aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2016-01-11net/vmxnet3: return correct value for VMXNET3_CMD_GET_DID_* commandMiao Yan
VMXNET3_CMD_GET_DID_LO should return PCI ID of the device and VMXNET3_CMD_GET_DID_HI should return vmxnet3 revision ID. This behavior can be observed by the following steps: 1) run a Linux distro on esxi server (5.x+) 2) modify vmxnet3 Linux driver to read DID_HI and DID_LO: VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DID_LO); lo = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DID_HI); high = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); pr_info("vmxnet3 DID lo: 0x%x, high: 0x%x\n", lo, high); The kernel log will have something like the following message: [ 7005.111170] vmxnet3 DID lo: 0x7b0, high: 0x1 Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net/vmxnet3: return 1 on device activation failureMiao Yan
When reading device status, 0 means device is successfully activated and 1 means error. This behavior can be observed by the following steps: 1) run a Linux distro on esxi server (5.5+) 2) modify vmxnet3 Linux driver to give it an invalid address to 'adapter->shared_pa' which is the shared memory for guest/host communication This will trigger device activation failure and kernel log will have the following message: [ 7138.403256] vmxnet3 0000:03:00.0 eth1: Failed to activate dev: error 1 So return 1 on device activation failure instead of -1; Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net: vmxnet3: avoid memory leakage in activate_deviceP J P
Vmxnet3 device emulator does not check if the device is active before activating it, also it did not free the transmit & receive buffers while deactivating the device, thus resulting in memory leakage on the host. This patch fixes both these issues to avoid host memory leakage. Reported-by: Qinghao Tang <luodalongde@gmail.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net/vmxnet3: remove redundant VMW_SHPRN(...) definitionMiao Yan
Macro VMW_SHPRN(...) is already defined vmxnet3_debug.h, so remove the duplication Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net/vmxnet3: fix debug macro pattern for vmxnet3Miao Yan
Vmxnet3 uses the following debug macro style: #ifdef SOME_DEBUG # define debug(...) do{ printf(...); } while (0) # else # define debug(...) do{ } while (0) #endif If SOME_DEBUG is undefined, then format string inside the debug macro will never be checked by compiler. Code is likely to break in the future when SOME_DEBUG is enabled because of lack of testing. This patch changes this to the following: #define debug(...) \ do { if (SOME_DEBUG_ENABLED) printf(...); } while (0) Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net/vmxnet3: use %zu for size_t in printfMiao Yan
Use %zu specifier for size_t in printf, otherwise build would fail on platforms where size_t is not unsigned long Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net/vmxnet3: fix a build error when enabling debug outputMiao Yan
Macro MAC_FMT and MAC_ARG are not defined, but used in vmxnet3_net_init(). This will cause build error when debug level is raised in vmxnet3_debug.h (enable all VMXNET3_DEBUG_xxx). Use VMXNET_MF and VXMNET_MA instead. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11hw/ppc/spapr_rtc: Remove bad class_size valueThomas Huth
class_size = sizeof(XICSStateClass) does not make much sense in the RTC code and likely was just a copy-n-paste error. Let's simply remove it. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-09virtio: fix error message for number of queuesCornelia Huck
There's no such thing as "PCI queues" in the virtio core. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09ivshmem: Store file descriptor for vhost-user negotiationTetsuya Mukawa
If virtio-net driver allocates memory in ivshmem shared memory, vhost-net will work correctly, but vhost-user will not work because a fd of shared memory will not be sent to vhost-user backend. This patch fixes ivshmem to store file descriptor of shared memory. It will be used when vhost-user negotiates vhost-user backend. Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09migration/virtio: Remove simple .get/.put useDr. David Alan Gilbert
The 'virtqueue_state' and 'ringsize' can be saved using VMSTATE macros rather than hand coded .get/.put Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com>
2016-01-09i386/pc: expose identifying the floppy controllerRoman Kagan
Factor out and expose the function to locate the floppy controller in the system. It will allow to dynamically populate the relevant objects in the ACPI tables. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: qemu-block@nongnu.org Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: remove unused ASL templates and related blobs/utilsIgor Mammedov
QEMU now uses internally composed DSDT so drop now empty *.dsl templates and related *.generated binary blobs. Also since templates are not used anymore/obolete remove utility scripts used for extracting/patching AML blobs compiled by IASL and for updating them in git tree. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: switch to AML API composed DSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: PCST, PCSB opregions and PCIB field into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move PCI0 device definition into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move PCI0._OSC() method into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move _PIC() method into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move PRTP routing table into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move PRTA routing table into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move _PRT() into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move ISA bridge into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move IQST() into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move IQCR() into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move link devices to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: q35: move GSI links to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: piix4: acpi move PCI0 device to SSDTIgor Mammedov
leave Scope(\_SB) definition in DSDT so that iasl would be able to compile DSDT since we are still need definition block for table. After Q35 ASL is converted, DSDT templates will be completly replaced by AML API generated tables. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: piix4: move remaining PCI hotplug bits into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: piix4: move PCI0._PRT() into SSDTIgor Mammedov
PCI routing table for expander buses is build with help of build_prt() using AML API. And it's almost the same as PRT for PCI0 bus except of power-management device. So make existing build_prt() build PRT table for PCI0 bus as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: piix4: move IQST() into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: piix4: move IQCR() into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: pci: move link devices into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move remaining GPE handlers into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move PIIX4 isa-bridge and pm devices into SSDTIgor Mammedov
and also move PRQx fields declaration as it can't be split out into separate patch since fields use PCI0.ISA.P40C operation region and OperationRegion must be declared in the same table as a Field that uses it. If this condition is not statisfied Windows will BSOD ans IASL (make check) will error out as well. For the same reason pm is moved together with isa-bridge as the later refernces P13C OperationRegion from pm device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move COM devices from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move LPT device from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move FDC0 device from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move MOU device from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move KBD device from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move RTC device from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move DBUG() from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: move HPET from DSDT to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: factor out cpu hotplug code from build_ssdt() into separate functionIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: cpuhp: move \_GPE._E02() into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: cpuhp: move PRSC() method into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: cpuhp: move CPST() method into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: cpuhp: move CPMA() method into SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: cpuhp: move CPEJ() method to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: drop unused CPU_STATUS_LEN from DSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: memhp: drop not needed stringify(MEMORY_foo) usageIgor Mammedov
most of MEMORY_foo defines are not shared with ASL anymore and are used only inside of memory_hotplug_acpi_table.c, so move them there and make them strings. As result we can replace stringify(MEMORY_foo) with just MEMORY_foo, which makes code a bit cleaner. No AML change introduced by this patch. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 04:08:46 +0000