aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2015-03-10ahci: Migrate IDEStatusJohn Snow
Amazingly, we weren't doing this before. Make sure we migrate the IDEState structure that belongs to the AHCIDevice.IDEBus structure during migrations. No version numbering changes because AHCI is not officially migratable (and we can all see with good reason why) so we do not impact any official builds by altering the stream and leaving it at version 1. This fixes the rerror=stop/werror=stop test case where we wish to migrate a halted job. Previously, the error code would not migrate, so even if the job completed successfully, AHCI would report an error because it would still have the placeholder error code from initialization time. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: support PIO restart for the ISA controllerPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-14-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: make more functions staticPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: commonize io_buffer_index initializationPaolo Bonzini
Resetting the io_buffer_index to 0 is commonized, with the exception of the case within ide_atapi_cmd_reply, where we need to reset this index to 0 prior to the ide_atapi_cmd_reply_end call. Note that not all calls to ide_atapi_cmd_reply_end expect the index to be 0, so setting it there is not appropriate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: migrate initial request state via IDEBusPaolo Bonzini
This only breaks backwards migration compatibility if the bus is in an error state. It is in principle possible to avoid this by making two subsections (one for version 1, and one for version 2, but with the same name) with different "_needed" callbacks. The v1 callback would return true if error_status != 0 and the bus is PATA; the v2 callback would return true if error_status != 0 and the bus is AHCI. Forward migration keeps working. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: place initial state of the current request to IDEBusPaolo Bonzini
This moves more common restarting logic to the core IDE code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: replace set_unit callback with more IDEBus statePaolo Bonzini
Start moving the initial state of the current request to IDEBus, so that AHCI can use it. The set_unit callback is not used anymore once this is done. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: remove restart_cb callbackPaolo Bonzini
With restarts now handled by ide_restart_cb and the IDEDMAOps.restart_dma() member, remove the old restart_cb callback. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: move restart callback to common codePaolo Bonzini
With BMDMA specific excised from the restart functions, create a HBA-agnostic restart callback to be shared between the different HBAs. Change the callback registered with the vmstate_change handler to always point to ide_restart_cb instead of relying on the IDEDMAOps.restart_cb() member. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: pass IDEBus to the restart_cbPaolo Bonzini
Pass the containing IDEBus to the restart_cb instead of the more specific BMDMAState child. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: do not use BMDMA in restart callbackPaolo Bonzini
Whenever an error stops the VM, ide_handle_rw_error does "s->bus->dma->unit = s->unit". So we can just use idebus_active_if. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: introduce ide_register_restart_cbPaolo Bonzini
A helper is added that registers the IDEDMAOp .restart_cb() via qemu_add_vm_change_state_handler instead of requiring each HBA to register the callback themselves. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: prepare to move restart to common codePaolo Bonzini
This patch adds the restart_dma callback and adjusts the ide_restart_dma function to utilize this callback to call the BMDMA-specific restart code instead of statically executing BMDMA-specific code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: start extracting ide_restart_dma out of bmdma_restart_dmaPaolo Bonzini
This patch begins refactoring the restart dma functions out of bmdma to be shared with AHCI and other future IDE HBA implementations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10BlockConf: Call backend functions to detect geometry and blocksizesEkaterina Tumanova
geometry: hd_geometry_guess function autodetects the drive geometry. This patch adds a block backend call, that probes the backing device geometry. If the inner driver method is implemented and succeeds (currently only for DASDs), the blkconf_geometry will pass-through the backing device geometry. Otherwise will fallback to old logic. blocksize: This patch initializes blocksize properties to 0. In order to set the property a blkconf_blocksizes was introduced. If user didn't set physical or logical blocksize, it will retrieve its value from a driver (only succeeds for DASD), otherwise it will set default 512 value. The blkconf_blocksizes call was added to all users of BlkConf. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10virtio-blk: Check return value of blk_aio_ioctlFam Zheng
Since commit 1dc936aa84 (virtio-blk: Use blk_aio_ioctl) we silently lose the request if blk_aio_ioctl returns NULL (not implemented). Fix it by directly returning VIRTIO_BLK_S_UNSUPP as we used to do. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [ kwolf: Fixed build error on win32 ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10scsi: Convert remaining PCI HBAs to realize()Markus Armbruster
These are "am53c974", "dc390", "lsi53c895a", "lsi53c810", "megasas", "megasas-gen2". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425925048-15482-5-git-send-email-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10scsi: Improve error reporting for invalid drive propertyMarkus Armbruster
When setting "realized" fails, scsi_bus_legacy_add_drive() passes the error to qerror_report_err(), then returns an unspecific "Setting drive property failed" error, which is reported further up the call chain. Example: $ qemu-system-x86_64 -nodefaults -S -display none \ > -drive if=scsi,id=foo,file=tmp.qcow2 -global isa-fdc.driveA=foo qemu-system-x86_64: -drive if=scsi,id=foo,file=tmp.qcow2: Property 'scsi-disk.drive' can't take value 'foo', it's in use qemu-system-x86_64: Setting drive property failed qemu-system-x86_64: Initialization of device lsi53c895a failed: Device initialization failed Clean up the obvious way: simply return the original error to the caller. Gets rid of the second message in the above error cascade. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425925048-15482-4-git-send-email-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10hw: Propagate errors through qdev_prop_set_drive()Markus Armbruster
Three kinds of callers: 1. On failure, report the error and abort Passing &error_abort does the job. No functional change. 2. On failure, report the error and exit() This is qdev_prop_set_drive_nofail(). Error reporting moves from qdev_prop_set_drive() to its caller. Because hiding away the error in the monitor right before exit() isn't helpful, replace qerror_report_err() by error_report_err(). Shouldn't make a difference, because qdev_prop_set_drive_nofail() should never be used in QMP context. 3. On failure, report the error and recover This is usb_msd_init() and scsi_bus_legacy_add_drive(). Error reporting and freeing the error object moves from qdev_prop_set_drive() to its callers. Because usb_msd_init() can't run in QMP context, replace qerror_report_err() by error_report_err() there. No functional change. scsi_bus_legacy_add_drive() calling qerror_report_err() is of course inappropriate, but this commit merely makes it more obvious. The next one will clean it up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10scsi: Clean up duplicated error in legacy if=scsi codeMarkus Armbruster
Commit a818a4b changed scsi_bus_legacy_handle_cmdline() to report errors from scsi_bus_legacy_add_drive() with error_report() in addition to returning them. That's inappropriate. Two kinds of callers: 1. realize methods (devices "esp", "virtio-scsi-device" and "spapr-vscsi") The error object gets passed up the call chain until it gets reported again and freed. Example: $ qemu-system-arm -M virt -S -display none \ > -drive if=scsi,id=foo,bus=1,file=tmp.qcow2 \ > -device nec-usb-xhci -device usb-storage,drive=foo \ > -device virtio-scsi-pci qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Property 'scsi-disk.drive' can't take value 'foo', it's in use qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Setting drive property failed qemu-system-arm: -device virtio-scsi-pci: Setting drive property failed qemu-system-arm: -device virtio-scsi-pci: Device initialization failed qemu-system-arm: -device virtio-scsi-pci: Device 'virtio-scsi-pci' could not be initialized The second message in this error cascade comes from scsi_bus_legacy_handle_cmdline(). The error object then gets passed up to the qdev_init() called from virtio_scsi_pci_init_pci(), which reports it again. 2. init methods (devices "am53c974", "dc390", "lsi53c895a", "lsi53c810", "megasas", "megasas-gen2") init methods need to report their errors with qerror_report(). These don't. The inappropriate error_report() papers over the bug. error_report() isn't the same as qerror_report() in QMP context, but this can't actually happen: QMP can still only hot-plug, and callers call scsi_bus_legacy_handle_cmdline() only on cold-plug. Except for sysbus_esp_realize(), but that can't be hot-plugged at all, as far as I can tell. Fix the init methods and drop the inappropriate error_report() in scsi_bus_legacy_handle_cmdline(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425925048-15482-2-git-send-email-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10sun4u: switch m48t59 NVRAM to MMIO accessMark Cave-Ayland
Real sun4u systems memory-map the NVRAM on the (ISA) ebus, so switch over to MMIO from ioport access whilst setting the base year to 1968 as used by Sun systems. This allows all SPARC64 OSs included in my tests to correctly detect the NVRAM IC and read the hardware clock correctly upon boot. Note that this also requires a corresponding OpenBIOS update to r1330 in order to switch the SPARC64 NVRAM accessors over from ioport to MMIO. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10m48t59: add m48t59 sysbus deviceMark Cave-Ayland
This is for subsequent use by the sun4u machine. Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10m48t59: introduce new base-year qdev propertyMark Cave-Ayland
Currently the m48t59 device uses the hardware model in order to determine whether the year value is offset from the hardware value. As this will soon be required by the x59 model, create a qdev base-year property to represent the base year and update the callers appropriately. Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> CC: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10m48t59: let init functions return a Nvram objectHervé Poussineau
Remove left-overs from header file. Move some functions only used by PReP to hw/ppc/prep.c Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> CC: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10m48t59: add a Nvram interfaceHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> CC: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10m48t59: register a QOM type for each nvram type we supportHervé Poussineau
As m48t59 devices can only be created with m48t59_init() or m48t59_init_isa(), we know exactly which nvram types are required. Register only those three types. Remove .model and .size properties as they can be infered from nvram name. Rename type to 'isa-*' (and 'sysbus-*') to do like other devices ISA devices (isa-ide, isa-parallel, isa-serial...) Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> CC: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10m48t59: move ISA ports/memory regions registration to QOM constructorHervé Poussineau
-device m48t59_isa can now be used to create a fully functional nvram. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> CC: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10elf-loader: Provide the possibility to relocate s390 ELF filesThomas Huth
On s390, we would like to load our "BIOS" s390-ccw.img to the end of the RAM. Therefor we need the possibility to relocate the ELF file so that it can also run from different addresses. This patch adds the necessary code to the QEMU ELF loader function. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Message-Id: <1425895973-15239-2-git-send-email-thuth@linux.vnet.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: passing max memory size to acceleratorDominik Dingel
With "KVM: s390: Allow userspace to limit guest memory size" KVM is able to do some optimizations based on the guest memory limit. The guest memory limit is computed by the initial definition and with the notion of hotplugged memory. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1425570981-40609-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10virtio-ccw: Convert to realize()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1425045219-19958-1-git-send-email-armbru@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10virtio-s390: Convert to realize()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1425045337-20138-3-git-send-email-armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10virtio-s390: s390_virtio_device_init() can't fail, simplifyMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1425045337-20138-2-git-send-email-armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-109pfs: remove useless returnMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10milkymist-pfpu: fix GCC 5.0.0 aggressive-loop-optimizations warningRadim Krčmář
man gcc: Warn if in a loop with constant number of iterations the compiler detects undefined behavior in some statement during one or more of the iterations. Milkymist pfpu has no jump instructions, so checking for MICROCODE_WORDS instructions should have kept us in bounds of s->microcode, but i++ allowed one loop too many, hw/misc/milkymist-pfpu.c: In function ‘pfpu_write’: hw/misc/milkymist-pfpu.c:365:20: error: loop exit may only be reached after undefined behavior [-Werror=aggressive-loop-optimizations] if (i++ >= MICROCODE_WORDS) { ^ hw/misc/milkymist-pfpu.c:167:14: note: possible undefined statement is here uint32_t insn = s->microcode[pc]; ^ The code can still access out of bounds, because it presumes that PC register always begins at 0, and we allow writing to it. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10fix GCC 5.0.0 logical-not-parentheses warningsRadim Krčmář
man gcc: Warn about logical not used on the left hand side operand of a comparison. This option does not warn if the RHS operand is of a boolean type. By preferring bool over int where sensible, but without modifying any depending code, make GCC happy in cases like this, qemu-img.c: In function ‘compare_sectors’: qemu-img.c:992:39: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses] if (!!memcmp(buf1, buf2, 512) != res) { hw/ide/core.c:1836 doesn't throw an error, assert(!!s->error == !!(s->status & ERR_STAT)); even thought the second operand is int (and first hunk of this patch has a very similar case), maybe GCC developers still have a little faith in C programmers. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10vhost_net: Add missing 'static' attributeStefan Weil
This fixes a warning from smatch. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10e500: fix memory leakMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de>
2015-03-10sysbus: fix memory leakGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10milkymist.c: fix memory leakGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10macio: fix possible memory leakGonglei
If ret = macio_initfn_ide() is less than 0, the timer_memory will leak the memory it points to. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10sparc/leon3.c: fix memory leakGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10vhost: Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10arm/digic_boards: Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10tpm: Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10xtensa: Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10vfio: Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10vhost-scsi: Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10pl330.c: remove superfluous '\n' around error_setgGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10a9gtimer: remove superfluous '\n' around error_setgGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 02:52:48 +0000