aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2010-06-01Monitor: Drop QMP documentation from codeLuiz Capitulino
Previous commit added QMP documentation to the qemu-monitor.hx file, it's is a copy of this information. While it's good to keep it near code, maintaining two copies of the same information is too hard and has little benefit as we don't expect client writers to consult the code to find how to use a QMP command. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-01Merge remote branch 'mst/for_anthony' into HEADAnthony Liguori
2010-06-01virtio-serial-bus: fix ports_map allocation on initAlon Levy
Fix for too small allocation to ports_map Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-31ioapic: improve debuggingBlue Swirl
Add a DPRINTF macro, use it also to see irq deliveries. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-31arm: fix arm kernel boot for non zero start addrLars Munch
Booting an arm kernel has been broken a while when booting from non zero start address. This is due to the order of events: board init loads the kernel and sets register 15 to the start address and then qemu_system_reset reset the cpu making register 15 zero again. This patch fixes the usage of the register 15 start address trick in combination with arm_load_kernel. Signed-off-by: Lars Munch <lars@segv.dk> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-31pci-hotplug: make them aware of pci domain.Isaku Yamahata
add helper function which converts root bus to pci domain. make them aware of pci domain. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31msix: remove duplicated defines.Isaku Yamahata
remove defines which are already defined in pci_regs.h Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci.h: remove unused constants.Isaku Yamahata
So remove unused constants, PCI_STATUS_RESERVED_MASK_LO, PCI_STATUS_RESERVED_MASK_HI, PCI_COMMAND_RESERVED, PCI_COMMAND_RESERVED_MASK_HI. They were used once, but they aren't used anymore. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci: add const to pci_is_express(), pci_config_size().Isaku Yamahata
add const to pci_is_express(), pci_config_size(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci: clean up of pci_set_default_subsystem_id().Isaku Yamahata
Use pci accessor function. don't return value because it always return 0 and the caller doesn't check the return value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-30mc146818rtc: improve debuggingBlue Swirl
Add a separate flag for debugging coalesced interrupts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29pc: improve debuggingBlue Swirl
Add a DPRINTF macro and use it for ISA and PIC interrupts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29apic: improve debuggingBlue Swirl
Add a DPRINTF macro. Use TARGET_FMT_plx for printing target_phys_addr_t items. Add a separate flag for debugging coalescing interrupts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29i8259: improve debuggingBlue Swirl
Add a DPRINTF macro. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-29Pad iommu with an empty slot (necessary for SunOS 4.1.4)Artyom Tarasenko
On the real hardware (SS-5, LX) the MMU is not padded, but aliased. Software shouldn't use aliased addresses, neither should it crash when it uses (on the real hardware it wouldn't). Using empty_slot instead of aliasing can help with debugging such accesses. Signed-off-by: Artyom Tarasenko <atar4qemu@googlemail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-28Fix hw/gt64xxx.c compilation with DEBUG definedRiccardo Magliocchetti
Use TARGET_FMT_plx as format placeholder for target_phys_addr_t Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-28musicpal: Drop redundant reset callJan Kiszka
Reset is now triggered after init, no need for explicit calls anymore. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-28Fix overflow in i440fx_init()Avi Kivity
The ram_size parameter can be larger than an int, so it may be truncated. Fix by using the correct type. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-27vhost_net.c: v2 Fix build failure introduced by ↵Jes Sorensen
0bfcd599e3f5c5679cc7d0165a0a1822e2f60de2 Fix build failure introduced by 0bfcd599e3f5c5679cc7d0165a0a1822e2f60de2 The format statement expects unsigned long on x86_64, but receives unsigned long long, so gcc exits with an error. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-26sparc64: clean up pci bridge mapIgor V. Kovalenko
- remove unused host state and store pci bus pointer only - do not map host state access into unused 1fe.10000000 range - reorder pci region registration - assign pci i/o region to isa_mem_base Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-26sparc64: rename sun4u cpu to Ultrasparc IIiIgor V. Kovalenko
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-24use new cursor struct + functions for vmware vga and sdl.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24Virtio-net: Replace the hardcode 6 with defined ETN_ALENAmos Kong
hw/virtio-net.h: #define ETH_ALEN 6 ETH_ALEN was defined by commit 7967406801aa897fae83caad3278ac85a342adaa Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-05-24Merge remote branch 'qmp/for-anthony' into stagingAnthony Liguori
2010-05-24microblaze: Handle new elf mach nr for sysemu.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-05-22lsi: Fix value overflow in request tag processingJan Kiszka
This fixes a mismerge of 64d564094cac5f72eeaeb950c442b773a00d3586 (wrong patch version): We need to mask the tag value properly to obtain its device ID. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-22sparc32 protect read-only bits in DMA CSR registersArtyom Tarasenko
On a real hardware changing read-only bits has no effect Use a mask common for SCSI and Ethernet registers. The crucial bit is DMA_INTR, because setting or clearing it may produce spurious interrupts. This patch allows booting Solaris 2.3 Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22vmstate: fix breakage by 7e72abc382b700a72549e8147bdea413534eeedcTeLeMan
cirrus_post_load() will be executed twice when loading vm states and then the wrong physical memory will be registered. This issue may lead to crash qemu. Signed-off-by: TeLeMan <geleman@gmail.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Fix %lld or %llx printf format useBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile dma only onceBlue Swirl
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22pckbd: improve debuggingBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile pckbd only onceBlue Swirl
Use a qemu_irq to indicate A20 line changes. Move I/O port 92 to pckbd.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-21axisdev88: Fix passing of kernel cmdline.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-05-21arm_timer: fix oneshot modeRabin Vincent
In oneshot mode, the delta needs to come from the TimerLoad register, not the maximum limit. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21arm_timer: reload timer when enabledRabin Vincent
Reload the timer when TimerControl is written, if the timer is to be enabled. Otherwise, if an earlier write to TimerLoad was done while periodic mode was not set, s->delta may incorrectly still have the value of the maximum limit instead of the value written to TimerLoad. This problem is evident on versatileap on current linux-next, which enables TIMER_CTRL_32BIT before writing to TimerLoad and then enabling periodic mode and starting the timer. This causes the first periodic tick to be scheduled to occur after 0xffffffff periods, leading to a perceived hang while the kernel waits for the first timer tick. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21pflash_cfi01: add device ID read commandMichael Walle
Add support to read manufacturer and device ID. For everything else (eg. lock bits) 0 is returned. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21virtio-blk: fix barrier supportChristoph Hellwig
Before issuing the barrier to the block driver we need to flush our oustanding queue of write requests, as the flush is supposed to be issued after them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-21virtio-blk: Avoid zeroing every request structureStefan Hajnoczi
The VirtIOBlockRequest structure is about 40 KB in size. This patch avoids zeroing every request by only initializing fields that are read. The other fields are either written to or may not be used at all. Oprofile shows about 10% of CPU samples in memset called by virtio_blk_alloc_request(). The workload is dd if=/dev/vda of=/dev/null iflag=direct bs=8k running concurrently 4 times. This patch makes memset disappear to the bottom of the profile. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-20pc: fix segfault introduced by 3d53f5c36ff6Eduard - Gabriel Munteanu
Commit 3d53f5c36ff6 introduced a segfault by erroneously making fw_cfg a 'void **' and passing it around in different ways. Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-19Revert "monitor: Convert do_pci_device_hot_remove() to QObject"Markus Armbruster
We don't want pci_del in QMP. Use device_del instead. This reverts commit 6848d827162fea039f2658414a4adb6164a4f9b0. Conflicts: hw/pci-hotplug.c sysemu.h Signed-off-by: Markus Armbruster <armbru@redhat.com>
2010-05-19Revert "PCI: Convert pci_device_hot_add() to QObject"Markus Armbruster
Short story: We don't want pci_add in QMP. Long story follows. pci_add can do two things: * Hot plug a PCI NIC. device_add is more general. * Hot plug a PCI disk controller, and a drive connected to it. The controller is either virtio-blk-pci (if=virtio) or lsi53c895a (if=scsi). With the latter, the drive is optional. Use drive_add to hotplug additional SCSI drives. Except drive_add is not available in QMP. device_add is more general for controllers and the guest part of drives. I'm working on a more general alternative for the host part of drives. Why am I proposing to remove pci_add from QMP before its replacement is ready? I want it out sooner rather than later, because it isn't fully functional (errors and drive_add are missing), and we do not plan to complete the job. In other words, it's not really usable over QMP now, and it's not what we want for QMP anyway. Since we don't want it to be used over QMP, we should take it out, not leave it around as a trap for the uninitiated. Dan Berrange confirmed that libvirt has no need for pci_add & friends over QMP. This reverts commit 7a344f7ac7bb651d0556a933ed8060d3a9e5d949. Conflicts: hw/pci-hotplug.c sysemu.h Signed-off-by: Markus Armbruster <armbru@redhat.com>
2010-05-18target-ppc: remove dead codeThomas Monjalon
This function had been disabled from the beginning: see 9fddaa0c0cabb610947146a79b4a9a38b0a216e5 cpu_reset() function is in target-ppc/helper.c Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-18target-s390: add firmware codeAlexander Graf
This patch adds a firmware blob to the S390 target. The blob is a simple implementation of a virtio client that tries to read the second stage bootloader from sectors described as of offset 0x20 in the MBR. In combination with an updated zipl this allows for booting from virtio block devices. This firmware is built from the same sources as the second stage bootloader. You can find a virtio capable s390-tools in this repo: git://repo.or.cz/s390-tools.git Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-17Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-05-17Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-05-17ide: Fix ide_dma_cancelKevin Wolf
When cancelling a request, bdrv_aio_cancel may decide that it waits for completion of a request rather than for cancellation. IDE therefore can't abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback of a completed request would use invalid data. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-15Update to a hopefully more future proof FSF addressBlue Swirl
See also 70539e1850ddd3a7ee6f9a8db7bd8e81b85225a4, 8167ee883931cb20c6264fc19d040ce2dc6ceaaa, 530e7615ce3c01882e582c84dc6304ab98a3d5c5 and fad6cb1a565bb73f83fc0e2654489457b489e436. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15Trim unnecessary includesBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15mc146818rtc: remove #ifdef DEBUG_CMOS.Isaku Yamahata
remove #ifdef DEBUG_CMOS by using macro. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 14:52:08 +0000