| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Pirqs are not freed when driver unload, then new pirqs are allocated when
driver reload. This could exhaust pirqs if do it in a loop.
This patch fixes the bug by freeing pirqs when ENABLE bit is cleared in
msi/msix control reg.
There is also other way of fixing it such as reuse pirqs between driver reload,
but this way is better.
Xen-devel: http://marc.info/?l=xen-devel&m=136800120304275&w=2
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Some improvements for s390.
Two patches deal with address translation, one fixes a problem in the
channel subsystem code.
# gpg: Signature made Wed 07 May 2014 09:29:30 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/s390x-20140507:
s390x/css: Don't save orb in subchannel.
s390x/helper: Added format control bit to MMU translation
s390x/helper: Fixed real-to-absolute address translation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
migration/next for 20140505
# gpg: Signature made Mon 05 May 2014 21:27:24 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140505: (36 commits)
migration: expose xbzrle cache miss rate
migration: expose the bitmap_sync_count to the end
migration: Add counts of updating the dirty bitmap
XBZRLE: Fix one XBZRLE corruption issues
migration: remove duplicate code
Coverity: Fix failure path for qemu_accept in migration
Init the XBZRLE.lock in ram_mig_init
Provide init function for ram migration
Count used RAMBlock pages for migration_dirty_pages
Make qemu_peek_buffer loop until it gets it's data
Disallow outward migration while awaiting incoming migration
virtio: validate config_len on load
virtio-net: out-of-bounds buffer write on load
openpic: avoid buffer overrun on incoming migration
ssi-sd: fix buffer overrun on invalid state load
savevm: Ignore minimum_version_id_old if there is no load_state_old
usb: sanity check setup_index+setup_len in post_load
vmstate: s/VMSTATE_INT32_LE/VMSTATE_INT32_POSITIVE_LE/
virtio-scsi: fix buffer overrun on invalid state load
zaurus: fix buffer overrun on invalid state load
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
QOM/QTest infrastructure fixes and device conversions
* -device / device_add assertion fix
* QEMUMachine conversion to MachineClass
* Device error handling improvements
* QTest cleanups and test cases for some more PCI devices
* PortIO memory leak fixes
# gpg: Signature made Mon 05 May 2014 19:59:16 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
PortioList: Store PortioList in device state
tests: Add EHCI qtest
tests: Add ioh3420 qtest
tests: Add intel-hda qtests
tests: Add es1370 qtest
tests: Add ac97 qtest
qtest: Be paranoid about accept() addrlen argument
qtest: Add error reporting to socket_accept()
qtest: Assure that init_socket()'s listen() does not fail
MAINTAINERS: Document QOM
arm: Clean up fragile use of error_is_set() in realize() methods
qom: Clean up fragile use of error_is_set() in set() methods
hw: Consistently name Error ** objects errp, and not err
hw: Consistently name Error * objects err, and not errp
machine: Remove QEMUMachine indirection from MachineClass
machine: Replace QEMUMachine by MachineClass in accelerator configuration
vl.c: Replace QEMUMachine with MachineClass in QEMUMachineInitArgs
machine: Copy QEMUMachine's fields to MachineClass
machine: Remove obsoleted field from QEMUMachine
qdev: Fix crash by validating the object type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Current css code saves the operation request block (orb) in the
subchannel structure for later consumption by the start function
handler. This might make sense for asynchronous execution of the
start function (which qemu doesn't support), but not in our case;
it would even be wrong since orb contains a reference to a local
variable in the base ssch handler.
Let's just pass the orb through the start function call chain for
ssch; for rsch, we can pass NULL as the backend function does not
use any information passed via the orb there.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
ohci live migration.
mtp bugfixes.
# gpg: Signature made Mon 05 May 2014 12:08:48 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-6:
usb: mtp: reply INCOMPLETE_TRANSFER on read errors
usb: mtp: fix possible buffer overflow
usb: mtp: drop data-out hexdump
usb: mtp: avoid empty description string
usb: mtp: fix error path memory leak
usb: mtp: fix serial (must be exact 32 chars)
usb: mtp: fix version (is decimal not bcd)
usb: mtp: fix usb_mtp_add_u64
usb: mtp: replace debug printfs with trace points
usb-ohci: Add vmstate descriptor
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Malformed input can have config_len in migration stream
exceed the array size allocated on destination, the
result will be heap overflow.
To fix, that config_len matches on both sides.
CVE-2014-0182
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
v2: use %ix and %zx to print config_len values
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4149 QEMU 1.3.0 out-of-bounds buffer write in
virtio_net_load()@hw/net/virtio-net.c
> } else if (n->mac_table.in_use) {
> uint8_t *buf = g_malloc0(n->mac_table.in_use);
We are allocating buffer of size n->mac_table.in_use
> qemu_get_buffer(f, buf, n->mac_table.in_use * ETH_ALEN);
and read to the n->mac_table.in_use size buffer n->mac_table.in_use *
ETH_ALEN bytes, corrupting memory.
If adversary controls state then memory written there is controlled
by adversary.
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4534
opp->nb_cpus is read from the wire and used to determine how many
IRQDest elements to read into opp->dst[]. If the value exceeds the
length of opp->dst[], MAX_CPU, opp->dst[] can be overrun with arbitrary
data from the wire.
Fix this by failing migration if the value read from the wire exceeds
MAX_CPU.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4537
s->arglen is taken from wire and used as idx
in ssi_sd_transfer().
Validate it before access.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4541
s->setup_len and s->setup_index are fed into usb_packet_copy as
size/offset into s->data_buf, it's possible for invalid state to exploit
this to load arbitrary data.
setup_len and setup_index should be checked to make sure
they are not negative.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
As the macro verifies the value is positive, rename it
to make the function clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4542
hw/scsi/scsi-bus.c invokes load_request.
virtio_scsi_load_request does:
qemu_get_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
this probably can make elem invalid, for example,
make in_num or out_num huge, then:
virtio_scsi_parse_req(s, vs->cmd_vqs[n], req);
will do:
if (req->elem.out_num > 1) {
qemu_sgl_init_external(req, &req->elem.out_sg[1],
&req->elem.out_addr[1],
req->elem.out_num - 1);
} else {
qemu_sgl_init_external(req, &req->elem.in_sg[1],
&req->elem.in_addr[1],
req->elem.in_num - 1);
}
and this will access out of array bounds.
Note: this adds security checks within assert calls since
SCSIBusInfo's load_request cannot fail.
For now simply disable builds with NDEBUG - there seems
to be little value in supporting these.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4540
Within scoop_gpio_handler_update, if prev_level has a high bit set, then
we get bit > 16 and that causes a buffer overrun.
Since prev_level comes from wire indirectly, this can
happen on invalid state load.
Similarly for gpio_level and gpio_dir.
To fix, limit to 16 bit.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4539
s->precision, nextprecision, function and nextfunction
come from wire and are used
as idx into resolution[] in TSC_CUT_RESOLUTION.
Validate after load to avoid buffer overrun.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4538
s->cmd_len used as index in ssd0323_transfer() to store 32-bit field.
Possible this field might then be supplied by guest to overwrite a
return addr somewhere. Same for row/col fields, which are indicies into
framebuffer array.
To fix validate after load.
Additionally, validate that the row/col_start/end are within bounds;
otherwise the guest can provoke an overrun by either setting the _end
field so large that the row++ increments just walk off the end of the
array, or by setting the _start value to something bogus and then
letting the "we hit end of row" logic reset row to row_start.
For completeness, validate mode as well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4533
s->rx_level is read from the wire and used to determine how many bytes
to subsequently read into s->rx_fifo[]. If s->rx_level exceeds the
length of s->rx_fifo[] the buffer can be overrun with arbitrary data
from the wire.
Fix this by validating rx_level against the size of s->rx_fifo.
Cc: Don Koch <dkoch@verizon.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4535
CVE-2013-4536
Both virtio-block and virtio-serial read,
VirtQueueElements are read in as buffers, and passed to
virtqueue_map_sg(), where num_sg is taken from the wire and can force
writes to indicies beyond VIRTQUEUE_MAX_SIZE.
To fix, validate num_sg.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-6399
vdev->queue_sel is read from the wire, and later used in the
emulation code as an index into vdev->vq[]. If the value of
vdev->queue_sel exceeds the length of vdev->vq[], currently
allocated to be VIRTIO_PCI_QUEUE_MAX elements, subsequent PIO
operations such as VIRTIO_PCI_QUEUE_PFN can be used to overrun
the buffer with arbitrary data originating from the source.
Fix this by failing migration if the value from the wire exceeds
VIRTIO_PCI_QUEUE_MAX.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4530
pl022.c did not bounds check tx_fifo_head and
rx_fifo_head after loading them from file and
before they are used to dereference array.
Reported-by: Michael S. Tsirkin <mst@redhat.com
Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
4) CVE-2013-4529
hw/pci/pcie_aer.c pcie aer log can overrun the buffer if log_num is
too large
There are two issues in this file:
1. log_max from remote can be larger than on local
then buffer will overrun with data coming from state file.
2. log_num can be larger then we get data corruption
again with an overflow but not adversary controlled.
Fix both issues.
Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4527 hw/timer/hpet.c buffer overrun
hpet is a VARRAY with a uint8 size but static array of 32
To fix, make sure num_timers is valid using VMSTATE_VALID hook.
Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4526
Within hw/ide/ahci.c, VARRAY refers to ports which is also loaded. So
we use the old version of ports to read the array but then allow any
value for ports. This can cause the code to overflow.
There's no reason to migrate ports - it never changes.
So just make sure it matches.
Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
CVE-2013-4151 QEMU 1.0 out-of-bounds buffer write in
virtio_load@hw/virtio/virtio.c
So we have this code since way back when:
num = qemu_get_be32(f);
for (i = 0; i < num; i++) {
vdev->vq[i].vring.num = qemu_get_be32(f);
array of vqs has size VIRTIO_PCI_QUEUE_MAX, so
on invalid input this will write beyond end of buffer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
PortioList is an abstraction used for construction of MemoryRegionPortioList
from MemoryRegionPortio. It can be used later to unmap created memory regions.
It also requires proper cleanup because some of the memory inside is allocated
dynamically.
By moving PortioList ot device state we make it possible to cleanup later and
avoid leaking memory.
This change spans several target platforms. The following testcases cover all
changed lines:
qemu-system-ppc -M prep
qemu-system-i386 -vga qxl
qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
I guess the error_is_set(errp) in the DeviceClass realize() methods
are merely fragile right now, because I can't find a call chain that
passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
I guess the error_is_set(errp) in the ObjectProperty set() methods are
merely fragile right now, because I can't find a call chain that
passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
No need to go through qemu_machine field. Use
MachineClass fields directly.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
In order to eliminate the QEMUMachine indirection,
add its fields directly to MachineClass.
Do not yet remove qemu_machine field because it is
still in use by sPAPR.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
[AF: Copied fields for sPAPR, too]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
CVE-2013-4150 QEMU 1.5.0 out-of-bounds buffer write in
virtio_net_load()@hw/net/virtio-net.c
This code is in hw/net/virtio-net.c:
if (n->max_queues > 1) {
if (n->max_queues != qemu_get_be16(f)) {
error_report("virtio-net: different max_queues ");
return -1;
}
n->curr_queues = qemu_get_be16(f);
for (i = 1; i < n->curr_queues; i++) {
n->vqs[i].tx_waiting = qemu_get_be32(f);
}
}
Number of vqs is max_queues, so if we get invalid input here,
for example if max_queues = 2, curr_queues = 3, we get
write beyond end of the buffer, with data that comes from
wire.
This might be used to corrupt qemu memory in hard to predict ways.
Since we have lots of function pointers around, RCE might be possible.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Build an aggregate set of smbios tables and an entry point structure.
Insert tables and entry point into fw_cfg respectively under
"etc/smbios/smbios-tables" and "etc/smbios/smbios-anchor".
Machine types <= 2.0 will for now continue using field-by-field
overrides to SeaBIOS defaults, but for machine types 2.1 and up we
expect the BIOS to look for and use the aggregate tables generated
by this patch.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
[ kraxel: fix 32bit build ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This adds migration support for OHCI.
This defines a descriptor for OHCIState.
This changes some OHCIState field types to be migration compatible.
This adds a descriptor for OHCIPort.
This migrates the EOF timer if the USB was started at the time of
migration.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Replace existing smbios_check_collision() functionality with
a pair of bitmaps: have_binfile_bitmap and have_fields_bitmap.
Bits corresponding to each smbios type are set by smbios_entry_add(),
which also uses the bitmaps to ensure that binary blobs and field
values are never accepted for the same type.
These bitmaps will also be used in the future to decide whether
or not to build a full table for a given smbios type.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The function smbios_set_defaults() uses a repeating code pattern
for each field. This patch replaces that pattern with a macro.
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Rename the following symbols:
- smbios_set_type1_defaults() to the more general smbios_set_defaults();
- bool smbios_type1_defaults to the more general smbios_defaults;
- smbios_get_table() to smbios_get_table_legacy();
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add the following two functions:
- e820_get_num_entries() - query the size of the e820 table
- e820_get_entry() - grab an entry matching a given set of criteria
This interface is currently necessary for creating type 19
(memory array mapped address) structures in smbios.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
At the moment, 2.1 and 2.0 machines are identical.
As several people are working on incompatible changes
to the PC machine, collaboration will be made easier
by merging this place-holder.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
'remotes/pmaydell/tags/pull-target-arm-20140501' into staging
target-arm queue:
* implement XScale cache lockdown cp15 ops
* fix v7M CPUID base register
* implement WFE and YIELD as yields for A64
* fix A64 "BLR LR"
* support Cortex-A57 in virt machine model
* a few other minor AArch64 bugfixes
# gpg: Signature made Thu 01 May 2014 15:42:17 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140501:
hw/arm/virt: Add support for Cortex-A57
hw/arm/virt: Put GIC register banks on 64K boundaries
hw/arm/virt: Create the GIC ourselves rather than (ab)using a15mpcore_priv
target-arm: Correct a comment refering to EL0
target-arm: A64: Fix a typo when declaring TLBI ops
target-arm: A64: Handle blr lr
target-arm: Make vbar_write 64bit friendly on 32bit hosts
target-arm: implement WFE/YIELD as a yield for AArch64
armv7m_nvic: fix CPUID Base Register
target-arm: Implement XScale cache lockdown operations as NOPs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
