aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2010-11-22ioh3420: support aerIsaku Yamahata
Add aer support. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22pcie_aer: complete unwinding recursionMichael S. Tsirkin
Open-code functions created in the previous patch, to make code more compact and clear. Detcted and documented what looks like a bug in code that becomes apparent from this refactoring. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22pcie_aer: get rid of recursionMichael S. Tsirkin
Added some TODOs: they are trivial but omitted here to make the patch logic as transparent as possible. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22pcie/aer: helper functions for pcie aer capabilityIsaku Yamahata
This patch implements helper functions for pcie aer capability which will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22pcie_regs.h: more constantsIsaku Yamahata
Add constants for PCI AER log. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22pci: add W1C bits to pci status registerIsaku Yamahata
This patch adds W1C bit support in the initialization/reset of pci status registers. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-16pci: allow hotplug removal of cold-plugged devicesMichael S. Tsirkin
This patch fixes hot unplug of cold plugged devices (those present at system start), which got broken by 5beb8ad503c88a76f2b8106c3b74b4ce485a60e1 . Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cam Macdonell <cam@cs.ualberta.ca> Tested-by: Cam Macdonell <cam@cs.ualberta.ca> Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.
2010-11-16PCI: Bus number from the bridge, not the deviceAlex Williamson
pcibus_dev_print() was erroneously retrieving the device bus number from the secondary bus number offset of the device instead of the bridge above the device. This ends of landing in the 2nd byte of the 3rd BAR for devices, which thankfully is usually zero. Note: pcibus_get_dev_path() copied this code, inheriting the same bug. pcibus_get_dev_path() is used for ramblock naming, so changing it can effect migration. However, I've only seen this byte be non-zero for an assigned device, which can't migrate anyway, so hopefully we won't run into any issues. This patch does not touch pcibus_get_dev_path, as bus number is guest assigned for nested buses, so using it for migration is broken anyway. Fix it properly later. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-13e1000: Fix TCP checksum overflow with TSOAlex Williamson
When adding the length to the pseudo header, we're not properly accounting for overflow. From: Mark Wu <dwu@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-01Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-11-01hda-audio: Zap tabsmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-11-01Add Intel HD Audio support to qemu.Gerd Hoffmann
This patch adds three devices to qemu: intel-hda Intel HD Audio Controller, the PCI device. Provides a HDA bus. Emulates ICH6 at the moment. Adding a ICH9 PCIE variant shouldn't be hard. hda-duplex HDA Codec. Attaches to the HDA bus. Supports 16bit stereo, rates 16k -> 96k, playback, recording and volume control (with CONFIG_MIXEMU=y). hda-output HDA Codec without recording support. Subset of the hda-duplex codec. Use this if you don't want your guests access your mic. Usage: add '-device intel-hda -device hda-duplex' to your command line. Tested guests: * Linux works. * Win7 works. * DOS (mpxplay) works. * WinXP doesn't work. [ v2 changes ] * Fixed endianess, big endian hosts work now. * Fixed some emulation bugs. * Added immediate command emulation. * Added vmstate support. * Make it behave like all other sound card drivers: - can be configured via '--audio-card-list=hda' - can be added to a VM using '-soundhw hda' * Code style fixups. * Zapped guest-triggerable asserts. * Handle partial reads/writes of audio data correctly. Cc: malc <av1474@comtv.ru> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2010-11-01add VMSTATE_BOOLGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2010-10-31sparc32: convert debug printf statements to tracepointsBlue Swirl
Replace debug printf statements with tracepoints. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-30Do not redefine reserved key-words TRUE/FALSEJes Sorensen
TRUE/FALSE are generally reserved keywords and shouldn't be defined in a driver like this. Rename the macros to SDP_TRUE and SDP_FALSE respectively. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-30Mov muldiv64 to qemu-common.h (Thus unbreaking gus)malc
Signed-off-by: malc <av1474@comtv.ru>
2010-10-27Merge branch 'pci' into for_anthonyMichael S. Tsirkin
2010-10-27pcie: update satus on resetMichael S. Tsirkin
Reset never triggers a new event, so it's enough to update status. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27msi: minor cleanupsMichael S. Tsirkin
Comment fixup (tell what it does not what it does not do), typo fix, whitespace fix. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27msi: simplify range checksMichael S. Tsirkin
config write handlers should be idempotent. So no need for complex range checks: a simple one checking that we are touching the relevant capability will do. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27pci: improve w1c mask handlingMichael S. Tsirkin
- save/restore must not check w1c bits since they are in fact guest controlled - clear w1c bits on reset Note: for express there are different kinds of reset, some leave part of config space alone. We will likely need a sticky bit mask to implement this. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27pcie: clean up hot plug notificationMichael S. Tsirkin
Simplify logic for hotplug notification, by tracking state of the logical interrupt condition. We then simply use this variable to make the interrupt decision, according to spec. API is made cleaner as we no longer force users to pass in old slot control value. Includes fixes by Isaku Yamahata. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-10-27pcie: simplify range checkMichael S. Tsirkin
Simplify code slighly by reversing the polarity for the range check Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-10-27Introduce range.hBlue Swirl
Extract range functions from pci.h. These will be used by later patches by non-PCI devices. Adjust current users. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> (cherry picked from commit bf1b00712375bea65f2254dea8281fa646eebbd5)
2010-10-27virtio: sanity-check available indexMichael S. Tsirkin
Checking available index upon load instead of only when vm is running makes is easier to debug failures. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-26Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-10-23qemu-timer: move commonly used timer code to qemu-timer-commonBlue Swirl
Move timer init functions to a new file, qemu-timer-common.c. Make other critical timer functions inlined to preserve performance in qemu-timer.c, also move muldiv64() (used by the inline functions) to qemu-timer.h. Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly. Remove a similar/duplicate definition in qemu-tool.c. Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used there. After this change, tracing can be used also for user code and simpletrace on Win32. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-22mips_fulong2e: fix ram allocationBlue Swirl
RAM registration used incorrect offset. Fix by using the offset obtained previously for this purpose. Spotted by GCC 4.6.0 20100925 warning, which is also avoided. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-22virtio-blk: Respect werror option for flushesKevin Wolf
The werror option now affects not only write requests, but also flush requests. Previously, it was not possible to stop a VM on a failed flush. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22ide: Handle flush failureKevin Wolf
Instead of always assuming success for bdrv_aio_flush, actually do something with the error. This respects the werror option and accordingly ignores the error, reports it to the guest or stops the VM and retries after cont. Ignoring the error is trivial, obviously. For stopping the VM and retrying later old code can be reused, but we need to introduce a new status for "retry a flush". For reporting to the guest, fortunately the same action is required as for a failed read/write (status = DRDY | ERR, error = ABRT), so this code can be reused as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22ide: Factor ide_flush_cache outKevin Wolf
The next patch reuses this code, so put it in its own function. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22ide: set WCACHE supported in IDENTIFY dataChristoph Hellwig
ATA does not only have the WCACHE enabled bit in identify word 85, but also a WCACHE supported bit in word 82. While the Linux kernel is fine with the latter at least hdparm also needs the former before correctly displaying the cache settings. There's also a non-zero chance other operating systems are more picky in their volatile write cache detection. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-20Fix pci hotplug to generate level triggered interrupt.Gleb Natapov
SCI is level triggered. pci hotplug should behave appropriately. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20Use defines instead of numbers for pci hotplug sts bitGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20wacom tablet: activate event handlers.Gerd Hoffmann
Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so it actually receives events. Also make sure we only remove the handler if we registered it before. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20vmmouse: adapt to mouse handler changes.Gerd Hoffmann
This patch updates the vmmouse handler registration and activation. Old behavior: vmmouse_read_id, vmmouse_request_relative and vmmouse_request_absolute unregister the handler and re-register it. New behavior: vmmouse_request_relative and vmmouse_request_absolute will unregister the handler in case the mode did change. Then register and active the handler with current mode if needed. Note that the old code never ever *activates* the handler, so the vmmouse doesn't receive events. This trips up Fedora 14 for example: Boot a default install without usb tablet, watch the X-Server activating the vmmouse then, enjoy a non-functional mouse. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20[virtio-9p] Add support to v9fs_string_alloc_printf() for handling %lu.Venkateswararao Jujjuri (JV)
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20[virtio-9p] Use preadv/pwritev instead of readv/writevSanchit Garg
readv & writev, read & write respectively from the current offset of the file & hence their use has to be preceeded by a call to lseek. preadv/writev can be used instead, as they take the offset as an argument. This saves one system call( lseek ). In case preadv is not supported, it is implemented by an lseek followed by a readv. Depending upon the configuration of QEMU, the appropriate read & write methods are selected. This patch also fixes the zero byte read/write bug & obviates the need to apply a fix for that bug separately. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Sanchit Garg <sancgarg@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20[virtio-9p] Qemu 9p commandline options validity checksHarsh Prateek Bora
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20virtio-9p: Support mapped posix aclAneesh Kumar K.V
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20virtio-9p: Use layered xattr approachAneesh Kumar K.V
We would need this to make sure we handle the mapped security model correctly for different xattr names. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20[virtio-9p] Ignore O_DIRECT hint from client.Venkateswararao Jujjuri (JV)
The O_DIRECT flag imposes alignment restrictions on the length and address of userspace buffers and the file offset of I/Os. While VirtFS/9P has plans to implement O_DIRECT behavior on the server, for now we will stick to a behavior like NFS by bypassing the page cache only on the client. Server may still cache the I/O. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20qemu-virtio-9p: Implement TREADLINK operation for 9p2000.LM. Mohan Kumar
Synopsis size[4] TReadlink tag[2] fid[4] size[4] RReadlink tag[2] target[s] Description Readlink is used to return the contents of the symoblic link referred by fid. Contents of symboic link is returned as a response. target[s] - Contents of the symbolic link referred by fid. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20[virtio-9p] Introduce server side TFSYNC/RFSYNC for dotlVenkateswararao Jujjuri (JV)
SYNOPSIS size[4] Tfsync tag[2] fid[4] size[4] Rfsync tag[2] DESCRIPTION The Tfsync transaction transfers ("flushes") all modified in-core data of file identified by fid to the disk device (or other permanent storage device) where that file resides. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20qemu-virtio9p: Implement TGETLOCKM. Mohan Kumar
Synopsis size[4] TGetlock tag[2] fid[4] getlock[n] size[4] RGetlock tag[2] getlock[n] Description TGetlock is used to test for the existence of byte range posix locks on a file identified by given fid. The reply contains getlock structure. If the lock could be placed it returns F_UNLCK in type field of getlock structure. Otherwise it returns the details of the conflicting locks in the getlock structure getlock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK start[8] - Starting offset for lock length[8] - Number of bytes to lock If length is 0, lock all bytes starting at the location 'start' through to the end of file proc_id[4] - process id that wants to take lock/owns the task in case of reply client[4] - Client id of the system that owns the process Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20[virto-9p] Implement TLOCKM. Mohan Kumar
Synopsis size[4] TLock tag[2] fid[4] flock[n] size[4] RLock tag[2] status[1] Description Tlock is used to acquire/release byte range posix locks on a file identified by given fid. The reply contains status of the lock request flock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK flags[4] - Flags could be either of P9_LOCK_FLAGS_BLOCK(1) - Blocked lock request, if there is a conflicting lock exists, wait for that lock to be released. P9_LOCK_FLAGS_RECLAIM(2) - Reclaim lock request, used when client is trying to reclaim a lock after a server restrart (due to crash) start[8] - Starting offset for lock length[8] - Number of bytes to lock If length is 0, lock all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock client_id[4] - Unique client id status[1] - Status of the lock request, can be P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or P9_LOCK_GRACE(3) P9_LOCK_SUCCESS - Request was successful P9_LOCK_BLOCKED - A conflicting lock is held by another process P9_LOCK_ERROR - Error while processing the lock request P9_LOCK_GRACE - Server is in grace period, it can't accept new lock requests in this period (except locks with P9_LOCK_FLAGS_RECLAIM flag set) Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20[virtio-9p] open should not return EBADFSripathi Kodi
When 9P server fails to create a file due to permission problems it should return EPERM. However the current 9P2000.L code returns EBADF. EBADF is NOT a valid return value from open() call. The problem is because we do not preserve the errno variable properly. If the file open had failed, the call to close() on the fd in v9fs_post_lcreate() fails and sets errno to EBADF. We should preserve the errno that we got from open() and we should call close() only if we had a valid fd. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20apic: convert debug printf statements to tracepointsBlue Swirl
Replace debug printf statements with tracepoints. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-20x3130: pcie downstream portIsaku Yamahata
Implement TI x3130 pcie downstream port switch. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20x3130: pcie upstream portIsaku Yamahata
Implement TI x3130 pcie upstream port switch. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-10 01:46:31 +0000