aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2020-01-07hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35Denis Plotnikov
5.0 machine type uses 4.2 compats. This seems to be incorrect, since the latests machine type by now is 5.0 and it should use its own compat or shouldn't use any relying on the defaults. Seems, like this appeared because of some problems on merge/rebase. Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20191223072856.5369-1-dplotnikov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-06vfio/pci: Don't remove irqchip notifier if not registeredPeter Xu
The kvm irqchip notifier is only registered if the device supports INTx, however it's unconditionally removed. If the assigned device does not support INTx, this will cause QEMU to crash when unplugging the device from the system. Change it to conditionally remove the notifier only if the notify hook is setup. CC: Eduardo Habkost <ehabkost@redhat.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Alex Williamson <alex.williamson@redhat.com> Cc: qemu-stable@nongnu.org # v4.2 Reported-by: yanghliu@redhat.com Debugged-by: Eduardo Habkost <ehabkost@redhat.com> Fixes: c5478fea27ac ("vfio/pci: Respond to KVM irqchip change notifier") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1782678 Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-06Merge remote-tracking branch ↵Peter Maydell
'remotes/elmarco/tags/dbus-vmstate7-pull-request' into staging Add dbus-vmstate Hi, With external processes or helpers participating to the VM support, it becomes necessary to handle their migration. Various options exist to transfer their state: 1) as the VM memory, RAM or devices (we could say that's how vhost-user devices can be handled today, they are expected to restore from ring state) 2) other "vmstate" (as with TPM emulator state blobs) 3) left to be handled by management layer 1) is not practical, since an external processes may legitimatelly need arbitrary state date to back a device or a service, or may not even have an associated device. 2) needs ad-hoc code for each helper, but is simple and working 3) is complicated for management layer, QEMU has the migration timing The proposed "dbus-vmstate" object will connect to a given D-Bus address, and save/load from org.qemu.VMState1 owners on migration. Thus helpers can easily have their state migrated with QEMU, without implementing ad-hoc support (such as done for TPM emulation) D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to work on various other OSes. There are several implementations and good bindings for various languages. (the tests/dbus-vmstate-test.c is a good example of how simple the implementation of services can be, even in C) dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use a slirp helper process". v2: - fix build with broken mingw-glib # gpg: Signature made Mon 06 Jan 2020 14:43:35 GMT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/dbus-vmstate7-pull-request: tests: add dbus-vmstate-test tests: add migration-helpers unit dockerfiles: add dbus-daemon to some of latest distributions configure: add GDBUS_CODEGEN Add dbus-vmstate object util: add dbus helper unit docs: start a document to describe D-Bus usage vmstate: replace DeviceState with VMStateIf vmstate: add qom interface to get id Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-06intel_iommu: add present bit check for pasid table entriesLiu Yi L
The present bit check for pasid entry (pe) and pasid directory entry (pdire) were missed in previous commits as fpd bit check doesn't require present bit as "Set". This patch adds the present bit check for callers which wants to get a valid pe/pdire. Cc: qemu-stable@nongnu.org Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Yi Sun <yi.y.sun@linux.intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Message-Id: <1578058086-4288-3-git-send-email-yi.l.liu@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06intel_iommu: a fix to vtd_find_as_from_bus_num()Liu Yi L
Ensure the return value of vtd_find_as_from_bus_num() is NULL by enforcing vtd_bus=NULL. This would help caller of vtd_find_as_from_bus_num() to decide if any further operation on the returned vtd_bus. Cc: qemu-stable@nongnu.org Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Yi Sun <yi.y.sun@linux.intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Message-Id: <1578058086-4288-2-git-send-email-yi.l.liu@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06virtio-net: delete also control queue when TX/RX deletedYuri Benditovich
https://bugzilla.redhat.com/show_bug.cgi?id=1708480 If the control queue is not deleted together with TX/RX, it later will be ignored in freeing cache resources and hot unplug will not be completed. Cc: qemu-stable@nongnu.org Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Message-Id: <20191226043649.14481-3-yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06virtio: reset region cache when on queue deletionYuri Benditovich
https://bugzilla.redhat.com/show_bug.cgi?id=1708480 Fix leak of region reference that prevents complete device deletion on hot unplug. Cc: qemu-stable@nongnu.org Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Message-Id: <20191226043649.14481-2-yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06virtio-mmio: update queue size on guest writeDenis Plotnikov
Some guests read back queue size after writing it. Always update the on size write otherwise they might be confused. Cc: qemu-stable@nongnu.org Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20191224081446.17003-1-dplotnikov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06virtio: make seg_max virtqueue size dependentDenis Plotnikov
Before the patch, seg_max parameter was immutable and hardcoded to 126 (128 - 2) without respect to queue size. This has two negative effects: 1. when queue size is < 128, we have Virtio 1.1 specfication violation: (2.6.5.3.1 Driver Requirements) seq_max must be <= queue_size. This violation affects the old Linux guests (ver < 4.14). These guests crash on these queue_size setups. 2. when queue_size > 128, as was pointed out by Denis Lunev <den@virtuozzo.com>, seg_max restrics guest's block request length which affects guests' performance making them issues more block request than needed. https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html To mitigate this two effects, the patch adds the property adjusting seg_max to queue size automaticaly. Since seg_max is a guest visible parameter, the property is machine type managable and allows to choose between old (seg_max = 126 always) and new (seg_max = queue_size - 2) behaviors. Not to change the behavior of the older VMs, prevent setting the default seg_max_adjust value for older machine types. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20191220140905.1718-2-dplotnikov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/audio-20200106-pull-request' into staging audio: bugfixes. # gpg: Signature made Mon 06 Jan 2020 12:51:15 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20200106-pull-request: audio: fix integer overflow paaudio: wait until the recording stream is ready paaudio: try to drain the recording stream paaudio: drop recording stream in qpa_fini_in hda-codec: fix recording rate control hda-codec: fix playback rate control Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-06Merge remote-tracking branch 'remotes/elmarco/tags/screendump-pull-request' ↵Peter Maydell
into staging console: screendump improvements Hi, The following patches have been extracted from the "[PATCH v6 00/25] monitor: add asynchronous command type", as they are reviewable/mergeable independantly. They introduce some internal API changes, and fix qemu_open()/qemu_close()/unlink() misusages which should be quite harmless. # gpg: Signature made Fri 03 Jan 2020 09:07:51 GMT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/screendump-pull-request: screendump: use qemu_unlink() osdep: add qemu_unlink() screendump: replace FILE with QIOChannel and fix close()/qemu_close() object: add g_autoptr support ui: add pixman image g_autoptr support ppm-save: pass opened fd console: add graphic_hw_update_done() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-06vmstate: replace DeviceState with VMStateIfMarc-André Lureau
Replace DeviceState dependency with VMStateIf on vmstate API. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com>
2020-01-06vmstate: add qom interface to get idMarc-André Lureau
Add an interface to get the instance id, instead of depending on Device and qdev_get_dev_path(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-06Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86 and machine queue, 2019-12-20 Bug fix: * Resolve CPU models to v1 by default (Eduardo Habkost) Cleanup: * Remove incorrect numa_mem_supported checks (Igor Mammedov) # gpg: Signature made Fri 20 Dec 2019 19:19:02 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: numa: properly check if numa is supported numa: remove not needed check i386: Resolve CPU models to v1 by default Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-06hda-codec: fix recording rate controlVolker Rümelin
Apply previous commit to hda_audio_input_cb for the same reasons. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200104091122.13971-2-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-06hda-codec: fix playback rate controlVolker Rümelin
Since commit 1930616b98 "audio: make mixeng optional" the function hda_audio_output_cb can no longer assume the function parameter avail contains the free buffer size. With the playback mixing-engine turned off this leads to a broken playback rate control and playback buffer drops in regular intervals. This patch moves down the rate calculation, so the correct buffer fill level is used for the calculation. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200104091122.13971-1-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-05hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35Denis Plotnikov
5.0 machine type uses 4.2 compats. This seems to be incorrect, since the latests machine type by now is 5.0 and it should use its own compat or shouldn't use any relying on the defaults. Seems, like this appeared because of some problems on merge/rebase. Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20191223072856.5369-1-dplotnikov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05vhost-user-scsi: reset the device if supportedRaphael Norwitz
If the vhost-user-scsi backend supports the VHOST_USER_F_RESET_DEVICE protocol feature, then the device can be reset when requested. If this feature is not supported, do not try a reset as this will send a VHOST_USER_RESET_OWNER that the backend is not expecting, potentially putting into an inoperable state. Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1572385083-5254-3-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05vhost-user: add VHOST_USER_RESET_DEVICE to reset devicesRaphael Norwitz
Add a VHOST_USER_RESET_DEVICE message which will reset the vhost user backend. Disabling all rings, and resetting all internal state, ready for the backend to be reinitialized. A backend has to report it supports this features with the VHOST_USER_PROTOCOL_F_RESET_DEVICE protocol feature bit. If it does so, the new message is used instead of sending a RESET_OWNER which has had inconsistent implementations. Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1572385083-5254-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argumentPhilippe Mathieu-Daudé
Both functions are called by MemoryRegionOps.[read/write] handlers with unsigned 'size' argument. Both functions call pci_host_config_[read/write]_common() which expect a uint32_t 'len' parameter (also unsigned). Since it is pointless (and confuse) to use a signed value, use a unsigned type. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191216002134.18279-3-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hw/pci/pci_host: Remove redundant PCI_DPRINTF()Philippe Mathieu-Daudé
In commit 3bf4dfdd111 we introduced the pci_cfg_[read/write] trace events in pci_host_config_[read/write]_common(). We have the following call trace: pci_host_data_[read/write]() - PCI_DPRINTF() - pci_data_[read/write]() - PCI_DPRINTF() - pci_host_config_[read/write]_common() trace_pci_cfg_[read/write]() Since the PCI_DPRINTF() calls are redundant with the trace events, remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191216002134.18279-2-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-mmio: Clear v2 transport state on soft resetJean-Philippe Brucker
At the moment when the guest writes a status of 0, we only reset the virtio core state but not the virtio-mmio state. The virtio-mmio specification says (v1.1 cs01, 4.2.2.1 Device Requirements: MMIO Device Register Layout): Upon reset, the device MUST clear all bits in InterruptStatus and ready bits in the QueueReady register for all queues in the device. The core already takes care of InterruptStatus by clearing isr, but we still need to clear QueueReady. It would be tempting to clean all registers, but since the specification doesn't say anything more, guests could rely on the registers keeping their state across reset. Linux for example, relies on this for GuestPageSize in the legacy MMIO tranport. Fixes: 44e687a4d9ab ("virtio-mmio: implement modern (v2) personality (virtio-1)") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-Id: <20191213095410.1516119-1-jean-philippe@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hmat acpi: Build Memory Side Cache Information Structure(s)Liu Jingqi
This structure describes memory side cache information for memory proximity domains if the memory side cache is present and the physical device forms the memory side cache. The software could use this information to effectively place the data in memory to maximize the performance of the system memory that use the memory side cache. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-7-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)Liu Jingqi
This structure describes the memory access latency and bandwidth information from various memory access initiator proximity domains. The latency and bandwidth numbers represented in this structure correspond to rated latency and bandwidth for the platform. The software could use this information as hint for optimization. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-6-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hmat acpi: Build Memory Proximity Domain Attributes Structure(s)Liu Jingqi
HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table (HMAT). The specification references below link: http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf It describes the memory attributes, such as memory side cache attributes and bandwidth and latency details, related to the Memory Proximity Domain. The software is expected to use this information as hint for optimization. This structure describes Memory Proximity Domain Attributes by memory subsystem and its associativity with processor proximity domain as well as hint for memory usage. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-5-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05numa: Extend CLI to provide memory side cache informationLiu Jingqi
Add -numa hmat-cache option to provide Memory Side Cache Information. These memory attributes help to build Memory Side Cache Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-cache option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-4-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide memory latency and bandwidth informationLiu Jingqi
Add -numa hmat-lb option to provide System Locality Latency and Bandwidth Information. These memory attributes help to build System Locality Latency and Bandwidth Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-lb option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-3-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide initiator information for numa nodesTao Xu
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT), The initiator represents processor which access to memory. And in 5.2.27.3 Memory Proximity Domain Attributes Structure, the attached initiator is defined as where the memory controller responsible for a memory proximity domain. With attached initiator information, the topology of heterogeneous memory can be described. Add new machine property 'hmat' to enable all HMAT specific options. Extend CLI of "-numa node" option to indicate the initiator numa node-id. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Before using initiator option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-2-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio: don't enable notifications during pollingStefan Hajnoczi
Virtqueue notifications are not necessary during polling, so we disable them. This allows the guest driver to avoid MMIO vmexits. Unfortunately the virtio-blk and virtio-scsi handler functions re-enable notifications, defeating this optimization. Fix virtio-blk and virtio-scsi emulation so they leave notifications disabled. The key thing to remember for correctness is that polling always checks one last time after ending its loop, therefore it's safe to lose the race when re-enabling notifications at the end of polling. There is a measurable performance improvement of 5-10% with the null-co block driver. Real-life storage configurations will see a smaller improvement because the MMIO vmexit overhead contributes less to latency. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20191209210957.65087-1-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-pci: disable vring processing when bus-mastering is disabledMichael Roth
Currently the SLOF firmware for pseries guests will disable/re-enable a PCI device multiple times via IO/MEM/MASTER bits of PCI_COMMAND register after the initial probe/feature negotiation, as it tends to work with a single device at a time at various stages like probing and running block/network bootloaders without doing a full reset in-between. In QEMU, when PCI_COMMAND_MASTER is disabled we disable the corresponding IOMMU memory region, so DMA accesses (including to vring fields like idx/flags) will no longer undergo the necessary translation. Normally we wouldn't expect this to happen since it would be misbehavior on the driver side to continue driving DMA requests. However, in the case of pseries, with iommu_platform=on, we trigger the following sequence when tearing down the virtio-blk dataplane ioeventfd in response to the guest unsetting PCI_COMMAND_MASTER: #2 0x0000555555922651 in virtqueue_map_desc (vdev=vdev@entry=0x555556dbcfb0, p_num_sg=p_num_sg@entry=0x7fffe657e1a8, addr=addr@entry=0x7fffe657e240, iov=iov@entry=0x7fffe6580240, max_num_sg=max_num_sg@entry=1024, is_write=is_write@entry=false, pa=0, sz=0) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:757 #3 0x0000555555922a89 in virtqueue_pop (vq=vq@entry=0x555556dc8660, sz=sz@entry=184) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:950 #4 0x00005555558d3eca in virtio_blk_get_request (vq=0x555556dc8660, s=0x555556dbcfb0) at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:255 #5 0x00005555558d3eca in virtio_blk_handle_vq (s=0x555556dbcfb0, vq=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:776 #6 0x000055555591dd66 in virtio_queue_notify_aio_vq (vq=vq@entry=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1550 #7 0x000055555591ecef in virtio_queue_notify_aio_vq (vq=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1546 #8 0x000055555591ecef in virtio_queue_host_notifier_aio_poll (opaque=0x555556dc86c8) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:2527 #9 0x0000555555d02164 in run_poll_handlers_once (ctx=ctx@entry=0x55555688bfc0, timeout=timeout@entry=0x7fffe65844a8) at /home/mdroth/w/qemu.git/util/aio-posix.c:520 #10 0x0000555555d02d1b in try_poll_mode (timeout=0x7fffe65844a8, ctx=0x55555688bfc0) at /home/mdroth/w/qemu.git/util/aio-posix.c:607 #11 0x0000555555d02d1b in aio_poll (ctx=ctx@entry=0x55555688bfc0, blocking=blocking@entry=true) at /home/mdroth/w/qemu.git/util/aio-posix.c:639 #12 0x0000555555d0004d in aio_wait_bh_oneshot (ctx=0x55555688bfc0, cb=cb@entry=0x5555558d5130 <virtio_blk_data_plane_stop_bh>, opaque=opaque@entry=0x555556de86f0) at /home/mdroth/w/qemu.git/util/aio-wait.c:71 #13 0x00005555558d59bf in virtio_blk_data_plane_stop (vdev=<optimized out>) at /home/mdroth/w/qemu.git/hw/block/dataplane/virtio-blk.c:288 #14 0x0000555555b906a1 in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38) at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:245 #15 0x0000555555b90dbb in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38) at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:237 #16 0x0000555555b92a8e in virtio_pci_stop_ioeventfd (proxy=0x555556db4e40) at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:292 #17 0x0000555555b92a8e in virtio_write_config (pci_dev=0x555556db4e40, address=<optimized out>, val=1048832, len=<optimized out>) at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:613 I.e. the calling code is only scheduling a one-shot BH for virtio_blk_data_plane_stop_bh, but somehow we end up trying to process an additional virtqueue entry before we get there. This is likely due to the following check in virtio_queue_host_notifier_aio_poll: static bool virtio_queue_host_notifier_aio_poll(void *opaque) { EventNotifier *n = opaque; VirtQueue *vq = container_of(n, VirtQueue, host_notifier); bool progress; if (!vq->vring.desc || virtio_queue_empty(vq)) { return false; } progress = virtio_queue_notify_aio_vq(vq); namely the call to virtio_queue_empty(). In this case, since no new requests have actually been issued, shadow_avail_idx == last_avail_idx, so we actually try to access the vring via vring_avail_idx() to get the latest non-shadowed idx: int virtio_queue_empty(VirtQueue *vq) { bool empty; ... if (vq->shadow_avail_idx != vq->last_avail_idx) { return 0; } rcu_read_lock(); empty = vring_avail_idx(vq) == vq->last_avail_idx; rcu_read_unlock(); return empty; but since the IOMMU region has been disabled we get a bogus value (0 usually), which causes virtio_queue_empty() to falsely report that there are entries to be processed, which causes errors such as: "virtio: zero sized buffers are not allowed" or "virtio-blk missing headers" and puts the device in an error state. This patch works around the issue by introducing virtio_set_disabled(), which sets a 'disabled' flag to bypass checks like virtio_queue_empty() when bus-mastering is disabled. Since we'd check this flag at all the same sites as vdev->broken, we replace those checks with an inline function which checks for either vdev->broken or vdev->disabled. The 'disabled' flag is only migrated when set, which should be fairly rare, but to maintain migration compatibility we disable it's use for older machine types. Users requiring the use of the flag in conjunction with older machine types can set it explicitly as a virtio-device option. NOTES: - This leaves some other oddities in play, like the fact that DRIVER_OK also gets unset in response to bus-mastering being disabled, but not restored (however the device seems to continue working) - Similarly, we disable the host notifier via virtio_bus_stop_ioeventfd(), which seems to move the handling out of virtio-blk dataplane and back into the main IO thread, and it ends up staying there till a reset (but otherwise continues working normally) Cc: David Gibson <david@gibson.dropbear.id.au>, Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-Id: <20191120005003.27035-1-mdroth@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio: update queue size on guest writeMichael S. Tsirkin
Some guests read back queue size after writing it. Update the size immediatly upon write otherwise they get confused. In particular this is the case for seabios. Reported-by: Roman Kagan <rkagan@virtuozzo.com> Suggested-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05intel_iommu: fix bug to read DMAR_RTADDR_REGYi Sun
Should directly read DMAR_RTADDR_REG but not using 's->root'. Because 's->root' is modified in 'vtd_root_table_setup()' so that the first 12 bits are omitted. This causes the guest iommu debugfs cannot show pasid tables. Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Message-Id: <20191205095439.29114-1-yi.y.sun@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-input: convert to new virtio_delete_queueMichael S. Tsirkin
Seems cleaner than using VQ index values. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-serial-bus: fix memory leak while attach virtio-serial-busPan Nengyuan
ivqs/ovqs/c_ivq/c_ovq is forgot to cleanup in virtio_serial_device_unrealize, the memory leak stack is as bellow: Direct leak of 1290240 byte(s) in 180 object(s) allocated from: #0 0x7fc9bfc27560 in calloc (/usr/lib64/libasan.so.3+0xc7560) #1 0x7fc9bed6f015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015) #2 0x5650e02b83e7 in virtio_add_queue hw/virtio/virtio.c:2327 #3 0x5650e02847b5 in virtio_serial_device_realize hw/char/virtio-serial-bus.c:1089 #4 0x5650e02b56a7 in virtio_device_realize hw/virtio/virtio.c:3504 #5 0x5650e03bf031 in device_set_realized hw/core/qdev.c:876 #6 0x5650e0531efd in property_set_bool qom/object.c:2080 #7 0x5650e053650e in object_property_set_qobject qom/qom-qobject.c:26 #8 0x5650e0533e14 in object_property_set_bool qom/object.c:1338 #9 0x5650e04c0e37 in virtio_pci_realize hw/virtio/virtio-pci.c:1801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Cc: Laurent Vivier <lvivier@redhat.com> Cc: Amit Shah <amit@kernel.org> Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1575444716-17632-3-git-send-email-pannengyuan@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-balloon: fix memory leak while attach virtio-balloon devicePan Nengyuan
ivq/dvq/svq/free_page_vq is forgot to cleanup in virtio_balloon_device_unrealize, the memory leak stack is as follow: Direct leak of 14336 byte(s) in 2 object(s) allocated from: #0 0x7f99fd9d8560 in calloc (/usr/lib64/libasan.so.3+0xc7560) #1 0x7f99fcb20015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015) #2 0x557d90638437 in virtio_add_queue hw/virtio/virtio.c:2327 #3 0x557d9064401d in virtio_balloon_device_realize hw/virtio/virtio-balloon.c:793 #4 0x557d906356f7 in virtio_device_realize hw/virtio/virtio.c:3504 #5 0x557d9073f081 in device_set_realized hw/core/qdev.c:876 #6 0x557d908b1f4d in property_set_bool qom/object.c:2080 #7 0x557d908b655e in object_property_set_qobject qom/qom-qobject.c:26 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <1575444716-17632-2-git-send-email-pannengyuan@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2020-01-05virtio: make virtio_delete_queue idempotentMichael S. Tsirkin
Let's make sure calling this twice is harmless - no known instances, but seems safer. Suggested-by: Pan Nengyuan <pannengyuan@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio: add ability to delete vq through a pointerMichael S. Tsirkin
Devices tend to maintain vq pointers, allow deleting them trough a vq pointer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2020-01-03Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20191220' into staging target-arm queue: * Support emulating the generic timers at frequencies other than 62.5MHz * Various fixes for SMMUv3 emulation bugs * Improve assert error message for hflags mismatches * arm-powerctl: rebuild hflags after setting CP15 bits in arm_set_cpu_on() # gpg: Signature made Fri 20 Dec 2019 14:25:51 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20191220: arm/arm-powerctl: rebuild hflags after setting CP15 bits in arm_set_cpu_on() target/arm: Display helpful message when hflags mismatch hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word position hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro hw/arm/smmuv3: Align stream table base address to table size hw/arm/smmuv3: Check stream IDs against actual table LOG2SIZE hw/arm/smmuv3: Correct SMMU_BASE_ADDR_MASK value hw/arm/smmuv3: Apply address mask to linear strtab base address ast2600: Configure CNTFRQ at 1125MHz target/arm: Prepare generic timer for per-platform CNTFRQ target/arm: Abstract the generic timer frequency target/arm: Remove redundant scaling of nexttick Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-03Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Fri 20 Dec 2019 10:25:11 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: virtio-blk: fix out-of-bounds access to bitmap in notify_guest_bh docs: fix rst syntax errors in unbuilt docs virtio-blk: deprecate SCSI passthrough Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-03Merge remote-tracking branch 'remotes/kraxel/tags/vga-20191220-pull-request' ↵Peter Maydell
into staging vga: two little bugfixes. # gpg: Signature made Fri 20 Dec 2019 06:06:04 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20191220-pull-request: display/bochs-display: fix memory leak vhost-user-gpu: Drop trailing json comma Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-02console: add graphic_hw_update_done()Marc-André Lureau
Add a function to be called when a graphic update is done. Declare the QXL renderer as async: render_update_cookie_num counts the number of outstanding updates, and graphic_hw_update_done() is called when it reaches none. (note: this is preliminary work for asynchronous screendump support) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-20hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word positionSimon Veith
The smmuv3_record_event() function that generates the F_STE_FETCH error uses the EVT_SET_ADDR macro to record the fetch address, placing it in 32-bit words 4 and 5. The correct position for this address is in words 6 and 7, per the SMMUv3 Architecture Specification. Update the function to use the EVT_SET_ADDR2 macro instead, which is the macro intended for writing to these words. ref. ARM IHI 0070C, section 7.3.4. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-7-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macroSimon Veith
The bit offsets in the EVT_SET_ADDR2 macro do not match those specified in the ARM SMMUv3 Architecture Specification. In all events that use this macro, e.g. F_WALK_EABT, the faulting fetch address or IPA actually occupies the 32-bit words 6 and 7 in the event record contiguously, with the upper and lower unused bits clear due to alignment or maximum supported address bits. How many bits are clear depends on the individual event type. Update the macro to write to the correct words in the event record so that guest drivers can obtain accurate address information on events. ref. ARM IHI 0070C, sections 7.3.12 through 7.3.16. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-6-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Align stream table base address to table sizeSimon Veith
Per the specification, and as observed in hardware, the SMMUv3 aligns the SMMU_STRTAB_BASE address to the size of the table by masking out the respective least significant bits in the ADDR field. Apply this masking logic to our smmu_find_ste() lookup function per the specification. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-5-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Check stream IDs against actual table LOG2SIZESimon Veith
When checking whether a stream ID is in range of the stream table, we have so far been only checking it against our implementation limit (SMMU_IDR1_SIDSIZE). However, the guest can program the STRTAB_BASE_CFG.LOG2SIZE field to a size that is smaller than this limit. Check the stream ID against this limit as well to match the hardware behavior of raising C_BAD_STREAMID events in case the limit is exceeded. Also, ensure that we do not go one entry beyond the end of the table by checking that its index is strictly smaller than the table size. ref. ARM IHI 0070C, section 6.3.24. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-4-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Correct SMMU_BASE_ADDR_MASK valueSimon Veith
There are two issues with the current value of SMMU_BASE_ADDR_MASK: - At the lower end, we are clearing bits [4:0]. Per the SMMUv3 spec, we should also be treating bit 5 as zero in the base address. - At the upper end, we are clearing bits [63:48]. Per the SMMUv3 spec, only bits [63:52] must be explicitly treated as zero. Update the SMMU_BASE_ADDR_MASK value to mask out bits [63:52] and [5:0]. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-3-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Apply address mask to linear strtab base addressSimon Veith
In the SMMU_STRTAB_BASE register, the stream table base address only occupies bits [51:6]. Other bits, such as RA (bit [62]), must be masked out to obtain the base address. The branch for 2-level stream tables correctly applies this mask by way of SMMU_BASE_ADDR_MASK, but the one for linear stream tables does not. Apply the missing mask in that case as well so that the correct stream base address is used by guests which configure a linear stream table. Linux guests are unaffected by this change because they choose a 2-level stream table layout for the QEMU SMMUv3, based on the size of its stream ID space. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-2-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20ast2600: Configure CNTFRQ at 1125MHzAndrew Jeffery
This matches the configuration set by u-boot on the AST2600. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 080ca1267a09381c43cf3c50d434fb6c186f2b6e.1576215453.git-series.andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging Various testing and logging updates - test tci with Travis - enable multiarch testing in Travis - default to out-of-tree builds - make changing logfile safe via RCU - remove redundant tests - remove gtester test from docker - convert DEBUG_MMAP to tracepoints - remove hand rolled glob function - trigger tcg re-configure when needed # gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits) tests/tcg: ensure we re-configure if configure.sh is updated trace: replace hand-crafted pattern_glob with g_pattern_match_simple linux-user: convert target_munmap debug to a tracepoint linux-user: log page table changes under -d page linux-user: add target_mmap_complete tracepoint linux-user: convert target_mmap debug to tracepoint linux-user: convert target_mprotect debug to tracepoint travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry docker: gtester is no longer used Added tests for close and change of logfile. Add use of RCU for qemu_logfile. qemu_log_lock/unlock now preserves the qemu_logfile handle. Add a mutex to guarantee single writer to qemu_logfile handle. Cleaned up flow of code in qemu_set_log(), to simplify and clarify. Fix double free issue in qemu_set_log_filename(). ci: build out-of-tree travis.yml: Enable builds on arm64, ppc64le and s390x tests/test-util-filemonitor: Skip test on non-x86 Travis containers tests/hd-geo-test: Skip test when images can not be created iotests: Skip test 079 if it is not possible to create large files ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* More uses of RCU_READ_LOCK_GUARD (Dave, myself) * QOM doc improvments (Greg) * Cleanups from the Meson conversion (Marc-André) * Support for multiple -accel options (myself) * Many x86 machine cleanup (Philippe, myself) * tests/migration-test cleanup (Juan) * PC machine removal and next round of deprecation (Thomas) * kernel-doc integration (Peter, myself) # gpg: Signature made Wed 18 Dec 2019 01:35:02 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (87 commits) vga: cleanup mapping of VRAM for non-PCI VGA hw/display: Remove "rombar" hack from vga-pci and vmware_vga hw/pci: Remove the "command_serr_enable" property hw/audio: Remove the "use_broken_id" hack from the AC97 device hw/i386: Remove the deprecated machines 0.12 up to 0.15 hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge hw/pci-host/i440fx: Extract the IGD passthrough host bridge device hw/pci-host/i440fx: Use definitions instead of magic values hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE() hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h" hw/pci-host/i440fx: Correct the header description Fix some comment spelling errors. target/i386: remove unused pci-assign codes WHPX: refactor load library migration: check length directly to make sure the range is aligned memory: include MemoryListener documentation and some missing function parameters docs: add memory API reference memory.h: Silence kernel-doc complaints docs: Create bitops.rst as example of kernel-docs bitops.h: Silence kernel-doc complaints ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 04:08:39 +0000