aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2013-10-11blockdev: Remove IF_* check for read-only blockdev_initKevin Wolf
IF_NONE allows read-only, which makes forbidding it in this place for other types pretty much pointless. Instead, make sure that all devices for which the check would have errored out check in their init function that they don't get a read-only BlockDriverState. This catches even cases where IF_NONE and -device is used. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11ahci: set ahci mode on resetMichael S. Tsirkin
ATM we set AHCI mode on 1st GHC write. Spec says we should set it on reset. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-10Merge remote-tracking branch 'sstabellini/xen-2013-10-10' into stagingAnthony Liguori
# By Matthew Daley (1) and Roger Pau Monné (1) # Via Stefano Stabellini * sstabellini/xen-2013-10-10: qemu/xen: make use of xenstore relative paths xen_disk: mark ioreq as mapped before unmapping in error case
2013-10-10Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
# By Asias He (1) and Peter Lieven (1) # Via Paolo Bonzini * bonzini/scsi-next: scsi: Allocate SCSITargetReq r->buf dynamically [CVE-2013-4344] block/iscsi: reenable iscsi_co_get_block_status Message-id: 1381332391-8781-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-10qemu/xen: make use of xenstore relative pathsRoger Pau Monné
Qemu has several hardcoded xenstore paths that are only valid on Dom0. Attempts to launch a Qemu instance (to act as a userspace backend for PV disks) will fail because Qemu is not able to access those paths when running on a domain different than Dom0. Instead make the xenstore paths relative to the domain where Qemu is actually running. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Cc: xen-devel@lists.xenproject.org Cc: Anthony PERARD <anthony.perard@citrix.com>
2013-10-10xen_disk: mark ioreq as mapped before unmapping in error caseMatthew Daley
Commit 4472beae modified the semantics of ioreq_{un,}map so that they are idempotent if called when they're not needed (ie., twice in a row). However, it neglected to handle the case where batch mapping is not being used (the default), and one of the grants fails to map. In this case, ioreq_unmap will be called to unwind and unmap any mappings already performed, but ioreq_unmap simply returns due to the aforementioned change (the ioreq has not already been marked as mapped). The frontend user can therefore force xen_disk to leak grant mappings, a per-domain limited resource. Fix by marking the ioreq as mapped before calling ioreq_unmap in this situation. Signed-off-by: Matthew Daley <mattjd@gmail.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-10-09scsi: Allocate SCSITargetReq r->buf dynamically [CVE-2013-4344]Asias He
r->buf is hardcoded to 2056 which is (256 + 1) * 8, allowing 256 luns at most. If more than 256 luns are specified by user, we have buffer overflow in scsi_target_emulate_report_luns. To fix, we allocate the buffer dynamically. Signed-off-by: Asias He <asias@redhat.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-05hw/9pfs: Fix errno value for xattr functionsDaniel P. Berrange
If there is no operation driver for the xattr type the functions return '-1' and set errno to '-EOPNOTSUPP'. When the calling code sets 'ret = -errno' this turns into a large positive number. In Linux 3.11, the kernel has switched to using 9p version 9p2000.L, instead of 9p2000.u, which enables support for xattr operations. This on its own is harmless, but for another change which makes it request the xattr with a name 'security.capability'. The result is that the guest sees a succesful return of 95 bytes of data, instead of a failure with errno set to 95. Since the kernel expects a maximum of 20 bytes for an xattr return this gets translated to the unexpected errno ERANGE. This all means that when running a binary off a 9p fs in 3.11 kernels you get a fun result of: # ./date sh: ./date: Numerical result out of range The only workaround is to pass 'version=9p2000.u' when mounting the 9p fs in the guest, to disable all use of xattrs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-02pci-ohci: Add missing 'break' in ohci_service_tdJán Veselý
Device communication errors need to be reported to driver. Add a debug message while at it. Signed-off-by: Jan Vesely <jano.vesely@gmail.com> Acked-by: Gerd Hoffmann <kraxel@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-02sh4: Fix serial line access for Linux kernels later than 3.2Guenter Roeck
With Linux kernel version 3.3 or later, qemu fails with the following message: sh_serial: unsupported read from 0x18 Aborted Reported-and-analyzed-by: Rob Landley <rob@landley.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-02hw/alpha: Fix compiler warning (integer constant is too large)Stefan Weil
From buildbot default_i386_rhel61: CC alpha-softmmu/hw/alpha/typhoon.o hw/alpha/typhoon.c: In function 'typhoon_translate_iommu': hw/alpha/typhoon.c:703: warning: integer constant is too large for 'long' type hw/alpha/typhoon.c:703: warning: integer constant is too large for 'long' type Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-30Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc,pci,virtio fixes and cleanups This includes pc and pci cleanups and enhancements, and a virtio-net bugfix related to softmac programming. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (8) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: smbios: Factor out smbios_maybe_add_str() smbios: Make multiple -smbios type= accumulate sanely smbios: Improve diagnostics for conflicting entries smbios: Convert to QemuOpts smbios: Normalize smbios_entry_add()'s error handling to exit(1) virtio-net: fix up HMP NIC info string on reset pci: remove explicit check to 64K ioport size piix4: disable io on reset piix: use 64 bit window programmed by guest q35: use 64 bit window programmed by guest pci: add helper to retrieve the 64-bit range range: add min/max operations on ranges range: add Range to typedefs q35: make pci window address/size match guest cfg Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
2013-09-30Merge remote-tracking branch 'sstabellini/xen-2013-09-25' into stagingAnthony Liguori
# By Anthony PERARD (2) and Liu, Jinsong (2) # Via Stefano Stabellini * sstabellini/xen-2013-09-25: xen: Enable cpu-hotplug on xenfv machine. xen: Fix vcpu initialization. qemu: Add qemu xen logic for Xen HVM S3 resume qemu: Adjust qemu wakeup Message-id: alpine.DEB.2.02.1309251749180.5498@kaball.uk.xensource.com
2013-09-30Merge remote-tracking branch 'kraxel/audio.1' into stagingAnthony Liguori
# By Bandan Das (3) and Gerd Hoffmann (1) # Via Gerd Hoffmann * kraxel/audio.1: audio: remove CONFIG_MIXEMU configure option hda-codec: make mixemu selectable at runtime hda-codec: refactor common definitions into a header file audio maintainers update Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com
2013-09-30Merge remote-tracking branch 'borntraeger/tags/s390-next-20130924' into stagingAnthony Liguori
This is a bunch of fixes/changes for the s390 architecture. It also contains the fixes from the previous pull request, which did not make it yet. Overall it contains - a fix for kexec without kdump (which uses diag308 subcode 0 instead of 1) - several sclp related fixes - some initial sclp migration code - the sclp line mode console - A fix for a boot problem with the virtio ccw ipl bios - zeroed out padding bytes for the notes section of dump-guest-memory - some cleanups # gpg: Signature made Tue 24 Sep 2013 02:18:44 AM CDT using RSA key ID B5A61C7C # gpg: Can't check signature: public key not found # By Christian Borntraeger (6) and others # Via Christian Borntraeger * borntraeger/tags/s390-next-20130924: s390/sclplmconsole: Add support for SCLP line-mode console s390/ebcdic: Move conversion tables to header file s390/eventfacility: allow childs to handle more than 1 event type s390/eventfacility: remove unused event_type variable s390/eventfacility: Fix receive/send masks s390/eventfacility: fix multiple Read Event Data sources s390/sclp: add reset() functions s390/sclpquiesce: Add code to support live migration s390/sclpconsole: Add code to support live migration for sclpconsole s390/sclpconsole: modify definition of input buffer s390/kexec: Implement diag308 subcode 0 s390/ioinst: Moved the CC setting to the IO instruction handlers s390/cpu: Make setcc() function available to other files s390/ipl: Update the s390-ccw.img rom s390/ipl: Fix waiting for virtio processing s390/dump: zero out padding bytes in notes sections s390/kvm: Add check for priviledged SCLP handler Message-id: 1380007671-18976-1-git-send-email-borntraeger@de.ibm.com
2013-09-28smbios: Factor out smbios_maybe_add_str()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Make multiple -smbios type= accumulate sanelyMarkus Armbruster
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with value VAL to fw_cfg for each unique NAME. If NAME occurs multiple times, the last one's VAL is used (before the QemuOpts conversion, the first one was used). Multiple -smbios can add multiple fields with the same (T, NAME). SeaBIOS reads all of them from fw_cfg, but uses only the first field (T, NAME). The others are ignored. "First one wins, subsequent ones get ignored silently" isn't nice. We commonly let the last option win. Useful, because it lets you -readconfig first, then selectively override with command line options. Clean up -smbios to work the common way. Accumulate the settings, with later ones overwriting earlier ones. Put the result into fw_cfg (no more useless duplicates). Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by side effect. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Improve diagnostics for conflicting entriesMarkus Armbruster
We allow either tables or fields for the same type. Makes sense, because SeaBIOS uses fields only when no tables are present. We do this by searching the SMBIOS blob for a previously added table or field. Error messages look like this: qemu-system-x86_64: -smbios type=1,serial=42: SMBIOS type 1 table already defined, cannot add field User needs to know that "table" is defined by -smbios file=..., and "field" by -smbios type=... Instead of searching the blob, record additions of interest, and check that. Simpler, and makes better error messages possible: qemu-system-x86_64: -smbios file=smbios_type_1.bin: Can't mix file= and type= for same type qemu-system-x86_64: -smbios type=1,serial=42,serial=99: This is the conflicting setting Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Convert to QemuOptsMarkus Armbruster
So that it can be set in config file for -readconfig. This tightens parsing of -smbios, and makes it more consistent with other options: unknown parameters are rejected, numbers with trailing junk are rejected, when a parameter is given multiple times, last rather than first wins, ... MST: drop one chunk to fix build errors Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28smbios: Normalize smbios_entry_add()'s error handling to exit(1)Markus Armbruster
It exits on all error conditions but one, where it returns -1. Normalize, and return void. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-25xen: Enable cpu-hotplug on xenfv machine.Anthony PERARD
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-09-25qemu: Adjust qemu wakeupLiu, Jinsong
Currently Xen hvm s3 has a bug coming from the difference between qemu-traditioanl and qemu-xen. For qemu-traditional, the way to resume from hvm s3 is via 'xl trigger' command. However, for qemu-xen, the way to resume from hvm s3 inherited from standard qemu, i.e. via QMP, and it doesn't work under Xen. The root cause is, for qemu-xen, 'xl trigger' command didn't reset devices, while QMP didn't unpause hvm domain though they did qemu system reset. We have two qemu patches and one xl patch to fix Xen hvm s3 bug. This patch is the qemu patch 1. It adjusts qemu wakeup so that Xen s3 resume logic (which will be implemented at qemu patch 2) will be notified after qemu system reset. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
2013-09-24audio: remove CONFIG_MIXEMU configure optionBandan Das
Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-24hda-codec: make mixemu selectable at runtimeBandan Das
Define PARAM so that we have two versions of the "desc_codec and family" structs. Add a property called "mixer" whose default value depends on whether CONFIG_MIXEMU is defined or not which will help us call the appropriate instance init functions. Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-24hda-codec: refactor common definitions into a header fileBandan Das
Move common defines and structs to a header file. The next commit will include it twice, once for a device with a mixer, and once for device without a mixer. Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-23Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori
# By Aurelien Jarno (1) and Vincenzo Maffione (1) # Via Stefan Hajnoczi * stefanha/net: e1000: NetClientInfo.receive_iov implemented pcnet-pci: mark I/O and MMIO as LITTLE_ENDIAN Message-id: 1379699613-5338-1-git-send-email-stefanha@redhat.com
2013-09-23Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By Stefan Hajnoczi (4) and others # Via Stefan Hajnoczi * stefanha/block: virtio-blk: do not relay a previous driver's WCE configuration to the current blockdev: do not default cache.no-flush to true block: don't lose data from last incomplete sector qcow2: Correct snapshots size for overlap check coroutine: fix /perf/nesting coroutine benchmark coroutine: add qemu_coroutine_yield benchmark qemu-timer: do not take the lock in timer_pending qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe qemu-timer: drop outdated signal safety comments osdep: warn if open(O_DIRECT) on fails with EINVAL libcacard: link against qemu-error.o for error_report() Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
2013-09-23Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Stefan Weil (8) and others # Via Michael Tokarev * mjt/trivial-patches: tests/.gitignore: ignore test-throttle exec: Fix broken build for MinGW (regression) kvm: Fix compiler warning (clang) tcg-sparc: Fix parenthesis warning Makefile: Remove some more files when cleaning target-i386: Fix segment cache dump iov: avoid "orig_len may be used unitialized" warning vscclient: remove unnecessary use of uninitialized variable trace-events: Clean up with scripts/cleanup-trace-events.pl again tci: Fix qemu-alpha on 32 bit hosts (wrong assertions) *-user: Improve documentation for lock_user function MAINTAINERS: Add missing entry to filelist for TCI target translate-all: Fix formatting of dump output *-user: Fix typo in comment (ulocking -> unlocking) docs: Fix IO port number for CPU present bitmap. q35: Fix typo in constant DEFUALT -> DEFAULT. configure: Undefine _FORTIFY_SOURCE prior using it Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
2013-09-23Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
# By Alexey Kardashevskiy (3) and others # Via Paolo Bonzini * qemu-kvm/uq/master: target-i386: add feature kvm_pv_unhalt linux-headers: update to 3.12-rc1 target-i386: forward CPUID cache leaves when -cpu host is used linux-headers: update to 3.11 kvm: fix traces to use %x instead of %d kvmvapic: Clear also physical ROM address when entering INACTIVE state kvmvapic: Enter inactive state on hardware reset kvmvapic: Catch invalid ROM size kvm irqfd: support direct msimessage to irq translation fix steal time MSR vmsd callback to proper opaque type kvm: warn if num cpus is greater than num recommended cpu: Move cpu state syncs up into cpu_dump_state() exec: always use MADV_DONTFORK Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
2013-09-23Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
# By Hervé Poussineau (5) and Stefan Weil (1) # Via Paolo Bonzini * bonzini/scsi-next: block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi lsi: add 53C810 variant lsi: remove todo lsi: ignore write accesses to CTEST0 registers lsi: check ssid versus sdid only if ssid is valid lsi: use constant name instead of its value
2013-09-22virtio-net: fix up HMP NIC info string on resetMichael S. Tsirkin
When mac is updated on reset, info string has stale data. Fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-20e1000: NetClientInfo.receive_iov implementedVincenzo Maffione
This patch implements the NetClientInfo.receive_iov method for the e1000 device emulation. In this way a network backend that uses qemu_sendv_packet() can deliver the fragmented packet without requiring an additional copy in the frontend/backend network code (nc_sendv_compat() function). The existing method NetClientInfo.receive has been reimplemented using the new method. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-20pcnet-pci: mark I/O and MMIO as LITTLE_ENDIANAurelien Jarno
Now that the memory subsystem is propagating the endianness correctly, the pcnet-pci device should have its I/O ports and MMIO memory marked as LITTLE_ENDIAN, as PCI devices are little endian. This makes the pcnet-pci NIC to work again on big endian MIPS Malta (default NIC). Cc: qemu-stable@nongnu.org Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-20virtio-blk: do not relay a previous driver's WCE configuration to the currentPaolo Bonzini
The following sequence happens: - the SeaBIOS virtio-blk driver does not support the WCE feature, which causes QEMU to disable writeback caching - the Linux virtio-blk driver resets the device, finds WCE is available but writeback caching is disabled; tells block layer to not send cache flush commands - the Linux virtio-blk driver sets the DRIVER_OK bit, which causes writeback caching to be re-enabled, but the Linux virtio-blk driver does not know of this side effect and cache flushes remain disabled The bug is at the third step. If the guest does know about CONFIG_WCE, QEMU should ignore the WCE feature's state. The guest will control the cache mode solely using configuration space. This change makes Linux do flushes correctly, but Linux will keep SeaBIOS's writethrough mode. Hence, whenever the guest is reset, the cache mode of the disk should be reset to whatever was specified in the "-drive" option. With this change, the Linux virtio-blk driver finds that writeback caching is enabled, and tells the block layer to send cache flush commands appropriately. Reported-by: Rusty Russell <rusty@au1.ibm.com Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-20kvm: Fix compiler warning (clang)Stefan Weil
Report from clang analyzer: clock.c:42:15: warning: Value stored to 'cpu' during its initialization is never read Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20q35: Fix typo in constant DEFUALT -> DEFAULT.Richard W.M. Jones
Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20Merge remote-tracking branch 'spice/spice.v74' into stagingAnthony Liguori
# By Gerd Hoffmann # Via Gerd Hoffmann * spice/spice.v74: qxl: compile only once qxl: simplify page dirtying qxl: simplify qxl_rom_size qxl: define qxl operating on 4k pages Message-id: 1379583534-7831-1-git-send-email-kraxel@redhat.com
2013-09-20s390/sclplmconsole: Add support for SCLP line-mode consoleHeinz Graalfs
Add simple support for SCLP line-mode also known as operating system messages. This can be added in addition to or instead of the SCLP full screen console with -device sclplmconsole. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20s390/eventfacility: allow childs to handle more than 1 event typeChristian Borntraeger
Currently all handlers (quiesce, console) only handle one event type. Some drivers will handle multiple (compatible) event types. Rework the code accordingly. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20s390/eventfacility: remove unused event_type variableChristian Borntraeger
The event_type variable is never used. Get rid of it. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20s390/eventfacility: fix multiple Read Event Data sourcesRalf Hoppe
Make the handler for SCLP Read Event Data deal with notifications for multiple sources correctly. Signed-off-by: Ralf Hoppe <rhoppe@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split bigger patch into smaller independent chunks] Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20s390/sclp: add reset() functionsHeinz Graalfs
Add reset() functions for event-facility, sclpconsole, and sclpquiesce. The reset() functions perform variable initialization at IPL and e.g. when monitor system_reset is called. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20s390/sclpquiesce: Add code to support live migrationHeinz Graalfs
This patch adds the necessary life migration pieces to sclpquiesce by using the vmstate_register. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20s390/sclpconsole: Add code to support live migration for sclpconsoleHeinz Graalfs
This patch adds the necessary life migration pieces to the sclp code by using vmstate_register. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20s390/sclpconsole: modify definition of input bufferHeinz Graalfs
To use VMState for migration, we need to adapt some sclp code: - allocate console buffer as part of the console - change semantic of sclpconsole offset fields Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20kvmvapic: Clear also physical ROM address when entering INACTIVE stateJan Kiszka
To avoid misinterpreting INACTIVE after migration as old qemu-kvm's STANDBY, also clear rom_state_paddr when going back to this state. CC: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-20kvmvapic: Enter inactive state on hardware resetJan Kiszka
ROM layout may change after reset of devices are hotplugged, so we have to pick up the physical address again when the ROM is initialized. This is best achieved by resetting the state to INACTIVE. CC: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-20kvmvapic: Catch invalid ROM sizeJan Kiszka
If not caught early, a zero-length ROM will cause a NULL-pointer access later on in patch_hypercalls when allocating a zero-length ROM copy and trying to read from it. CC: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-19usb: Fix iovec memleak on combined-packet freeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-19usb: Also reset max_packet_size on ep_resetHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 11:10:04 +0000