aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2011-05-08pci: Use of qemu_put_ram_ptr in pci_add_option_rom.John Baboval
Prevent a deadlock caused by leaving a map cache bucket locked by the preceding qemu_get_ram_ptr() call. Signed-off-By: John Baboval <john.baboval@virtualcomputer.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Introduce the Xen mapcacheJun Nakajima
On IA32 host or IA32 PAE host, at present, generally, we can't create an HVM guest with more than 2G memory, because generally it's almost impossible for Qemu to find a large enough and consecutive virtual address space to map an HVM guest's whole physical address space. The attached patch fixes this issue using dynamic mapping based on little blocks of memory. Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the lock option, so mapcache will not unmap these ram_ptr. Blocks that do not belong to the RAM, but usually to a device ROM or to a framebuffer, are handled in a separate function. So the whole RAMBlock can be map. Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Introduce Xen Interrupt ControllerAnthony PERARD
Every set_irq call makes a Xen hypercall. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08piix_pci: Introduces Xen specific call for irq.Anthony PERARD
This patch introduces Xen specific call in piix_pci. The specific part for Xen is in write_config, set_irq and get_pirq. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08pc, Disable vmport initialisation with Xen.Anthony PERARD
This is because there is not synchronisation of the vcpu register between Xen and QEMU, so vmport can't work properly. This patch introduces no_vmport parameter to pc_basic_device_init. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Add xenfv machineAnthony PERARD
Introduce the Xen FV (Fully Virtualized) machine to Qemu, some more Xen specific call will be added in further patches. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08pc_memory_init: Move memory calculation to the caller.Anthony PERARD
This patch moves above_4g_mem_size and below_4g_mem_size calculation in the caller of pc_memory_init (pc_init1). And the prototype of pc_memory_init is changed because there is no need anymore to have variable pointer and the ram_size parameter. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Add initialisation of XenAnthony PERARD
The xenpv machine use the common init function. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Support new libxc calls from xen unstable.Anthony PERARD
This patch updates the libxenctrl calls in Qemu to use the new interface, otherwise Qemu wouldn't be able to build against new versions of the library. We check libxenctrl version in configure, from Xen 3.3.0 to Xen unstable. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Replace some tab-indents with spaces (clean-up).Anthony PERARD
And put braces for blocks with a single statement. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08machine, Add default_machine_opts to QEMUMachine.Anthony PERARD
With this new field, we can specified which accelerator use to run the machine, if the accelerator is not already specified by either a configuration file or the command line options. Currently, the only use will be made in the xenfv machine. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-05Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
2011-05-05Merge remote-tracking branch 'kraxel/usb.7.pull' into stagingAnthony Liguori
2011-05-05Merge remote branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: exec.c
2011-05-05pci: Add class 0x403 as 'audio controller'Jan Kiszka
Used by HD audio controllers like our intel-hda. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05MSI: Robust resource releaseJan Kiszka
msi_init may fail, so we need to check on uninit if the cap was actually installed. This also avoids that the users need to check. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support 32 bit read/write access to flash registerStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte read access to general control registerStefan Weil
The general control register is a byte register. Add support for byte reads. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte/word read/write access to MDI control registerStefan Weil
MDI control is a 32 bit register, but may be read or written using 8 or 16 bit access. Data is latched when the MSB is written. Add support for byte/word read/write access. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte/word writes to pointer registerStefan Weil
pointer is a 32 bit register, but may be written using 8 or 16 bit writes. Add support for byte/word writes. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte/word writes to port addressStefan Weil
port is a 32 bit register, but may be written using 8 or 16 bit writes. Add support for byte/word writes. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Fix endianness issuesStefan Weil
Like other Intel devices, e100 (eepro100) uses little endian byte order. This patch was tested with these combinations: i386 host, i386 + mipsel guests (le-le) mipsel host, i386 guest (le-le) i386 host, mips + ppc guests (le-be) mips host, i386 guest (be-le) mips and mipsel hosts were emulated machines. v2: Use prefix for new functions. Add the same prefix to stl_le_phys. Fix alignment of mem (needed for word/dword reads/writes). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Pad received short framesStefan Weil
QEMU sends frames smaller than 60 bytes to ethernet nics. Such frames are rejected by real NICs and their emulations. To avoid this behaviour, other NIC emulations pad received frames. This patch enables this workaround for eepro100, too. All related code is marked with CONFIG_PAD_RECEIVED_FRAMES, so we can drop this in case QEMU's networking code is ever changed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Remove unused structure elementStefan Weil
cppcheck reports that 'packet' is unused. It was only used to calculate the size of the preceding data. Removing it saves a lot of stack space (local variable rx). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Remove type casts which are no longer neededStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Avoid duplicate debug messagesStefan Weil
When DEBUG_EEPRO100 was enabled, unsupported writes were logged twice. Now logging in eepro100_write1 and eepro100_write2 is similar to the logging in eepro100_write4 (which already was correct). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-04usb: mass storage fixGerd Hoffmann
Initialize scsi_len with zero when starting a new request, so any stuff leftover from the previous request is cleared out. This may happen in case the data returned by the scsi command doesn't fit into the buffer provided by the guest. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-04usb: move complete callback to port opsGerd Hoffmann
2011-05-04musb: get musb state via container_of()Gerd Hoffmann
2011-05-04ohci: get ohci state via container_of()Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-04uhci: keep uhci state pointer in async packet struct.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-04uhci: switch to QTAILQGerd Hoffmann
2011-05-04usb: control buffer fixesHans de Goede
Windows allows control transfers to pass up to 4k of data, so raise our control buffer size to 4k. For control out transfers the usb core code copies the control request data to a buffer before calling the device's handle_control callback. Add a check for overflowing the buffer before copying the data. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2011-05-03spice: drop obsolete iothread lockingGerd Hoffmann
We don't use qemu internals from spice server context any more. Thus we don't also need to grab the iothread mutex from spice server context. And we don't have to temporarely release the lock to avoid deadlocks. Drop all the calls. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-03spice: don't call displaystate callbacks from spice server context.Gerd Hoffmann
This patch moves the displaystate callback calls for setting the cursor and the mouse pointer from spice server to qemu (iothread) context. This allows us to simplify locking. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-03spice: don't create updates in spice server context.Gerd Hoffmann
This patch moves the creation of spice screen updates from the spice server context to qemu iothread context (display refresh timer to be exact). This way we avoid accessing qemu internals (display surface) from spice thread context which in turn allows us to simplify locking. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-03ide/atapi: fix set but unusedAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Acked-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-03atapi: Explain why we need a 'media not present' stateAmit Shah
After the re-org of the atapi code, it might not be intuitive for a reader of the code to understand why we're inserting a 'media not present' state between cd changes. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-03atapi: Move comment to proper placeAmit Shah
Move misplaced comment for media_is_dvd() Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-03lm32: add Milkymist Minimac2 supportMichael Walle
This patch adds support for Milkymist's minimal Ethernet MAC v2. It superseds minimac1. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-05-03milkymist-sysctl: fix timersMichael Walle
Prevent timers from firing right after starting. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-05-03milkymist-vgafb: fix console resizingMichael Walle
After enabling the framebuffer, ensure that the console is resized. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-05-02kvm: create kvmclock when one of the flags are presentGlauber Costa
kvmclock presence can be signalled by two different flags. So for device creation, we have to test for both. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-28Merge remote-tracking branch 'amitshah/for-anthony' into stagingAnthony Liguori
2011-04-28Merge remote-tracking branch 'jvrao/for-anthony' into stagingAnthony Liguori
2011-04-28virtio-serial: Fix endianness bug in the config spaceAlexey Kardashevskiy
The virtio serial specification requres that the values in the config space are encoded in native endian of the guest. The qemu virtio-serial code did not do conversion to the guest endian format what caused problems when host and guest use different format. This patch corrects the qemu side, correctly doing host-native <-> guest-native conversions when accessing the config space. This won't break any setups that aren't already broken, and fixes the case of different host and guest endianness. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-04-28char: Allow devices to use a single multiplexed chardev.Kusanagi Kouichi
This fixes regression caused by commit 2d6c1ef40f3678ab47a4d14fb5dadaa486bfcda6 ("char: Prevent multiple devices opening same chardev"): -nodefaults -nographic -chardev stdio,id=stdio,mux=on,signal=off \ -mon stdio -device virtio-serial-pci \ -device virtconsole,chardev=stdio -device isa-serial,chardev=stdio fails with: qemu-system-x86_64: -device isa-serial,chardev=stdio: Property 'isa-serial.chardev' can't take value 'stdio', it's in use Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-04-28virtio-console: notify backend of guest open / closeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-04-27ioapic: Do not set irr for masked edge IRQsJan Kiszka
So far we set IRR for edge IRQs even if the pin is masked. If the guest later on unmasks and switches the pin to level-triggered mode, irr will remain set, causing an IRQ storm. The point is that setting IRR is not correct in this case according to the spec, and avoiding this resolves the issue. Reported-and-tested-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-27v9fs_walk: As per 9p2000 RFC, MAXWELEM >= nwnames >= 0.Harsh Prateek Bora
The nwnames field in TWALK message is assumed to be >=0 and <= MAXWELEM which is defined as macro P9_MAXWELEM (16) in virtio-9p.h as per 9p2000 RFC. Appropriate changes are required in V9fsWalkState and v9fs_walk. Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-30 16:00:42 +0000