aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2018-03-26hw/net/can: Fix segfaults when using the devices without busThomas Huth
The CAN devices can currently be used to crash QEMU, e.g.: $ x86_64-softmmu/qemu-system-x86_64 -device kvaser_pci Segmentation fault (core dumped) So we've got to add a proper check here that the corresponding bus is available. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1521193892-15552-2-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26virtio_net: flush uncompleted TX on resetGreg Kurz
If the backend could not transmit a packet right away for some reason, the packet is queued for asynchronous sending. The corresponding vq element is tracked in the async_tx.elem field of the VirtIONetQueue, for later freeing when the transmission is complete. If a reset happens before completion, virtio_net_tx_complete() will push async_tx.elem back to the guest anyway, and we end up with the inuse flag of the vq being equal to -1. The next call to virtqueue_pop() is then likely to fail with "Virtqueue size exceeded". This can be reproduced easily by starting a guest with an hubport backend that is not connected to a functional network, eg, -device virtio-net-pci,netdev=hub0 -netdev hubport,id=hub0,hubid=0 and no other -netdev hubport,hubid=0 on the command line. The appropriate fix is to ensure that such an asynchronous transmission cannot survive a device reset. So for all queues, we first try to send the packet again, and eventually we purge it if the backend still could not deliver it. CC: qemu-stable@nongnu.org Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com> Buglink: https://github.com/open-power-host-os/qemu/issues/37 Signed-off-by: Greg Kurz <groug@kaod.org> Tested-by: R. Nageswara Sastry <nasastry@in.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-25Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180323' into staging target-arm queue: * arm/translate-a64: don't lose interrupts after unmasking via write to DAIF * sdhci: fix incorrect use of Error * * hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses * hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15 * i.MX: Support serial RS-232 break properly * mach-virt: Set VM's SMBIOS system version to mc->name * target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK * target/arm: Factor out code to calculate FSR for debug exceptions * target/arm: Set FSR for BKPT, BRK when raising exception * target/arm: Always set FAR to a known unknown value for debug exceptions # gpg: Signature made Fri 23 Mar 2018 18:48:57 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180323: target/arm: Always set FAR to a known unknown value for debug exceptions target/arm: Set FSR for BKPT, BRK when raising exception target/arm: Factor out code to calculate FSR for debug exceptions target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK mach-virt: Set VM's SMBIOS system version to mc->name i.MX: Support serial RS-232 break properly hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15 hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses sdhci: fix incorrect use of Error * arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXIT Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23mach-virt: Set VM's SMBIOS system version to mc->nameWei Huang
Instead of using "1.0" as the system version of SMBIOS, we should use mc->name for mach-virt machine type to be consistent other architectures. With this patch, "dmidecode -t 1" (e.g., "-M virt-2.12,accel=kvm") will show: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: virt-2.12 Serial Number: Not Specified ... instead of: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: 1.0 Serial Number: Not Specified ... For backward compatibility, we allow older machine types to keep "1.0" as the default system version. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180322212318.7182-1-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23i.MX: Support serial RS-232 break properlyTrent Piepho
Linux does not detect a break from this IMX serial driver as a magic sysrq. Nor does it note a break in the port error counts. The former is because the Linux driver uses the BRCD bit in the USR2 register to trigger the RS-232 break handler in the kernel, which is where sysrq hooks in. The emulated UART was not setting this status bit. The latter is because the Linux driver expects, in addition to the BRK bit, that the ERR bit is set when a break is read in the FIFO. A break should also count as a frame error, so add that bit too. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Message-id: 20180320013657.25038-1-tpiepho@impinj.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15Peter Maydell
The BCM2836 uses a Cortex-A7, not a Cortex-A15. Update the device to use the correct CPU. https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836/QA7_rev3.4.pdf When the BCM2836 was introduced (bad5623690b) the Cortex-A7 was not available, so the very similar Cortex-A15 was used. Since dcf578ed8ce we can model the correct core. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180319110215.16755-1-peter.maydell@linaro.org
2018-03-23hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accessesPeter Maydell
If the GIC has the security extension support enabled, then a non-secure access to ICC_PMR must take account of the non-secure view of interrupt priorities, where real priorities 0x00..0x7f are secure-only and not visible to the non-secure guest, and priorities 0x80..0xff are shown to the guest as if they were 0x00..0xff. We had the logic here wrong: * on reads, the priority is in the secure range if bit 7 is clear, not if it is set * on writes, we want to set bit 7, not mask everything else Our ICC_RPR read code had the same error as ICC_PMR. (Compare the GICv3 spec pseudocode functions ICC_RPR_EL1 and ICC_PMR_EL1.) Fixes: https://bugs.launchpad.net/qemu/+bug/1748434 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180315133441.24149-1-peter.maydell@linaro.org
2018-03-23sdhci: fix incorrect use of Error *Paolo Bonzini
Detected by Coverity (CID 1386072, 1386073, 1386076, 1386077). local_err was unused, and this made the static analyzer unhappy. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20180320151355.25854-1-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23hw/rdma: Fix 32-bit compilationYuval Shaia
Use the correct printf formats, so that a 32-bit compile doesn't spit out lots of warnings about %lx being incompatible with uint64_t. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180322095220.9976-4-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Use correct print format in CHK_ATTR macroYuval Shaia
Macro should not cast the given variable to u64 instead it should use the supplied format argument (fmt). Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180322095220.9976-3-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Change host_virt to void *Yuval Shaia
To avoid compilation warnings on 32-bit machines: rdma_backend.c: In function 'rdma_backend_create_mr': rdma_backend.c:409:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] mr->ibmr = ibv_reg_mr(pd->ibpd, (void *)addr, length, access); Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180322095220.9976-2-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: fix clang compilation errorsMarcel Apfelbaum
Fix some enum castings and extra parentheses. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20180321140316.96045-1-marcel@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
2018-03-23rdma: fix up include directivesMichael S. Tsirkin
Our rule right now is to use <> for external headers only. RDMA code violates that, fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Add support for Query QP verb to pvrdma deviceYuval Shaia
This IB verb is needed by some applications - implement it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Add Query QP operationYuval Shaia
This operation is needed by rdma devices - implement it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23s390x/pci: forbid multifunction pci deviceYi Min Zhao
Currently we don't support pci multifunction. If a pci with multifucntion is plugged, the guest will spin forever. This patch fixes this. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-22Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Multiboot patches # gpg: Signature made Wed 21 Mar 2018 14:38:36 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: tests/multiboot: Add .gitignore tests/multiboot: Add tests for the a.out kludge tests/multiboot: Test exit code for every qemu run multiboot: Check validity of mh_header_addr multiboot: Reject kernels exceeding the address space Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-21multiboot: Check validity of mh_header_addrKevin Wolf
I couldn't find a case where this prevents something bad from happening that isn't already caught by other checks, but let's err on the safe side and check that mh_header_addr is as expected. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jack Schwartz <jack.schwartz@oracle.com>
2018-03-21multiboot: Reject kernels exceeding the address spaceKevin Wolf
The code path where mh_load_end_addr is non-zero in the Multiboot header checks that mh_load_end_addr >= mh_load_addr and so mb_load_size is checked. However, mb_load_size is not checked when calculated from the file size, when mh_load_end_addr is 0. If the kernel binary size is larger than can fit in the address space after load_addr, we ended up with a kernel_size that is smaller than load_size, which means that we read the file into a too small buffer. Add a check to reject kernel files with such Multiboot headers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jack Schwartz <jack.schwartz@oracle.com>
2018-03-21tpm: CRB: query backend for TPM established flagStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-21tpm: CRB: reset locAssigned upon relinquishing localityStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-21tpm: CRB: set registers to 0 by defaultStefan Berger
Initialize all registers of the CRB device to 0. This clears a few flags upon a reset. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-21tpm: CRB: Set tpmRegValidSts flag to '1' in device resetStefan Berger
Fix the initialization of the tpmRegValidSts flag and set it to '1' during device reset without expecting a write to another register. This seems to also be the default behavior of real hardware. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20vhost: Huge page align and mergeDr. David Alan Gilbert
Align RAMBlocks to page size alignment, and adjust the merging code to deal with partial overlap due to that alignment. This is needed for postcopy so that we can place/fetch whole hugepages when under userfault. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Wire up POSTCOPY_END notifyDr. David Alan Gilbert
Wire up a call to VHOST_USER_POSTCOPY_END message to the vhost clients right before we ask the listener thread to shutdown. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost-user: Add VHOST_USER_POSTCOPY_END messageDr. David Alan Gilbert
This message is sent just before the end of postcopy to get the client to stop using userfault since we wont respond to any more requests. It should close userfaultfd so that any other pages get mapped to the backing file automatically by the kernel, since at this point we know we've received everything. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Add vhost wakerDr. David Alan Gilbert
Register a waker function in vhost-user code to be notified when pages arrive or requests to previously mapped pages get requested. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Resolve client addressDr. David Alan Gilbert
Resolve fault addresses read off the clients UFD into RAMBlock and offset, and call back to the postcopy code to ask for the page. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine and x86 queue, 2018-03-19 * cpu_model/cpu_type cleanups * x86: Fix on Intel Processor Trace CPUID checks # gpg: Signature made Mon 19 Mar 2018 20:07:14 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: i386: Disable Intel PT if packets IP payloads have LIP values cpu: drop unnecessary NULL check and cpu_common_class_by_name() cpu: get rid of unused cpu_init() defines Use cpu_create(type) instead of cpu_init(cpu_model) cpu: add CPU_RESOLVING_TYPE macro tests: add machine 'none' with -cpu test nios2: 10m50_devboard: replace cpu_model with cpu_type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-20Merge remote-tracking branch 'remotes/ericb/tags/pull-qapi-2018-03-12-v4' ↵Peter Maydell
into staging qapi patches for 2018-03-12, 2.12 softfreeze - Marc-André Lureau: 0/4 qapi: generate a literal qobject for introspection - Max Reitz: 0/7 block: Handle null backing link - Daniel P. Berrange: chardev: tcp: postpone TLS work until machine done - Peter Xu: 00/23 QMP: out-of-band (OOB) execution support - Vladimir Sementsov-Ogievskiy: 0/2 block latency histogram - Eric Blake: qapi: Pass '-u' when doing non-silent diff # gpg: Signature made Mon 19 Mar 2018 19:59:04 GMT # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-qapi-2018-03-12-v4: (38 commits) qapi: Pass '-u' when doing non-silent diff qapi: add block latency histogram interface block/accounting: introduce latency histogram tests: qmp-test: add oob test tests: qmp-test: verify command batching qmp: add command "x-oob-test" monitor: enable IO thread for (qmp & !mux) typed qmp: isolate responses into io thread qmp: support out-of-band (oob) execution qapi: introduce new cmd option "allow-oob" monitor: send event when command queue full qmp: add new event "command-dropped" monitor: separate QMP parser and dispatcher monitor: let suspend/resume work even with QMPs monitor: let suspend_cnt be thread safe monitor: introduce monitor_qmp_respond() qmp: introduce QMPCapability monitor: allow using IO thread for parsing monitor: let mon_list be tail queue monitor: unify global init ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-20vhost+postcopy: Stash RAMBlock and offsetDr. David Alan Gilbert
Stash the RAMBlock and offset for later use looking up addresses. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Send address back to qemuDr. David Alan Gilbert
We need a better way, but at the moment we need the address of the mappings sent back to qemu so it can interpret the messages on the userfaultfd it reads. This is done as a 3 stage set: QEMU -> client set_mem_table mmap stuff, get addresses client -> qemu here are the addresses qemu -> client OK - now you can use them That ensures that qemu has registered the new addresses in it's userfault code before the client starts accessing them. Note: We don't ask for the default 'ack' reply since we've got our own. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20postcopy+vhost-user: Split set_mem_table for postcopyDr. David Alan Gilbert
Split the set_mem_table routines in both qemu and libvhost-user because the postcopy versions are going to be quite different once changes in the later patches are added. However, this patch doesn't produce any functional change, just the split. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Transmit 'listen' to slaveDr. David Alan Gilbert
Notify the vhost-user slave on reception of the 'postcopy-listen' event from the source. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Register shared ufd with postcopyDr. David Alan Gilbert
Register the UFD that comes in as the response to the 'advise' method with the postcopy code. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' messageDr. David Alan Gilbert
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE message on an incoming advise. Later patches will fill in the behaviour/contents of the message. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20postcopy: Add vhost-user flag for postcopy and check itDr. David Alan Gilbert
Add a vhost feature flag for postcopy support, and use the postcopy notifier to check it before allowing postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20hw/acpi-build: build SRAT memory affinity structures for DIMM devicesHaozhong Zhang
ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity domain of a NVDIMM SPA range must match with corresponding entry in SRAT table. The address ranges of vNVDIMM in QEMU are allocated from the hot-pluggable address space, which is entirely covered by one SRAT memory affinity structure. However, users can set the vNVDIMM proximity domain in NFIT SPA range structure by the 'node' property of '-device nvdimm' to a value different than the one in the above SRAT memory affinity structure. In order to solve such proximity domain mismatch, this patch builds one SRAT memory affinity structure for each DIMM device present at boot time, including both PC-DIMM and NVDIMM, with the proximity domain specified in '-device pc-dimm' or '-device nvdimm'. The remaining hot-pluggable address space is covered by one or multiple SRAT memory affinity structures with the proximity domain of the last node as before. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20qmp: distinguish PC-DIMM and NVDIMM in MemoryDeviceInfoListHaozhong Zhang
It may need to treat PC-DIMM and NVDIMM differently, e.g., when deciding the necessity of non-volatile flag bit in SRAT memory affinity structures. A new field 'nvdimm' is added to the union type MemoryDeviceInfo for such purpose. Its type is currently PCDIMMDeviceInfo and will be updated when necessary in the future. It also fixes "info memory-devices"/query-memory-devices which currently show nvdimm devices as dimm devices since object_dynamic_cast(obj, TYPE_PC_DIMM) happily cast nvdimm to TYPE_PC_DIMM which it's been inherited from. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20pc-dimm: make qmp_pc_dimm_device_list() sort devices by addressHaozhong Zhang
Make qmp_pc_dimm_device_list() return sorted by start address list of devices so that it could be reused in places that would need sorted list*. Reuse existing pc_dimm_built_list() to get sorted list. While at it hide recursive callbacks from callers, so that: qmp_pc_dimm_device_list(qdev_get_machine(), &list); could be replaced with simpler: list = qmp_pc_dimm_device_list(); * follow up patch will use it in build_srat() Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20hw/pci: remove obsolete PCIDevice->init()Philippe Mathieu-Daudé
All PCI devices are now QOM'ified. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-19qapi: Replace qobject_to_X(o) by qobject_to(X, o)Max Reitz
This patch was generated using the following Coccinelle script: @@ expression Obj; @@ ( - qobject_to_qnum(Obj) + qobject_to(QNum, Obj) | - qobject_to_qstring(Obj) + qobject_to(QString, Obj) | - qobject_to_qdict(Obj) + qobject_to(QDict, Obj) | - qobject_to_qlist(Obj) + qobject_to(QList, Obj) | - qobject_to_qbool(Obj) + qobject_to(QBool, Obj) ) and a bit of manual fix-up for overly long lines and three places in tests/check-qjson.c that Coccinelle did not find. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-4-mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: swap order from qobject_to(o, X), rebase to master, also a fix to latent false-positive compiler complaint about hw/i386/acpi-build.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19hw/arm/raspi: Provide spin-loop code for AArch64 CPUsPeter Maydell
The raspi3 has AArch64 CPUs, which means that our smpboot code for keeping the secondary CPUs in a pen needs to have a version for A64 as well as A32. Without this, the secondary CPUs go into an infinite loop of taking undefined instruction exceptions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-10-peter.maydell@linaro.org
2018-03-19hw/arm/bcm2836: Hardcode correct CPU typePeter Maydell
Now we have separate types for BCM2386 and BCM2387, we might as well just hard-code the CPU type they use rather than having it passed through as an object property. This then lets us put the initialization of the CPU object in init rather than realize. Note that this change means that it's no longer possible on the command line to use -cpu to ask for a different kind of CPU than the SoC supports. This was never a supported thing to do anyway; we were just not sanity-checking the command line. This does require us to only build the bcm2837 object on TARGET_AARCH64 configs, since otherwise it won't instantiate due to the missing cortex-a53 device and "make check" will fail. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-9-peter.maydell@linaro.org
2018-03-19hw/arm/bcm2836: Use correct affinity values for BCM2837Peter Maydell
The BCM2837 sets the Aff1 field of the MPIDR affinity values for the CPUs to 0, whereas the BCM2836 uses 0xf. Set this correctly, as it is required for Linux to boot. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-8-peter.maydell@linaro.org
2018-03-19hw/arm/bcm2836: Create proper bcm2837 devicePeter Maydell
The bcm2837 is pretty similar to the bcm2836, but it does have some differences. Notably, the MPIDR affinity aff1 values it sets for the CPUs are 0x0, rather than the 0xf that the bcm2836 uses, and if this is wrong Linux will not boot. Rather than trying to have one device with properties that configure it differently for the two cases, create two separate QOM devices for the two SoCs. We use the same approach as hw/arm/aspeed_soc.c and share code and have a data table that might differ per-SoC. For the moment the two types don't actually have different behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-7-peter.maydell@linaro.org
2018-03-19hw/arm/bcm2836: Rename bcm2836 type/struct to bcm283xPeter Maydell
Our BCM2836 type is really a generic one that can be any of the bcm283x family. Rename it accordingly. We change only the names which are visible via the header file to the rest of the QEMU code, leaving private function names in bcm2836.c as they are. This is a preliminary to making bcm283x be an abstract parent class to specific types for the bcm2836 and bcm2837. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-6-peter.maydell@linaro.org
2018-03-19hw/arm/bcm2386: Fix parent type of bcm2386Peter Maydell
The TypeInfo and state struct for bcm2386 disagree about what the parent class is -- the TypeInfo says it's TYPE_SYS_BUS_DEVICE, but the BCM2386State struct only defines the parent_obj field as DeviceState. This would have caused problems if anything actually tried to treat the object as a TYPE_SYS_BUS_DEVICE. Fix the TypeInfo to use TYPE_DEVICE as the parent, since we don't need any of the additional functionality TYPE_SYS_BUS_DEVICE provides. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-5-peter.maydell@linaro.org
2018-03-19hw/arm/boot: If booting a kernel in EL2, set SCR_EL3.HCEPeter Maydell
If we're directly booting a Linux kernel and the CPU supports both EL3 and EL2, we start the kernel in EL2, as it expects. We must also set the SCR_EL3.HCE bit in this situation, so that the HVC instruction is enabled rather than UNDEFing. Otherwise at least some kernels will panic when trying to initialize KVM in the guest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180313153458.26822-4-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-08 07:12:36 +0000