aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2018-06-08aspeed: add an I2C RTC device to all machinesCédric Le Goater
The AST2500 EVB does not have an RTC but we can pretend that one is plugged on the I2C bus header. The romulus and witherspoon boards expects an Epson RX8900 I2C RTC but a ds1338 is good enough for the basic features we need. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08aspeed: add support for the witherspoon-bmc boardCédric Le Goater
The Witherspoon boards are OpenPOWER system hosting POWER9 Processors. Add support for their BMC including a couple of I2C devices as found on real HW. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08aspeed: remove ignore_memory_transaction_failures on all boardsCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180530064049.27976-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICRShannon Zhao
While we skip the GIC_INTERNAL irqs, we don't change the register offset accordingly. This will overlap the GICR registers value and leave the last GIC_INTERNAL irq's registers out of update. Fix this by skipping the registers banked by GICR. Also for migration compatibility if the migration source (old version qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then we shift the data of PPI to get the right data for SPI. Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920 Cc: qemu-stable@nongnu.org Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-079p: xattr: Properly translate xattrcreate flagsKeno Fischer
As with unlinkat, these flags come from the client and need to be translated to their host values. The protocol values happen to match linux, but that need not be true in general. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2018-06-079p: Properly check/translate flags in unlinkatKeno Fischer
The 9p-local code previously relied on P9_DOTL_AT_REMOVEDIR and AT_REMOVEDIR having the same numerical value and deferred any errorchecking to the syscall itself. However, while the former assumption is true on Linux, it is not true in general. 9p-handle did this properly however. Move the translation code to the generic 9p server code and add an error if unrecognized flags are passed. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2018-06-079p: local: Avoid warning if FS_IOC_GETVERSION is not definedKeno Fischer
Both `stbuf` and `local_ioc_getversion` where unused when FS_IOC_GETVERSION was not defined, causing a compiler warning. Reorganize the code to avoid this warning. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2018-06-079p: xattr: Fix crashes due to free of uninitialized valueKeno Fischer
If the size returned from llistxattr/lgetxattr is 0, we skipped the malloc call, leaving xattr.value uninitialized. However, this value is later passed to `g_free` without any further checks, causing an error. Fix that by always calling g_malloc unconditionally. If `size` is 0, it will return NULL, which is safe to pass to g_free. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2018-06-079p: Move a couple xattr functions to 9p-utilKeno Fischer
These functions will need custom implementations on Darwin. Since the implementation is very similar among all of them, and 9p-util already has the _nofollow version of fgetxattrat, let's move them all there. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2018-06-079p: local: Properly set errp in fstatfs error pathKeno Fischer
In the review of 9p: Avoid warning if FS_IOC_GETVERSION is not defined Grep Kurz noted this error path was failing to set errp. Fix that. Signed-off-by: Keno Fischer <keno@juliacomputing.com> [added local: to commit title, Greg Kurz] Signed-off-by: Greg Kurz <groug@kaod.org>
2018-06-079p: proxy: Fix size passed to `connect`Keno Fischer
The size to pass to the `connect` call is the size of the entire `struct sockaddr_un`. Passing anything shorter than this causes errors on darwin. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2018-06-05vfio/pci: Default display option to "off"Alex Williamson
Commit a9994687cb9b ("vfio/display: core & wireup") added display support to vfio-pci with the default being "auto", which breaks existing VMs when the vGPU requires GL support but had no previous requirement for a GL compatible configuration. "Off" is the safer default as we impose no new requirements to VM configurations. Fixes: a9994687cb9b ("vfio/display: core & wireup") Cc: qemu-stable@nongnu.org Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-05vfio/quirks: Enable ioeventfd quirks to be handled by vfio directlyAlex Williamson
With vfio ioeventfd support, we can program vfio-pci to perform a specified BAR write when an eventfd is triggered. This allows the KVM ioeventfd to be wired directly to vfio-pci, entirely avoiding userspace handling for these events. On the same micro-benchmark where the ioeventfd got us to almost 90% of performance versus disabling the GeForce quirks, this gets us to within 95%. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-05vfio/quirks: ioeventfd quirk accelerationAlex Williamson
The NVIDIA BAR0 quirks virtualize the PCI config space mirrors found in device MMIO space. Normally PCI config space is considered a slow path and further optimization is unnecessary, however NVIDIA uses a register here to enable the MSI interrupt to re-trigger. Exiting to QEMU for this MSI-ACK handling can therefore rate limit our interrupt handling. Fortunately the MSI-ACK write is easily detected since the quirk MemoryRegion otherwise has very few accesses, so simply looking for consecutive writes with the same data is sufficient, in this case 10 consecutive writes with the same data and size is arbitrarily chosen. We configure the KVM ioeventfd with data match, so there's no risk of triggering for the wrong data or size, but we do risk that pathological driver behavior might consume all of QEMU's file descriptors, so we cap ourselves to 10 ioeventfds for this purpose. In support of the above, generic ioeventfd infrastructure is added for vfio quirks. This automatically initializes an ioeventfd list per quirk, disables and frees ioeventfds on exit, and allows ioeventfds marked as dynamic to be dropped on device reset. The rationale for this latter feature is that useful ioeventfds may depend on specific driver behavior and since we necessarily place a cap on our use of ioeventfds, a machine reset is a reasonable point at which to assume a new driver and re-profile. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-05vfio/quirks: Add quirk reset callbackAlex Williamson
Quirks can be self modifying, provide a hook to allow them to cleanup on device reset if desired. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-05vfio/quirks: Add common quirk alloc helperAlex Williamson
This will later be used to include list initialization. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180604-pull-request' ↵Peter Maydell
into staging Two little vga fixes. # gpg: Signature made Mon 04 Jun 2018 09:48:53 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180604-pull-request: vga: cleanup surface handling bochs-display: add missing break Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180604' ↵Peter Maydell
into staging migration/next for 20180604 # gpg: Signature made Mon 04 Jun 2018 05:14:24 BST # gpg: using RSA key F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20180604: migration: not wait RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect migration: remove unnecessary variables len in QIOChannelRDMA migration: Don't activate block devices if using -S migration: discard non-migratable RAMBlocks migration: introduce decompress-error-check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04vga: cleanup surface handlingGerd Hoffmann
Just set the full_update flag if we need a new DisplaySurface. Create a new surface when the flag is set instead of having two places where qemu_create_displaysurface_from() is called. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180525131318.28437-1-kraxel@redhat.com
2018-06-04bochs-display: add missing breakGerd Hoffmann
Fixes: CID 1391291 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180525045344.28347-1-kraxel@redhat.com
2018-06-04migration: introduce decompress-error-checkXiao Guangrong
QEMU 3.0 enables strict check for compression & decompression to make the migration more robust, that depends on the source to fix the internal design which triggers the unexpected error conditions To make it work for migrating old version QEMU to 2.13 QEMU, we introduce this parameter to disable the error check on the destination which is the default behavior of the machine type which is older than 2.13, alternately, the strict check can be enabled explicitly as followings: -M pc-q35-2.11 -global migration.decompress-error-check=true Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01vhost-blk: turn on pre-defined RO feature bitChangpeng Liu
Read only feature shouldn't be negotiable, because if the backend device reported Read only feature supported, QEMU host driver shouldn't change backend's RO attribute. While here, also enable the vhost-user-blk test utility to test RO feature. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-01nvdimm, acpi: support NFIT platform capabilitiesRoss Zwisler
Add a machine command line option to allow the user to control the Platform Capabilities Structure in the virtualized NFIT. This Platform Capabilities Structure was added in ACPI 6.2 Errata A. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-01usb: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01sd: fix up includeMichael S. Tsirkin
include files shouldn't have the "include/" part, that is implied. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01vhost-scsi: drop an unused includeMichael S. Tsirkin
No reason for vhost-scsi to pull in migration headers directly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01ppc: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01rocker: drop an unused includeMichael S. Tsirkin
We don't use net/clients.h, drop that include. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01e1000e: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01ioapic: fix up includesMichael S. Tsirkin
include files shouldn't have the "include/" part, that is implied. Also, drop an unused include. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01ide: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01display: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01hppa: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01hw: make virtio devices configurable via default-configs/Paolo Bonzini
This is only half of the work, because the proxy devices (virtio-*-pci, virtio-*-ccw, etc.) are still included unconditionally. It is still a move in the right direction. Based-on: <20180522194943.24871-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: allow compiling out SCSIPaolo Bonzini
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01qdev: Remove DeviceClass::init() and ::exit()Philippe Mathieu-Daudé
Since no devices use it, we can safely remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-5-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Removal of DeviceClass::init() moved from previous patch, missing documentation updates supplied] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-5-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01qdev: Simplify the SysBusDeviceClass::init pathPhilippe Mathieu-Daudé
Instead of using SysBusDeviceClass::realize -> DeviceClass::realize -> DeviceClass::init -> sysbus_device_init -> SysBusDeviceClass::init Simplify the path by directly calling SysBusDeviceClass::init in SysBusDeviceClass::realize: SysBusDeviceClass::realize -> SysBusDeviceClass::init Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-4-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Removal of DeviceClass::init() moved into next patch, sysbus_realize() tweaked for clarity] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-4-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::initPhilippe Mathieu-Daudé
SMBusDeviceClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-2-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-2-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01ipmi: Use proper struct reference for KCS vmstateCorey Minyard
The vmstate for isa_ipmi_kcs was referencing into the kcs structure, instead create a kcs structure separate and use that. There were also some issues in the state transfer. The inlen field was not being transferred, so if a transaction was in process during the transfer it would be messed up. And the use_irq field was transferred, but that should come from the configuration. To fix this, the new VMS_VSTRUCT macros are used so the exact version of the structure can be specified, depending on what version was being received. So an upgrade should work for KCS. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1524670052-28373-3-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/isa/superio: Fix inconsistent use of Chardev->bePhilippe Mathieu-Daudé
4c3119a6e3e and cd9526ab7c0 introduced an incorrect and inconsistent use of Chardev->be. Also, this CharBackend member is private and is not supposed to be accessible. Fix it by removing the inconsistent check. Cc: qemu-stable@nongnu.org Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180515152500.19460-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-06-01memory: get rid of memory_region_init_reservationPaolo Bonzini
The function has been deprecated for 2.5 years, and there are just a handful of users. Convert them to memory_region_init_io with NULL callbacks, and while at it pass the right device as the owner. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01virtio: free MemoryRegionCache when initialization failsPaolo Bonzini
2018-06-01hw/ide: Remove unused includePhilippe Mathieu-Daudé
There is no need to include pci.h in this file. (Continue f23c81073a cleanup). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-21-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i386/pc: Remove unused includePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-20-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/hppa: Remove unused includePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-19-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/misc/sga: Use the correct ISA includePhilippe Mathieu-Daudé
The SGA BIOS loader is an ISA device, it does not require the PCI header. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-18-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/misc/mips_itu: Cleanup includesPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-17-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 20:29:07 +0000