aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2019-03-11machine: Move nvdimms state into struct MachineStateEric Auger
As NVDIMM support is looming for ARM and SPAPR, let's move the acpi_nvdimm_state to the generic machine struct instead of duplicating the same code in several machines. It is also renamed into nvdimms_state and becomes a pointer. nvdimm and nvdimm-persistence become generic machine options. They become guarded by a nvdimm_supported machine class member. We also add a description for those options. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190308182053.5487-3-eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11nvdimm: Rename AcpiNVDIMMState into NVDIMMStateEric Auger
As we intend to migrate the acpi_nvdimm_state into the base machine with a new dimms_state name, let's also rename the datatype. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308182053.5487-2-eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11audio: use qapi AudioFormat instead of audfmt_eKővágó, Zoltán
I had to include an enum for audio sampling formats into qapi, but that meant duplicating the audfmt_e enum. This patch replaces audfmt_e and associated values with the qapi generated AudioFormat enum. This patch is mostly a search-and-replace, except for switches where the qapi generated AUDIO_FORMAT_MAX caused problems. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11mips_fulong2e: Add on-board graphics chipBALATON Zoltan
Add (partial) emulation of the on-board GPU of the machine. This allows the PMON2000 firmware to run and should also work with Linux console but probably not with X yet. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Tested-by: Philippe Mathieu-Daude <philmd@redhat.com> Message-id: da6370b22e0352ee803d25d68a62ff32eebf06e2.1552152100.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11hw/display: Add basic ATI VGA emulationBALATON Zoltan
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and guests running on these and the PMON2000 firmware of the fulong2e expect this to be available. Fortunately these are very similar chips so they can be mostly emulated in the same device model. This patch adds basic emulation of these ATI VGA chips. While this is incomplete and currently only enough to run the MIPS firmware and get framebuffer output with Linux, it allows the fulong2e board to work more like the real hardware and having it in QEMU in this state provides a way to experiment with it and allows others to contribute to improve it. It is compiled for all archs but only the fulong2e (which currently has no display output at all) is set to use it by default (in a separate patch). Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com> Tested-by: Howard Spoelstra <hsp.cat7@gmail.com> Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11virtio-gpu: make virtio_gpu_reset staticGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190307080244.9011-4-kraxel@redhat.com
2019-03-11virtio-vga: fix reset.Gerd Hoffmann
Store reset handler of the parent class and just call that for a complete virtio reset. When taking the shortcut and calling virtio_gpu_reset() directly the generic virtio reset code (for virtqueues etc) will not be executed. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1597621 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190307080244.9011-3-kraxel@redhat.com
2019-03-11virtio: add class_size to VirtioPCIDeviceTypeInfoGerd Hoffmann
Needed when VirtioPCIClass subclasses have their own class struct with some extra fields. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190307080244.9011-2-kraxel@redhat.com
2019-03-09Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Fri 08 Mar 2019 16:53:34 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: iothread: document about why we need explicit aio_poll() iothread: push gcontext earlier in the thread_fn iothread: create main loop unconditionally iothread: create the gcontext unconditionally iothread: replace init_done_cond with a semaphore hw/block/virtio-blk: Clean req->dev repetitions MAINTAINERS: add missing support status fields Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-08Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2019-03-08' into staging - qtest fixes - Some generic clean-ups by Philippe - macOS CI testing via cirrus-ci.com # gpg: Signature made Fri 08 Mar 2019 08:58:47 GMT # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-03-08: cirrus.yml: Add macOS continuous integration task tests/bios-tables: Improve portability by searching bash in the $PATH vhost-user-test: fix leaks tests: Do not use "\n" in g_test_message() strings hw/devices: Remove unused TC6393XB_RAM definition hw: Remove unused 'hw/devices.h' include tests: Move qdict-test-data.txt to tests/data/qobject/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # tests/vhost-user-test.c
2019-03-07hw: Remove unused 'hw/devices.h' includePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-03-07xtensa-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07unicore32-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sparc64-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sparc-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sh4-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Note that USB_OHCI was missing (it was brought in via pci.mak, but r2d needs the sysbus version) and SERIAL is not used. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07s390x: express dependencies with KconfigThomas Huth
Instead of hard-coding all config switches in the config file default-configs/s390x-softmmu.mak, let's use the new Kconfig files to express the necessary dependencies: The S390_CCW_VIRTIO config switch for the "s390-ccw-virtio" machine now selects all non-optional devices. And since we already have the VIRTIO_PCI and VIRTIO_MMIO config switches for the other two virtio transports, this patch also introduces a new config switch VIRTIO_CCW for the third, s390x-specific virtio transport, so that all three virtio transports are now handled in the same way. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07riscv-softmmu.mak: replace CONFIG_* with Kconfig "select" directivesPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07or1k-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07nios2-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07moxie-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Moxie does not use VGA, ISA or RTC, and only has a memory-mapped serial port. Adjust for the correct dependencies. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07microblaze-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07m68k-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07lm32-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07hppa-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Note that the Dino board uses a memory mapped 16550 UART and therefore only CONFIG_SERIAL is needed, not CONFIG_SERIAL_ISA. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07cris-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07alpha-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the embedded machines with kconfigThomas Huth
This makes it much easier if the users want to disable some of the embedded machines for their builds. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the Sam460EX machines with kconfigThomas Huth
Most of the dependencies are now directly selected by the SAM460EX switch. We can drop CONFIG_VGA_CIRRUS since this device is already selected automatically when CONFIG_PCI_DEVICES is set. Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the Mac machines with kconfigThomas Huth
This will make it for example easier if the users want to disable one of the two machines for their builds. Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the 'prep' and '40p' machines with kconfigThomas Huth
Select the required devices in hw/ppc/Kconfig instead, so that ppc-softmmu.mak only contains the user-selectable PREP switch. Plug-in devices like NE2000_ISA are pulled in automatically by the Kconfig build system now. Cc: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc64: Express dependencies of 'pseries' and 'powernv' machines with kconfigThomas Huth
The POWERNV switch should always select ISA_IPMI_BT, then the other IPMI options are turned on automatically now. CONFIG_DIMM should always be selected by the pseries machine, which in turn depends on CONFIG_MEM_DEVICE since DIMM implements this interface. CONFIG_VIRTIO_VGA can be dropped from default-configs/ppc64-softmmu.mak completely since this device is already automatically enabled via hw/display/Kconfig now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i386-softmmu.mak: remove all CONFIG_* except boards definitionsYang Zhong
%-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ipmi: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sd: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ssi: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express SuperIO dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07tpm: express dependencies with KconfigPaolo Bonzini
This automatically removes the TPM backends from the binary altogether if no front-ends are selected. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07virtio: express virtio dependencies with KconfigYang Zhong
Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07vfio: express vfio dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07hyperv: express dependencies with kconfigYang Zhong
remove default-configs/hyperv.mak and make dependencies with Kconfig. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-41-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07display: express dependencies with kconfigYang Zhong
Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-40-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ptimer: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-39-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i386: express dependencies with KconfigPaolo Bonzini
This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07scsi: express dependencies with KconfigPaolo Bonzini
This automatically removes the SCSI subsystem from the binary altogether if no controllers are selected. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-34-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07block: fix recursion in hw/block/dataplanePaolo Bonzini
There are Xen files in hw/block/dataplane that should be compiled even if virtio-blk is disabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert usb.mak to KconfigPaolo Bonzini
Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert sound.mak to KconfigPaolo Bonzini
There is really nothing special in these devices; they are just ISA devices. Instead of including them for each target, set CONFIG_ISA_BUS to true, and make the devices default to present whenever ISA is available. More conversion of ISA devices will follow. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on ISA_BUS' \ `grep -lw $i hw/*/Kconfig` done < default-configs/sound.mak Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-32-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 10:12:34 +0000