aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2009-05-01virtio-blk: add SGI_IO passthru supportChristoph Hellwig
[had the qemu list address wrong the first time, reply to this message, not the previous if you were on Cc] Add support for SG_IO passthru (packet commands) to the virtio-blk backend. Conceptually based on an older patch from Hannes Reinecke but largely rewritten to match the code structure and layering in virtio-blk. Note that currently we issue the hose SG_IO synchronously. We could easily switch to async I/O, but that would required either bloating the VirtIOBlockReq by the size of struct sg_io_hdr or an additional memory allocation for each SG_IO request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01Remove redundant cirrus vga ram functions.Paul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-30Remove vga LFB accessor hacks.Paul Brook
These are redundant now that we remap the LFB ram area. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-27Synch to VGABlue Swirl
2009-04-27[RESEND] Fix vga segfaults or screen corruption with large memory guestsAvi Kivity
page0 and friends are ram addresses; a smaller size will overflow and cause a segfault or random corruption. Change them to ram_addr_t. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-04-25Fix compilation when x86_64 is definedBlue Swirl
2009-04-25Fix warningBlue Swirl
2009-04-24qemu: create helper for event notification (Marcelo Tosatti)aliguori
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7236 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-23Fix typo, thanks to Andreas Faerber for spottingblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7235 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-23Use a more natural orderblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7234 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22Change RTC time drift IRQ re-injection (Gleb Natapov)aliguori
Currently IRQ are reinjected as soon as they are acknowledged to the RTC, but Windows sometimes do acknowledgement in a loop with global interrupt disabled waiting for interrupt to be cleared and it does not mask RTC vector in PIC/APIC while doing this. In such situation interrupt injection always fails and RTC interrupt is never cleared. Instead of reinjecting coalesced IRQs on acknowledgement the patch below reinjects them by accelerating RTC clock a bit. This way RTC interrupt is not constantly raced after coalesced interrupt. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7231 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22implement qemu_blockalign (Stefano Stabellini)aliguori
this patch adds a buffer_alignment field to BlockDriverState and implements a qemu_blockalign function that uses that field to allocate a memory aligned buffer to be used by the block driver. buffer_alignment is initialized to 512 but each block driver can set a different value (at the moment none of them do). This patch modifies ide.c, block-qcow.c, block-qcow2.c and block.c to use qemu_blockalign instead of qemu_memalign. There is only one place left that still uses qemu_memalign to allocate buffers used by block drivers that is posix-aio-compat:handle_aiocb_rw because it is not possible to get the BlockDriverState from that function. However I think it is not important because posix-aio-compat already deals with driver specific code so it is supposed to know its own needs. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7229 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add -vga xenfb option, configure xenfb (Gerd Hoffmann)aliguori
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7228 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: pv domain builder. (Gerd Hoffmann)aliguori
This adds domain building support for paravirtual domains to qemu. This allows booting xen guests directly with qemu, without Xend and the management stack. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7226 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: blk & nic configuration via cmd line. (Gerd Hoffmann)aliguori
This patch makes qemu create backend and frontend device entries in xenstore for devices configured on the command line. It will use qdisk and qnic backend names, so the qemu internal backends will be used. Disks can be created using -drive if=xen,file=... Nics can be created using -net nic,macaddr=... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7225 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add net backend driver. (Gerd Hoffmann)aliguori
This patch adds a network interface backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qnet" as backend name in xenstore so it doesn't interfere with the netback backend (aka "vnif"). The network backend is hooked into the corrosponding qemu vlan, i.e. vif 0 is hooked into vlan 0. To make the packages actually arrive somewhere you additionally have to link the vlan to the outside world using the usual qemu command line options such as "-net tap,...". Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7224 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add block device backend driver. (Gerd Hoffmann)aliguori
This patch adds a block device backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qdisk" as backend name in xenstore so it doesn't interfere with the other existing backends (blkback aka "vbd" and tapdisk aka "tap"). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7223 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add framebuffer backend driver (Gerd Hoffmann)aliguori
This patch adds a frsamebuffer (and kbd+mouse) backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. It also has been changed to compile with xen headers older than release 3.3 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7222 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add console backend driver. (Gerd Hoffmann)aliguori
This patch adds a xenconsole backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7221 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: backend driver core (Gerd Hoffmann)aliguori
This patch adds infrastructure for xen backend drivers living in qemu, so drivers don't need to implement common stuff on their own. It's mostly xenbus management stuff: some functions to access xentore, setting up xenstore watches, callbacks on device discovery and state changes, handle event channel, ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: groundwork for xen support (Gerd Hoffmann)aliguori
- configure script and build system changes. - wind up new machine type. - add -xen-* command line options. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7219 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21sending NUMA topology to BIOS (Andre Przywara)aliguori
uses the QEMU firmware configuration interfacce to send the NUMA topology to the BIOS, which has to setup the tables. Only one firmware configuration channel is used. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7212 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19kqemu: merge CONFIG_KQEMU and USE_KQEMUblueswir1
Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Adds SM501 usb host emulation feature.aurel32
It makes usb keyboard available for sh4/r2d system emulation. The changes for "hw/usb-ohci.c" are as follows. - 'localmem_base' is introduced as OHCIState struct member. SM501 has a local memory, and it is used to pass and receive data with OHCI driver. OHCI driver accesses it with SH4 physical memory address, and SM501 accesses it with SM501 local address. 'localmem_base' holds where the SM501 local memory is mapped into SH4 physical address space. - Memory access functions modified to adjust address with 'localmem_base'. The functions are, ohci_read_*(), ohci_put_*(), and ohci_copy_*(). - ohci_read_hcca() and ohci_put_hcca() are introduced for more consistent implementation. For other source files, it does, - introduces usb_ohci_init_sm501(). - adds irq argument for SM501 initialization, to emulate USB interrupts. Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7188 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Fix indices in Menelaus save/load.balrog
Version increase won't be helpful here. Spotted by Sergei Steshenko / Blau Wirbel. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7186 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17hpet: Fix emulation of HPET_TN_SETVAL (Jan Kiszka)aliguori
While Intel's spec is not that clear here, latest changes to Linux' HPET code (commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403, "x86: hpet: stop HPET_COUNTER when programming periodic mode") strongly suggest that HPET_TN_SETVAL rather means: Set _both_ the comparator value and register. With this patch applied, I'm again able to boot 2.6.30-rc kernels as they no longer panic like this (which was due to the comparator register remaining 0): ENABLING IO-APIC IRQs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 2) ... ....... failed. ...trying to set up timer as Virtual Wire IRQ... ..... failed. ...trying to set up timer as ExtINT IRQ... ..... failed :(. Kernel panic - not syncing: IO-APIC + timer doesn't work! [...] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7168 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17qemu: Add support for SMBIOS command line otions (Alex Williamson)aliguori
Create a new -smbios option (x86-only) to allow binary SMBIOS entries to be passed through to the BIOS or modify the default values of individual fields of type 0 and 1 entries on the command line. Binary SMBIOS entries can be generated as follows: dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \ perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin These can then be passed to the BIOS using this switch: -smbios file=smbios_type_1.bin Command line generation supports the following syntax: -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] [,uuid=$(uuidgen)][,sku=str][,family=str] For instance, to add a serial number to the type 1 table: -smbios type=1,serial=0123456789 Interface is extensible to support more fields/tables as needed. aliguori: remove texi formatting from help output Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7163 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Use NICInfo::model for eepro100 savevm ID string (Mark McLoughlin)aliguori
NICInfo::model will always be identical to the device name strings we're currently passing to nic_init(). Just re-use NICInfo::model. This makes it clear why we use vc->model for unregister_savevm() in a subsequent patch. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7149 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Add unregister_savevm() (Mark McLoughlin)aliguori
Currently there's no way to unregister a savevm callback, so e.g. if a NIC is hot-unplugged and a savevm is issued, we'll segfault. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7148 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Remove NICInfo from e1000 and mipsnet state (Mark McLoughlin)aliguori
NICInfo isn't used after initialization, so remove it from the driver state structures. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7147 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Don't fail PCI hotplug if no NIC model is supplied (Mark McLoughlin)aliguori
It's perfectly fine to not supply a NIC model when adding a new NIC - we supply the default model to pci_nic_init() and it uses that if one wasn't explicitly supplied. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7145 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Remove stray GSO code from virtio_net (Mark McLoughlin)aliguori
Obviously merged from kvm-userspace accidentally. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7142 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17vga: Cleanup dirty logging (Jan Kiszka)aliguori
In theory, there are no more quirks in the KVM slot management that requires dirty log start/stop all over the place. We just have to start the logging each time the mapping may have changed. This patch drops vga_dirty_log_stop for both standard and cirrus VGA. It also reverts #6851 as it was obviously a tribute to the old slot system. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7141 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17vga: Fix inconsistent tracking of map_addr (Jan Kiszka)aliguori
Only track video RAM mapping in map_addr and use the correct RAM size. Furthermore, make sure the reset the address in case unmapping took place via PCI reconfiguration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7140 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17kvm: Apply SMM-already-initialized workaround on reset (Jan Kiszka)aliguori
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7136 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-15Implement sonic netcard (MIPS Jazz)aurel32
Attached patch adds emulation of a SONIC netcard. This card has been used in MIPS Jazz machines and in some Apple Mac 68K. Emulation has been done using dp83932 specification, but can be enhanced (if needed) to also emulate dp83916, dp83934 or dp83936 chipsets. This has been tested in Linux 2.1, NetBSD 1.6.2 and MS Windows NT/MIPS Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7112 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-15target-alpha: lower parent irq when irq is lowered.aurel32
Signed-off-by: Tristan Gingold <gingold@adacore.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7108 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-13Fix OpenSolaris gcc4 warnings: iovec type mismatches, missing 'static'blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7103 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-11Add named initializers.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7091 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-11Remove redundant ram_require machine properly.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-11Remove more redundant ram size checks.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7089 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-11Fix/remove bogus ram size checks.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7087 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-11Allocate enough vram for 24-bit planes.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7086 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-11mips malta: fix commit 7064aurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7079 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Clean up rc4030 init functionaurel32
At the moment, rc4030 init function is returning some function pointers. Mark them non-static and define them in header file instead. Export also a function to read/write DMA memory, it will be required by the netcard. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7072 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Make PCI config status register read-onlyaliguori
From the documentation I can find, this register is supposed to be read-only. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7070 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Wean device tree code off phys_ram_base.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7068 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Yet more phys_ram_base elimination.pbrook
Signed-off-by: Paul Brook <paul@cofdesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7067 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10More phys_ram_base elimination.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7064 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 06:52:16 +0000