aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2018-02-16ppc: move CUDAState and other CUDA-related definitions into separate cuda.h fileMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-16cuda: convert to use the shared mos6522 deviceMark Cave-Ayland
Add the relevant hooks as required for the MacOS timer calibration and delayed SR interrupt. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-15raspi: Raspberry Pi 3 supportPekka Enberg
This patch adds Raspberry Pi 3 support to hw/arm/raspi.c. The differences to Pi 2 are: - Firmware address - Board ID - Board revision The CPU is different too, but that's going to be configured as part of the machine default CPU when we introduce a new machine type. The patch was written from scratch by me but the logic is similar to Zoltán Baldaszti's previous work, which I used as a reference (with permission from the author): https://github.com/bztsrc/qemu-raspi3 Signed-off-by: Pekka Enberg <penberg@iki.fi> [PMM: fixed trailing whitespace on one line] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-15bcm2836: Make CPU type configurablePekka Enberg
This patch adds a "cpu-type" property to BCM2836 SoC in preparation for reusing the code for the Raspberry Pi 3, which has a different processor model. Signed-off-by: Pekka Enberg <penberg@iki.fi> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-15hw/intc/armv7m_nvic: Fix byte-to-interrupt number conversionsPeter Maydell
In many of the NVIC registers relating to interrupts, we have to convert from a byte offset within a register set into the number of the first interrupt which is affected. We were getting this wrong for: * reads of NVIC_ISPR<n>, NVIC_ISER<n>, NVIC_ICPR<n>, NVIC_ICER<n>, NVIC_IABR<n> -- in all these cases we were missing the "* 8" needed to convert from the byte offset to the interrupt number (since all these registers use one bit per interrupt) * writes of NVIC_IPR<n> had the opposite problem of a spurious "* 8" (since these registers use one byte per interrupt) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180209165810.6668-9-peter.maydell@linaro.org
2018-02-15hw/intc/armv7m_nvic: Implement SCRPeter Maydell
We were previously making the system control register (SCR) just RAZ/WI. Although we don't implement the functionality this register controls, we should at least provide the state, including the banked state for v8M. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180209165810.6668-7-peter.maydell@linaro.org
2018-02-15hw/intc/armv7m_nvic: Implement cache ID registersPeter Maydell
M profile cores have a similar setup for cache ID registers to A profile: * Cache Level ID Register (CLIDR) is a fixed value * Cache Type Register (CTR) is a fixed value * Cache Size ID Registers (CCSIDR) are a bank of registers; which one you see is selected by the Cache Size Selection Register (CSSELR) The only difference is that they're in the NVIC memory mapped register space rather than being coprocessor registers. Implement the M profile view of them. Since neither Cortex-M3 nor Cortex-M4 implement caches, we don't need to update their init functions and can leave the ctr/clidr/ccsidr[] fields in their ARMCPU structs at zero. Newer cores (like the Cortex-M33) will want to be able to set these ID registers to non-zero values, though. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180209165810.6668-6-peter.maydell@linaro.org
2018-02-15hw/intc/armv7m_nvic: Implement v8M CPPWR registerPeter Maydell
The Coprocessor Power Control Register (CPPWR) is new in v8M. It allows software to control whether coprocessors are allowed to power down and lose their state. QEMU doesn't have any notion of power control, so we choose the IMPDEF option of making the whole register RAZ/WI (indicating that no coprocessors can ever power down and lose state). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180209165810.6668-5-peter.maydell@linaro.org
2018-02-15hw/intc/armv7m_nvic: Implement M profile cache maintenance opsPeter Maydell
For M profile cores, cache maintenance operations are done by writing to special registers in the system register space. For QEMU, cache operations are always NOPs, since we don't implement the cache. Implementing these explicitly avoids a spurious LOG_GUEST_ERROR when the guest uses them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180209165810.6668-4-peter.maydell@linaro.org
2018-02-15hw/intc/armv7m_nvic: Fix ICSR PENDNMISET/CLR handlingPeter Maydell
The PENDNMISET/CLR bits in the ICSR should be RAZ/WI from NonSecure state if the AIRCR.BFHFNMINS bit is zero. We had misimplemented this as making the bits RAZ/WI from both Secure and NonSecure states. Fix this bug by checking attrs.secure so that Secure code can pend and unpend NMIs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180209165810.6668-3-peter.maydell@linaro.org
2018-02-15hw/intc/armv7m_nvic: Don't hardcode M profile ID registers in NVICPeter Maydell
Instead of hardcoding the values of M profile ID registers in the NVIC, use the fields in the CPU struct. This will allow us to give different M profile CPU types different ID register values. This commit includes the addition of the missing ID_ISAR5, which exists as RES0 in both v7M and v8M. (The values of the ID registers might be wrong for the M4 -- this commit leaves the behaviour there unchanged.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180209165810.6668-2-peter.maydell@linaro.org
2018-02-15hw/arm/aspeed: simplify using the 'unimplemented device' for aspeed_soc.ioPhilippe Mathieu-Daudé
(qemu) info mtree address-space: cpu-memory-0 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, rom): aspeed.boot_rom - 000000001e600000-000000001e7fffff (prio -1, i/o): aspeed_soc.io + 000000001e600000-000000001e7fffff (prio -1000, i/o): aspeed_soc.io 000000001e620000-000000001e6200ff (prio 0, i/o): aspeed.smc.ast2500-fmc 000000001e630000-000000001e6300ff (prio 0, i/o): aspeed.smc.ast2500-spi1 000000001e631000-000000001e6310ff (prio 0, i/o): aspeed.smc.ast2500-spi2 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180209085755.30414-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-15hw/arm/aspeed: directly map the serial device to the system address spacePhilippe Mathieu-Daudé
(qemu) info mtree address-space: cpu-memory-0 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, rom): aspeed.boot_rom 000000001e600000-000000001e7fffff (prio -1, i/o): aspeed_soc.io - 000000001e784000-000000001e78401f (prio 0, i/o): serial 000000001e620000-000000001e6200ff (prio 0, i/o): aspeed.smc.ast2500-fmc 000000001e630000-000000001e6300ff (prio 0, i/o): aspeed.smc.ast2500-spi1 [...] 000000001e720000-000000001e728fff (prio 0, ram): aspeed.sram 000000001e782000-000000001e782fff (prio 0, i/o): aspeed.timer + 000000001e784000-000000001e78401f (prio 0, i/o): serial 000000001e785000-000000001e78501f (prio 0, i/o): aspeed.wdt 000000001e785020-000000001e78503f (prio 0, i/o): aspeed.wdt Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180209085755.30414-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* CAN bus (will be under network maintainner) * scsi-block opblockers (myself) * Dirty log bitmap cleanup (myself) * SDHCI improvements and tests (Philippe) * HAX support for larger guest sizese (Yu Ning) # gpg: Signature made Tue 13 Feb 2018 15:37:14 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (48 commits) travis: use libgcc-4.8-dev (libgcc-6-dev is not available on Ubuntu 14.04) memory: unify loops to sync dirty log bitmap memory: hide memory_region_sync_dirty_bitmap behind DirtyBitmapSnapshot memory: remove memory_region_test_and_clear_dirty g364fb: switch to using DirtyBitmapSnapshot sdhci: add Spec v4.2 register definitions sdhci: add a check_capab_v3() qtest sdhci: check Spec v3 capabilities qtest hw/arm/xilinx_zynqmp: enable the UHS-I mode hw/arm/xilinx_zynqmp: fix the capabilities/spec version to match the datasheet hw/arm/fsl-imx6: implement SDHCI Spec. v3 hw/arm/bcm2835_peripherals: change maximum block size to 1kB hw/arm/bcm2835_peripherals: implement SDHCI Spec v3 sdhci: implement CMD/DAT[] fields in the Present State register sdhci: implement UHS-I voltage switch sdbus: add trace events sdhci: implement the Host Control 2 register (tuning sequence) sdhci: rename the hostctl1 register sdhci: add support for v3 capabilities hw/arm/xilinx_zynq: fix the capabilities register to match the datasheet ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13virtio-balloon: include statistics of disk/file cachesTomáš Golembiovský
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13lpc: drop pcie host dependencyMichael S. Tsirkin
Doesn't look like that header is used. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13hw/pci-bridge: fix pcie root port's IO hints capabilityMarcel Apfelbaum
The gen_pcie_root_port mem-reserve and pref32-reserve properties are defined as size (so uint64_t), but passed as uint32_t when building the 'IO hints' vendor specific capability. Passing 4G (or more) gets truncated and passed as a zero reservation. Is not a huge issue since the guest firmware will always compare the hints with the default value and take the maximum. Fix it by passing the values as uint64_t and failing to init the gen_pcie_root_port id invalid values are used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13virtio-balloon: unref the memory region before continuingTiwei Bie
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13memory: hide memory_region_sync_dirty_bitmap behind DirtyBitmapSnapshotPaolo Bonzini
Simplify the users of memory_region_snapshot_and_clear_dirty, so that they do not have to call memory_region_sync_dirty_bitmap explicitly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13g364fb: switch to using DirtyBitmapSnapshotPaolo Bonzini
This removes the last user of memory_region_test_and_clear_dirty outside memory.c. Tested-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13sdhci: add Spec v4.2 register definitionsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180208164818.7961-31-f4bug@amsat.org>
2018-02-13hw/arm/xilinx_zynqmp: enable the UHS-I modePhilippe Mathieu-Daudé
see the Xilinx datasheet "UG1085" (v1.7) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-28-f4bug@amsat.org>
2018-02-13hw/arm/xilinx_zynqmp: fix the capabilities/spec version to match the datasheetPhilippe Mathieu-Daudé
checking Xilinx datasheet "UG1085" (v1.7) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-27-f4bug@amsat.org>
2018-02-13hw/arm/fsl-imx6: implement SDHCI Spec. v3Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-26-f4bug@amsat.org>
2018-02-13hw/arm/bcm2835_peripherals: change maximum block size to 1kBPhilippe Mathieu-Daudé
following the datasheet. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-25-f4bug@amsat.org>
2018-02-13hw/arm/bcm2835_peripherals: implement SDHCI Spec v3Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-24-f4bug@amsat.org>
2018-02-13sdhci: implement CMD/DAT[] fields in the Present State registerPhilippe Mathieu-Daudé
[based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2015.2] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-23-f4bug@amsat.org>
2018-02-13sdhci: implement UHS-I voltage switchPhilippe Mathieu-Daudé
[based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2015.2] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-22-f4bug@amsat.org>
2018-02-13sdbus: add trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-21-f4bug@amsat.org>
2018-02-13sdhci: implement the Host Control 2 register (tuning sequence)Philippe Mathieu-Daudé
[based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2015.2] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-20-f4bug@amsat.org>
2018-02-13sdhci: rename the hostctl1 registerPhilippe Mathieu-Daudé
As per the Spec v3.00 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-19-f4bug@amsat.org>
2018-02-13sdhci: add support for v3 capabilitiesPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-18-f4bug@amsat.org>
2018-02-13hw/arm/xilinx_zynq: fix the capabilities register to match the datasheetPhilippe Mathieu-Daudé
checking Xilinx datasheet "UG585" (v1.12.1) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-17-f4bug@amsat.org>
2018-02-13hw/arm/exynos4210: add a comment about a very similar SDHCI (Spec. v2)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-16-f4bug@amsat.org>
2018-02-13hw/arm/exynos4210: access the 64-bit capareg with qdev_prop_set_uint64()Philippe Mathieu-Daudé
We only set a 32-bit value, but this is a good practice in case this code is used as reference. (missed in 5efc9016e52) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-15-f4bug@amsat.org>
2018-02-13sdhci: check Spec v2 capabilities (DMA and 64-bit bus)Philippe Mathieu-Daudé
Incorrect value will throw an error. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-14-f4bug@amsat.org>
2018-02-13sdhci: Fix 64-bit ADMA2Sai Pavan Boddu
The 64-bit ADMA address is not converted to the cpu endianes correctly. This patch fixes the issue and uses a valid mask for the attribute data. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> [AF: Re-write commit message] Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-13-f4bug@amsat.org>
2018-02-13sdhci: replace DMA magic value by BLOCK_SIZE_MASKPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-12-f4bug@amsat.org>
2018-02-13sdhci: check the Spec v1 capabilities correctnessPhilippe Mathieu-Daudé
Incorrect value will throw an error. Note than Spec v2 is supported by default. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-11-f4bug@amsat.org>
2018-02-13sdhci: simplify sdhci_get_fifolen()Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-10-f4bug@amsat.org>
2018-02-13sdhci: use a numeric value for the default CAPAB registerPhilippe Mathieu-Daudé
using many #defines is not portable when scaling to different HCI. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-9-f4bug@amsat.org>
2018-02-13sdhci: add a 'spec_version property' (default to v2)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-8-f4bug@amsat.org>
2018-02-13sdhci: use error_propagate(local_err) in realize()Philippe Mathieu-Daudé
avoid the "errp && *errp" pattern (not recommended in "qapi/error.h" comments). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-2-f4bug@amsat.org>
2018-02-13hw/net/can: interrupt cleanupPaolo Bonzini
Define two functions to update the interrupt state, and call them on loadvm. This removes the need to migrate the state as part of vmstate_kvaser_pci. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13hw/net/can: MIOe-3680 PCI (dual SJA1000 channel) emulationDeniz Eren
Signed-off-by: Deniz Eren <deniz.eren@icloud.com> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13hw/net/can: PCM-3680I PCI (dual SJA1000 channel) emulationDeniz Eren
Signed-off-by: Deniz Eren <deniz.eren@icloud.com> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13hw/net/can: Kvaser PCI CAN-S (single SJA1000 channel) emulationPavel Pisa
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13hw/net/can: SJA1000 chip register level emulation for QEMUPavel Pisa
The core SJA1000 support is independent of following patches which map SJA1000 chip to PCI boards. The work is based on Jin Yang GSoC 2013 work funded by Google and mentored in frame of RTEMS project GSoC slot donated to QEMU. Rewritten for QEMU-2.0+ versions and architecture cleanup by Pavel Pisa (Czech Technical University in Prague). Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13net/can: simple messages transport implementation for QEMUPavel Pisa
The CanBusState state structure is created for each emulated CAN channel. Individual clients/emulated CAN interfaces or host interface connection registers to the bus by CanBusClientState structure. The CAN core is prepared to support connection to the real host CAN bus network. The commit with such support for Linux SocketCAN follows. Implementation is as simple as possible. There is no state to be migrated, and messages prioritization and queuing are not considered for now. But it is intended to be extended when need arises. Development repository and more documentation at https://gitlab.fel.cvut.cz/canbus/qemu-canbus The work is based on Jin Yang GSoC 2013 work funded by Google and mentored in frame of RTEMS project GSoC slot donated to QEMU. Rewritten for QEMU-2.0+ versions and architecture cleanup by Pavel Pisa (Czech Technical University in Prague). Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 08:19:25 +0000