aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2013-03-08pseries: Add cleanup hook for PAPR virtual LAN deviceDavid Gibson
Currently the spapr-vlan device does not supply a cleanup call for its NetClientInfo structure. With current qemu versions, that leads to a SEGV on exit, when net_cleanup() attempts to call the cleanup handlers on all net clients. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-07hw/nand.c: correct the sense of the BUSY/READY status bitKuo-Jung Su
The BIT6 of Status Register(SR): SR[6] behaves the same as R/B# pin SR[6] = 0 indicates the device is busy; SR[6] = 1 means the device is ready Some NAND flash controller (i.e. ftnandc021) relies on the SR[6] to determine if the NAND flash erase/program is success or error timeout. P.S: The exmaple NAND flash datasheet could be found at following link: http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/8FEA549237D2F7674825795800104C26/$File/MX30LF1G08AA,%203V,%201Gb,%20v1.1.pdf Signed-off-by: Kuo-Jung Su <dantesu@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-03-05hw/kvm/arm_gic: Implement support for KVM in-kernel ARM GICPeter Maydell
Implement support for using the KVM in-kernel GIC for ARM. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-03-05hw/arm_gic: Convert ARM GIC classes to use init/realizePeter Maydell
Convert the ARM GIC classes to use init/realize rather than SysBusDevice::init. (We have to do them all in one patch to avoid unconverted subclasses calling a nonexistent SysBusDevice init function in the base class and crashing.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-03-05hw/arm_gic: Add presave/postload hooksPeter Maydell
Add presave/postload hooks to the ARM GIC common base class. These will be used by the KVM in-kernel GIC subclass to sync state between kernel and userspace when migrating. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05ARM: KVM: Add support for KVM on ARM architectureChristoffer Dall
Add basic support for KVM on ARM architecture. Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> [PMM: Minor tweaks and code cleanup, switch to ONE_REG] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-04Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By MORITA Kazutaka (5) and others # Via Stefan Hajnoczi * stefanha/block: block: for HMP commit() operations on 'all', skip non-COW drives sheepdog: add support for connecting to unix domain socket sheepdog: use inet_connect to simplify connect code sheepdog: accept URIs move socket_set_nodelay to osdep.c slirp/tcp_subr.c: fix coding style in tcp_connect dataplane: remove EventPoll in favor of AioContext virtio-blk: fix unplug + virsh reboot ide/macio: Fix macio DMA initialisation.
2013-03-04Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
virtio,vhost,pci,e1000 Mostly bugfixes, but also some ICH work by Laszlo. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 28 Feb 2013 07:13:56 AM CST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (2) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: Set virtio-serial device to have a default of 2 MSI vectors. ICH9 LPC: Reset Control Register, basic implementation Fix guest OS hang when 64bit PCI bar present e1000: unbreak the guest network migration to 1.3 vhost: memory sync fixes
2013-03-04Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori
# By Jason Wang (2) and others # Via Stefan Hajnoczi * stefanha/net: qmp: netdev_add is like -netdev, not -net, fix documentation doc: document -netdev hubport net: reduce the unnecessary memory allocation of multiqueue tap: set IFF_ONE_QUEUE per default tap: forbid creating multiqueue tap when hub is used net: fix unbounded NetQueue net: fix qemu_flush_queued_packets() in presence of a hub
2013-03-04dataplane: remove EventPoll in favor of AioContextPaolo Bonzini
During the review of the dataplane code, the EventPoll API morphed itself (not concidentially) into something very very similar to an AioContext. Thus, it is trivial to convert virtio-blk-dataplane to use AioContext, and a first baby step towards letting dataplane talk directly to the QEMU block layer. The only interesting note is the value-copy of EventNotifiers. At least in my opinion this is part of the EventNotifier API and is even portable to Windows. Of course, in this case you should not close the notifier's underlying file descriptors or handle with event_notifier_cleanup. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04virtio-blk: fix unplug + virsh rebootChristian Borntraeger
virtio-blk registers a vmstate change handler. Unfortunately this handler is not unregistered on unplug, leading to some random crashes if the system is restarted, e.g. via virsh reboot. Lets unregister the vmstate change handler if the device is removed. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04ide/macio: Fix macio DMA initialisation.Mark Cave-Ayland
Commit 07a7484e5d713f1eb7c1c37b18a8ab0d56d88875 accidentally introduced a bug in the initialisation of the second macio DMA device which could cause some DMA operations to segfault QEMU. CC: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-28cadence_gem: Add debug msgs for rx desc movementPeter Crosthwaite
Add some helpful messages that show the rx descriptor pointer moving as packets are rxed. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1ef2eb34dade64d589a69a2bcfd5aaddb7d50164.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: Don't reset rx desc pointer on rx_enPeter Crosthwaite
This doesn't happen in the real hardware. The Zynq TRM explicitly states that this bit has no effect on the rx descriptor pointer ("The receive queue pointer register is unaffected"). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 06fdf92b78ee62d8965779bafd29c8df1a5d2718.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: fix interrupt eventsPeter Crosthwaite
Bits in the ISR were continually mirroring their corresponding TX/RX SR bits. This is incorrect. The ISR bits are only ever set at the time their corresponding event occurs. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: cedfb6d108318846480b416a6041023ea5a353d6.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: factor out can_rx() logic replicationPeter Crosthwaite
The gem_receive() function replicates the logic for whether or not the device can rx. Just call the actual gem_can_receive() function in place. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: bf7f93969f3e01fbc76d68d2955307fdbad11bb1.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: Flush queued packetsPeter Crosthwaite
The device needs to check for queued RX packets when the RX path is re-enabled. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1fa8c88a3b7c654886d0a7484c2463cd4c2a2781.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28m25p80.c: Use QOM classes for part differentiationPeter Crosthwaite
Currently, M25P80 uses an object property to differentiate between flash parts. Changed this over to use QOM sub-classes - the actual names of the different parts are used to create a set of dynamic classes which passes the part info as class data. The object no longer needs to search the known_devices table for itself, instead it just gets its info from its own class. Kept the intermediate class definition private to m25p80.c for the moment, as the expectation is parts will only be added as new entries in the table. We can factor out the TYPE_M25P80 abstraction into a header on a demand basis. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: e24e156d-ff96-4901-997a-e31178b08bee@VA3EHSMHS021.ehs.local Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28xilinx_zynq: Added SD controllersPeter Crosthwaite
The Xilinx Zynq device has two SDHCI controllers. Added to the machine model. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: Coreify the SCUPeter Crosthwaite
Split the SCU in a9mpcore out into its own object definition. mpcore is now just a container for the mpcore components. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: remove old_timer_status fieldPeter Crosthwaite
This field was write only and thus unused. Removed. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: Remove WDT distinctionPeter Crosthwaite
In QEMU emulation, there is no functional difference between the ARM mpcore private timers and watchdogs. Removed all the distinction between the two from arm_mptimer.c and converted it to be just the mptimer. a9mpcore and arm11mpcore just instantiate the same mptimer object twice to get both timer and WDT. If in the future we want to make the WDT functionally different then we can use either QOM hierarchy to derive WDT from from mptimer, or we can add a property "is-wdt" or some such. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: arm11mpcore, a9mpcore: CamelCased type namesPeter Crosthwaite
To conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: CamelCased type namesPeter Crosthwaite
Trivial find replace on type names "timerblock" and "arm_mptimer_state" to conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/pflash_cfi01: Treat read in unknown command state as readPeter Maydell
The code for handling the default "unknown command state" case in pflash_read in pflash_cfi01.c comments "reset state & treat it as a read". However the code doesn't actually do this. Moving the default case to the top of the switch so it can fall through into the read case brings this file into line with pflash_cfi02 and makes the code behave as the comments suggest. The pflash_cfi01 code has always had this bug -- it was presumably introduced when the original author copied the cfi02 code and rearranged the order of the switch statement without noticing that the default case relied on the fall-through. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-3-git-send-email-peter.maydell@linaro.org
2013-02-28hw/pflash_cfi01: Make read after byte-write or erase return statusPeter Maydell
The Intel flash command set requires that a read operation after doing a 'single byte write' command returns the status register; add this case to pflash_read() so we return the correct information. Similarly, the case for the 0x28 flavour of block erase was missing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-2-git-send-email-peter.maydell@linaro.org
2013-02-28hw/ds1338: Fix conversion between 12 hours and 24 hours modes.Antoine Mathys
The proper mapping between 24 hours and 12 hours modes is: 0 12 AM 1-11 1-11 AM 12 12 PM 13-23 1-11 PM Fix code accordingly. Signed-off-by: Antoine Mathys <barsamin@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-27Set virtio-serial device to have a default of 2 MSI vectors.Gal Hammer
The virtio-serial device is expected to use 2 MSI vectors, one for control queue and a second shared for all queues. Signed-off-by: Gal Hammer <ghammer@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-02-27ICH9 LPC: Reset Control Register, basic implementationLaszlo Ersek
This commit does the same for the ICH9 LPC as commit 1ec4ba74 for the PIIX3. For the present we're ignoring the Full Reset (FULL_RST) and System Reset (SYS_RST) bits; the guest can read them back but that's it. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-02-27Fix guest OS hang when 64bit PCI bar presentAlexey Korolev
This patch addresses the issue fully described here: http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg01804.html Linux kernels prior to 2.6.36 do not disable the PCI device during enumeration process. Since lower and higher parts of a 64bit BAR are programmed separately this leads to qemu receiving a request to occupy a completely wrong address region for a short period of time. We have found that the boot process screws up completely if kvm-apic range is overlapped even for a short period of time (it is fine for other regions though). This patch raises the priority of the kvm-apic memory region, so it is never pushed out by PCI devices. The patch is quite safe as it does not touch memory manager. Signed-off-by: Alexey Korolev <akorolex@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-02-27e1000: unbreak the guest network migration to 1.3Michael S. Tsirkin
QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a 1.3 machine during link auto negotiation, the guest link will be set to down. Fix this by just disabling auto negotiation for 1.3 and older. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-02-27net: reduce the unnecessary memory allocation of multiqueueJason Wang
Edivaldo reports a problem that the array of NetClientState in NICState is too large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not used. Instead of static arrays, solving this issue by allocating the queues on demand for both the NetClientState array in NICState and VirtIONetQueue array in VirtIONet. Tested by myself, with single virtio-net-pci device. The memory allocation is almost the same as when multiqueue is not merged. Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-26vhost: memory sync fixesMichael S. Tsirkin
This fixes two bugs related to memory sync during migration: - ram address calculation was missing the chunk address, so the wrong page was dirtied - one after last was used instead of the end address of a region, which might overflow to 0 and cause us to skip the region when the region ends at ~0x0ull. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com>
2013-02-26Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Paolo Bonzini (7) and others # Via Kevin Wolf * kwolf/for-anthony: (22 commits) pc: add compatibility machine types for 1.4 blockdev: enable discard by default qemu-nbd: add --discard option blockdev: add discard suboption to -drive block: implement BDRV_O_UNMAP block: complete all IOs before .bdrv_truncate coroutine: trim down nesting level in perf_nesting test coroutine: move pooling to common code qemu-iotests: Test qcow2 image creation options qemu-iotests: Add qemu-img compare test qemu-img: Add compare subcommand qemu-img: Add "Quiet mode" option block: Add synchronous wrapper for bdrv_co_is_allocated_above block: refuse negative iops and bps values block: use Error in do_check_io_limits() qcow2: support compressed clusters in BlockFragInfo qemu-img: add compressed clusters to BlockFragInfo qemu-img: fix missing space in qemu-img check output qcow2: record fragmentation statistics during check qcow2: introduce check_refcounts_l1/l2() flags ...
2013-02-23grlib-apbuart: Add support of various flagsRonald Hecht
- enable/disable Rx and Tx - Rx and Tx interrupt - Tx FIFO empty and Tx SHIFT empty Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23Typo: replace gptimer by apbuartFabien Chouteau
Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23xhci: fix bad print specifierHervé Poussineau
This fixes the following compilation error: hw/usb/hcd-xhci.c:1156:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘unsigned int’ Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-22pc: add compatibility machine types for 1.4Paolo Bonzini
Adds both pc-i440fx-1.4 and pc-q35-1.4. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22blockdev: enable discard by defaultPaolo Bonzini
Because discard is now a host parameter, we can always fake it as enabled in the guest. This is an extension of the current choice to ignore "not supported" errors from the host when discard_granularity is set to nonzero. The default granularity is set to the logical block size or 4k, whichever is largest, because cluster sizes below 4k are rarely used and 4K is a typical block size for files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22unbreak hw/usb/redirect.c buildGerd Hoffmann
Commit 8550a02d1239415342959f6a32d178bc05c557cc added a streams parameter to usb_wakeup and didn't update redirect.c. Fix it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21vga: fix byteswapping.Gerd Hoffmann
In case host and guest endianness differ the vga code first creates a shared surface (using qemu_create_displaysurface_from), then goes patch the surface format to indicate that the bytes must be swapped. The switch to pixman broke that hack as the format patching isn't propagated into the pixman image, so ui code using the pixman image directly (such as vnc) uses the wrong format. Fix that by adding a byteswap parameter to qemu_create_displaysurface_from, so we'll use the correct format when creating the surface (and the pixman image) and don't have to patch the format afterwards. [ v2: unbreak xen build ] Cc: qemu-stable@nongnu.org Cc: mark.cave-ayland@ilande.co.uk Cc: agraf@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21Merge remote-tracking branch 'kraxel/usb.78' into stagingAnthony Liguori
# By Gerd Hoffmann # Via Gerd Hoffmann * kraxel/usb.78: uas-uas: usb3 streams usb-xhci: usb3 streams usb-core: usb3 streams usb: fix endpoint descriptor ordering usb-redir: simplify packet copy usb: make usb_packet_copy operate on combined packets usb: add usb_ep_set_halted usb-host: remove usb_host_device_close usb-host: move legacy cmd line bits usb-storage: use scsi_req_enqueue return value allow disabling usb smartcard support make usb devices configurable fix scripts/make_device_config.sh usb: Makefile cleanup
2013-02-21ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.cAlin Tomescu
I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU would just hang. However, when I used -m 256, the machine would boot. I looked through the code in hw/ and it seems there is an error when the RAM memory is setup (if my understanding is correct). After patching it, the machine launched and booted successfully with 512MB of RAM. Signed-off-by: Alin Tomescu <tomescu.alin@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21xilinx_axienet.c: Assert no error when making linkPeter Crosthwaite
This gives an awful silent failure when it doesn't work. Assert against link creation failure. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-19uas-uas: usb3 streamsGerd Hoffmann
Add usb3 streams support to the uas (usb attached scsi) emulation. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-xhci: usb3 streamsGerd Hoffmann
Add streams support to the xhci emulation. No secondary streams yet, only linear stream arays are supported for now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-core: usb3 streamsGerd Hoffmann
This patch adds support for usb3 streams to the usb subsystem core. This is just adding a streams field / parameter in a number of places. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb: fix endpoint descriptor orderingGerd Hoffmann
Fix the ordering of the endpoint descriptors for superspeed endpoints: The superspeed companion must come first, possible additional descriptors for the endpoint after that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-redir: simplify packet copyGerd Hoffmann
usb_packet_copy can handle combined packets now, so it isn't needed to special-case them any more. Also use the new usb_packet_size() function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 22:17:40 +0000