aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2019-02-27i2c: Verify that the count passed in to smbus_eeprom_init() is validCorey Minyard
Keep someone from passing in a bogus number Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus_eeprom: Add a reset function to smbus_eepromCorey Minyard
Reset the contents to init data and reset the offset on a machine reset. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c:smbus_eeprom: Add vmstate handling to the smbus eepromCorey Minyard
Transfer the state of the EEPROM on a migration. This way the data remains consistent on migration. This required moving the actual data to a separate array and using the data provided in the init function as a separate initialization array, since a pointer property has to be a void * and the array needs to be uint8_t[]. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c:smbus_eeprom: Add a size constant for the smbus_eeprom sizeCorey Minyard
It was hard-coded to 256 in a number of places, create a constant for that. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c:smbus_eeprom: Add normal type name and cast to smbus_eeprom.cCorey Minyard
Create a type name and a cast macro and use those through the code. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c:smbus_slave: Add an SMBus vmstate structureCorey Minyard
There is no vmstate handling for SMBus, so no device sitting on SMBus can have a state transfer that works reliably. So add it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c:pm_smbus: Fix state transferCorey Minyard
Transfer the state information for the SMBus registers and internal data so it will work on a VM transfer. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c:pm_smbus: Fix pm_smbus handling of I2C block readCorey Minyard
The I2C block read function of pm_smbus was completely broken. It required doing some direct I2C handling because it didn't have a defined size, the OS code just reads bytes until it marks the transaction finished. This also required adjusting how the AMIBIOS workaround code worked, the I2C block mode was setting STS_HOST_BUSY during a transaction, so that bit could no longer be used to inform the host status read code to start the transaction. Create a explicit bool for that operation. Also, don't read the next byte from the device in byte-by-byte mode unless the OS is actually clearing the byte done bit. Just assuming that's what the OS is doing is a bad idea. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27boards.h: Ignore migration for SMBus devices on older machinesCorey Minyard
Migration capability is being added for pm_smbus and SMBus devices. This change will allow backwards compatibility to be kept when migrating back to an old qemu version. Add a bool to the machine class tho keep smbus migration from happening. Future changes will use this. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c:smbus: Make white space in switch statements consistentCorey Minyard
It had spaces between cases in some places and not others. Add a space for every one. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus_eeprom: Get rid of the quick commandCorey Minyard
It's not necessary, it won't be called if it's NULL. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus: Simplify read handlingCorey Minyard
There were two different read functions, and with the removal of the command passed in there is no functional difference. So remove one of them. With that you don't need one of the states, so that can be removed, too. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus: Simplify write operationCorey Minyard
There were two different write functions and the SMBus code kept track of the command. Keeping track of the command wasn't useful, in fact it wasn't quite correct for the eeprom_smbus code. And there is no need for two write functions. Just have one write function and the first byte in the buffer is the command. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus: Correct the working of quick commandsCorey Minyard
The logic of handling quick SMBus commands was wrong. If you get a finish event with no data, that's a quick command. Document the quick command while we are at it. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c: Don't check return value from i2c_recv()Corey Minyard
i2c_recv() cannot fail, so there is no need to check the return value. It also returns unt8_t, so comparing with < 0 is not meaningful. Fix up various I2C controllers to remove the unneeded code. Signed-off-by: Corey Minyard <cminyard@mvista.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-27arm:i2c: Don't mask return from i2c_recv()Corey Minyard
It can't fail, and now that it returns a uint8_t a 0xff mask is unnecessary. Signed-off-by: Corey Minyard <cminyard@mvista.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-27i2c: have I2C receive operation return uint8_tCorey Minyard
It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c: Split smbus into partsCorey Minyard
smbus.c and smbus.h had device side code, master side code, and smbus.h has some smbus_eeprom.c definitions. Split them into separate files. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-26Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - Block graph change fixes (avoid loops, cope with non-tree graphs) - bdrv_set_aio_context() related fixes - HMP snapshot commands: Use only tag, not the ID to identify snapshots - qmeu-img, commit: Error path fixes - block/nvme: Build fix for gcc 9 - MAINTAINERS updates - Fix various issues with bdrv_refresh_filename() - Fix various iotests - Include LUKS overhead in qemu-img measure for qcow2 - A fix for vmdk's image creation interface # gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (71 commits) iotests: Skip 211 on insufficient memory vmdk: false positive of compat6 with hwversion not set iotests: add LUKS payload overhead to 178 qemu-img measure test qcow2: include LUKS payload overhead in qemu-img measure iotests.py: s/_/-/g on keys in qmp_log() iotests: Let 045 be run concurrently iotests: Filter SSH paths iotests.py: Filter filename in any string value iotests.py: Add is_str() iotests: Fix 207 to use QMP filters for qmp_log iotests: Fix 232 for LUKS iotests: Remove superfluous rm from 232 iotests: Fix 237 for Python 2.x iotests: Re-add filename filters iotests: Test json:{} filenames of internal BDSs block: BDS options may lack the "driver" option block/null: Generate filename even with latency-ns block/curl: Implement bdrv_refresh_filename() block/curl: Harmonize option defaults block/nvme: Fix bdrv_refresh_filename() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-26hw/usb: switch MTP to use new inotify APIsDaniel P. Berrangé
The internal inotify APIs allow a lot of conditional statements to be cleared out, and provide a simpler callback for handling events. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-26hw/usb: fix const-ness for string params in MTP driverDaniel P. Berrangé
Various functions accepting 'char *' string parameters were missing 'const' qualifiers. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-26hw/usb: don't set IN_ISDIR for inotify watch in MTP driverDaniel P. Berrangé
IN_ISDIR is not a bit that one can request when registering a watch with inotify_add_watch. Rather it is a bit that is set automatically when reading events from the kernel. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-26ppc/pnv: use IEC binary prefixes to represent sizesMurilo Opsfelder Araujo
Using IEC binary prefixes from qemu/units.h provides a more human-friendly value to size constants. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20190225170155.1972-4-muriloo@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26ppc/pnv: add INITRD_MAX_SIZE constantMurilo Opsfelder Araujo
The current 0x10000000 value is actually 256MiB, not 128MB as the comment suggests. Move it to a constant and fix the comment (no change in the size value). Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20190225170155.1972-3-muriloo@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26ppc/pnv: increase kernel size limit to 256MiBMurilo Opsfelder Araujo
Building kernel with CONFIG_DEBUG_INFO_REDUCED can generate a ~90MB image and building with CONFIG_DEBUG_INFO can generate a ~225M one, both exceeds the current limit of 32MiB. Increasing kernel size limit to 256MiB should fit for now. Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20190225170155.1972-2-muriloo@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26hw/ppc: Use object_initialize_child for correct reference countingThomas Huth
Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1550748288-30598-1-git-send-email-thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26ppc/xive: xive does not have a POWER7 interrupt modelCédric Le Goater
Patch "target/ppc: Add POWER9 external interrupt model" should have removed the section covering PPC_FLAGS_INPUT_POWER7. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190219142530.17807-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: enable PHB hotplug for default pseries machine typeMichael Roth
The 'dr_phb_enabled' field of that class can be set as part of machine-specific init code. It will be used to conditionally enable creation of DRC objects and device-tree description to facilitate hotplug of PHBs. Since we can't migrate this state to older machine types, default the option to true and disable it for older machine types. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <155059673433.1466090.6188091133769611501.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: add hotplug hooks for PHB hotplugGreg Kurz
Hotplugging PHBs is a machine-level operation, but PHBs reside on the main system bus, so we register spapr machine as the handler for the main system bus. Provide the usual pre-plug, plug and unplug-request handlers. Move the checking of the PHB index to the pre-plug handler. It is okay to do that and assert in the realize function because the pre-plug handler is always called, even for the oldest machine types we support. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> (Fixed interrupt controller phandle in "interrupt-map" and TCE table size in "ibm,dma-window" FDT fragment, Greg Kurz) Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059672926.1466090.13612804072190051439.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr_pci: add ibm, my-drc-index property for PHB hotplugMichael Roth
This is needed to denote a boot-time PHB as being hot-pluggable. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059672420.1466090.15147504040270659866.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr_pci: provide node start offset via spapr_populate_pci_dt()Michael Roth
PHB hotplug re-uses PHB device tree generation code and passes it to a guest via RTAS. Doing this requires knowledge of where exactly in the device tree the node describing the PHB begins. Provide this via a new optional pointer that can be used to store the PHB node's start offset. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059671912.1466090.10891589403973703473.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr_events: add support for phb hotplug eventsMichael Roth
Extend the existing EPOW event format we use for PCI devices to emit PHB plug/unplug events. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059671405.1466090.535964535260503283.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: populate PHB DRC entries for root DT nodeNathan Fontenot
This add entries to the root OF node to advertise our PHBs as being DR-capable in accordance with PAPR specification. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059670897.1466090.10843921337591637414.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: create DR connectors for PHBsMichael Roth
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059670389.1466090.10015601248906623076.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr_pci: add PHB unrealizeGreg Kurz
To support PHB hotplug we need to clean up lingering references, memory, child properties, etc. prior to the PHB object being finalized. Generally this will be called as a result of calling object_unparent() on the PHB object, which in turn would normally be called as the result of an unplug() operation. When the PHB is finalized, child objects will be unparented in turn, and finalized if the PHB was the only reference holder. so we don't bother to explicitly unparent child objects of the PHB, with the notable exception of DRCs. This is needed to avoid a QEMU crash when unplugging a PHB and resetting the machine before the guest could handle the event. The DRCs are removed from the QOM tree by pci_unregister_root_bus() and we must make sure we're not leaving stale aliases under the global /dr-connector path. The formula that gives the number of DMA windows is moved to an inline function in the hw/pci-host/spapr.h header because it will have other users. The unrealize function is able to cope with partially realized PHBs. It is hence used to implement proper rollback on the realize error path. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <155059669881.1466090.13515030705986041517.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr_irq: Expose the phandle of the interrupt controllerGreg Kurz
This will be used by PHB hotplug in order to create the "interrupt-map" property of the PHB node. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059669374.1466090.12943228478046223856.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: Expose the name of the interrupt controller nodeGreg Kurz
This will be needed by PHB hotplug in order to access the "phandle" property of the interrupt controller node. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <155059668867.1466090.6339199751719123386.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26xics: Write source state to KVM at claim timeGreg Kurz
The pseries machine only uses LSIs to support legacy PCI devices. Every PHB claims 4 LSIs at realize time. When using in-kernel XICS (or upcoming in-kernel XIVE), QEMU synchronizes the state of all irqs, including these LSIs, later on at machine reset. In order to support PHB hotplug, we need a way to tell KVM about the LSIs that doesn't require a machine reset. An easy way to do that is to always inform KVM when an interrupt is claimed, which really isn't a performance path. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059668360.1466090.5969630516627776426.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr/drc: Drop spapr_drc_attach() fdt argumentGreg Kurz
All DRC subtypes have been converted to generate the FDT fragment at configure connector time instead of attach time. The fdt and fdt_offset arguments of spapr_drc_attach() aren't needed anymore. Drop them and make the implementation of the dt_populate() method mandatory. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059667853.1466090.16527852453054217565.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr/pci: Generate FDT fragment at configure connector timeGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059667346.1466090.326696113231137772.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: Generate FDT fragment for CPUs at configure connector timeGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059666839.1466090.3833376527523126752.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: Generate FDT fragment for LMBs at configure connector timeGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059666331.1466090.6766540766297333313.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr_drc: Allow FDT fragment to be added laterGreg Kurz
The current logic is to provide the FDT fragment when attaching a device to a DRC. This works perfectly fine for our current hotplug support, but soon we will add support for PHB hotplug which has some constraints, that CPU, PCI and LMB devices don't seem to have. The first constraint is that the "ibm,dma-window" property of the PHB node requires the IOMMU to be configured, ie, spapr_tce_table_enable() has been called, which happens during PHB reset. It is okay in the case of hotplug since the device is reset before the hotplug handler is called. On the contrary with coldplug, the hotplug handler is called first and device is only reset during the initial system reset. Trying to create the FDT fragment on the hotplug path in this case, would result in somthing like this: ibm,dma-window = < 0x80000000 0x00 0x00 0x00 0x00 >; This will cause linux in the guest to panic, by simply removing and re-adding the PHB using the drmgr command: page = alloc_pages_node(nid, GFP_KERNEL, get_order(sz)); if (!page) panic("iommu_init_table: Can't allocate %ld bytes\n", sz); The second and maybe more problematic constraint is that the "interrupt-map" property needs to reference the interrupt controller node using the very same phandle that SLOF has already exposed to the guest. QEMU requires SLOF to call the private KVMPPC_H_UPDATE_DT hcall at some point to know about this phandle. With the latest QEMU and SLOF, this happens when SLOF gets quiesced. This means that if the PHB gets hotplugged after CAS but before SLOF quiesce, then we're sure that the phandle is not known when the hotplug handler is called. The FDT is only needed when the guest first invokes RTAS to configure the connector actually, long after SLOF quiesce. Let's postpone the creation of FDT fragments for PHBs to rtas_ibm_configure_connector(). Since we only need this for PHBs, introduce a new method in the base DRC class for that. DRC subtypes will be converted to use it in subsequent patches. Allow spapr_drc_attach() to be passed a NULL fdt argument if the method is available. When all DRC subtypes have been converted, the fdt argument will eventually disappear. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059665823.1466090.18358845122627355537.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Rename PATB/PATBE -> PATEBenjamin Herrenschmidt
That "b" means "base address" and thus shouldn't be in the name of actual entries and related constants. This patch keeps the synthetic patb_entry field of the spapr virtual hypervisor unchanged until I figure out if that has an impact on the migration stream. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190215170029.15641-11-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Fix ordering of hash MMU accessesBenjamin Herrenschmidt
With mttcg, we can have MMU lookups happening at the same time as the guest modifying the page tables. Since the HPTEs of the hash table MMU contains two words (or double worlds on 64-bit), we need to make sure we read them in the right order, with the correct memory barrier. Additionally, when using emulated SPAPR mode, the hypercalls writing to the hash table must also perform the udpates in the right order. Note: This part is still not entirely correct Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190215170029.15641-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc/spapr: Set LPCR:HR when using Radix modeBenjamin Herrenschmidt
The HW relies on LPCR:HR along with the PATE to determine whether to use Radix or Hash mode. In fact it uses LPCR:HR more commonly than the PATE. For us, it's also more efficient to do so, especially since unlike the HW we do not maintain a cache of the current PATE and HV PATE in a generic place. Prepare the grounds for that by ensuring that LPCR:HR is set properly on SPAPR machines. Another option would have been to use a callback to get the PATE but this gets messy when implementing bare metal support, it's much simpler (and faster) to use LPCR. Since existing migration streams may not have it, fix it up in spapr_post_load() as well based on the pseudo-PATE entry that we keep. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190215170029.15641-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr: support memory unplug for qtestDavid Hildenbrand
Fake availability of OV5_HP_EVT, so we can test memory unplug in qtest. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190218092202.26683-3-david@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26ppc: add host-serial and host-model machine attributes (CVE-2019-8934)Prasad J Pandit
On ppc hosts, hypervisor shares following system attributes - /proc/device-tree/system-id - /proc/device-tree/model with a guest. This could lead to information leakage and misuse.[*] Add machine attributes to control such system information exposure to a guest. [*] https://wiki.openstack.org/wiki/OSSN/OSSN-0028 Reported-by: Daniel P. Berrangé <berrange@redhat.com> Fix-suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <20190218181349.23885-1-ppandit@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Add POWER9 external interrupt modelBenjamin Herrenschmidt
Adds support for the Hypervisor directed interrupts in addition to the OS ones. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - modified the icp_realize() and xive_tctx_realize() to take into account explicitely the POWER9 interrupt model - introduced a specific power9_set_irq for POWER9 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190215161648.9600-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Rename "in_pm_state" to "resume_as_sreset"Benjamin Herrenschmidt
To better reflect what this does, as it's specific to some of the P7/P8/P9 PM states, not generic. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215161648.9600-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 12:56:25 +0000