block
(plugged/unplugged) is tracked in a bitmap.
As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now
expose "VirtioMEMDeviceInfo" via "query-memory-devices".
--------------------------------------------------------------------------
There are two important follow-up items that are in the works:
1. Resizeable memory regions: Use resizeable allocations/RAM blocks to
grow/shrink along with the usable region size. This avoids creating
initially very big VMAs, RAM blocks, and KVM slots.
2. Protection of unplugged memory: Make sure the gust cannot actually
make use of unplugged memory.
Other follow-up items that are in the works:
1. Exclude unplugged memory during migration (via precopy notifier).
2. Handle remapping of memory.
3. Support for other architectures.
--------------------------------------------------------------------------
Example usage (virtio-mem-pci is introduced in follow-up patches):
Start QEMU with two virtio-mem devices (one per NUMA node):
$ qemu-system-x86_64 -m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
[...]
-object memory-backend-ram,id=mem0,size=8G \
-device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \
-object memory-backend-ram,id=mem1,size=8G \
-device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G
Query the configuration:
(qemu) info memory-devices
Memory device [virtio-mem]: "vm0"
memaddr: 0x140000000
node: 0
requested-size: 0
size: 0
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem0
Memory device [virtio-mem]: "vm1"
memaddr: 0x340000000
node: 1
requested-size: 1073741824
size: 1073741824
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem1
Add some memory to node 0:
(qemu) qom-set vm0 requested-size 500M
Remove some memory from node 1:
(qemu) qom-set vm1 requested-size 200M
Query the configuration again:
(qemu) info memory-devices
Memory device [virtio-mem]: "vm0"
memaddr: 0x140000000
node: 0
requested-size: 524288000
size: 524288000
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem0
Memory device [virtio-mem]: "vm1"
memaddr: 0x340000000
node: 1
requested-size: 209715200
size: 209715200
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem1
[1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-11-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The atomic_cmpxchg() loop is broken because we occasionally end up with
old and _old having different values (a legit compiler can generate code
that accessed *ind_addr again to pick up a value for _old instead of
using the value of old that was already fetched according to the
rules of the abstract machine). This means the underlying CS instruction
may use a different old (_old) than the one we intended to use if
atomic_cmpxchg() performed the xchg part.
Let us use volatile to force the rules of the abstract machine for
accesses to *ind_addr. Let us also rewrite the loop so, we that the
new old is used to compute the new desired value if the xchg part
is not performed.
Fixes: 8cba80c3a0 ("s390: Add PCI bus support")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200616045035.51641-3-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
