| Age | Commit message (Collapse) | Author |
|---|
|
spapr_init_cpus() currently creates spapr-cpu-core objects via
object_new() and setting their realized property to true. This leaves
their reference count at two, because object_new() adds an initial
reference and the realization attaches them to a default parent object
which also increments the reference count.
This causes a problem if one of these cores is hot unplugged: no
delete event is generated for it because it's reference count doesn't
reach zero when it is detached from it's parent.
Correct this by adding a call to object_unref() in spapr_init_cpus().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This enables the correct generation of bootdevice fw paths for in-built IDE
and virtio-pci-blk devices suitable for OpenBIOS.
Note we also set the MachineClass ignore_boot_device_suffixes property to true
since an additional disk node should not be added except for virtio devices.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This enables the correct generation of bootdevice fw paths for in-built IDE
and virtio-pci-blk devices suitable for OpenBIOS.
Note we also set the MachineClass ignore_boot_device_suffixes property to true
since an additional disk node should not be added except for virtio devices.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This contains the offset of the IDE controller within the macio address space
and is required to allow the address to be included within the fw path.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
As the in-built IDE controller is attached to the macio bus then we should also
model this the same in QEMU to aid fw path generation.
Note that all existing macio devices are moved onto the new macio bus so that
the qdev tree accurately reflects the real hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_BLK has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532542110-9017-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_NET has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532542056-8927-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_INPUT has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-11-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_GPU has been set. This
can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-10-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VHOST_VSOCK has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-9-git-send-email-thuth@redhat.com>
[CH: updated MAINTAINERS]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_CRYPTO has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-8-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_9P and CONFIG_VIRTFS
have been set. This can be done best if the code resides in a separate
file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-7-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_RNG has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-6-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_SCSI has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-5-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_BALLOON has been
set. This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-4-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The code should only be enabled if CONFIG_VIRTIO_SERIAL has been set.
This can be done best if the code resides in a separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Currently, every virtio-ccw device explicitely sets its unrealize
function to virtio_ccw_unrealize() in its class_init function.
We can simplify this by using a common unrealize function, just like
it is already done for the realize functions.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1532521224-27235-2-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Commit 2c88b098e76fd added a call to SPAPR_MACHINE_GET_CLASS(spapr) in
spapr_phb_realize() before we check spapr isn't NULL. This causes QEMU
to crash when starting a non-pseries machine with a sPAPR PHB.
This could be fixed by setting the smc variable after the null check,
but it seems more explicit to use a ternary operator to skip the call
to SPAPR_MACHINE_GET_CLASS() if spapr is NULL, since spapr_phb_realize()
will return immediately in this case.
This was reported by Coverity (CID 1395170 and 1395183).
Fixes: 2c88b098e76fde0c7fcc0476dd3f80ce58409505
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Introduced in 04d595b300 ("spapr: do not use CPU_FOREACH_REVERSE",
2018-08-23)
Fixes: CID1395181
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Replace all the trace_vtd_err_*() hooks with the new error_report_once()
since they are similar to trace_vtd_err() - dumping the first error
would be mostly enough, then we have them on by default too.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815095328.32414-4-peterx@redhat.com>
[Use "%x" instead of "%" PRIx16 to print uint16_t, whitespace tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Replace existing trace_vtd_err() with error_report_once() then stderr
will capture something if any of the error happens, meanwhile we don't
suffer from any DDOS. Then remove the trace point. Since at it,
provide more information where proper (now we can pass parameters into
the report function).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815095328.32414-3-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[Two format strings fixed, whitespace tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
into staging
VFIO fixes 2018-08-23
- Fix coverity reported issue with use of realpath (Alex Williamson)
- Cleanup file descriptor in error path (Alex Williamson)
- Fix postcopy use of new balloon inhibitor (Alex Williamson)
# gpg: Signature made Thu 23 Aug 2018 17:46:41 BST
# gpg: using RSA key 239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22
* remotes/awilliam/tags/vfio-fixes-20180823.1:
postcopy: Synchronize usage of the balloon inhibitor
vfio/pci: Fix failure to close file descriptor on error
vfio/pci: Handle subsystem realpath() returning NULL
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fix passing argument for nanoMIPS bare metal related to the
semihosting regime.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
|
|
Setup the GT64120 BARs in the nanoMIPS bootloader, in the same way that
they are setup in the MIPS32 bootloader. This is necessary for Linux to
be able to access peripherals, including the UART.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Paul Burton <pburton@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
|
|
Add basic nanoMIPS boot code for Malta.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
|
|
staging
check/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 09:03:40 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/check/20180822:
check: Only test tpm devices when they are compiled in
check: Only test usb-ehci when it is compiled in
check: Only test usb-uhci devices when they are compiled in
check: Only test usb-ohci when it is compiled in
check: Only test nvme when it is compiled in
check: Only test pvpanic when it is compiled in
check: Only test wdt_ib700 when it is compiled in
check: Only test sdhci when it is compiled in
check: Only test i82801b11 when it is compiled in
check: Only test ioh3420 when it is compiled in
check: Only test ipack when it is compiled in
check: Only test hda when it is compiled in
check: Only test ac97 when it is compiled in
check: Only test es1370 when it is compiled in
check: Only test rtl8139 when it is compiled in
check: Only test pcnet when it is compiled in
check: Only test eepro100 when it is compiled in
check: Only test ne2000 when it is compiled in
check: Only test vmxnet3 when it is compiled in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fix MPS2 SCC config register values for the mps2-an511
and mps2-an385 boards:
* the SCC_AID bits [23:20] specify the FPGA build target board revision,
and the SCC_CFG4 register specifies the actual board revision, so
these should have matching values. Claim to be board revision C,
consistently -- we had the revision in the wrong part of SCC_AID.
* SCC_ID bits [15:4] should be the board number in hex, not decimal
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180823175225.22612-1-peter.maydell@linaro.org
|
|
Refactor bcm2835_fb_mbox_push() to work by calling
bcm2835_fb_validate_config() and bcm2835_fb_reconfigure(),
so that config set this way is also validated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-9-peter.maydell@linaro.org
|
|
Validate the config settings that the guest tries to set.
The wiki page documentation is not really accurate here:
generally rather than failing requests to set bad parameters,
the hardware will just clip them to something sensible.
Validate the most important parameters: sizes and
the viewport offsets. This prevents the framebuffer
code from trying to read out-of-range memory.
In the property handling code, we validate the new parameters every
time we encounter a tag that sets them. This means we validate the
config multiple times if the request includes multiple config-setting
tags, but the code would require significant restructuring to do a
validation only once but still return the clipped settings for
get-parameter tags and the buffer allocation tag.
Validation of settings made via the older bcm2835_fb_mbox_push()
function will be done in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-8-peter.maydell@linaro.org
|
|
The raspi framebuffir in bcm2835_fb supports the definition
of a virtual "viewport", which is smaller than the full
physical framebuffer size and at an adjustable offset within
it. Only the viewport area is sent to the screen. This allows
the guest to do things like double buffering, or scrolling
by adjusting the viewport origin. Currently QEMU doesn't
implement this at all.
Add support for this feature:
* the property mailbox code needs to distinguish the
virtual width/height from the physical width/height
* the framebuffer code needs to do something with the
virtual width/height/origin information
Note that the wiki documentation on the semantics of the
virtual and physical height and width has it the wrong way
around -- the virtual size is the size of the allocated
buffer, and the physical size is the size of the display,
so the virtual size is always the same as or larger than
the physical.
If the viewport size is set smaller than the physical
screen size, we ignore the viewport settings completely
and just display the physical screen area.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-7-peter.maydell@linaro.org
|
|
Abstract out the calculation of the pitch and size of the
framebuffer into functions that operate on the BCM2835FBConfig
struct -- these are about to get a little more complicated
when we add support for virtual and physical sizes differing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-6-peter.maydell@linaro.org
|
|
The bcm2835_fb's initial resolution and other parameters are set
via QOM properties. We should reset to those initial values on
device reset, which means we need to save the QOM property
values somewhere that they are not overwritten by guest
changes to the framebuffer configuration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-5-peter.maydell@linaro.org
|
|
The BCM2835FBState struct has a 'pitch' field which is a
cached copy of xres * (bpp >> 3), and a 'size' field which is
a cached copy of pitch * yres. However we don't actually do
anything with these fields; delete them. We retain the
now-unused slots in the VMState struct for migration
compatibility.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-4-peter.maydell@linaro.org
|
|
Refactor the fb property setting code so that rather than
using a set of pointers to local variables to track
whether a config value has been updated in the current
mbox and if so what its new value is, we just copy
all the current settings of the fb at the start, and
then update that copy as we go along, before asking
the fb to switch to it at the end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-3-peter.maydell@linaro.org
|
|
The handling of framebuffer properties in the bcm2835_property code
is a bit clumsy, because for each of the many fb related properties
we try to track the value we're about to set and whether we're going
to be setting a value, and then we hand all the new values off
to the framebuffer via a function which takes them all as separate
arguments. It would be simpler if the property code could easily
copy all the framebuffer's current settings, update them with
the new specified values and then ask the framebuffer to switch
to the new set.
As the first part of this refactoring, pull all the fb config
settings fields in BCM2835FBState out into their own struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-2-peter.maydell@linaro.org
|
|
Some of the config register values we were setting for the MPS2 SCC
weren't correct:
* the SCC_AID bits [23:20] specify the FPGA build target board revision,
and the SCC_CFG4 register specifies the actual board revision, so
these should have matching values. Claim to be board revision C,
consistently -- we had the revision in the wrong part of SCC_AID.
* SCC_ID bits [15:4] should be 0x505, not decimal 505
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-23-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The SPI controllers in the MPS2 AN505 board are PL022s.
We have a model of the PL022, so create these devices.
We don't currently model the LCD controller that sits behind
one of the PL022s; the others are intended to control devices
that sit on the FPGA's general purpose SPI connector or
"shield" expansion connectors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-22-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In the PL022, register offset 0x20 is the ICR, a write-only
interrupt-clear register. Register offset 0x24 is DMACR, the DMA
control register. We were incorrectly implementing (a stub version
of) DMACR at 0x20, and not implementing anything at 0x24. Fix this
bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-21-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The PL022 interrupt registers have bits allocated as:
0: ROR (receive overrun)
1: RT (receive timeout)
2: RX (receive FIFO half full or less)
3: TX (transmit FIFO half full or less)
A cut and paste error meant we had the wrong value for
the PL022_INT_RT constant. This bug doesn't affect device
behaviour, because we don't implement the receive timeout
feature and so never set that interrupt bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-20-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Move from the legacy SysBusDevice::init method to using
DeviceState::realize.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-19-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Use the DeviceState vmsd pointer rather than calling vmstate_register()
directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-18-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Currently the PL022 calls pl022_reset() from its class init
function. Make it register a DeviceState reset method instead,
so that we reset the device on system reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-17-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Create a new include file for the pl022's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
While we're adding the new file to MAINTAINERS, add
also the .c file, which was missing an entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-16-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The AN505 FPGA image includes four PL081 DMA controllers, each
of which is gated by a Master Security Controller that allows
the guest to prevent a non-secure DMA controller from accessing
memory that is used by secure guest code. Create and wire
up these devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-15-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The IoTKit doesn't have any MSCs itself but it does need
some wiring to connect the external signals from MSCs
in the outer board model up to the registers and the
NVIC IRQ line.
We also need to expose a MemoryRegion corresponding to
the AHB bus, so that MSCs in the outer board model can
use that as their downstream port. (In the FPGA this is
the "AHB Slave Expansion" ports shown in the block
diagram in the AN505 documentation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-14-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
